Synthesis of Densely Packaged,Ultrasmall Pt02 Clusters within a Thioether‐Functionalized MOF: Catalytic Activity in Industrial Reactions at Low Temperature

The gram‐scale synthesis, stabilization, and characterization of well‐defined ultrasmall subnanometric catalytic clusters on solids is a challenge. The chemical synthesis and X‐ray snapshots of Pt⁰₂ clusters, homogenously distributed and densely packaged within the channels of a metal–organic framework, is presented. This hybrid material catalyzes efficiently, and even more importantly from an economic and environmental viewpoint, at low temperature (25 to 140 °C), energetically costly industrial reactions in the gas phase such as HCN production, CO₂ methanation, and alkene hydrogenations. These results open the way for the design of precisely defined catalytically active ultrasmall metal clusters in solids for technically easier, cheaper, and dramatically less‐dangerous industrial reactions.     

Electrochemical Synthesis and Catalytic Properties of Encapsulated Metal Clusters within Zeolitic Imidazolate Frameworks

It is very interesting and also a big challenge to encapsulate metal clusters within microporous solids to expand their application diversity. For this target, herein, we present an electrochemical synthesis strategy for the encapsulation of noble metals (Au, Pd, Pt) within ZIF‐8 cavities. In this method, metal precursors of AuCl₄^2?, PtCl₆^2?, and PdCl₄^2? are introduced into ZIF‐8 crystals during the concurrent crystallization of ZIF‐8 at the anode. As a consequence, very small metal clusters with sizes around 1.2 nm are obtained within ZIF‐8 crystals after hydrogen reduction; these clusters exhibit high thermal stability, as evident from the good maintenance of their original sizes after a high‐temperature test. The catalytic properties of the encapsulated metal clusters within ZIF‐8 are evaluated for CO oxidations. Because of the small pore window of ZIF‐8 (0.34 nm) and the confinement effect of small pores, about 80 % of the metal clusters (fractions of 0.74, 0.77, and 0.75 for Au, Pt, and Pd in ZIF‐8, respectively) retain their catalytic activity after exposure to the organosulfur poison thiophene (0.46 nm), which is in contrast to their counterparts (fractions of 0.22, 0.25, and 0.20 for Au, Pt, and Pd on the SiO₂ support). The excellent performances of metal clusters encapsulated within ZIF‐8 crystals give new opportunities for catalytic reactions.     

Silica‐Protection‐Assisted Encapsulation of Cu2O Nanocubes into a Metal–Organic Framework (ZIF‐8) To Provide a Composite Catalyst

The integration of metal/metal oxide nanoparticles (NPs) into metal–organic frameworks (MOFs) to form composite materials has attracted great interest due to the broad range of applications. However, to date, it has not been possible to encapsulate metastable NPs with high catalytic activity into MOFs, due to their instability during the preparation process. For the first time, we have successfully developed a template protection–sacrifice (TPS) method to encapsulate metastable NPs such as Cu₂O into MOFs. SiO₂ was used as both a protective shell for Cu₂O nanocubes and a sacrificial template for forming a yolk–shell structure. The obtained Cu₂O@ZIF‐8 composite exhibits excellent cycle stability in the catalytic hydrogenation of 4‐nitrophenol with high activity. This is the first report of a Cu₂O@MOF‐type composite material. The TPS method provides an efficient strategy for encapsulating unstable active metal/metal oxide NPs into MOFs or maybe other porous materials.     

Encapsulation of Silver Nanoparticles in an Amine‐Functionalized Porphyrin Metal–Organic Framework and Its Use as a Heterogeneous Catalyst for CO2 Fixation under Atmospheric Pressure

A new porphyrin‐based compound, [Zn₃(C₄₀H₂₄N₈)(C₂₀H₈N₂O₄)₂(DEF)₂](DEF)₃ ( 1 ; DEF=N,N‐diethylformamide), has been synthesized by employing 5,10,15,20‐tetrakis(4‐pyridyl)porphyrin, 1,2‐diamino‐3,6‐bis(4‐carboxyphenyl)benzene, and Zn²⁺ salt at 100 °C under solvothermal conditions. The structure, as determined by single‐crystal XRD studies, is three‐dimensional with threefold interpenetration. The usefulness of free −NH₂ groups in the ligand was exploited for anchoring silver nanoparticles through a simple solution‐based route. The silver‐loaded sample, Ag@ 1 , was characterized by powder XRD, energy‐dispersive X‐ray spectroscopy, high‐resolution TEM, SEM, X‐ray photoelectron spectroscopy, and inductively coupled plasma MS analysis, which clearly indicated that silver nanoparticles with a size of 3.83 nm were uniformly distributed within the metal–organic framework (MOF). The Ag@ 1 sample was evaluated for possible catalytic activity for the carboxylation of a terminal alkyne by employing CO₂ under atmospheric pressure; this gave excellent results. The Ag@ 1 catalyst was found to be robust, active, and recyclable. The present studies suggest that porphyrin MOFs not only exhibit interesting structures, but also show good heterogeneous catalytic activity towards the fixation of CO₂.     

Insights into the Temperature‐Dependent “Breathing” of a Flexible Fluorinated Metal–Organic Framework

The framework expansion and contraction upon carbon dioxide uptake was studied in a partially fluorinated metal–organic framework, FMOF‐2. The results show framework expansion and contraction (breathing) as a function of pressure and temperature. Even at temperatures as low as ?30 °C, two phase transitions seem to take place with a pressure step (corresponding to the second transition) that is greatly dependent on temperature. This behavior is described by the model proposed by Coudert and co‐workers showing that the material seems to undergo two phase transitions that are temperature‐dependent. The isosteric heats of adsorption at high pressures show a minimum that is concurrent with the region of CO₂ loadings where the second pressure step occurs. It was deduced that these lower enthalpy values are a consequence of the energy cost related to the expansion or reopening of the framework. Lastly, the large and reversible breathing behavior may be a product of the combination of the high elasticity of zinc (II) coordination and the apparent high flexibility of the V‐shaped organic building block.     

The Controlled Formation and Cleavage of an Intramolecular d8–d8 Pt–Pt Interaction in a Dinuclear Cycloplatinated Molecular “Pivot‐Hinge”

The bis(diphenylphosphino)methane (dppm)‐bridged dinuclear cycloplatinated complex {[Pt(L)]₂(μ‐dppm)}²⁺ (Pt₂ ? dppm; HL: 2‐phenyl‐6‐(1H‐pyrazol‐3‐yl)‐pyridine) demonstrates interesting reversible “pivot‐hinge”‐like intramolecular motions in response to the protonation/deprotonation of L. In its protonated “closed” configuration, the two platinum(II) centers are held in position by intramolecular d⁸–d⁸ Pt–Pt interaction. In its deprotonated “open” configuration, such Pt–Pt interaction is cleaved. To further understand the mechanism behind this hingelike motion, an analogous dinuclear cycloplatinated complex, {[Pt(L)]₂(μ‐dchpm)}²⁺ (Pt₂ ? dchpm) with bis(dicyclohexylphosphino)methane (dchpm) as the bridging ligand, was synthesized. From its protonation/deprotonation responses, it was revealed that aromatic π–π interactions between the phenyl moieties of the μ‐dppm and the deprotonated pyrazolyl rings of L was essential to the reversible cleavage of the intramolecular Pt–Pt interaction in Pt₂ ? dppm. In the case of Pt₂ ? dchpm, spectroscopic and spectrofluorometric titrations as well as X‐ray crystallography indicated that the distance between the two platinum(II) centers shrank upon deprotonation, thus causing a redshift in its room‐temperature triplet metal–metal‐to‐ligand charge‐transfer emission from 614 to 625 nm. Ab initio calculations revealed the presence of intramolecular hydrogen bonding between the deprotonated and negatively charged 1‐pyrazolyl‐N moiety and the methylene CH and phenyl C–H of the μ‐dppm. The “open” configuration of the deprotonated Pt₂ ? dppm was estimated to be 19 kcal mol^?1 more stable than its alternative “closed” configuration. On the other hand, the open configuration of the deprotonated Pt₂ ? dchpm was 6 kcal mol^?1 less stable than its alternative closed configuration.     

Controlled Synthesis of Fe3O4/ZIF‐8 Nanoparticles for Magnetically Separable Nanocatalysts

Fe₃O₄/ZIF‐8 nanoparticles were synthesized through a room‐temperature reaction between 2‐methylimidazolate and zinc nitrate in the presence of Fe₃O₄ nanocrystals. The particle size, surface charge, and magnetic loading can be conveniently controlled by the dosage of Zn(NO₃)₂ and Fe₃O₄ nanocrystals. The as‐prepared particles show both good thermal stability (stable to 550 °C) and large surface area (1174 m²g^?1). The nanoparticles also have a superparamagnetic response, so that they can strongly respond to an external field during magnetic separation and disperse back into the solution after withdrawal of the magnetic field. For the Knoevenagel reaction, which is catalyzed by alkaline active sites on external surface of catalyst, small Fe₃O₄/ZIF‐8 nanoparticles show a higher catalytic activity. At the same time, the nanocatalysts can be continuously used in multiple catalytic reactions through magnetic separation, activation, and redispersion with little loss of activity.     

A Phosphorescent Molecular “Butterfly” that undergoes a Photoinduced Structural Change allowing Temperature Sensing and White Emission

A butterfly‐like phosphorescent platinum(II) binuclear complex can undergo a molecular structure change in which the Pt–Pt distance shortens upon photoexcitation, which leads to the formation of two distinct excited states and dual emission in the steady state, that is, greenish‐blue emission from the high‐energy excited state at the long Pt–Pt distance and red emission from the low‐energy excited state at the short Pt–Pt distance. This photoinduced molecular structure change has a strong dependence on the molecule’s surrounding environment, allowing its application as self‐referenced luminescent sensor for solid–liquid phase change, viscosity, and temperature, with greenish‐blue emission in solid matrix and rising red emission in molten liquid phase. With proper control of the surrounding media to manipulate the structural change and photophysical properties, a broad white emission can be achieved from this molecular butterfly.     

Chiral Metal–Organic Frameworks Bearing Free Carboxylic Acids for Organocatalyst Encapsulation

Two chiral carboxylic acid functionalized micro‐ and mesoporous metal–organic frameworks (MOFs) are constructed by the stepwise assembly of triple‐stranded heptametallic helicates with six carboxylic acid groups. The mesoporous MOF with permanent porosity functions as a host for encapsulation of an enantiopure organic amine catalyst by combining carboxylic acids and chiral amines in situ through acid–base interactions. The organocatalyst‐loaded framework is shown to be an efficient and recyclable heterogeneous catalyst for the asymmetric direct aldol reactions with significantly enhanced stereoselectivity in relative to the homogeneous organocatalyst.     

A Polyoxometalate‐Encapsulating Cationic Metal–Organic Framework as a Heterogeneous Catalyst for Desulfurization

A new cationic triazole‐based metal–organic framework encapsulating Keggin‐type polyoxometalates, with the molecular formula [Co(BBPTZ)₃][HPMo₁₂O₄₀]?24 H₂O [compound 1 ; BBPTZ=4,4′‐bis(1,2,4‐triazol‐1‐ylmethyl)biphenyl] is hydrothermally synthesized and characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. The structure of compound 1 contains a non‐interpenetrated 3D CdSO₄ (cds)‐type framework with two types of channels that are interconnected with each other; straight channels that are occupied by the Keggin‐type POM anions, and wavelike channels that contain lattice water molecules. The catalytic activity of compound 1 in the oxidative desulfurization reaction indicates that it is not only an effective and size‐selective heterogeneous catalyst, but it also exhibits distinct structural stability in the catalytic reaction system.     

Terbium–organic framework as heterogeneous Lewis acid catalyst for β‐aminoalcohol synthesis: Efficient,reusable and green catalytic method

A terbium–organic framework (Tb‐MOF) was prepared using a previously reported procedure. Tb‐MOF was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, powder X‐ray diffraction and surface area analysis. Tb‐MOF was employed as a heterogeneous Lewis acid catalyst for the synthesis of β‐aminoalcohols. Also, the effect of ultrasonic irradiation was examined in the catalytic aminolysis of styrene oxide. The reaction conditions were optimized by variation of reaction time, catalyst concentration and solvent. A variety of β‐aminoalcohols were synthesized and characterized. The Tb‐MOF catalyst showed excellent selectivity and high yield for these transformations.     

Pore‐Environment Engineering with Multiple Metal Sites in Rare‐Earth Porphyrinic Metal–Organic Frameworks

Multi‐component metal–organic frameworks (MOFs) with precisely controlled pore environments are highly desired owing to their potential applications in gas adsorption, separation, cooperative catalysis, and biomimetics. A series of multi‐component MOFs, namely PCN‐900(RE), were constructed from a combination of tetratopic porphyrinic linkers, linear linkers, and rare‐earth hexanuclear clusters (RE₆) under the guidance of thermodynamics. These MOFs exhibit high surface areas (up to 2523 cm² g^?1) and unlimited tunability by modification of metal nodes and/or linker components. Post‐synthetic exchange of linear linkers and metalation of two organic linkers were realized, allowing the incorporation of a wide range of functional moieties. Two different metal sites were sequentially placed on the linear linker and the tetratopic porphyrinic linker, respectively, giving rise to an ideal platform for heterogeneous catalysis.     

A Photoactivated Cu–CeO2 Catalyst with Cu‐[O]‐Ce Active Species Designed through MOF Crystal Engineering

Fully utilizing solar energy for catalysis requires the integration of conversion mechanisms and therefore delicate design of catalyst structures and active species. Herein, a MOF crystal engineering method was developed to controllably synthesize a copper–ceria catalyst with well‐dispersed photoactive Cu‐[O]‐Ce species. Using the preferential oxidation of CO as a model reaction, the catalyst showed remarkably efficient and stable photoactivated catalysis, which found practical application in feed gas treatment for fuel cell gas supply. The coexistence of photochemistry and thermochemistry effects contributes to the high efficiency. Our results demonstrate a catalyst design approach with atomic or molecular precision and a combinatorial photoactivation strategy for solar energy conversion.     

A Metal–Organic Framework with Cooperative Phosphines That Permit Post‐Synthetic Installation of Open Metal Sites

PCM‐101 is a phosphine coordination material comprised of tris(p‐carboxylato)triphenylphosphine and secondary pillaring groups coordinated to [M₃(OH)]⁵⁺ nodes (M=Co, Ni). PCM‐101 has a unique topology in which R₃P: sites are arranged directly trans to one another, with a P???P separation distance dictated by the pillars. Post‐synthetic coordination of soft metals to the P: sites proceeds at room temperature to provide X‐ray quality crystals that permit full structural resolution. Addition of AuCl groups forces a large distortion of the parent framework. In contrast, CuBr undergoes insertion directly between the trans‐P sites to form dimers that mimic solution‐phase complexes, but that are geometrically strained due to steric pressure exerted by the MOF scaffold. The metalated materials are active in heterogeneous hydroaddition catalysis under mild conditions, yielding different major products compared to their molecular counterparts.     

3 D MOFs Containing Trigonal Bipyramidal Ln5 Clusters as Nodes: Large Magnetocaloric Effect and Slow Magnetic Relaxation Behavior

Two 3D heterometal–organic frameworks based on infrequent trigonal bipyramidal Ln₅ clusters as nodes were structurally and magnetically characterized (Ln=Gd ( 1 ), Dy ( 2 )). The results indicate large MCE of up to 30.7 J kg^?1 K^?1 in 1 and slow magnetic relaxation behavior in 2 . Expectedly, constructing 3D MOFs based on multinuclear clusters as nodes may will be a new strategy for achieving large ?ΔS_m. Additionally, compound 1 exhibits high thermal and solvent stabilities, providing a favorable foundation for realistic applications.     

Postsynthetic Metal and Ligand Exchange in MFU‐4l: A Screening Approach toward Functional Metal–Organic Frameworks Comprising Single‐Site Active Centers

The isomorphous partial substitution of Zn²⁺ ions in the secondary building unit (SBU) of MFU‐4l leads to frameworks with the general formula [M_xZn_(5–x)Cl₄(BTDD)₃], in which x≈2, M=Mn^II, Fe^II, Co^II, Ni^II, or Cu^II, and BTDD=bis(1,2,3‐triazolato‐[4,5‐b],[4′,5′‐i])dibenzo‐[1,4]‐dioxin. Subsequent exchange of chloride ligands by nitrite, nitrate, triflate, azide, isocyanate, formate, acetate, or fluoride leads to a variety of MFU‐4l derivatives, which have been characterized by using XRPD, EDX, IR, UV/Vis‐NIR, TGA, and gas sorption measurements. Several MFU‐4l derivatives show high catalytic activity in a liquid‐phase oxidation of ethylbenzene to acetophenone with air under mild conditions, among which Co‐ and Cu derivatives with chloride side‐ligands are the most active catalysts. Upon thermal treatment, several side‐ligands can be transformed selectively into reactive intermediates without destroying the framework. Thus, at 300 °C, Co^II‐azide units in the SBU of Co‐MFU‐4l are converted into Co^II‐isocyanate under continuous CO gas flow, involving the formation of a nitrene intermediate. The reaction of Cu^II‐fluoride units with H₂ at 240 °C leads to Cu^I and proceeds through the heterolytic cleavage of the H₂ molecule.