Efficient Palladium‐Assisted One‐Pot Deprotection of (Acetamidomethyl)Cysteine Following Native Chemical Ligation and/or Desulfurization To Expedite Chemical Protein Synthesis

The acetamidomethyl (Acm) moiety is a widely used cysteine protecting group for the chemical synthesis and semisynthesis of peptide and proteins. However, its removal is not straightforward and requires harsh reaction conditions and additional purification steps before and after the removal step, which extends the synthetic process and reduces the overall yield. To overcome these shortcomings, a method for rapid and efficient Acm removal using Pd^II complexes in aqueous medium is reported. We show, for the first time, the assembly of three peptide fragments in a one‐pot fashion by native chemical ligation where the Acm moiety was used to protect the N‐terminal Cys of the middle fragment. Importantly, an efficient synthesis of the ubiquitin‐like protein UBL‐5, which contains two native Cys residues, was accomplished through the one‐pot operation of three key steps, namely ligation, desulfurization, and Acm deprotection, highlighting the great utility of the new approach in protein synthesis.     

Cysteine/Penicillamine Ligation Independent of Terminal Steric Demands for Chemical Protein Synthesis

The chemical ligation of two unprotected peptides to generate a natural peptidic linkage specifically at the C‐ and N‐termini is a desirable goal in chemical protein synthesis but is challenging because it demands high reactivity and selectivity (chemo‐, regio‐, and stereoselectivity). We report an operationally simple and highly effective chemical peptide ligation involving the ligation of peptides with C‐terminal salicylaldehyde esters to peptides with N‐terminal cysteine/penicillamine. The notable features of this method include its tolerance of steric hinderance from the side groups on either ligating terminus, thereby allowing flexible disconnection at sites that are otherwise difficult to functionalize. In addition, this method can be expanded to selective desulfurization and one‐pot ligation‐desulfurization reactions. The effectiveness of this method was demonstrated by the synthesis of VISTA (216‐311), PD‐1 (192‐288) and Eglin C.     

Efficient Chemical Protein Synthesis using Fmoc-Masked N-Terminal Cysteine in Peptide Thioester Segments

We report an operationally simple method to facilitate chemical protein synthesis by fully convergent and one-pot native chemical ligations utilizing the fluorenylmethyloxycarbonyl (Fmoc) moiety as an N-masking group of the N-terminal cysteine of the middle peptide thioester segment(s). The Fmoc group is stable to the harsh oxidative conditions frequently used to generate peptide thioesters from peptide hydrazide or o-aminoanilide. The ready availability of Fmoc-Cys(Trt)-OH, which is routinely used in Fmoc solid-phase peptide synthesis, where the Fmoc group is pre-installed on cysteine residue, minimizes additional steps required for the temporary protection of the N-terminal cysteinyl peptides. The Fmoc group is readily removed after ligation by short exposure (<7 min) to 20 % piperidine at pH 11 in aqueous conditions at room temperature. Subsequent native chemical ligation reactions can be performed in presence of piperidine in the same solution at pH 7.     

An Efficient One‐Pot Four‐Segment Condensation Method for Protein Chemical Synthesis

Successive peptide ligation using a one‐pot method can improve the efficiency of protein chemical synthesis. Although one‐pot three‐segment ligation has enjoyed widespread application, a robust method for one‐pot four‐segment ligation had to date remained undeveloped. Herein we report a new one‐pot multisegment peptide ligation method that can be used to condense up to four segments with operational simplicity and high efficiency. Its practicality is demonstrated by the one‐pot four‐segment synthesis of a plant protein, crambin, and a human chemokine, hCCL21.     

Native Chemical Ligation to Minimize Aspartimide Formation during Chemical Synthesis of Small LDLa Protein

The inhibition of the G protein‐coupled receptor, relaxin family peptide receptor 1 (RXFP1), by a small LDLa protein may be a potential approach for prostate cancer treatment. However, it is a significant challenge to chemically produce the 41‐residue and three‐disulfide cross‐bridged LDLa module which is highly prone to aspartimide formation due to the presence of several aspartic acid residues. Known palliative measures, including addition of HOBt to piperidine for N^α‐deprotection, failed to completely overcome this side reaction. For this reason, an elegant native chemical ligation approach was employed in which two segments were assembled for generating the linear LDLa protein. Acquisition of correct folding was achieved by using either a regioselective disulfide bond formation or global oxidation strategies. The final synthetic LDLa protein obtained was characterized by NMR spectroscopic structural analysis after chelation with a Ca²⁺ ion and confirmed to be equivalent to the same protein obtained by recombinant DNA production.     

Efficient Chemical Protein Synthesis using Fmoc‐Masked N‐Terminal Cysteine in Peptide Thioester Segments

We report an operationally simple method to facilitate chemical protein synthesis by fully convergent and one‐pot native chemical ligations utilizing the fluorenylmethyloxycarbonyl (Fmoc) moiety as an N‐masking group of the N‐terminal cysteine of the middle peptide thioester segment(s). The Fmoc group is stable to the harsh oxidative conditions frequently used to generate peptide thioesters from peptide hydrazide or o‐aminoanilide. The ready availability of Fmoc‐Cys(Trt)‐OH, which is routinely used in Fmoc solid‐phase peptide synthesis, where the Fmoc group is pre‐installed on cysteine residue, minimizes additional steps required for the temporary protection of the N‐terminal cysteinyl peptides. The Fmoc group is readily removed after ligation by short exposure (<7 min) to 20 % piperidine at pH 11 in aqueous conditions at room temperature. Subsequent native chemical ligation reactions can be performed in presence of piperidine in the same solution at pH 7.     

Leveraging the Knorr Pyrazole Synthesis for the Facile Generation of Thioester Surrogates for use in Native Chemical Ligation

Facile synthesis of C‐terminal thioesters is integral to native chemical ligation (NCL) strategies for chemical protein synthesis. We introduce a new method of mild peptide activation, which leverages solid‐phase peptide synthesis (SPPS) on an established resin linker and classical heterocyclic chemistry to convert C‐terminal peptide hydrazides into their corresponding thioesters via an acyl pyrazole intermediate. Peptide hydrazides, synthesized on established trityl chloride resins, can be activated in solution with stoichiometric acetyl acetone (acac), readily proceed to the peptide acyl pyrazoles. Acyl pyrazoles are mild acylating agents and are efficiently exchanged with an aryl thiol, which can then be directly utilized in NCL. The mild, chemoselective, and stoichiometric activating conditions allow this method to be utilized through multiple sequential ligations without intermediate purification steps.     

Controlling Peptide Self‐Assembly through a Native Chemical Ligation/Desulfurization Strategy

Self‐assembled peptides were synthesized by using a native chemical ligation (NCL)/desulfurization strategy that maintained the chemical diversity of the self‐assembled peptides. Herein, we employed oxo‐ester‐mediated NCL reactions to incorporate cysteine, a cysteine‐based dipeptide, and a sterically hindered unnatural amino acid (penicillamine) into peptides. Self‐assembly of the peptides resulted in the formation of self‐supporting gels. Microscopy analysis indicated the formation of helical nanofibers, which were responsible for the formation of gel matrices. The self‐assembly of the ligated peptides was governed by covalent and non‐covalent interactions, as confirmed by FTIR, CD, fluorescence spectroscopy, and MS (ESI) analyses. Peptide disassembly was induced by desulfurization reactions with tris(2‐carboxyethyl)phosphine (TCEP) and glutathione at 80 °C. Desulfurization reactions of the ligated peptides converted the Cys and penicillamine functionalities into Ala and Val moieties, respectively. The self‐supporting gels showed significant shear‐thinning and thixotropic properties.     

Semisynthesis of a Post‐Translationally Modified Protein by Using Chemical Cleavage and Activation of an Expressed Fusion Polypeptide

Herein, we describe a new semisynthetic strategy of a post‐translationally modified protein in which the middle region is glycosylated. We designed a single‐plasmid coding for a fusion polypeptide, which can provide both an N‐terminal α‐thioester and a C‐terminal cysteine peptide of a target glycoprotein by using chemical‐cleavage and activation methods. The use of these resultant peptide derivatives resulted in the successful synthesis of N‐glycosylated‐interleukin 13.     

Total Chemical Synthesis and Biological Activities of Glycosylated and Non‐Glycosylated Forms of the Chemokines CCL1 and Ser‐CCL1

CCL1 is a naturally glycosylated chemokine protein that is secreted by activated T‐cells and acts as a chemoattractant for monocytes. 1 Originally, CCL1 was identified as a 73 amino acid protein having one N‐glycosylation site, 1 and a variant 74 residue non‐glycosylated form, Ser‐CCL1, has also been described. 2 There are no systematic studies of the effect of glycosylation on the biological activities of either CCL1 or Ser‐CCL1. Here we report the total chemical syntheses of both N‐glycosylated and non‐glycosylated forms of (Ser‐)CCL1, by convergent native chemical ligation. We used an N‐glycan isolated from hen egg yolk together with the Nbz linker for Fmoc chemistry solid phase synthesis of the glycopeptide‐^αthioester building block. 3 Chemotaxis assays of these glycoproteins and the corresponding non‐glycosylated proteins were carried out. The results were correlated with the chemical structures of the (glyco)protein molecules. To the best of our knowledge, these are the first investigations of the effect of glycosylation on the chemotactic activity of the chemokine (Ser‐)CCL1 using homogeneous N‐glycosylated protein molecules of defined covalent structure.     

Imidazole‐Aided Native Chemical Ligation: Imidazole as a One‐Pot Desulfurization‐Amenable Non‐Thiol‐Type Alternative to 4‐Mercaptophenylacetic Acid

Various bioactive proteins have been synthesized by native chemical ligation (NCL) and its combination with subsequent desulfurization (e.g., conversion from Cys to Ala). In NCL, excess 4‐mercaptophenylacetic acid (MPAA) is generally added to facilitate the reaction. However, co‐elution of MPAA with the ligation product during preparative high‐performance liquid chromatography sometimes reduces its usefulness. In addition, contamination of MPAA disturbs subsequent desulfurization. Here, we report for the first time that imidazole can be adopted as an alternative to MPAA in NCL using a peptide‐alkylthioester. The efficiency of the imidazole‐aided NCL (Im‐NCL) is similar to that of traditional MPAA‐aided NCL. As model cases, we successfully synthesized adiponectin(19‐107) and [Ser(PO₃H₂)⁶⁵]‐ubiquitin using Im‐NCL with a one‐pot desulfurization.     

Peptide o‐Aminoanilides as Crypto‐Thioesters for Protein Chemical Synthesis

Fully unprotected peptide o‐aminoanilides can be efficiently activated by NaNO₂ in aqueous solution to furnish peptide thioesters for use in native chemical ligation. This finding enables the convergent synthesis of proteins from readily synthesizable peptide o‐aminoanilides as a new type of crypto‐thioesters. The practicality of this approach is shown by the synthesis of histone H2B from five peptide segments. Purification or solubilization tags, which are sometimes needed to improve the efficiency of protein chemical synthesis, can be incorporated into the o‐aminoanilide moiety, as demonstrated in the preparation of the cyclic protein lactocyclicin Q.     

Traceless Purification and Desulfurization of Tau Protein Ligation Products

We present a novel strategy for the traceless purification and synthetic modification of peptides and proteins obtained by native chemical ligation. The strategy involves immobilization of a photocleavable semisynthetic biotin–protein conjugate on streptavidin‐coated agarose beads, which eliminates the need for tedious rebuffering steps and allows the rapid removal of excess peptides and additives. On‐bead desulfurization is followed by delivery of the final tag‐free protein product. The strategy is demonstrated in the isolation of a tag‐free Alzheimer's disease related human tau protein from a complex EPL mixture as well as a triphosphorylated peptide derived from the C‐terminus of tau.     

Pedal to the Metal: The Homogeneous Catalysis of the Native Chemical Ligation Reaction

The native chemical ligation reaction of peptide thioesters with cysteinyl peptides is a pivotal chemical process in the production of native or modified peptides and proteins, and well beyond in the preparation of various biomolecule analogs and materials. To benefit from this reaction at its fullest and to access all the possible applications, the experimentalist needs to know the factors affecting its rate and how to control it. This concept article presents the fundamental principles underlying the rate of the native chemical ligation and its homogeneous catalysis by nucleophiles. It has been prepared to serve as a quick guide in the search for an appropriate catalyst.