双波长InGaN/GaN多量子阱发光二极管的光电特性

为了实现高显色指数和流明效率的白光发光二极管,在(0001)蓝宝石衬底上利用金属有机化学气相沉积系统,生长了双波长发射的InGaN/GaN多量子阱发光二极管结构.通过对不同In组分含量的双波长发射发光二极管结构的光致发光和电致发光性能进行分析,结果表明In组分含量对双波长发射发光二极管的光致发光谱的稳定性及发光效率有重...     

InGaN/GaN多量子阱的组分确定和晶格常数计算

采用金属有机化学气相沉积(MOCVD)技术以蓝宝石为衬底在n型GaN单晶层上生长了InGaN/GaN多量子阱结构外延薄膜，利用高分辨X射线衍射(HRXRD)，卢瑟福背散射/沟道(RBS/channeling)，以及光致发光(PL)技术对InGaN/GaN多量子阱结构薄膜分别进行了平均晶格常数计算、In原子替位率计算和In组分的定量分析.研究表明：InGaN/GaN多量子阱的水平和垂直方向平均晶格常数分别为a_epi=0.3195nm，c_epi=0.5198nm，In原子的替位率为99.3%，利用HRXRD和RBS/channeling两种分析技术计算In的组分分别是0.023和0.026，并与样品生长时设定的预期目标相符合，验证了两种实验方法的准确性；而用室温条件下的光致发光谱(PL)来计算InGaN/GaN多量子阱中In的组分是与HRXRD和RBS/channeling的实验结果相差很大，说明用PL测试In组分的方法是不适宜的. 关键词： InGaN/GaN多量子阱 高分辨X射线衍射 卢瑟福背散射/沟道 光致发光     

类金字塔状GaN微米锥的形貌及发光性能

三维结构GaN基LED能够解决二维GaN基薄膜LED中存在的量子限制斯塔克效应、效率骤降、发光波长单一等问题。基于此,本文对三维类金字塔状GaN微米锥的发光性能进行了详细的研究。通过金属有机化合物化学气相沉积原位沉积SiN_x掩模层后,首先制备了底面尺寸为8μm、高度7.5μm的类金字塔状GaN微米锥,之后在其半极性面外延生长了3个周期的InGaN/GaN多量子阱。通过阴极荧光测试发现,类金字塔状GaN微米锥的半极性面上不同位置发光波长不同;变功率微区光致发光测试表明,类金字塔状GaN微米锥的半极性面在InGaN/GaN多量子阱沉积之后极化场较弱;对InGaN/GaN多量子阱进行了透射电镜表征,结合阴极荧光光谱的结果最终解释了In原子在类金字塔状GaN微米锥上的迁移机理。利用其半极性面不同位置发光波长不同的结构特点及光学特性,可以制备多波长发射LED。     

蓝光激光器结构中InGaN/GaN多量子阱界面效应的精细光致发光光谱研究

金属有机化学气相沉积(MOCVD)方法制备InGaN/GaN多量子阱结构时,在GaN势垒层生长的N2载气中引入适量H2,能够有效改善阱/垒界面质量从而提升发光效率.本工作利用光致发光(PL)光谱技术,对蓝光激光器结构中的InGaN/GaN多量子阱的发光性能进行了精细的光谱学测量与表征,研究了通H2生长对量子阱界面的调控...     

MOVPE生长的InGaN/GaN单量子阱的光致发光和光吸收特性

研究了用金属有机物气相外延(MOVPE)法在蓝宝石衬底上生长的In组分浓度保持不变的InGaN/GaN单量子阱结构在室温下的发光特性和光吸收特性.实验结果表明,在InGaN厚度<3nm时,随着样品InGaN势阱层宽度的增加(1nm),光致发光(PL)谱的发光峰值波长出现明显的红移33nm现象,而且发光强度下降8%,谱线半峰全宽(FWHM)展宽,通过对样品的透射、反射光谱研究发现,量子阱层窄(1.5nm)的样品在波长接近红外区时出现无吸收的现象,即R+T达到了100%,而在阱层较宽的样品中没有发现这一现象,对引起这些现象的原因进行了讨论.这些结果有助于开发和优化三族氮化物半导体光电器件的进一步研究工作.     

双波长InGaN/GaN多量子阱发光二极管的光电特性

为了实现高显色指数和流明效率的白光发光二极管,在（0001）蓝宝石衬底上利用金属有机化学气相沉积系统,生长了双波长发射的InGaN/GaN多量子阱发光二极管结构.通过对不同In组分含量的双波长发射发光二极管结构的光致发光和电致发光性能进行分析,结果表明In组分含量对双波长发射发光二极管的光致发光谱的稳定性及发光效率有重要影响.此外,用双蓝光发射的芯片来激发YAG:Ce荧光粉实现了高显色指数白光发射.     

GaN基激光器多量子阱垒材料的研究

在(0001)蓝宝石衬底上分别用金属有机化学气相沉积技术外延生长了InGaN/GaN, InGaN/InGaN, InGaN/AlInGaN多量子阱激光器结构, 并分别制作了脊形波导GaN基激光器。同步辐射X射线衍射,电注入受激发射光谱测试及光功率-电流(L-I)测试证明,相对于GaN垒材料,InGaN垒材料,AlInGaN四元合金垒材料更能改善多量子阱的晶体质量,提高量子阱的量子效率及降低激光器阈值电流。相关的机制为：组分调节合适的四元合金垒层中Al的掺入使得量子阱势垒高度增加,阱区收集载流子的能力增强;In的掺入能更多地补偿应力,减少了由于缺陷和位错所产生的非辐射复合中心密度;In的掺入还减小了量子阱中应力引致的压电场,电子空穴波函数空间交叠得以加强,使得辐射复合增加。     

极化效应对InGaN/GaN多量子阱结构光电特性的影响

通过求解修正的基于k·p方法的有效质量哈密顿方程并与泊松方程进行自洽,得到在极化效应影响下InGaN/GaN多量子阱的能带结构和自发辐射谱.计算结果表明,极化效应使InGaN/GaN多量子阱结构的带边由方形势变成三角形势,使导带和价带间的带隙宽度减小导致发光峰值波长红移,并使电子和空穴的分布产生空间分离从而减小发光效率...     

引入n型InGaN/GaN超晶格层提高量子阱特性研究

利用金属有机物化学气相淀积技术在蓝宝石衬底上生长了InGaN/GaN量子阱结构. 研究了引入n型InGaN薄层或InGaN/GaN超晶格层的量子阱特性,结果表明通过引入n型InGaN薄层或InGaN/GaN超晶格层缓解了量子阱有源区中的应力,改善了多量子阱表面形貌,减少了V型缺陷密度,而且提高了多量子阱的光致发光强度,从而也改进了LED的发光效率. 关键词： InGaN/GaN多量子阱 原子力显微镜 X射线双晶衍射 光致发光     

4-inch蓝宝石图形衬底上GaN基白光LED制备及表征

在4-inch蓝宝石图形衬底上,基于InGaN/GaN多量子阱结构制备了蓝光LED芯片,并通过与钇铝石榴石黄色荧光粉(YAG∶Ce~(3+))结合,封装成白光LED器件。简要介绍了外延生长和芯片工艺及封装流程,并对材料特性及器件性能进行了表征。外延片表面形貌良好,蓝光外延片荧光光谱(PL)显示峰值波长为442 nm。对封装后白光芯片进行电学特性测试,得出其开启与限流电压分别为2.7 V与3.6 V。此外,电致发光光谱(EL)含有两个主要的发光峰,分别是440 nm的蓝光峰以及540 nm的黄绿光峰,而随着注入电流的增加,蓝光峰位先蓝移后红移,黄绿光峰位先红移后蓝移再红移。本文中相关的芯片制备及表征技术将对固态照明研究起到一定的促进作用。     

Strain Effect on Photoluminescences from InGaN MQWs with Different Barriers Grown by MOCVD

InGaN/GaN MQWs, InGaN/AlGaN MQWs and InGaN/AlInGaN MQWs are grown on （0001） sapphire substrates by MOCVD. Membrane samples are fabricated by laser lift-off technology. The photoluminescence spec-ra of membranes show a blue shift of peak positions in InGaN/GaN MQWs, a red shift of peak positions in InGaN/AlGaN MQWs and no shift of peak positions in InGaN/AIlnGaN MQWs from those of samples with substrates. Different changes in Raman scattering spectra and HR-XRD （0002） profile of InGaN/AlInGaN MQWs, from those of InGaN/GaN MQWs and InGaN/AlGaN MQWs, are observed. The fact that the strain changes differently among InGaN MQWs with different barriers is confirmed. The AIlnGaN barrier could adjust the residual stress for the least strain-induced electric field in InGaN/AIlnGaN quantum wells.     

Growth and characterization of InGaN nanodots hybrid with InGaN/GaN quantum wells

Uniform InGaN nanodots were successfully grown on SiO₂ pretreated GaN surface. It was found that the InGaN nanodots were 20?nm in diameter and 5?nm in height, approximately. After the growth of two periods of InGaN/GaN quantum wells on the surface of InGaN nanodots, nanodot structure still formed in the InGaN well layer caused by the enhanced phase separation phenomenon. Dual-color emissions with different behavior were observed from photoluminescence (PL) spectrum of InGaN nanodots hybrid with InGaN/GaN quantum wells. A significant blueshift and a linewidth broadening were measured for the low-energy peak as the increase of PL excitation power, while a slight blueshift and a linewidth narrowing occurred for the high-energy peak. Accordingly, these two peaks were assigned to be from the In-rich nanodots and quantized state transition from the InGaN/GaN quantum wells with indium content, respectively.     

纳米折叠InGaN/GaN LED材料生长及器件特性

在以自组织Ni纳米岛为掩膜制作的n-GaN纳米柱上,利用MOCVD方法外延生长了具有折叠InGaN/GaN多量子阱(MQW)的LED结构外延片,进而制作了LED器件.外延片上中下游的光致荧光测试,结果表明外延片具有很好的均匀性.用该外延片制作的LED的电致发光谱,随注入电流增加没有明显蓝移,这表明纳米结构能更好地释放应力,纳米柱上外延生长的多量子阱,具有较低的压电极化电场.正向工作电流20 mA时,LED器件的工作电压为4.6 V. 关键词： 纳米柱LED 光致发光 电致发光     

Investigation of electron energy states in InGaN/GaN multiple quantum wells

Blue light emitting diodes (LED) consisting of InGaN/GaN multiple quantum wells (MQWs) have been grown by metal organic chemical vapor deposition (MOCVD) on sapphire. The width of the quantum wells (InGaN) was maintained in the range of 3–5 nm with a barrier of 10–15 nm of GaN. Various diagnostic techniques were employed for the characterization of the InGaN/GaN heterostructure. Carrier concentration depth profile from C–V measurements demonstrated the presence of MQWs. The higher value of built-in voltage (15 V) determined from C⁻²–V plot also supported the presence of MQWs as assumed to alter the space-charge region width and hence the intercept voltage. Arrhenius plots due to DLTS spectra from the device revealed at least four energy states (eV) 0.1, 0.12, 0.15 and 0.17, respectively in the quantum wells, with respect to the barrier. Further the photoluminescence spectrum showed an InGaN-based broad band centered at 2.9 eV and the GaN peak at 3.4 eV. A comparison of the PL spectrum with the literature helped to estimate the indium content in the QW (InGaN) and its width to be ∼13% and ∼3 nm, respectively. The results were consistent with the DLTS findings.     

InGaN蓝光与CdTe纳米晶基白光LED

报道了倒装焊InGaN蓝光LED与黄光CdTe纳米晶的复合结构。利用蓝光作为CdTe纳米晶的激发源,通过光的下转换机制,将部分蓝光转化为黄光,复合发射出白光。室温下正向驱动电流为10mA时,发光色品坐标为x=0.29,y=0.30。实验表明,该复合结构白光LED的一大优点在于,复合光的色品坐标几乎不随正向驱动电流大小变化,颜色稳定。     

Blue InGaN light-emitting diodes with dip-shaped quantum wells

InGaN based light-emitting diodes (LEDs) with dip-shaped quantum wells and conventional rectangular quantum wells are numerically investigated by using the APSYS simulation software. It is found that the structure with dip-shaped quantum wells shows improved light output power, lower current leakage and less efficiency droop. Based on numerical simulation and analysis, these improvements on the electrical and the optical characteristics are attributed mainly to the alleviation of the electrostatic field in dip-shaped InGaN/GaN multiple quantum wells (MQWs).     

High-efficiency InGaN/AlInGaN multiple quantum wells with lattice-matched AlInGaN superlattices barrier

A new approach to fabricating high-quality AlInGaN film as a lattice-matched barrier layer in multiple quantum wells(MQWs) is presented. The high-quality AlInGaN film is realized by growing the AlGaN/InGaN short period superlattices through metalorganic chemical vapor deposition, and then being used as a barrier in the MQWs. The crystalline quality of the MQWs with the lattice-matched AlInGaN barrier and that of the conventional InGaN/GaN MQWs are characterized by x-ray diffraction and scanning electron microscopy. The photoluminescence(PL) properties of the InGaN/AlInGa N MQWs are investigated by varying the excitation power density and temperature through comparing with those of the InGaN/GaN MQWs. The integral PL intensity of InGaN/AlInGaN MQWs is over 3 times higher than that of InGaN/GaN MQWs at room temperature under the highest excitation power. Temperature-dependent PL further demonstrates that the internal quantum efficiency of InGaN/AlInGaN MQWs(76.1%) is much higher than that of InGaN/GaN MQWs(21%).The improved luminescence performance of InGaN/AlInGaN MQWs can be attributed to the distinct reduction of the barrier-well lattice mismatch and the strain-induced non-radiative recombination centers.     

Performance Improvement of GaN-Based Violet Laser Diodes

The influences of InGaN/GaN multiple quantum wells(MQWs) and AlGaN electron-blocking layers(EBL) on the performance of GaN-based violet laser diodes are investigated. Compared with the InGaN/GaN MQWs grown at two different temperatures, the same-temperature growth of InGaN well and GaN barrier layers has a positive effect on the threshold current and slope efficiency of laser diodes, indicating that the quality of MQWs is improved. In addition, the performance of GaN laser diodes could be further improved by increasing Al content in the AlGaN EBL due to the fact that the electron leakage current could be reduced by properly increasing the barrier height of AlGaN EBL. The violet laser diode with a peak output power of 20 W is obtained.