超高效液相色谱－四极杆/静电场轨道阱高分辨质谱测定血液和肝脏中12种拟除虫菊酯类农药

建立了超高效液相色谱－四极杆/静电场轨道阱高分辨质谱（UPLC－QE－Orbitrap HRMS）测定血液和肝脏中12种拟除虫菊酯类农药的分析方法。血液和肝脏样品经乙腈沉淀蛋白后,采用Hypersil GOLD VANQUISH色谱柱（1.9 μm,2.1 mm × 100 mm）,以5 mmol/L 乙酸铵溶液（含0.1%甲酸）和甲醇作为流动相进行梯度洗脱分离,采用全扫描及自动触发二级质谱（Full MS/dd－MS2）进行检测。结果显示：12种拟除虫菊酯类农药在各自线性范围内线性良好（r2 ≥ 0.990 4）,血液和肝脏中的检出限分别为1 ~ 18 ng/mL和1 ~ 18 ng/g,定量下限分别为2 ~ 20 ng/mL和2 ~ 20 ng/g,基质效应为82.3% ~ 117%,回收率为74.1% ~ 120%,日内精密度（Intra-RSD）≤ 11%,日间精密度（Inter-RSD）≤ 12%。该方法满足公安机关办理实际案件要求,适用于血液和肝脏样本中拟除虫菊酯类农药的检验鉴定。     

电纺纳米纤维固相萃取拟除虫菊酯的研究

将电纺纳米纤维用于萃取分离拟除虫菊酯农药.实验发现电纺纳米纤维对甲氰菊酯、高效氯氟氰菊酯、溴氰菊酯、氰戊菊酯、氯菊酯和联苯菊酯农药有较好的吸附能力,对6种拟除虫菊酯农药的最大吸附容量分别为5.4、5.8、6.0、6.5、6.5和8.0μg/mg.应用电纺纳米纤维固相萃取一高败液相同时测定蔬菜样品中6种拟除虫菊酯农药.在优化实验条件下,6种拟除虫菊酯类农药分离效果较好,并在(0.01～0.04)～10mg/L浓度范围内与峰面积呈良好的线性关系(r2=0.9995～0.9999);方法的最小检测限为5～12μg/L,其加标回收率在85.8%～96.6%之间.     

土壤中多种有机氯及拟除虫菊酯类农药的GC-ECD测定

气相色谱法同时测定土壤中多种有机氯及拟除虫菊酯类农药。对土壤的分析结果：有机氯农药的检出限0．001～0、003μg／mL，拟除虫菊酯类农药检出限0.008～0．02μg／mL，线性相关系数0．9978～0．9999。用y（石油醚）：V（丙酮）=3：1超声波提取，有机氯农药回收率94．2％～124．0％，相对标准偏差为3．3％～8．8％（n=5）；拟除虫菊酯类农药回收率95．2％～118．3％，相对标准偏差为5．7％～7．1％（n=5）；方法适用于土壤样品中农药残留测定。     

气相色谱法测定果蔬中5种拟除虫菊酯类农药残留

建立快速、准确测定果蔬中5种拟除虫菊酯类农药残留量的方法。采用漩涡振荡提取农药残留,固相萃取柱净化,毛细管柱气相色谱法-μECD检测器测定。该法可同时分离检测5种拟除虫菊酯类农药残留,检出限为0.001～0.005μg/mL。拟除虫菊酯类农药残留量在0.01～1μg/mL范围内与色谱峰高线性关系良好,相关系数大于0.9998。测定结果的相对标准偏差为4.8%～10.5%(n=6),回收率为89.9%～105.0%。     

中药材中拟除虫菊酯类农药残留的微波萃取/气相色谱检测

研究了采用微波辅助萃取法从中药材中提取拟除虫菊酯类农药的影响因素。拟除虫菊酯类农药用毛细管气相色谱-电子捕获检测器检测。实验结果表明萃取中药材中拟除虫菊酯类农药残留的最佳微波萃取参数设置为:萃取温度80℃;萃取时间10 min;萃取压力808 kPa。在此微波萃取条件下,萃取回收率在80%~108%之间,相对标准偏差介于4.4%~5.8%,方法检出限(S/N=3)为0.04~0.16μg.g-1。     

磁性固相萃取结合GC－MS检测烟叶中拟除虫菊酯类农药残留

该文基于β-环糊精（β-CD）的磁性复合材料（Fe3O4@SiO2@β-CD）建立了磁固相萃取结合气相色谱－质谱法同时检测烟草中联苯菊酯、甲氰菊酯、氟氯氰菊酯和溴氰菊酯4种拟除虫菊酯类农药残留的分析方法,对比了键合不同环糊精衍生物的复合材料（Fe3O4@SiO2@α-CD、Fe3O4@SiO2@β-CD和Fe3O4@SiO2@γ-CD）对4种拟除虫菊酯类农药的吸附性能,发现Fe3O4@SiO2@β-CD对4种目标分析物具有最高的萃取率。并采用扫描电镜、红外光谱、X射线衍射仪和微孔吸附材料分析测试仪对制备的磁性材料进行表征,考察了萃取时间、解吸时间、解吸溶剂、溶液pH值和盐离子浓度等对磁性复合材料萃取性能的影响,通过萃取容量实验研究经β-CD修饰前后的磁性复合材料对萃取性能的变化。结果显示,相比于未经修饰的Fe3O4和Fe3O4@SiO2,Fe3O4@SiO2@β-CD的萃取能力显著提升,该磁性复合材料Fe3O4@SiO2@β-CD可用于烟叶样品中4种拟除虫菊酯类农药的测定,线性范围为0.1～3.0 mg/kg,相关系数为0.998 1～0.999 8,检出限均为0.03 mg/kg,定量下限均为0.1 mg/kg,3个加标水平下的回收率为65.9%～107%,相对标准偏差（RSD,n = 3）为0.70%～12%。方法可用于烟叶中联苯菊酯、甲氰菊酯、氟氯氰菊酯和溴氰菊酯4种拟除虫菊酯类农药残留的检测。     

毛细管气相色谱法测定中药材中多种拟除虫菊酯农药残留量

研究了气相色谱法测定中药材中多种拟除虫菊酯类残留量的分析方法。样品经正己烷．丙酮混合液[V（正己烷）：V（丙酮）=1：1]提取,氟罗里硅土层析柱净化,采用毛细管色谱柱分离,GC-ECD可同时测定8种拟除虫菊酯类农药残留量,回收率为76．6％～104．2％。     

快速滤过型净化结合气相色谱-串联质谱法同时检测茶叶中10种拟除虫菊酯农药残留

建立了快速滤过型净化（m-PFC）结合气相色谱-串联质谱（GC-MS/MS）测定茶叶中10种拟除虫菊酯类农药残留的方法。比较了采用不同提取溶剂（乙腈、丙酮和乙酸乙酯）和不同提取方式（不加水浸泡和加水浸泡）时10种农药的提取效率；比较了2种QuEChERS净化管和m-PFC柱对茶叶提取液的净化效果和农药残留的回收率。结果表明，茶叶样品不加水浸泡，用乙腈提取效果最好；m-PFC柱对茶叶提取液净化效果良好，而且能保证较高的农药回收率。10种拟除虫菊酯农药在相应的范围内有良好的线性关系，相关系数（R²）大于0.9980；10种农药在4个水平添加下的回收率为87.5%~111.3%，RSD为2.1%~8.9%。方法的检出限为0.001~0.015 mg/kg，定量限为0.003~0.05 mg/kg。利用该方法检测市售50例茶叶样品中10种拟除虫菊酯农药的残留，检出率为48%，但农药残留量均在国家标准限量值以下。与传统QuEChERS法和固相萃取法相比，该方法具有操作简单、准确度和精密度良好等优点，为多种拟除虫菊酯类农药在茶叶中的残留测定提供了快速检测的新方法。     

羰基铁粉掺杂整体柱萃取-在线热解吸进样气相色谱-串联质谱法分析茶叶样品中拟除虫菊酯类农药残留

制备了羰基铁粉掺杂硅胶整体柱，用于拟除虫菊酯类农药残留萃取，并与气相色谱-串联质谱（GC-MS/MS）法联用，建立了在线富集、热解吸GC-MS/MS测定茶叶样品中拟除虫菊酯类农药残留方法。研究将端羟基聚二甲基硅氧烷共价键合到SiO₂网络表面，并同时键合羰基铁粉。将目标分析物吸附并浓缩在聚二甲基硅氧烷位点上后，利用羰基铁粉的高频感应加热特性成功实现了GC-MS/MS直接气体进样并可达到快速、均匀解吸的目的。实验结果表明，在最佳条件下，本方法的富集倍数可达到约1000倍。拟除虫菊酯类农药残留的检出限为3.8~7.5 μg/kg，相对标准偏差为3.2%~6.8%（n=6）。该方法的提取回收率为97.7%~110.5%，相关系数≥0.9960。该法的吸附容量大，在电磁感应的条件下进行热脱附继而直接与GC-MS结合实现在线分析以及无溶剂洗脱。与常规固相微萃取（SPME）方法相比，该方法具有富集因子高、整体柱吸附容量大、可重复使用、自动化程度高、普适性好等优点。在样品前处理及复杂基质中农药残留的提取方面具有重要的研究意义。     

拟除虫菊酯类农药多残留直接竞争ELISA 建立及初步应用

以辣根过氧化物酶对兔抗拟除虫菊酯类农药抗体进行标记,通过优化分析条件和样品前处理方法,建立了可同时检测蔬菜中多种拟除虫菊酯类农药的直接竞争抑制ELISA方法(DC-ELISA),并在实际检测中进行了初步应用.该方法可用于同时检测蔬菜中甲氰菊酯、氯氰菊酯、三氟氯氰菊酯、溴氰菊酯4种农药的残留,检出限(I10)分别为0.25、0.30、0.43、0.81 mg·L-1,青菜样品添加含量为0.5～5.0 mg·kg-1,回收率分别为93%～114%,97%～110%,89%～126%,93%～113%.采用该方法对南京市场抽取的107个样品进行检测,并与气相色谱法进行比较,直接竞争ELISA阳性检出率为8.46%,气相色谱法阳性检出率为3.74%.     

化“材”为“筑”

Chemistry is a central, practical and creative discipline. The development of chemistry plays an important role in the progress of science and society, as well as the improvement of the quality of human life. This paper introduces the chemical knowledge of stone, concrete, glass and other inorganic nonmetallic building materials by the anthropomorphically story. Taking nanomaterials as an example, the prospect of building materials development in the future is put forward.     

"Alpha"-, "beta"- and "delta"-anhydrodigitoxigenin

The syntheses of 3β-hydroxy-5β-carda-14, 20:22-dienolide (= «β»-anhydro-), 3β-hydroxy-5β-carda-8:14, 20:22-dienolide (= «α»-anhydro-) and «δ»-anhydro-digitoxigenin (= probably 3β-hydroxy-5β, 14β-carda-8, 20:22-dienolide) by the best ways known to date, have been described. «δ»-Anhydro-digitoxigenin represents the thermodynamically most stable isomer. In this isomer the double bond in position 8 is unaffected by hydrogenation with Pt in acetic acid; with perbenzoic acid an epoxide results from which, on hydrogenation, the double bond can be regenerated in its original position. Analogous reactions are known to occur in the 8:14-epoxides.     

Making "wheels" and "cubes" from triangles

[Mn(IV)Mn(II)3] triangular units directed by the presence of tripodal alcohols self-assemble in the presence of azide and acetate ligands to form either a [Mn24] "wheel" or a [Mn32] "cube".     

"Turn-on" fluorescent sensing with "reactive" probes

Chemical probes are valuable tools for the investigation of biochemical processes, diagnosis of disease markers, detection of hazardous compounds, and other purposes. Therefore, the development of chemical probes continues to grow through various approaches with different disciplines and design strategies. Fluorescent probes have received much attention because they are sensitive and easy-to-operate, in general. To realize desired selectivity toward a given analyte, the recognition site of a fluorescent probe is designed in such a way to maximize the binding interactions, usually through weak molecular forces such as hydrogen bonding, toward the analyte over other competing ones. In addition to such a supramolecular approach, the development of fluorescent probes that sense analytes through chemical reactions has witnessed its usefulness for achieving high selectivity, in many cases, superior to that obtainable by the supramolecular approach. Creative incorporations of the reactive groups to latent fluorophores have provided novel chemical probes for various analytes. In this feature article, we overview the recent progress in the development of turn-on fluorescent probes that are operating through chemical reactions triggered by target analytes. Various chemical reactions have been implemented in the development of many reactive probes with very high selectivity and sensitivity toward target analytes. A major emphasis has been focused on the type of chemical reactions utilized, with the hope that further explorations can be made with new chemical reactions to develop reactive probes useful for various applications.     

"Clickable" polymersomes

Polymersomes, composed of amphiphilic polystyrene-block-poly(acrylic acid) (PS-b-PAA), with the periphery being covered with azide groups, were used for further functionalization using "click" chemistry.