氧化铝载体对Pt-Sn/Al2O3催化剂上苯胺和苯甲醇一步合成N-苯基苄胺催化反应性能的影响

以基于借氢策略的苯甲醇和苯胺一步合成N-苯基苄胺为模型反应,研究了三种不同表面结构的氧化铝对其负载的Pt-Sn催化剂上N-烷基化合成仲胺反应性能的影响.采用N₂吸附-脱附法、压汞法、X射线衍射、透射电镜、扫描电镜、CO脉冲吸附、H₂-程序升温还原及NH₃-程序升温脱附等技术对载体和Pt-Sn/Al₂O₃催化剂进行了表征.结果表明,与Al₂O₃相互作用较弱且高度分散的Pt颗粒具有很高的催化活性,Al₂O₃载体较大的孔体积和大孔分布的孔结构有助于反应物扩散和吸附到催化剂表面并提高反应活性.同时也有利于反应产物从催化剂表面离开,从而提高催化剂的稳定性.然而Al₂O₃较强的酸性及酸性分布降低了产物仲胺的选择性和催化剂稳定性.     

High catalytic performance of the first electrospun nano-biohybrid,Mn3O4/copper complex/polyvinyl alcohol,from Amaranthus spinosus plant for biomimetic oxidation reactions

In this study, a novel nano-biocomposite, polyvinylalcohol/Mn₃O₄/water-soluble copper complex (PVA/Mn₃O₄/CuWSC), was produced from Amaranthus spinosus. By combining water-soluble copper nanocomplex and Mn₃O₄ nanoparticles along with polyvinyl alcohols and extracts of this plant, this bio nanomaterial was prepared via electrospinning process. This nanohybrid was characterized using transmission electron microscopy, scanning electron microscopy, atomic force microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, and elemental analysis. Based on its catalytic activities, it is considered a heterogeneous catalyst and is used for the oxidation of alcohols in industrial reactions. It can oxidize the primary and secondary alcohols to corresponding aldehyde and ketone products with high yield and excellent selectivity using H₂O₂ under solvent-free conditions. The recyclability and reusability of PVA/Mn₃O₄/CuWSC show that it can be a promising catalyst for clean industrial catalytic applications.     

M/Al2O3-CeO2（M=Pt-Ru，Ru，Pt）催化剂在甲胺催化湿式氧化中的活性与选择性

采用浸渍法制备了M/Al₂O₃-CeO₂（M=Pt-Ru,Ru,Pt）催化剂,并将其用于甲胺的催化湿式氧化反应（CWAO）.结果表明,Pt-Ru/Al₂O₃-CeO₂具有最佳活性和选择性.运用程序升温还原、X射线光电子能谱、X射线衍射、透射电子显微镜、N₂吸附和CO化学吸附等技术对催化剂的物化性质进行了表征.Pt组分的引入可有效提高双金属催化剂活性组分的分散度,从而明显提高了其催化性能.升降温过程中总有机碳（TOC）转化率与N₂选择性迟滞效应表明,甲胺CWAO遵循化学吸附-脱附机理.     

Synthesis and catalytic activity of novel Ni-N complexes

A series of nickel complexes with 1,3-xylylenediamine, 1,2-diaminobenzene and 1,2-aminobenzylamine were first synthesized and characterized. The reaction of these amines with Ni(OAc)₂ · 4H₂O and NiCl₂ · 6H₂O in methanol or tetrahydrofuran resulted in the production of four novel nickel complexes I, II, III, and IV. The structure of each complex was determined by X-ray diffraction analysis. Each complex was also characterized using elemental analysis, ¹H NMR and IR. The complexes were then used to catalyze the Henry reaction, and good catalytic results (65?C99%) were achieved. The catalytic activity of the complexes was determined by ¹H NMR.     

Cr掺杂的丙烷选择氧化制丙烯酸高效催化剂

在丙烷选择氧化制丙烯酸催化剂MoVTeNbOx的活性相M1基础上掺杂一定量的Cr,当Cr/Nb摩尔比为0.002时,催化剂具有很高的丙烯酸选择性(78.3%)和收率(50.7%);并采用X射线衍射、X射线光电子能谱、程序升温还原、O2程序升温脱附、NH3程序升温脱附和异丙醇氧化等手段对催化剂的构效关系进行了探讨.结果表明,适量Cr的添加可调节催化剂表面Mo6+,V5+和Te4+等物种含量,提高催化剂的氧化能力,使丙烷转化率增加.同时,适量Cr的添加使得催化剂表面酸强度下降,酸性位点数量减少,从而抑制丙烯酸的深度氧化,提高了丙烯酸选择性.     

Transfer hydrogenation of ketones catalyzed by 2,6‐bis(triazinyl)pyridine ruthenium complexes: The influence of alkyl arms

The transfer hydrogenation of ketones catalyzed by transition metal complexes has attracted much attention. A series of ruthenium(II) complexes bearing 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridine ligands (R-BTPs) were synthesized and characterized by NMR analysis and X-ray diffraction. These ruthenium(II) complexes were applied in the transfer hydrogenation of ketones. Their different catalytic activity were attributed to the alkyl arms on the 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridine. As the length of the alkyl arms rising, the catalytic activities of the complex catalysts decreased. By means of 0.4 mol % catalyst RuCl₂(PPh₃)(3-methylbutyl-BTP) in refluxing 2-propanol, a variety of ketones were reduced to their corresponding alcohols with >95% conversion over a period of 3 h. © 2019 Elsevier Science. All rights reserved.     

Preparation of Pt@Fe2O3 nanowires and their catalysis of selective oxidation of olefins and alcohols

Iron oxide coated platinum nanowires (Pt@Fe(2)O(3)NWs) with a diameter of 2.8 nm have been prepared by the oxygen oxidation of FePt NWs in oleylamine. These "cable"-like NWs were characterised by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and X-ray absorption fine structure analysis. These Pt@Fe(2)O(3) NWs were used as "non-support" heterogeneous catalysts in oxidation of olefins and alcohols. The results revealed that it is an active and highly selective catalyst. Styrene derivatives were tested with molecular oxygen as the sole oxidant, with benzaldehyde successfully obtained from styrene in an absolute yield of 31%, whereas the use of tert-butyl hydroperoxide as the sole oxidant in the oxidation of alcohols led to yields of more than 80% of the corresponding ketone or aldehyde. This unsupported catalyst was found to be more active (TOF=96.5 h(-1)) than other reported Fe(2)O(3) nanoparticle catalysts and could be recycled multiple times without any notable decrease in activity. Our findings will extend the use of such nanomaterial catalysts to new catalytic systems.     

Efficient aerial oxidation of different types of alcohols using ZnO nanoparticle–MnCO3-graphene oxide composites

Graphene–metal nanocomposites have been found to remarkably enhance the catalytic performance of metal nanoparticle-based catalysts. In continuation of our previous report, in which highly reduced graphene oxide (HRG)-based nanocomposites were synthesized and evaluated, we present nanocomposites of graphene oxide (GRO) and ZnO nanoparticle-doped MnCO₃ ([ZnO–MnCO₃/(1%)GRO]) synthesized via a facile, straightforward co-precipitation technique. Interestingly, it was noticed that the incorporation of GRO in the catalytic system could noticeably improve the catalytic efficiency compared to a catalyst (ZnO–MnCO₃) without GRO, for aerial oxidation of benzyl alcohol (BzOH) employing O₂ as a nature-friendly oxidant under base-free conditions. The impacts of various reaction factors were thoroughly explored to optimize reaction conditions using oxidation of BzOH to benzaldehyde (BzH) as a model substrate. The catalysts were characterized using X-ray diffraction, thermogravimetric analysis, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, Energy dispersive X-ray spectroscopy (EDX), Brunauer-Emmett-Teller (BET), and Raman spectroscopy. The (1%)ZnO–MnCO₃/(1%)GRO exhibited significant specific activity (67 mmol.g⁻¹.hr⁻¹) with full convversion of BzOH and >99% BzH selectivity within just 6 min. The catalytic efficiency of the (1%)ZnO–MnCO₃/(1%)GRO nanocomposite was significantly better than the (1%)ZnO–MnCO₃/(1%)HRG and (1%)ZnO–MnCO₃ catalysts, presumably due to the existence of oxygen-possessing groups on the GRO surface and as well as a very high surface area that could have been instrumental in uniformly dispersing the active sites of the catalyst, i.e., ZnO–MnCO₃. Under optimum circumstances, various kinds of alcohols were selectively transformed to respective carbonyls with full convertibility over the (1%)ZnO–MnCO₃/(1%)GRO catalyst. Furthermore, the highly effective (1%)ZnO–MnCO₃/(1%)GRO catalyst could be successfully reused and recycled over five consecutive runs with a marginal reduction in its performance and selectivity.     

Catalytic conversion of aliphatic alcohols on carbon nanomaterials: The roles of structure and surface functional groups

Carbon nanomaterials with the structure of graphene and different compositions of the surface groups are used as catalysts for the conversion of С₂–С₄ aliphatic alcohols. The conversions of ethanol, propanol- 1, propanol-2, butanol-1, butanol-2, and tert-butanol on carbon nanotubes, nanoflakes, and nanoflakes doped with nitrogen are investigated. Oxidized and nonoxidized multiwalled carbon nanotubes, nanoflakes, and nanoflakes doped with nitrogen are synthesized. X-ray diffraction analysis, X-ray photoelectron spectroscopy, scanning and transmission electronic microscopies, Brunauer–Emmett–Teller method, derivatographic analyses, and the pulsed microcatalytic method are used to characterize comprehensively the prepared catalysts. It was established that all of the investigated carbon nanomaterials (with the exception of nondoped carbon nanoflakes) are bifunctional catalysts for the conversion of aliphatic alcohols, and promote dehydration reactions with the formation of olefins and dehydrogenation reactions with the formation of aldehydes or ketones. Nanoflakes doped with nitrogen are inert with respect to secondary alcohols and tert-butanol. The role of oxygen-containing and nitrogen-containing surface groups, and of the geometrical structure of the carbon matrix of graphene nanocarbon materials in the catalytic conversion of aliphatic alcohols, is revealed. Characteristics of the conversion of aliphatic alcohols that are associated with their structure are identified.     

The application of tunable tridendate P‐based ligands for the Ru(II)‐catalysed transfer hydrogenation of various ketones

Two novel versatile tridendate aminophosphine–phosphinite and phosphinite ligands were prepared and their trinuclear neutral ruthenium(II) dichloro complexes were found to be effective catalysts for the transfer hydrogenation of various ketones in excellent conversions up to 99% in the presence of 2‐propanol/NaOH in 0.1 M isopropanol solution. Particularly, [Ru₃(PPh₂OC₂H₄)₂ N–PPh₂(η⁶‐p‐cymene)₃Cl₆] acts as an excellent catalyst giving the corresponding alcohols in excellent conversion up to 99% (turnover frequency ≤ 1176 h^?1). A comparison of the catalytic properties of the complexes is also discussed briefly. Furthermore, the structures of these ligands and their corresponding complexes have also been clarified using a combination of multinuclear NMR spectroscopy, infrared spectroscopy and elemental analysis. ¹H–¹³C HETCOR or ¹H–¹H COSY correlation experiments were used to confirm the spectral assignments. Copyright © 2014 John Wiley & Sons, Ltd.     

Ce-Cu-Co/CNTs催化剂催化合成气制低碳醇及乙醇的研究

采用共浸渍法制备了不同Ce含量的Ce-Cu-Co/CNTs 催化剂, 考察了其在合成气制低碳醇反应中的催化性能, 借助X射线衍射(XRD)、程序升温还原(H₂-TPR)、N₂吸脱附实验(BET)、透射电镜(TEM)和CO程序升温脱附(CO-TPD)对这些催化剂进行了表征. 结果表明, 当Ce的质量分数为3%时, 低碳醇的时空收率和选择性达到最高, 分别为696.4 mg·g^-1·h^-1和59.7%, 其中乙醇占总醇的46.8%, 适量Ce的添加能提高Cu物种在催化剂上的分散度和催化剂的还原性能, 能显著地增加催化剂吸附CO的能力, 促进合成醇活性位的形成, 进而明显提高催化剂的活性和总醇的选择性. 研究表明, 将具有高活性和高碳链增长能力的CuCo基催化剂与碳纳米管的限域效应结合, 可实现缩窄产物分布、大幅度提高乙醇选择性的目的.     

官能化碳纳米管负载Ru催化山梨醇氢解制备低碳二元醇

以不同官能化碳纳米管(原始MCN、氨基化AMCN和石墨化GMCN等)作为载体,通过浸渍法制备了Ru/CNTs催化剂,并应用于山梨醇氢解制1,2-丙二醇和乙二醇反应中。利用XRD、HRTEM、XPS和ICP-AES等方法对催化剂进行了表征,考察了官能团性质、碱助剂等因素对山梨醇氢解性能的影响。结果表明,与Ru/MCN或Ru/GMCN相比较,Ru/AMCN催化剂对山梨醇氢解有更高的活性,在205℃、5.0 MPa氢压条件下,以Ca(OH)₂为添加剂,山梨醇的转化率可达99.5%,1,2-丙二醇(1,2-PD)和乙二醇(EG)的总产率为47.7%。催化剂重复利用五次,催化活性无明显下降。     

铯改性的沸石Y上醇类和胺类的氰乙基化反应SaraZamanian,AliNematiKharat简

Zeolite Y modified by cesium and magnesium ions was prepared by ion-exchange and impregnation methods, and its activity in the cyanoethylation of aliphatic and aromatic alcohols and amines was investigated. During the preparation of some samples, the transformation of zeolite Y into a pollucite-type phase occurred. This phase exhibited good activity in the cyanoethylation of aliphatic alcohols. The prepared solids modified by the impregnation method were more active than the ion-exchanged solids. The activities of the catalysts, in contrast to other basic solids, were scarcely affected by the presence of air or moisture. A correlation between catalyst basicity and catalytic activity is discussed. The catalysts were characterized by X-ray diffraction, volumetric nitrogen adsorption surface area measurement, and CO₂ temperature-programmed desorption. Scanning electron microscopy revealed that the particles of the modified nanocatalysts were < 40 nm. The reaction of acrylonitrile with linear alcohols in the presence of the catalysts was accelerated by microwave irradiation.     

Multi-walled carbon nanotube bound nickel Schiff-base complexes as reusable catalysts for oxidation of alcohols

Nickel salen and salophen complexes have been covalently anchored on multi-walled carbon nanotubes (MWNTs). The MWNT-supported nickel complexes have been characterized by inductive coupled plasma spectroscopy, FT-IR spectroscopy, UV-Vis spectrophotometry, transmission electron microscopy, and X-ray diffraction. The catalytic performance for the oxidation of primary and secondary alcohols was evaluated using periodic acid as oxidant. Reaction conditions have been optimized for MWNT-supported salen and salophen complexes by considering the effect of parameters such as solvent, reaction time, concentration of catalyst, amount of oxidant, etc. The catalytic activity was higher for supported catalysts than similar homogeneous ones. These supported catalysts were highly stable and reused several times without the loss of catalytic activity.     

SO42-/SnO2-Fe2O3固体酸催化下的环酮Baeyer-Villiger氧化反应及缩合反应

采用共沉淀的方法制备了不同Fe 掺杂量的SO₄^2-/SnO₂-Fe₂O₃固体超强酸催化剂. 利用傅里叶变换红外(FTIR)光谱, 粉末X射线衍射(XRD), N₂吸附-脱附实验(BET), 热重(TG)分析和扫描电镜(SEM)等方法对样品进行了表征. 考察了所得催化剂对4-叔丁基环己酮与乙二醇缩合反应的催化性能. 实验结果表明, 与未经过掺杂改性的SO₄^2-/SnO₂固体酸催化剂相比, 改性后催化剂的催化性能得到了改善. 研究了以Fe/Sn 摩尔比为0.5的SO₄^2-/SnO₂-Fe₂O₃固体酸为催化剂, 部分醛酮类化合物与乙二醇及1,2-丙二醇的缩合反应. 考察了反应时间、催化剂用量等因素对反应的影响. 同时, 将所得催化剂应用于环酮Baeyer-Villiger 氧化反应中, 催化剂表现出良好的催化活性, 且催化剂具有一定的循环使用性.     

在Ni/HZSM-5催化剂上低温水蒸汽重整生物油制氢

We investigated high catalytic activity of Ni/HZSM-5 catalysts synthesized by the impregna-tion method, which was successfully applied for low-temperature steam reforming of bio-oil. The influences of the catalyst composition, reforming temperature and the molar ratio of steam to carbon fed on the stream reforming process of bio-oil over the Ni/HZSM-5 catalysts were investigated in the reforming reactor. The promoting effects of current passing through the catalyst on the bio-oil reforming were also studied using the electrochemical catalytic re-forming approach. By comparing Ni/HZSM-5 with commonly used Ni/Al₂O₃ catalysts, the Ni₂₀/ZSM catalyst with Ni-loading content of about 20% on the HZSM-5 support showed the highest catalytic activity. Even at 450 oC, the hydrogen yield of about 90% with a near complete conversion of bio-oil was obtained using the Ni₂₀/ZSM catalyst. It was found that the performance of the bio-oil reforming was remarkably enhanced by the HZSM-5 supporter and the current through the catalyst. The features of the Ni/HZSM-5 catalysts were also investigated via X-ray diffraction, inductively coupled plasma and atomic emission spectroscopy, hydrogen temperature-programmed reduction, and Brunauer-Emmett-Teller methods.     

Oxidative dehydrogenation of ethylbenzene to styrene with CO2 over Al-MCM-41-supported vanadia catalysts

Catalytic performance of Al-MCM-41-supported vanadia catalysts (V/Al-MCM-41) with different V loading was investigated for oxidative dehydrogenation of ethylbenzene to styrene (ST) with CO₂ (CO₂-ODEB). For comparison, pure silica MCM-41 was also used as support for vanadia catalyst. The catalysts were characterized by N₂ adsorption, X-ray diffraction (XRD) pyridine-Fourier-transform infrared spectroscopy, H₂-temperature-programmed reduction, thermogravimetric analysis (TGA), UV-Raman, and diffuse reflectance (DR) UV–vis spectroscopy. The results indicate that the catalytic behavior and the nature of V species depend strongly on the V loading and the support properties. Compared with the MCM-41-supported catalyst, the Al-MCM-41-supported vanadia catalyst exhibits much higher catalytic activity and stability along with a high ST selectivity (>98%). The superior catalytic performance of the present V/Al-MCM-41 catalyst can be attributed to the Al-MCM-41 support being more favorable for the high dispersion of V species and the stabilization of active V⁵⁺ species. Together with the characterization results of XRD, TGA, and DR UV–Vis spectroscopy, the deep reduction of V⁵⁺ into V³⁺ during CO₂-ODEB is the main reason for the deactivation of the supported vanadia catalyst, while the coke deposition has a less important impact on the catalyst stability.     

制备方法对Co-MOR催化剂CH4选择还原NO性能的影响

采用离子交换法、浸渍法制备一系列的Co-MOR 催化剂, 并将其用于CH₄选择性催化还原 NO_x(CH₄-SCR)反应. 运用X 射线衍射(XRD)、X 射线荧光光谱(XRF)、扫描电子显微镜(SEM)、紫外-拉曼(UVRaman)光谱、X射线光电子能谱(XPS)、NO程序升温脱附(NO-TPD)等手段对催化剂进行了表征. 结果表明, 浸渍法制备的催化剂, Co以Co₃O₄形式存在; 而离子交换法制备的催化剂, Co以离子形式进入丝光沸石(MOR)骨架之中, 在催化剂上形成更多的Co²⁺和[Co-O-Co]²⁺, 形成更均匀NO吸附中心和CH₄-SCR反应活性中心. 催化剂活性评价表明离子交换法制备的催化剂具有更宽的活性温度区间, Co(0.30)-MOR 催化剂在327-450℃温度范围内NO转化率大于50%.     

Synthesis of MCM-41 supported amino-palladium complex and its catalytic performance for heck reaction

Using MCM-41 as the supporter, a series of MCM-41 supported amino-palladium complexes has been prepared and characterized by XRD (X-ray diffraction) and XPS (X-ray photoelectron spectroscopy), etc. The XRD and XPS results indicate that the Pd coordinates with the -NH₂ groups on the MCM-41 surface, and the structure of MCM-41 has been not damaged. Its catalytic performance for Heck arylation of alkene with aryl iodide shows that the catalysts have high activity and stereoselectivity in 70–90°C. The product of Heck reaction is in E form. And the effect of the preparation condition of catalyst on the catalytic performance was examined. Translated form Chinese Journal of Organic Chemistry, 2008, 28(5) (in Chinese)     

Mn(II) and VO(IV) Schiff base complexes encapsulated in nanocavities of zeolite-Y: catalytic activity toward oxidation of alkenes and reduction of aldehydes

Oxovanadium(IV) and manganese(II) complexes of two Schiff base ligands, bis(2,4-dihydroxyacetophenone)-1,2-propandiimine (H₂L₁) and bis(2,4-dihydroxyacetophenone)-ethylenediimine (H₂L₂) were synthesized and characterized. The encapsulation of these complexes in the nanocavities of zeolite-Y was achieved by a flexible ligand method. The prepared heterogeneous catalysts have been characterized by FTIR, NMR and atomic absorption spectroscopy, X-ray diffraction patterns, scanning electron microscopy and BET. The catalytic activities of the encapsulated complexes were studied in the oxidation of alkenes with H₂O₂ and the reduction of aldehydes with NaBH₄. In most cases, the manganese (II) complexes (MnL₁-Y, MnL₂-Y) showed better activity than the oxovanadium (IV) complexes (VOL₁-Y, VOL₂-Y) in both oxidation of alkenes and reduction of aldehydes. The catalytic activity of the recovered catalysts was compared with the fresh ones.