Chlorophyll-Based Organic Heterojunction on Ti3C2Tx MXene Nanosheets for Efficient Hydrogen Production

The Z-scheme process is a photoinduced electron-transfer pathway in natural oxygenic photosynthesis involving electron transport from photosystem II (PSII) to photosystem I (PSI). Inspired by the interesting Z-scheme process, herein a photocatalytic hydrogen evolution reaction (HER) employing chlorophyll (Chl) derivatives, Chl-1 and Chl-2, on the surface of Ti₃C₂T_x MXene with two-dimensional accordion-like morphology, forming Chl-1@Chl-2@Ti₃C₂T_x composite, is demonstrated. Due to the frontier molecular orbital energy alignments of Chl-1 and Chl-2, sublayer Chl-1 is a simulation of PSI, whereas upper layer Chl-2 is equivalent to PSII, and the resultant electron transport can take place from Chl-2 to Chl-1. Under the illumination of visible light (>420 nm), the HER performance of Chl-1@Chl-2@Ti₃C₂T_x photocatalyst was found to be as high as 143 μmol h⁻¹ g_cat⁻¹, which was substantially higher than that of photocatalysts of either Chl-1@Ti₃C₂T_x (20 μmol h⁻¹ g⁻¹) or Chl-2@Ti₃C₂T_x (15 μmol h⁻¹ g⁻¹).     

Porous TiO2 Nanotubes with Spatially Separated Platinum and CoOx Cocatalysts Produced by Atomic Layer Deposition for Photocatalytic Hydrogen Production

Efficient separation of photogenerated electrons and holes, and associated surface reactions, is a crucial aspect of efficient semiconductor photocatalytic systems employed for photocatalytic hydrogen production. A new CoO_x/TiO₂/Pt photocatalyst produced by template‐assisted atomic layer deposition is reported for photocatalytic hydrogen production on Pt and CoO_x dual cocatalysts. Pt nanoclusters acting as electron collectors and active sites for the reduction reaction are deposited on the inner surface of porous TiO₂ nanotubes, while CoO_x nanoclusters acting as hole collectors and active sites for oxidation reaction are deposited on the outer surface of porous TiO₂ nanotubes. A CoO_x/TiO₂/Pt photocatalyst, comprising ultra‐low concentrations of noble Pt (0.046 wt %) and CoO_x (0.019 wt %) deposited simultaneously with one atomic layer deposition cycle, achieves remarkably high photocatalytic efficiency (275.9 μmol h⁻¹), which is nearly five times as high as that of pristine TiO₂ nanotubes (56.5 μmol h⁻¹). The highly dispersed Pt and CoO_x nanoclusters, porous structure of TiO₂ nanotubes with large specific surface area, and the synergetic effect of the spatially separated Pt and CoO_x dual cocatalysts contribute to the excellent photocatalytic activity.     

MOF Encapsulated AuPt Bimetallic Nanoparticles for Improved Plasmonic-induced Photothermal Catalysis of CO2 Hydrogenation

Exploring new catalytic strategies for achieving efficient CO₂ hydrogenation under mild conditions is of great significance for environmental remediation. Herein, a composite photocatalyst Zr-based MOF encapsulated plasmonic AuPt alloy nanoparticles (AuPt@UiO-66-NH₂) was successfully constructed for the efficient photothermal catalysis of CO₂ hydrogenation. Under light irradiation at 150 °C, AuPt@UiO-66-NH₂ achieved a CO production rate of 1451 μmol g_metal⁻¹ h⁻¹ with 91 % selectivity, which far exceeded those obtained by Au@Pt@UiO-66-NH₂ with Pt shell on Au (599 μmol g_metal⁻¹ h⁻¹) and Au@UiO-66-NH₂ (218 μmol g_metal⁻¹ h⁻¹). The outstanding performances of AuPt@UiO-66-NH₂ were attributed to the synergetic effect originating from the plasmonic metal Au, doped active metal Pt, and encapsulation structure of UiO-66-NH₂ shell. This work provides a new way for photothermal catalysis of CO₂ and a reference for the design of high-performance plasmonic catalysts.     

Experimental Evidence of CO2 Photoreduction Activity of SnO2 Nanoparticles

Tin dioxide (SnO₂) has intrinsic characteristics that do not favor its photocatalytic activity. However, we evidenced that surface modification can positively influence its performance for CO₂ photoreduction in the gas phase. The hydroxylation of the SnO₂ surface played a role in the CO₂ affinity decreasing its reduction potential. The results showed that a certain selectivity for methane (CH₄), carbon monoxide (CO), and ethylene (C₂H₄) is related to different SnO₂ hydrothermal annealing. The best performance was seen for SnO₂ annealed at 150 °C, with a production of 20.4 μmol g⁻¹ for CH₄ and 16.45 μmol g⁻¹ for CO, while for SnO₂ at 200 °C the system produced more C₂H₄, probably due to a decrease of surface −OH groups.     

Understanding the Synergy between Fe and Mo Sites in the Nitrate Reduction Reaction on a Bio-Inspired Bimetallic MXene Electrocatalyst

Mo- and Fe-containing enzymes catalyze the reduction of nitrate and nitrite ions in nature. Inspired by this activity, we study here the nitrate reduction reaction (NO₃RR) catalyzed by an Fe-substituted two-dimensional molybdenum carbide of the MXene family, viz., Mo₂CT_x : Fe (T_x are oxo, hydroxy and fluoro surface termination groups). Mo₂CT_x : Fe contains isolated Fe sites in Mo positions of the host MXene (Mo₂CT_x) and features a Faradaic efficiency (FE) and an NH₃ yield rate of 41 % and 3.2 μmol h⁻¹ mg⁻¹, respectively, for the reduction of NO₃⁻ to NH₄⁺ in acidic media and 70 % and 12.9 μmol h⁻¹ mg⁻¹ in neutral media. Regardless of the media, Mo₂CT_x : Fe outperforms monometallic Mo₂CT_x owing to a more facile reductive defunctionalization of T_x groups, as evidenced by in situ X-ray absorption spectroscopy (Mo K-edge). After surface reduction, a T_x vacancy site binds a nitrate ion that subsequently fills the vacancy site with O* via oxygen transfer. Density function theory calculations provide further evidence that Fe sites promote the formation of surface O vacancies, which are identified as active sites and that function in NO₃RR in close analogy to the prevailing mechanism of the natural Mo-based nitrate reductase enzymes.     

Strong-Base-Assisted Synthesis of a Crystalline Covalent Triazine Framework with High Hydrophilicity via Benzylamine Monomer for Photocatalytic Water Splitting

Methods to synthesize crystalline covalent triazine frameworks (CTFs) are limited and little attention has been paid to development of hydrophilic CTFs and photocatalytic overall water splitting. A route to synthesize crystalline and hydrophilic CTF-HUST-A1 with a benzylamine-functionalized monomer is presented. The base reagent used plays an important role in the enhancement of crystallinity and hydrophilicity. CTF-HUST-A1 exhibits good crystallinity, excellent hydrophilicity, and excellent photocatalytic activity in sacrificial photocatalytic hydrogen evolution (hydrogen evolution rate up to 9200 μmol g⁻¹ h⁻¹). Photocatalytic overall water splitting is achieved by depositing dual co-catalysts in CTF-HUST-A1, with H₂ evolution and O₂ evolution rates of 25.4 μmol g⁻¹ h⁻¹ and 12.9 μmol g⁻¹ h⁻¹ in pure water without using sacrificial agent.     

Control of the directions of oxidative transformation of methane over nickel-based catalysts by acid-base properties

Two completely different directions of the oxidative transformation of methane (OTM) were performed on nickel-based catalysts due to the different acid-base properties of those catalysts. The relatively acidic LaNiO_x and LiNiLaO_x/Al₂O₃ catalysts exhibit excellent Partial Oxidation of Methane to Syngas (POM) performance. However, the relatively basic LiNiLaO_x catalyst has a good Oxidative Coupling of Methane to C₂ Hydrocarbons (OCM) activity. The basic properties of the catalyst makes it difficult to reduce nickel and keeps it in the oxidized state. Reduced nickel is necessary for POM and oxidized nickel for the OCM reaction.     

Wurtzite CuGaS2 with an In-Situ-Formed CuO Layer Photocatalyzes CO2 Conversion to Ethylene with High Selectivity

We present surface reconstruction-induced C−C coupling whereby CO₂ is converted into ethylene. The wurtzite phase of CuGaS_2. undergoes in situ surface reconstruction, leading to the formation of a thin CuO layer over the pristine catalyst, which facilitates selective conversion of CO₂ to ethylene (C₂H₄). Upon illumination, the catalyst efficiently converts CO₂ to C₂H₄ with 75.1 % selectivity (92.7 % selectivity in terms of R_electron) and a 20.6 μmol g⁻¹ h⁻¹ evolution rate. Subsequent spectroscopic and microscopic studies supported by theoretical analysis revealed operando-generated Cu²⁺, with the assistance of existing Cu⁺, functioning as an anchor for the generated *CO and thereby facilitating C−C coupling. This study demonstrates strain-induced in situ surface reconstruction leading to heterojunction formation, which finetunes the oxidation state of Cu and modulates the CO₂ reduction reaction pathway to selective formation of ethylene.     

Designed Construction of SrTiO3/SrSO4/Pt Heterojunctions with Boosted Photocatalytic H2 Evolution Activity

Efficient separation of photogenerated electron–hole pairs is a crucial factor for high-performance photocatalysts. Effective electron–hole separation and migration could be achieved by heterojunctions with suitable band structures. Herein, a porous SrTiO₃/SrSO₄ heterojunction is prepared by a sol-gel method at room temperature followed by an annealing process. XRD characterization suggests high crystallinity of the heterostructure. A well-defined interface between the two phases is confirmed by high-resolution (HR)TEM. The photocatalytic H₂ evolution productivity of the SrTiO₃/SrSO₄ heterojunction with Pt as co-catalyst reaches 396.82 μmol g⁻¹ h⁻¹, which is 16 times higher than that of SrTiO₃/Pt. The boosted photocatalytic activity of SrTiO₃/SrSO₄/Pt can be ascribed to the presence of SrSO₄, which promotes the transfer and migration of photogenerated carriers by forming the heterojunction and porous structure, which provides a large amount of active sites. This novel porous heterostructure brings new ideas for the development of high-efficiency photocatalysts for H₂ release.     

Few-Layer Fullerene Network for Photocatalytic Pure Water Splitting into H2 and H2O2

A few-layer fullerene network possesses several advantageous characteristics, including a large surface area, abundant active sites, high charge mobility, and an appropriate band gap and band edge for solar water splitting. Herein, we report for the first time that the few-layer fullerene network shows interesting photocatalytic performance in pure water splitting into H₂ and H₂O₂ in the absence of any sacrificial reagents. Under optimal conditions, the H₂ and H₂O₂ evolution rates can reach 91 and 116 μmol g⁻¹ h⁻¹, respectively, with good stability. This work demonstrates the novel application of the few-layer fullerene network in the field of energy conversion.     

Non-Interacting Ni and Fe Dual-Atom Pair Sites in N-Doped Carbon Catalysts for Efficient Concentrating Solar-Driven Photothermal CO2 Reduction

Solar-to-chemical energy conversion under weak solar irradiation is generally difficult to meet the heat demand of CO₂ reduction. Herein, a new concentrated solar-driven photothermal system coupling a dual-metal single-atom catalyst (DSAC) with adjacent Ni−N₄ and Fe−N₄ pair sites is designed for boosting gas-solid CO₂ reduction with H₂O under simulated solar irradiation, even under ambient sunlight. As expected, the (Ni, Fe)−N−C DSAC exhibits a superior photothermal catalytic performance for CO₂ reduction to CO (86.16 μmol g⁻¹ h⁻¹), CH₄ (135.35 μmol g⁻¹ h⁻¹) and CH₃OH (59.81 μmol g⁻¹ h⁻¹), which are equivalent to 1.70-fold, 1.27-fold and 1.23-fold higher than those of the Fe−N−C catalyst, respectively. Based on theoretical simulations, the Fermi level and d-band center of Fe atom is efficiently regulated in non-interacting Ni and Fe dual-atom pair sites with electronic interaction through electron orbital hybridization on (Ni, Fe)−N−C DSAC. Crucially, the distance between adjacent Ni and Fe atoms of the Ni−N−N−Fe configuration means that the additional Ni atom as a new active site contributes to the main *COOH and *HCO₃ dissociation to optimize the corresponding energy barriers in the reaction process, leading to specific dual reaction pathways (COOH and HCO₃ pathways) for solar-driven photothermal CO₂ reduction to initial CO production.     

Significant Acceleration of Photocatalytic CO2 Reduction at the Gas-Liquid Interface of Microdroplets**

Solar-driven CO₂ reduction reaction (CO₂RR) is largely constrained by the sluggish mass transfer and fast combination of photogenerated charge carriers. Herein, we find that the photocatalytic CO₂RR efficiency at the abundant gas-liquid interface provided by microdroplets is two orders of magnitude higher than that of the corresponding bulk phase reaction. Even in the absence of sacrificial agents, the production rates of HCOOH over WO₃ ⋅ 0.33H₂O mediated by microdroplets reaches 2536 μmol h⁻¹ g⁻¹ (vs. 13 μmol h⁻¹ g⁻¹ in bulk phase), which is significantly superior to the previously reported photocatalytic CO₂RR in bulk phase reaction condition. Beyond the efficient delivery of CO₂ to photocatalyst surfaces within microdroplets, we reveal that the strong electric field at the gas-liquid interface of microdroplets essentially promotes the separation of photogenerated electron-hole pairs. This study provides a deep understanding of ultrafast reaction kinetics promoted by the gas-liquid interface of microdroplets and a novel way of addressing the low efficiency of photocatalytic CO₂ reduction to fuel.     

Selective CO2-to-C2H4 Photoconversion Enabled by Oxygen-Mediated Triatomic Sites in Partially Oxidized Bimetallic Sulfide

Selective CO₂ photoreduction into C₂ fuels under mild conditions suffers from low product yield and poor selectivity owing to the kinetic challenge of C−C coupling. Here, triatomic sites are introduced into bimetallic sulfide to promote C−C coupling for selectively forming C₂ products. As an example, FeCoS₂ atomic layers with different oxidation degrees are first synthesized, demonstrated by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Both experiment and theoretical calculation verify more charges aggregate around the introduced oxygen atom, which enables the original Co−Fe dual sites to turn into Co−O−Fe triatomic sites, thus promoting C−C coupling of double *COOH intermediates. Accordingly, the mildly oxidized FeCoS₂ atomic layers exhibit C₂H₄ formation rate of 20.1 μmol g⁻¹ h⁻¹, with the product selectivity and electron selectivity of 82.9 % and 96.7 %, outperforming most previously reported photocatalysts under similar conditions.     

A Fully Conjugated Covalent Organic Framework with Oxidative and Reductive Sites for Photocatalytic Carbon Dioxide Reduction with Water

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO₂) reduction half-reaction and the water (H₂O) oxidation half-reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF-bpy-Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust −C=C− bond linkages. The charge-separation ability of viCOF-bpy-Re is promoted by low polarized π-bridges between rhenium complexes and triazine ring units, and the efficient charge-separation enables the photogenerated electron–hole pairs, followed by an intramolecular charge-transfer process, to form photogenerated electrons involved in CO₂ reduction and photogenerated holes that participate in H₂O oxidation simultaneously. The viCOF-bpy-Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 μmol g⁻¹ h⁻¹ with about 100 % selectivity) and oxygen (O₂) evolution (90.2 μmol g⁻¹ h⁻¹) among all the porous catalysts in CO₂ reduction with H₂O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure–function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations.     

Hydrocarbon production by addition of Cu-ZnO on g-C3N4 for CO2 conversion

In this study, copper/zinc oxide/graphite nitrogen carbide (Cu/ZnO/g-C₃N₄) is prepared using a hydrothermal method and applied as a photocatalyst for CO₂ photoreduction. The morphology and structural properties of the obtained Cu/ZnO/g-C₃N₄ are systematically characterized through X-ray powder diffraction, ultraviolet–visible absorption spectroscopy, transmission electronic microscopy, and photoluminescence spectroscopy. A 3 wt% Cu/ZnO/g-C₃N₄ photocatalyst exhibits high CH₄ (40.7 μmol g⁻¹ hr⁻¹), CO (65.1 μmol g⁻¹ hr⁻¹), and CH₃OH (92.5 μmol g⁻¹ hr⁻¹) production rates, which are 38.3, 77.1, and 58.1 fold higher than the pure g-C₃N₄. The production rate is higher than those for bulk g-C₃N₄ and ZnO/g-C₃N₄. Finally, the reaction mechanism of Cu/ZnO/C₃N₄ is proposed in this study.     

Direct Observation of Dynamic Bond Evolution in Single-Atom Pt/C3N4 Catalysts

Single-atom catalysts are promising platforms for heterogeneous catalysis, especially for clean energy conversion, storage, and utilization. Although great efforts have been made to examine the bonding and oxidation state of single-atom catalysts before and/or after catalytic reactions, when information about dynamic evolution is not sufficient, the underlying mechanisms are often overlooked. Herein, we report the direct observation of the charge transfer and bond evolution of a single-atom Pt/C₃N₄ catalyst in photocatalytic water splitting by synchronous illumination X-ray photoelectron spectroscopy. Specifically, under light excitation, we observed Pt−N bond cleavage to form a Pt⁰ species and the corresponding C=N bond reconstruction; these features could not be detected on the metallic platinum-decorated C₃N₄ catalyst. As expected, H₂ production activity (14.7 mmol h⁻¹ g⁻¹) was enhanced significantly with the single-atom Pt/C₃N₄ catalyst as compared to metallic Pt-C₃N₄ (0.74 mmol h⁻¹ g⁻¹).     

Pulsed Electrocatalysis Enabling High Overall Nitrogen Fixation Performance for Atomically Dispersed Fe on TiO2

Atomically dispersed Fe was designed on TiO₂ and explored as a Janus electrocatalyst for both nitrogen oxidation reaction (NOR) and nitrogen reduction reaction (NRR) in a two-electrode system. Pulsed electrochemical catalysis (PE) was firstly involved to inhibit the competitive hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Excitingly, an unanticipated yield of 7055.81 μmol h⁻¹ g⁻¹_cat. and 12 868.33 μmol h⁻¹ g⁻¹_cat. were obtained for NOR and NRR at 3.5 V, respectively, 44.94 times and 7.8 times increase in FE than the conventional constant voltage electrocatalytic method. Experiments and density functional theory (DFT) calculations revealed that the single-atom Fe could stabilize the oxygen vacancy, lower the energy barrier for the vital rupture of N≡N, and result in enhanced N₂ fixation performance. More importantly, PE could effectively enhance the N₂ supply by reducing competitive O₂ and H₂ agglomeration, inhibit the electrocatalytic by-product formation for longstanding *OOH and *H intermediates, and promote the non-electrocatalytic process of N₂ activation.     

The Direct Partial Oxidation of Methane to Dimethyl Ether over Pt/Y2O3 Catalysts Using an NO/O2 Shuttle

Using a mixture of NO + O₂ as the oxidant enabled the direct selective oxidation of methane to dimethyl ether (DME) over Pt/Y₂O₃. The reaction was carried out in a fixed bed reactor at 0.1 MPa over a temperature range of 275–375 °C. During the activity tests, the only carbon‐containing products were DME and CO₂. The DME productivity (μmol g_cat^?1 h^?1) was comparable to oxygenate productivities reported in the literature for strong oxidants (N₂O, H₂O₂, O₃). The NO + O₂ mixture formed NO₂, which acted as the oxygen atom carrier for the ultimate oxidant O₂. During the methane partial oxidation reaction, NO and NO₂ were not reduced to N₂. In situ FTIR showed the formation of surface nitrate species, which are considered to be key intermediate species for the selective oxidation.     

Directed Electron Delivery from a Pb-Free Halide Perovskite to a Co(II) Molecular Catalyst Boosts CO2 Photoreduction Coupled with Water Oxidation

The development of high-performance photocatalytic systems for CO₂ reduction is appealing to address energy and environmental issues, while it is challenging to avoid using toxic metals and organic sacrificial reagents. We here immobilize a family of cobalt phthalocyanine catalysts on Pb-free halide perovskite Cs₂AgBiBr₆ nanosheets with delicate control on the anchors of the cobalt catalysts. Among them, the molecular hybrid photocatalyst assembled by carboxyl anchors achieves the optimal performance with an electron consumption rate of 300±13 μmol g⁻¹ h⁻¹ for visible-light-driven CO₂-to-CO conversion coupled with water oxidation to O₂, over 8 times of the unmodified Cs₂AgBiBr₆ (36±8 μmol g⁻¹ h⁻¹), also far surpassing the documented systems (<150 μmol g⁻¹ h⁻¹). Besides the improved intrinsic activity, electrochemical, computational, ex-/in situ X-ray photoelectron and X-ray absorption spectroscopic results indicate that the electrons photogenerated at the Bi atoms of Cs₂AgBiBr₆ can be directionally transferred to the cobalt catalyst via the carboxyl anchors which strongly bind to the Bi atoms, substantially facilitating the interfacial electron transfer kinetics and thereby the photocatalysis.