Plasma-Assisted Coupling Reactions of Dinitrogen and Carbon Dioxide Mediated by Monometallic YB1–4−⋅Anions: Carbon−Nitrogen Bond Formation

Transition-metal catalyzed coupling to form C−N bonds is significant in chemical science. However, the inert nature of N₂ and CO₂ renders their coupling quite challenging. Herein, we report the activation of dinitrogen in the mild plasma atmosphere by the gas-phase monometallic YB_1–4⁻ anions and further coupling of CO₂ to form C−N bonds by using mass spectrometry and theoretical calculation. The observed product anions are NCNBO⁻ and N(BO)₂⁻, accompanied by the formation of neutral products YO and YB_0–2NC, respectively. We can tune the reactivity and the type of products by manipulating the number of B atoms. The B atoms in YB_1–4N₂⁻ act as electron donors in CO₂ reduction reactions, and the carbon atom originating from CO₂ serves as an electron reservoir. This is the first example of gas-phase monometallic anions, which are capable to realize the functionalization of N₂ with CO₂ through C−N bond formation and N−N and C−O bond cleavage.     

Nitrogen–Carbon Bond Formation by Reactions of a Titanium–Potassium Dinitrogen Complex with Carbon Dioxide,tert-Butyl Isocyanate,and Phenylallene

Nitrogen–carbon bond-forming reactions at coordinated dinitrogen in a bifunctional titanium–potassium system are reported. A titanium atrane complex with a tris(aryloxide)methyl ligand ( 1 ) was treated with two equivalents of potassium naphthalenide under N₂ atmosphere to generate a bifunctional complex ( 2 ) in which N₂ binds end-on to two titanium centers and side-on to three potassium cations. Dinitrogen complex 2 reacted with carbon dioxide, tert-butyl isocyanate, and phenylallene, forming nitrogen–carbon bonds and affording diverse N-functionalized products. The reaction of 2 with CO₂ followed by addition of Me₃SiCl resulted in the formation of the starting complex 1 with concomitant release of silylated carboxyl hydrazines while the reaction with two equivalents of tert-butyl isocyanate proceeded by insertion into the Ti−N bonds. Treatment of 2 with phenylallene afforded vinyl-substituted hydrazido complexes.     

Direct Mechanism of the First Carbon–Carbon Bond Formation in the Methanol-to-Hydrocarbons Process

In the past two decades, the reaction mechanism of C−C bond formation from either methanol or dimethyl ether (DME) in the methanol-to-hydrocarbons (MTH) process has been a highly controversial issue. Described here is the first observation of a surface methyleneoxy analogue, originating from the surface-activated DME, by in situ solid-state NMR spectroscopy, a species crucial to the first C−C bond formation in the MTH process. New insights into the first C−C bond formation were provided, thus suggesting DME/methanol activation and direct C−C bond formation by an interesting synergetic mechanism, involving C−H bond breakage and C−C bond coupling during the initial methanol reaction within the chemical environment of the zeolite catalyst.     

Catalysis of Carbon–Gas Reactions

The characteristic features on the catalysis of carbon–gas reactions has been studied by combining various techniques such as transient kinetics, temperature-programmed desorption and others. Some of recent achievements are presented to comprehend the state of the art. Many industrial processes associated with catalytic carbon–gas reactions are then discussed in relation to the fundamental chemistry of catalysis.     

Substitution Reactions by Azide and Thiocyanide Anions in Room Temperature Ionic Liquids

Conducted in the ionic liquids,activated and inactivated halides,acyl chlorides,tosylate and bezotriazolyl acylates were converted to corresponding azide and thiocyanide compounds in high yields under mild conditions.     

Hypervalent-Iodine-Mediated Carbon–Carbon Bond Cleavage and Dearomatization of 9H-Fluoren-9-ols

A transition-metal-free synthesis of spiro compounds from 9H-fluoren-9-ols mediated by hypervalent iodine is reported. In this reaction, an unprecedented β-carbon elimination of tertiary alkoxyliodine(III) to form new diaryliodonium salts is proposed. The obtained phenol intermediates undergo oxidative dearomatization to furnish a class of oxo-spiro compounds. This domino reaction significantly increases the complexity of these molecules and shows excellent regio- and stereoselectivity.     

Carbon–Carbon Bond Formation by Radical Cyclization: Regioselective Synthesis of Spiro Heterocyclic Compounds by n Bu3SnH‐Mediated Reaction

Several spiro heterocyclic compounds have been regioselectively synthesized in excellent yield by ⁿ Bu₃SnH‐AIBN‐mediated radical cyclization of 4‐(2′‐bromoaryloxymethyl)‐1‐methylquinolin‐2(1H)‐ones in refluxing benzene under nitrogen for 4 h.     

Bifunctional Hydrogen Bond Donor-Catalyzed Diels–Alder Reactions: Origin of Stereoselectivity and Rate Enhancement

The selectivity and rate enhancement of bifunctional hydrogen bond donor-catalyzed Diels–Alder reactions between cyclopentadiene and acrolein were quantum chemically studied using density functional theory in combination with coupled-cluster theory. (Thio)ureas render the studied Diels–Alder cycloaddition reactions exo selective and induce a significant acceleration of this process by lowering the reaction barrier by up to 7 kcal mol⁻¹. Our activation strain and Kohn–Sham molecular orbital analyses uncover that these organocatalysts enhance the Diels–Alder reactivity by reducing the Pauli repulsion between the closed-shell filled π-orbitals of the diene and dienophile, by polarizing the π-orbitals away from the reactive center and not by making the orbital interactions between the reactants stronger. In addition, we establish that the unprecedented exo selectivity of the hydrogen bond donor-catalyzed Diels–Alder reactions is directly related to the larger degree of asynchronicity along this reaction pathway, which is manifested in a relief of destabilizing activation strain and Pauli repulsion.     

Carbon Monoxide Activation by a Molecular Aluminium Imide: C−O Bond Cleavage and C−C Bond Formation

Anionic molecular imide complexes of aluminium are accessible via a rational synthetic approach involving the reactions of organo azides with a potassium aluminyl reagent. In the case of K₂[( NON )Al(NDipp)]₂ ( NON =4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethyl-xanthene; Dipp=2,6-diisopropylphenyl) structural characterization by X-ray crystallography reveals a short Al−N distance, which is thought primarily to be due to the low coordinate nature of the nitrogen centre. The Al−N unit is highly polar, and capable of the activation of relatively inert chemical bonds, such as those found in dihydrogen and carbon monoxide. In the case of CO, uptake of two molecules of the substrate leads to C−C coupling and C≡O bond cleavage. Thermodynamically, this is driven, at least in part, by Al−O bond formation. Mechanistically, a combination of quantum chemical and experimental observations suggests that the reaction proceeds via exchange of the NR and O substituents through intermediates featuring an aluminium-bound isocyanate fragment.     

Silylene–Nickel Promoted Cleavage of B−O Bonds: From Catechol Borane to the Hydroborylene Ligand

The first 16 valence electron [bis(NHC)](silylene)Ni⁰ complex 1 , [(^TMSL)ClSi:→Ni(NHC)₂], bearing the acyclic amido-chlorosilylene (^TMSL)ClSi: (^TMSL=N(SiMe₃)Dipp; Dipp=2,6-Prⁱ₂C₆H₄) and two NHC ligands (N-heterocyclic carbene=:C[(Prⁱ)NC(Me)]₂) was synthesized in high yield and structurally characterized. Compound 1 is capable of facile dihydrogen activation under ambient conditions to give the corresponding HSi-NiH complex 2 . Most notably, 1 reacts with catechol borane to afford the unprecedented hydroborylene-coordinated (chloro)(silyl)nickel(II) complex 3 , {[cat(^TMSL)Si](Cl)Ni←:BH(NHC)₂}, via the cleavage of two B−O bonds and simultaneous formation of two Si−O bonds. The mechanism for the formation of 3 was rationalized by means of DFT calculations, which highlight the powerful synergistic effects of the Si:→Ni moiety in the breaking of incredibly strong B−O bonds.     

Selectivity Control of the Ligand Exchange at Carbon in α-Metallated Ylides as a Route to Ketenyl Anions**

α-Metallated ylides have recently been reported to undergo phosphine by CO exchange at the ylidic carbon atom to form isolable ketenyl anions. Systematic studies on the tosyl-substituted yldiides, R₃P=C(M)Ts (M=Li, Na, K), now reveal that carbonylation may lead to a competing metal salt (MTs) elimination. This side-reaction can be controlled by the choice of phosphine, metal cation, solvent and co-ligands, thus enabling the selective isolation of the ketenyl anion [Ts−CCO]M ( 2-M ). Complexation of 2-Na by crown ether or cryptand allowed structure elucidation of the first free ketenyl anion [Ts−CCO]⁻, which showed an almost linear Ts−C−C linkage indicative for a pronounced ynolate character. However, DFT studies support a high charge at the ketenyl carbon atom, which is reflected in the selective carbon-centered reactivity. Overall, the present study provides important information on the selectivity control of ketenyl anion formation which will be crucial for future applications.     

Pivotal Role of the Basic Character of Organic and Salt Catalysts in C−N Bond Forming Reactions of Amines with CO2

Organocatalysts promote a range of C−N bond forming reactions of amines with CO₂. Herein, we review these reactions and attempt to identify the unifying features of the catalysts that allows them to promote a multitude of seemingly unrelated reactions. Analysis of the literature shows that these reactions predominantly proceed by carbamate salt formation in the form [BaseH][RR′NCOO]. The anion of the carbamate salt acts as a nucleophile in hydrosilane reductions of CO₂, internal cyclization reactions or after dehydration as an electrophile in the synthesis of urea derivatives. The reactions are enhanced by polar aprotic solvents and can be either promoted or hindered by H-bonding interactions. The predominant role of all types of organic and salt catalysts (including ionic liquids, ILs) is the stabilization of the carbamate salt, mostly by acting as a base. Catalytic enhancement depends on the combination of the amine, the base strength, the solvent, steric factors, ion pairing and H-bonding. A linear relationship between the base strength and the reaction yield has been demonstrated with IL catalysts in the synthesis of formamides and quinazoline-2,4-diones. The role of organocatalysts in the reactions indicates that all bases of sufficient strength should be able to catalyze the reactions. However, a physical limit to the extent of a purely base catalyzed reaction mechanism should exist, which needs to be identified, understood and overcome by synergistic or alternative methods.     

Chemical Reactions and Kinetics of the Carbon Monoxide Coupling in the Presence of Hydrogen

The chemical reactions and kinetics of the catalytic coupling reaction of carbon monoxide to diethyl oxalate were studied in the presence of hydrogen over a supported palladium catalyst in the gaseous phase at the typical coupling reaction conditions. The experiments were performed in a continuous flow fixed-bed reactor. The results indicated that hydrogen only reacts with ethyl nitrite to form ethanol, and kinetic studies revealed that the rate-determining step is the surface reaction of adsorbed hydrogen and the ethoxy radical (EtO-). A kinetic model is proposed and a comparison of the observed and calculated conversions showed that the rate expressions are of rather high confidence.     

New Visible-Light-Triggered Photocatalytic Trifluoromethylation Reactions of Carbon–Carbon Multiple Bonds and (Hetero)Aromatic Compounds

Visible-light-photocatalyzed methods employed in synthetic transformations present attractive properties such as environmentally friendly, safety, availability and excellent functional group tolerance. In this regard, research on the visible-light photocatalytic incorporation of the trifluoromethyl CF₃ moiety into organic substrates, in particular, has contributed to a clear evolution of the field of photocatalysis. Although this particular area is constantly evolving and has been reviewed, the last five years have experienced an outburst of seminal and significant photocatalytic trifluoromethylation examples that are leading the way and opening new synthetic avenues. Recent review articles on Ru- and Ir-based photocatalytic trifluoromethylation reactions have borne witness of this evolution. Although this account will show the new Ru- and Ir-based photocatalytic trifluoromethylations, Sections 2 and 3 will also illustrate other photocatalytic systems, such as organic dyes, organic semiconductors and newly-developed all-organic photocatalysts. All the known and reviewed strategies for photocatalytic trifluoromethylation reactions of olefins and (hetero)aromatic compounds will not be discussed but will be summarized in two figures (Figures 4 and 5), and new examples (2015–present) will be presented and discussed.     

Selective Hydrolysis of Terminal Glycosidic Bond in α-1-Acid Glycoprotein Promoted by Keggin and Wells–Dawson Type Heteropolyacids

The reactivity of a range of Keggin and Wells–Dawson type heteropolyacids (HPAs): H₃PW₁₂O₄₀ H₄SiW₁₂O₄₀, H₃PMo₁₂O₄₀, K₆P₂W₁₈O₆₂, and NaH₂W₁₂O₄, towards the heavily glycosylated α-1-acid glycoprotein (AGP) is reported. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and high-performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD) show that after incubation of the protein with HPAs at 80 °C and pH 2.8 complete hydrolysis of terminal glycosidic bond has been achieved, resulting in the removal of sialic acids with no observed destruction of the protein core or the residual glycan chains. The ¹H NMR spectroscopy confirmed that the released sialic acids preserve intact structure upon their excision from the protein, which makes the reported method suitable for the analysis of sialic acid modifications which play an important role in numerous biological processes. The presence of other sugars was not detected by ¹H NMR and HPAEC-PAD, suggesting that HPAs hydrolyze only the terminal glycosidic bond in the glycoprotein, resulting in the selective release of sialic acid from AGP. The kinetic results have shown that under equal temperature and pH conditions, the hydrolysis of the terminal glucosidic bond occurred faster in the presence of HPAs compared to conventional mineral acids. The observed rate constants were in the range 6,7×10⁻² −11,9×10⁻² min⁻¹ and the complete and selective excision of sialic acids could be achieved within 60 min of incubation. The Trp fluorescence and CD spectroscopy show that non-covalent interaction between HPA and protein takes place in solution which could lead to stabilization of the sialosyl cation that is formed during the glycosidic bond hydrolysis by anionic HPA cluster.     

Synthesis and Activity of Nanodispersed SnO2–CeO2 Catalyst in the Oxidation Reactions of Carbon Monoxide and Methane

Kinetics and Catalysis - Nanodispersed SnO2–CeO2 catalysts for the oxidation of CO and СН4 were synthesized by coprecipitation in a water–isopropanol solution followed by...