Heteroleptic palladium(II) complexes containing N-heterocyclic carbenes and 4-phenyl-1H-1,2,3-triazole: Synthesis,characterization, and catalytic application

Abstract

Reaction of the dimeric N-heterocyclic carbene (NHC) palladium compounds [Pd(μ-Cl)(Cl)(NHC)]₂ with 4-phenyl-1H-1,2,3-triazole gave four mono- and dinuclear complexes 1–4. Mononuclear complexes 1 and 2 [(NHC)PdCl₂(4-phenyl-1H-1,2,3-triazole)] were obtained when the reactions were performed in CH₂Cl₂, whereas dinuclear complexes 3 and 4 [Pd₂(μ-Cl)(μ-4-phenyl-1H-1,2,3-triazole)Cl₂(NHC)₂] were obtained when the reactions were performed in THF in reflux with Et₃N as the base. Further explorations of the catalytic properties of 1–4 for Pd-catalyzed transformations have been performed and these complexes exhibited moderate to high catalytic activities for Suzuki–Miyaura coupling and arylation of benzoxazoles with aryl bromides.     

A series of (NHC)Pd(N˄O)(OAc) complexes: synthesis,characterization and catalytic activities towards desulfinative Sonogashira coupling of arylsulfonyl hydrazides with arylalkynes

A series of well-defined N-heterocyclic carbene palladium (II) complexes with general formula (NHC)Pd(N^˄O)(OAc) were prepared through reaction of Pd (NHC)(OAc)₂(H₂O) with 1-methyl-1H-pyrazole-3-carboxylic acid or 1-methyl-1H-indazole-3-carboxylic acid in the presence of K₂CO₃. These complexes were then used for desulfinative Sonogashira coupling of arylsulfonyl hydrazides with terminal alkynes. With low catalyst loading, all synthesized palladium compounds exhibited moderate to high catalytic activities for the reactions.     

Piperazine‐ and DABCO‐bridged dinuclear N‐heterocyclic carbene palladium complexes: synthesis,structure and application to Hiyama coupling reaction

Four dinuclear N ‐heterocyclic carbene (NHC) palladium complexes were prepared by reaction of imidazolinium salts, PdCl₂ and bridging ligands (piperazine and DABCO) in one pot or by direct cleavage of the chloro‐bridged dimeric compounds [Pd(μ ‐Cl)(Cl)(NHC)]₂ with bridging ligands. All of the complexes were fully characterized using ¹H NMR, ¹³C NMR, high‐resolution mass and infrared spectroscopies, elemental analysis and single‐crystal X‐ray diffraction. The catalytic activities of the obtained palladium catalysts towards Hiyama coupling of aryl chlorides with phenyltrimethoxysilane were investigated and the results showed that the dinuclear palladium complexes were considerably active for the coupling reaction. Copyright © 2016 John Wiley & Sons, Ltd.     

Mononuclear palladacycles of N,N′-diaryl-2-iminoisoindolines

Reaction of acetato-bridged dinuclear palladacycles, [Pd(iminoisoindoline)(μ-OAc)]₂, with stoichiometric amounts of PR₃ (where R = Ph or Cy) resulted in formation of the corresponding mononuclear phosphine-ligated, six-membered palladacycles with the general formula [Pd(iminoisoindoline)(OAc)PR₃]. The analogous chloride complexes were synthesized by reaction of [Pd(iminoisoindoline)(μ-OAc)]₂ with LiCl in acetone followed by addition of phosphine to afford the monomeric derivatives [Pd(iminoisoindoline)(Cl)PR₃]. Representative crystal structures of both types of mononuclear palladacycles confirmed the mononuclear nature of the complexes and showed a trans-arrangement of the phosphine ligand to the heterocyclic imine-nitrogen of the palladacycles.     

Salicylaldimine-bridged dinuclear cyclopalladated complexes: Synthesis,characterization and BSA binding studies

Salicylaldimine-bridged dinuclear cyclopalladated complexes were synthesized by the reactions of cyclopalladated chloro dimers [Pd{(4-R)C₆H₃CH=N-C₆H₃–2,6-i-Pr₂}(μ-Cl)]₂ (R = H; OMe) with salen-based bridging ligands. The complexes were characterized by FTIR, NMR spectroscopy, elemental analysis and X-ray crystallography. The binding interaction of cyclopalladated complexes to bovine serum albumin (BSA) was investigated by UV–vis, fluorescence and synchronous fluorescence spectroscopy. The experimental results showed that these Pd (II) complexes could bind to BSA with high affinity and quench its intrinsic fluorescence by a static or combined process. Also the interaction of Pd complexes with BSA affected the conformation of the tryptophan and tyrosine residues.     

Reaction of 2-dimethylaminomethylene-1,3-diones with dinucleophiles. VI. Synthesis of ethyl or methyl 1,5-disubstituted 1H-pyrazole-4-carboxylates

Reaction of ethyl or methyl 3-oxoalkanoates with N,N-dimethylformamide dimethyl acetal gave, generally in excellent yields, a series of ethyl or methyl 2-dimethylaminomethylene-3-oxoalkanoates II which reacted with phenylhydrazine to afford the esters of 5-substituted 1-phenyl-1H-pyrazole-4-carboxylic acids III in high yields. Esters III were hydrolyzed to the relative 5-substituted 1-phenyl-1H-pyrazole-4-carboxylic acids which were converted by heating to 5-substituted 1-phenyl-1H-pyrazoles in excellent yields. Reaction of II with methylhydrazine afforded in general a mixture of 3- and 5-substituted ethyl 1-methyl-1H-pyrazole-4-carboxylates with the exception of IIg , which gave in high yield methyl 5-benzyl-1-methyl-1H-pyrazole-4-carboxylate, which was hydrolyzed to the relative pyrazolecarboxylic acid. This afforded by heating 5-benzyl-1-methyl-1H-pyrazole in quantitative yield.     

Neutral and cationic orthopalladated ( ) complexes ( = phenylazophenyl, dimethylbenzylamine, 8-methylquinoline, 2-methoxy-3-N,N-dimetrylaminopropyl)

By reacting [Pd( )(μ-Cl)]₂ with AgClO₄ in NCMe, the corresponding cationic complexes [Pd( )(NCMe)₂]ClO₄ ( = phenylazophenyl-C²,N¹; dimethylbenzylamine-C²,N; 8-methylquinoline-C⁸,N) can be obtained. Solutions containing the cations [Pd( )(S)₂]⁺ are obtained when the reaction is carried out in tetrahydrofuran or acetone (S). The treatment of these solutions with bidentate ligands (L—L) (Ph₂PCH₂PPh₂,Ph₂PNHPPh₂ or Ph₂PCH₂PPh₂CHC(O)Ph) gives the mononuclear [Pd( )(L3l)]ClO₄ complexes, with L3l acting as a chelate ligand. On the other hand [Pd( (μ-Cl)]₂ reacts with L3l (Ph₂PCH₂PPh₂, Ph₂PNHPPh₂) yielding [Pd( )Cl(L3l)] with L3l acting as monodentate. The reactions between [Pd( )(NCMe)₂]ClO₄ and 2,2′-bipyrimidyl give rise to the formation of the mononuclear [Pd( ) (bipym)]ClO₄ or binuclear [Pd₂( )₂(μ-bipym)](ClO₄)₂, [( )Pd(μ-bipym)Pd( )](ClO₄)₂ derivatives. Finally [Pd( )Cldppm] (dppm = Ph₂PCH₂PPh₂) react with NaH producing the neutral complexes [Pd( )(ddppm)] (ddppm = Ph₂PCHPPh₂) which by reaction with HCl lead again to the starting materials [Pd( )Cl(dppm)].     

Nickel Tetracarbonyl as Starting Material for the Synthesis of NHC-stabilized Nickel(II) Allyl Complexes

A novel, useful in situ synthesis for NHC nickel allyl halide complexes [Ni(NHC)(η³-allyl)(X)] starting from [Ni(CO)₄], NHC and allyl halides is presented. The reaction of [Ni(CO)₄] with (i) one equivalent of the corresponding NHC and (ii) with an excess of the corresponding allyl chloride at room temperature leads with elimination of carbon monoxide to complexes of the type [Ni(NHC)(η³-allyl)(X)]. This approach was used to synthesize the complexes [Ni(tBu₂Im)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 2 ), [Ni(iPr₂Im^Me)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 3 ), [Ni(iPr₂Im)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 4 ), [Ni(iPr₂Im)(η³-H₂C -C (H)-C (Me)₂)(Br)] ( 5 ), [Ni(Me₂Im^Me)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 6 ), and [Ni(EtiPrIm^Me)(η³-H₂C -C (Me)-C H₂)(Cl)] ( 7 ). The complexes 1 to 7 were characterized using NMR and IR spectroscopy and elemental analysis, and the molecular structures are provided for 2 and 7 . The allyl nickel complexes 1 – 7 are stereochemically non-rigid in solution due to (i) NHC rotation about the nickel-carbon bond, (ii) allyl rotation about the Ni–η³-allyl axis and (iii) π–σ–π allyl isomerization processes. The allyl halide complexes can be methylated as was demonstrated by the methylation of a number of the complexes [Ni(NHC)(η³-allyl)(X)] with methylmagnesium chloride or methyllithium, which led to isolation of the complexes [Ni(Me₂Im)(η³-H₂C -C (Me)-C H₂)(Me)] ( 8 ), [Ni(tBu₂Im)(η³-H₂C -C (Me)-C H₂)(Me)] ( 9 ), [Ni(iPr₂Im^Me)(η³-H₂C -C (Me)-C H₂)(Me)] ( 10 ), [Ni(iPr₂Im)(η³-H₂C -C (Me)-C H₂)(Me)] ( 11 ), [Ni(iPr₂Im)(η³-H₂C -C (H)-C (Me)₂)(Me)] ( 12 ), and [Ni(EtiPrIm^Me)(η³-H₂C -C (Me)-C H₂)(Me)] ( 13 ). These complexes were fully characterized including X-ray molecular structures for 10 and 11 .     

Mixed ligand complexes with 2-piperidine-carboxylic acid as primary ligand and ethylene diamine, 2,2′-bipyridyl, 1,10-phenanthroline and 2(2′-pyridyl)quinoxaline as secondary ligands: preparation,characterization and biological activity

Synthesis procedures are described for the new stable mixed ligand complexes, [Pd(Hpa)(pa)]Cl, [Pd(pa)(H₂O)₂]Cl, [Pd(pa)(en)]Cl, [Pd(pa)(bpy)]Cl, [Pd(pa)(phen)Cl], [Pd(pa)(pyq)Cl], cis-[MoO₂(pa)₂], [Ag(pa)(bpy)], [Ag(pa)(pyq)], trans-[UO₂(pa)(pyq)](BPh₄) and [ReO(PPh₃)(pa)₂]Cl (Hpa = 2-piperidine-carboxylic acid, en = ethylene diamine, bpy = 2,2′-bipyridyl, phen = 1,10-phenanthroline, pyq = 2(2′-pyridyl)quinoxaline). Their elemental analyses, conductance, thermal measurements, Raman, IR, electronic, ¹H-n.m.r. and mass spectra have been measured and discussed. 2-Piperidine-carboxylic acid and its palladium complexes have been tested as growth inhibitors against Ehrlich ascites tumour cells (EAC) in Swiss albino mice.     

Hydrogenolysis of Dinuclear PCNR Ligated PdII μ-Hydroxides and Their Mononuclear PdII Hydroxide Analogues

The hydrogenolysis of mono- and dinuclear Pd^II hydroxides was investigated both experimentally and computationally. It was found that the dinuclear μ-hydroxide complexes {[(PCN^R)Pd]₂(μ-OH)}(OTf) (PCN^H=1-[3-[(di-tert-butylphosphino)methyl]phenyl]-1H-pyrazole; PCN^Me=1-[3-[(di-tert-butylphosphino)methyl]phenyl]-5-methyl-1H-pyrazole) react with H₂ to form the analogous dinuclear hydride species {[(PCN^R)Pd]₂(μ-H)}(OTf). The dinuclear μ-hydride complexes were fully characterized, and are rare examples of structurally characterized unsupported singly bridged μ-H Pd^II dimers. The {[(PCN^Me)Pd]₂(μ-OH)}(OTf) hydrogenolysis mechanism was investigated through experiments and computations. The hydrogenolysis of the mononuclear complex (PCN^H)Pd-OH resulted in a mixed ligand dinuclear species [(PCN^H)Pd](μ-H)[(PCC)Pd] (PCC=a dianionic version of PCN^H bound through phosphorus P, aryl C, and pyrazole C atoms) generated from initial ligand “rollover” C−H activation. Further exposure to H₂ yields the bisphosphine Pd⁰ complex Pd[(H)PCN^H]₂. When the ligand was protected at the pyrazole 5-position in the (PCN^Me)Pd−OH complex, no hydride formed under the same conditions; the reaction proceeded directly to the bisphosphine Pd⁰ complex Pd[(H)PCN^Me]₂. Reaction mechanisms for the hydrogenolysis of the monomeric and dimeric hydroxides are proposed.     

Monodentate phosphites with carbohydrate substituents and their application in rhodium catalysed asymmetric hydrosilylation reactions

Several monodentate phosphites derived from d-glucofuranose were prepared and examined as ligands in the rhodium catalysed enantioselective hydrosilylation of acetophenone. A substantial variation in the e.e. values, from racemic to 58% e.e., was seen depending on the nature of the phosphite ligand used and the ligand to metal ratio. The reactivity of the selected phosphite P(DAG)₃ towards [Rh(μ-Cl)(COD)]₂ and [Rh(μ-Cl)(C₂H₄)₂]₂ (DAG=(1:2;5:6)-di(O-isopropylidene)-d-glucofuranosyl) allowed the synthesis of monosubstitued Rh(Cl)(COD)P(dag)₃ and [Rh(μ-Cl)(C₂H₄)P(dag)₃]₂ complexes, and the disubstituted Rh(Cl)(P(dag)₃)₂ and Rh(Cl)(C₂H₄)(P(dag)₃)₂ complexes. This study indicated that the disubstituted compounds offer better enantioselectivities than the monosubstituted ones.     

Thiolate Bridged Gold(I)–NHC Catalysts: New Approach for Catalyst Design and its Application to Trapping Catalytic Intermediates

New dinuclear N-heterocyclic gold complexes with bridging thiolate ligands have been designed as catalytic precursors with desired properties such as stability, recyclability and that do not require additives. The dinuclear compound [(AuNHC)₂(μ-SC₆F₅)]OTf could slowly release the active catalytic species [Au(NHC)]⁺ and the precursor [Au(SC₆F₅)(NHC)] in solution, which means that both species would remain stable throughout the catalytic cycle and the pre-catalyst could easily be recovered. The properties exhibited by the complexes have been taken advantage of to gain new insights on the gold-catalyzed hydroalkoxylation of alkynes, with the aim of clarifying all the steps of the catalytic cycle, together with the characterization of intermediates and final products. Isolation and characterization of the pure final spiroketals and the thermodynamic intermediate have been achieved for the first time. Moreover, the kinetic intermediate has also been detected for the first time.     

Allylic alkylation and amination using mixed (NHC)(phosphine) palladium complexes under biphasic conditions

A dramatic improvement of the catalytic activity was observed when a phosphine was added in allylic alkylation reactions catalyzed by (NHC)Pd(η³-C₃H₅)Cl complexes. Consequently, several palladium complexes, generated in situ from different NHC-silver complexes, [Pd(η³-C₃H₅)Cl]₂ and PPh₃, were tested in this reaction to evaluate their potential. High reaction rates and conversions could be obtained with this catalytic system in the alkylation of allylic acetates with dimethylmalonate, particularly under biphasic conditions using water/dichloromethane and KOH 1 M as the base. These conditions are experimentally more convenient and gave higher reaction rates than the classical anhydrous conditions (NaH/THF). In this system, the phosphine is essential since no conversion was obtained when it is not present. The steric hindrance of the carbene ligand has a great influence on the activity and the stability of the catalytic system. The best NHC ligands for this reaction are either 1-mesityl-3-methyl-imidazol-2-ylidene or 1-(2,6-diisopropylphenyl)-3-methyl-imidazol-2-ylidene which are less bulky among the NHC tested. These two ligands led in 5 min to a complete conversion at 20 °C. The Pd-catalyzed allylic amination reaction using (E)-1,3-diphenylprop-3-en-yl acetate and benzylamine was also tested with (NHC)(PPh₃)Pd complexes and under the biphasic conditions. This reaction was found to be slower than the alkylation with dimethylmalonate but a complete conversion could be reached in 6 h at 20 °C using K₂CO₃ 1 M as the base. NMR experiments indicated that mixed (NHC)(PPh₃)Pd complexes are formed in situ but their structure could not be established exactly.     

Cadmium(II), manganese(II) and zinc(II) compounds

Three new compounds, [Cd(μ ₃ -Hpdh)(μ₂-Cl)] _n (1), Mn(Hpdh)₂(H₂O)₂ (2) and Zn(Hpdh)₂ (H₂O)₂ (3) (H₂pdh =?pyridine-2,3-dicarbo-2,3-hydrazide), have been synthesized and characterized by elemental analysis, IR spectra, TG and single-crystal X-ray diffraction. Under hydrothermal conditions, H₂pdh is generated by an in situ acylation of H₂pda (H₂pda =?pyridine-2,3-dicarboxylic acid) with hydrazine hydrate. Complex 1 features a 2D layer structure constructed by a dinuclear Cd(II) building block. In complexes 2 and 3, hydrogen bonding interactions connect mononuclear structures into 3D supramolecular frameworks.     

Tricarbonylrhenium(I) complexes of highly symmetric hexaazatrinaphthylene ligands (HATN): structural, electrochemical and spectroscopic properties

The new mononuclear and dinuclear tricarbonylrhenium(I) complexes [(HATN)Re(CO)(3)Cl] (1-Cl) and [(μ-Me(6)-HATN)[Re(CO)(3)Cl](2)] (2-Cl(2)) of highly symmetric ligands HATN and Me(6)-HATN were synthesized and structurally characterized. X-Ray crystal structures reveal identical strained aromatic systems and out of the plane fac-Re(CO)(3)Cl units for both complexes. The packing geometry in the unit cell of 1 suggests intermolecular π-π association. Infrared spectroelectrochemistry (SEC) experiments confirmed ligand-based reductions. To get more insight into the reduction mechanism the triflate salts, [(HATN)Re(CO)(3)](OTf) (1-OTf) and [(μ-Me(6)HATN){Re(CO)(3)}(2)](OTf)(2) (2-OTf(2)), were synthesized. Their electrochemical and spectroelectrochemical behavior also exhibits reduction of the aromatic systems. The electronic absorption spectral features of the one electron reduced species were studied by UV-vis-NIR spectroscopy, which shows a broad shoulder at 1500 nm, confirming intra-ligand charge transfer (ILCT). Density functional theory (DFT) calculations on the complexes 1-Cl and 2-Cl(2) for structural optimization show good agreement with experimental bond lengths and bond angles. The spin density plot shows a metal based HOMO and HATN ligand centered LUMO.     

Reactions of a 2-picolyl-bridged palladium(ii) complex with some pyrazole derivatives

A 2-picolyl-bridged dinuclear complex, [Pd(2-picolyl)Cl(PPh₃)₂] (I) reacted with alkali metal salts of poly(1-pyrazolyl)borates, Na(BPz₄) (Pz = 1-pyrazolyl), Na(HBPz₃),and K(H₂BPz₂) to afford the complexes, [Pd(2-picolyl)(BPz₄)₂] (II), [Pd(2-picolyl)(HBPz₃)(PPh₃)] (III), and [Pd(2-picolyl)(H₂BPz₂)₂] (V), respectively. Complexes II and V retained the 2-picolyl bridge, whereas III was mononuclear without the bridge. Complex I was treated with hydrated silver perchlorate in the presence of tris(1-pyrazolyl)methane to give [Pd(2-picolyl)(OH₂)(PPh₃)₂](ClO₄)₂ (VI) without incorporating the neutral ligand.     

Dinickel(II) complexes: preparation and catalytic activity

Ligands (L(a-c)) based on 2,7-bis(3,5-di-R-pyrazol-1-yl)-1,8-naphthyridine (a, R = H; b, R = CH(3); c, R = Ph) were prepared for the construction of a series of dinickel complexes. Treatment of L(x) with NiCl(2) in an anhydrous methanol/THF solution resulted in the formation of dinuclear complexes [(L(x))(μ-Cl)(2)Ni(2)Cl(2)(CH(3)OH)(2)] (3, x = a; 4, x = b; 5, x = c). These new complexes were characterized by elemental analysis, IR and UV-Vis spectroscopic techniques. The structures of complexes 3 and 4 were further confirmed by X-ray diffraction studies. Interestingly, crystals of 4 were obtained as a co-crystallization of 4 and the methanol substituted species [{(L(b))(μ-Cl)(2)Ni(2)Cl(CH(3)OH)(3)}Cl] (4'). These dinickel complexes have been tested in the catalytic homo-coupling of terminal alkynes with the use O(2) as the oxidant, showing excellent activities. A clear improvement on the catalytic activity of these complexes is observed as compared to the mono-nuclear species.     

Synthesis,characterization and anticancer activity of 3-aminopyrazine-2-carboxylic acid transition metal complexes

Synthetic procedures are described that allow access to the new complexes cis-[Mo₂O₅(apc)₂], cis-[WO₂(apc)₂], trans-[UO₂(apc)₂], [Ru(apc)₂(H₂O)₂], [Ru(PPh₃)₂(apc)₂], [Rh(apc)₃], [Rh(PPh₃)₂(apc)₂]ClO₄, [M(apc)₂], [M(PPh₃)₂(apc)]Cl, [M(bpy)(apc)]Cl (M(II) = Pd, Pt), [Pd(bpy)(apc)Cl], [Ag(apc)(H₂O)₂] and [Ir(bpy)(Hapc)₂]Cl₃, where Hapc, is 3-aminopyrazine-2-carboxylic acid. These complexes were characterized by physico-chemical and spectroscopic techniques. Both Hapc and several of its complexes display significant anticancer activity against Ehrlich ascites tumour cells (EAC) in albino mice.     

Methyl 3-cyclopropyl-3-oxopropanoate in the synthesis of heterocycles having a cyclopropyl substituent

Reactions of methyl 3-cyclopropyl-3-oxopropanoate with chloroacetone and ammonia, benzaldehyde and ammonia, and benzoquinone gave, respectively, methyl 2-cyclopropyl-5-methyl-1H-pyrrole-3-carboxylate, dimethyl 2,6-dicyclopropyl-4-phenyl-1,4-dihydropyridine-3,5-dicarboxylate, and methyl 2-cyclopropyl-5-hydroxy-1-benzofuran-3-carboxylate. Cyclization of methyl 3-cyclopropyl-3-oxopropanoate with ethyl chloro(arylhydrazono)ethanoates and other halohydrazones led to the formation of 3-substituted 1-aryl-5-cyclopropyl-1H-pyrazole-4-carboxylic acids, and 5-cyclopropyl-1-(quinolin-5-yl)-1H-1,2,3-triazole-4-carboxylic acid was obtained by reaction of the title compound with 5-azidoquinolines.     

REACTION BETWEEN [PdCl4]2- AND 5,5-DIMETHYL-2-THIOXOIMIDAZOLIDIN-4-ONE

Abstract

The reaction between 5,5-dimethyl-2-thioxoimidazolidin-4-one (H2L) and [PdCl₄]^2- has been studied in aqueous solution by potentiometric and spectrophotometric measurements. In the presence of the palladium salt, H₂L is completely monodeprotonated (HL^?); from spectrophotometric measurements, only two complexes having 1:1 and 1:2 Pd/ligand mol ratios have been identified. Potentiometric titrations, carried out on solutions with 1:1, 1:2, 1:3 and 1:4 metal/ligand mol ratios, show that these complexes must be formulated as Pd(HL)₂ and [Pd₂(HL)₂(μ-H₂O)(μ-OH)]⁺. Ionization constants of the pure ligand and formation constants of the complexes give pH distribution curves of the various species and the spectra of the two complexes. From MeOH, S-coordinated Pd(H₂L)_nCl₂ (n = 2–4) complexes have been separated in the solid state; from water, two complexes of formula Pd(H₂L)(HL)Cl and Pd(HL)Cl have been obtained with HL^? N,S-coordinated to the metal.