Binding Interaction of Captopril with Metal Ions: A Fluorescence Quenching Study

The binding interaction of captopril (CPL) with biologically active metal ions Mg²⁺, Ca²⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ was investigated in an aqueous acidic medium by fluorescence spectroscopy. The experimental results showed that the metal ions quenched the intrinsic fluorescence of CPL by forming CPL‐metal complexes. It was found that static quenching was the main reason for the fluorescence quenching. The quenching constant in the case of Cu²⁺ was highest among all quenchers, perhaps due to its high nuclear charge and small size. Quenching of CPL by metal ions follows the order Cu²⁺>Ni²⁺>Co²⁺>Ca²⁺>Zn²⁺>Mn²⁺>Mg²⁺. The quenching constant K_sv, bimolecular quenching constant K_q, binding constant K and the binding sites "n" were determined together with their thermodynamic parameters at 27 and 37°C. The positive entropy change indicated the gain in configurational entropy as a result of chelation. The process of interaction was spontaneous and mainly ΔS‐driven.     

Synthesis,Characterization and Applications of Immobilized Iminodiacetic Acid-Modified Silica

Porous immobilized iminodiacetic acid modified silica of the general formula S—(CH₂)₃—N(CH₂COOH)₂, (where S represents [Si—O] _n siloxane network) has been prepared by replacement of the iodide in 3-iodopropyl modified silica with diethyliminodiacetate. The immobilized-diethyliminodiacetate ligand system (S-DIDA) was then hydrolyzed by hydrochloric acid to produce the immobilized iminodiacetic acid ligand system (S-IDA). The iodo functionalized modified silica (S-I) was prepared by polycondensation of Si(OEt)₄ and (MeO)₃Si(CH₂)₃I. The XPS and CP/MAS ¹³C NMR spectra showed that not all iodine atoms are replaced and that the hydrolysis of ethyl acetate groups are incomplete upon treatment with HCl. The immobilized iminodiacetic acid ligand system exhibits high potential for the uptake of various di- and trivalent metal ions such as (Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺). Complexation of the iminodiacetate ligand system for the metal ions at the optimum conditions was found in the order: Cu²⁺ > Fe³⁺ > Ni²⁺ > Co²⁺ > Mn²⁺ > Zn²⁺. Stability studies of the iminodiacetate ligand system showed that a degradation of the siloxane network and leaching of some species occurred upon treatment with strong acid and base aqueous solutions.     

Complexation of metal ions with the novel 2-hydroxy-1-naphthaldehyde-derived diamine Schiff base carrying a macrobicyclic moiety with N2O2S2 mixed donor in acetonitrile-dichloromethane

A new Schiff base containing a macrobicyclic moiety was designed and synthesized by reaction of the corresponding macrobicyclic diamine compound and 2-hydroxy-1-naphthaldehyde. The influence of metal cations such as Zn²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺ and Pb²⁺ on the spectroscopic properties of the 2-hydroxy-1-naphtyl group linked to the macrobicyclic moiety with N₂O₂S₂ mixed donor was investigated in acetonitrile-dichloromethane solution (9.5/0.5) by means of absorption and emission spectrometry. Emission spectra undergo a marked blue shift and enhancement of naphtyl fluorescence in the presence of Fe³⁺ and Zn²⁺. The presence of Pb²⁺, Mn²⁺, Fe²⁺, Co²⁺ and Ni²⁺ caused a quenching of naphtyl fluorescence. Especially, the quenching was higher than 90% in case of the interaction of Ni²⁺ and Co²⁺ with the ligand. The results of spectrophotometric and spectrofluorimetric titration experiments disclosed the complexation properties of the novel ligand with Zn²⁺, Co²⁺ and Ni²⁺ cations.     

Transition Metal Ions: Charge Carriers that Mediate the Electron Capture Dissociation Pathways of Peptides

Electron capture dissociation (ECD) of model peptides adducted with first row divalent transition metal ions, including Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺, were investigated. Model peptides with general sequence of ZGGGXGGGZ were used as probes to unveil the ECD mechanism of metalated peptides, where X is either V or W; and Z is either R or N. Peptides metalated with different divalent transition metal ions were found to generate different ECD tandem mass spectra. ECD spectra of peptides metalated by Mn²⁺ and Zn²⁺ were similar to those generated by ECD of peptides adducted with alkaline earth metal ions. Series of c-/z-type fragment ions with and without metal ions were observed. ECD of Fe²⁺, Co²⁺, and Ni²⁺ adducted peptides yielded abundant metalated a-/y-type fragment ions; whereas ECD of Cu²⁺ adducted peptides generated predominantly metalated b-/y-type fragment ions. From the present experimental results, it was postulated that electronic configuration of metal ions is an important factor in determining the ECD behavior of the metalated peptides. Due presumably to the stability of the electronic configuration, metal ions with fully-filled (i.e., Zn²⁺) and half filled (i.e., Mn²⁺) d-orbitals might not capture the incoming electron. Dissociation of the metal ions adducted peptides would proceed through the usual ECD channel(s) via “hot-hydrogen” or “superbase” intermediates, to form series of c-/z ^•- fragments. For other transition metal ions studied, reduction of the metal ions might occur preferentially. The energy liberated by the metal ion reduction would provide enough internal energy to generate the “slow-heating” type of fragment ions, i.e., metalated a-/y- fragments and metalated b-/y- fragments.     

Chelation ion-exchange properties of salicylic acid-urea-formaldehyde copolymers

Chelation ion-exchange properties of copolymers prepared from salicylic acid, urea and formaldehyde by condensation in presence of acid catalyst were studied for Cu²⁺, Fe³⁺, UO²⁺, Mn²⁺,Zn²⁺ and Co²⁺ ions. A batch equilibration method was adopted to study the selectivity of metal ion uptake. This method involved the measurement of distribution of a given metal between the copolymer sample and a solution containing the metal ions. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for UO₂ ²⁺, Cu²⁺ and Fe³⁺ ions than Mn²⁺, Co²⁺ and Zn²⁺ ions.     

Die gravimetrische Halbmikro-Bestimmung des Palladiums mit Violursäure

Zusammenfassung Die Fällung des Palladiums als Violurat eignet sich zur Bestimmung des als Chlorid vorliegenden Metalls neben Pt⁴⁺, Co²⁺, Ni²⁺, Fe³⁺, Cu²⁺, Mn²⁺, Zn²⁺, Ca²⁺, den Alkalien und neben größeren Mengen von Pb²⁺-Ionen.

---

Summary The precipitation of palladium as violurate is suitable for the determination of the metal present as chloride even in the presence of: Pt⁴⁺, Co²⁺, Ni²⁺, Fe³⁺, Cu²⁺, Mn²⁺, Zn²⁺, Ca²⁺, the alkalis and also considerable amounts of Pb²⁺ ions.

---

Résumé Le précipité de violurate de palladium convient pour le dosage de cet élément préexistant sous forme de chlorure, en présence de Pt⁴⁺, Co²⁺, Ni²⁺, Fe³⁺, Cu²⁺, Mn²⁺, Zn²⁺, Ca²⁺, des métaux alcalins et de grandes quantités d'ions Pb²⁺.

     

Complexation of metal ions with the novel diazadithia crown ether carrying two anthryl pendants in acetonitrile–tetrahydrofuran

A new crown ether carrying two anthryl groups with nitrogen–sulfur donor atom was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-chloromethyl anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–tetrahydofuran solution (1/1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺ and Hg²⁺. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺and Hg²⁺cations. The presence of excess amounts of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. The ligand showed good sensitivity for Zn²⁺ with respect to other metal cations with linear range and detection limit of 1.4 × 10^?7 to 4.1 × 10^?6 M and 1.0 × 10^?8 M respectively.     

Complexation of metal ions with double-armed diazadithia lariat ether carrying anthracene moieties in acetonitrile–dioxane

A new 14-membered crown ether with nitrogen–sulfur donor atom carrying two anthryl groups was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-(chloromethyl) anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–dioxane solution (1/1) by means of absorption and emission spectrometry. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Hg²⁺ cations. Absorption spectra show isobestic points in the spectrophotometric titration of these cations. The presence of excess of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. Especially, the enhancement in case of the interaction of Hg²⁺ and Al³⁺ cations with the ligand was pronounced.     

1,8-萘酰亚胺为发色团的Zn2+荧光探针的合成及性能研究

合成了以1,8-萘酰亚胺为发色团,以联吡啶为离子受体的Zn²⁺荧光探针,并进行了表征及离子识别性能的研究。研究表明该化合物对Zn²⁺具有良好的识别性能,同时相对于Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺等金属离子具有良好的选择性。     

A SPECTRAL STUDY OF Cu2+ AND Cd2+ WITH A SUBSTITUTED PYRAZINE LIGAND

Abstract

We wish to report a novel ligand that forms an intense blue to purple color when complexed with various non-transition as well as transition metals. This color appears when Cd²⁺, Zn²⁺, Ag¹⁺, Mg²⁺ Fe²⁺, Fe³⁺, Cu²⁺, Co²⁺, Ni²⁺, or Mn²⁺ is added to N,N′-bis(4-N″,N″-dimethylanilinyl)-2,5-bis(methylenimino)pyrazine (Figure 1) which is dissolved in dimethylformamide (DMF). The ligand is capable of being multidentate; therefore, spectro-photometric titration experiments were performed using Cd²⁺ in one experiment and Cu²⁺ in another experiment. If these ions can be considered as being representative of the non-transition and transition complexes respectively, then the stoichiometry is 1:1 and 2:1 (metal:ligand). Whether this sampling is truly representative is under further investigation.     

A new fluorescent sensor bearing three dansyl fluorophores for highly sensitive and selective detection of mercury(II) ions

A novel fluorometric sensor bearing three dansyl moieties based on tris[2-(2-aminoethylthio)ethyl]amine was prepared by a simple approach using a conventional two-step synthesis. The sensor exhibits highly Hg²⁺-selective ON-OFF fluorescence quenching behavior in aqueous acetonitrile solutions and is shown to discriminate various competing metal ions, particularly Cu²⁺, Ag⁺, and Pb²⁺ as well as Ca²⁺, Cd²⁺, Co²⁺, Fe³⁺, Mn²⁺, Na⁺, Ni²⁺, and Zn²⁺, with a detection limit of 1.15 × 10⁻⁷ M or 23 ppb.     

Fluorescence quenching studies on the interaction of a novel deepened cavitand towards some transition metal ions

A novel ‘three-level’ deepened cavitand featuring a significantly sizable portal has been synthesized and its interaction with some transition metal ions has been investigated in THF/H₂O binary solvent using fluorescence quenching technique. The results suggest that among the used transition metal ions including Ag⁺, Cd²⁺, Cu²⁺, Fe³⁺, Cr³⁺, Hg²⁺, La³⁺, Mn²⁺, Ni²⁺, Zn²⁺ and Co²⁺, only Fe³⁺ and Cu²⁺ show good quenching ability. In order to interpret the quenching mechanism, the Stern–Volmer kinetics, and the presence of both the dynamic and static quenching have been discussed. It was found that the simultaneous presence of the sphere-of-action static quenching and dynamic quenching model agrees very well with the experimental results. The limits of detection for Fe³⁺ and Cu²⁺ were found to be 2.1 × 10⁻⁶ mol L⁻¹ (3σ) and 3.6 × 10⁻⁶ mol L⁻¹ (3σ), respectively. Cations with potential interference, such as K⁺, Na⁺, Mg²⁺, Ca²⁺, Co²⁺, La³⁺ and Mn²⁺ do not have significant effects on the determinations of Fe³⁺ and Cu²⁺. This cavitand can be potentially applied as optical sensor for the detection of Fe³⁺ and Cu²⁺.     

Complexation of 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Mg2+, Ca2+, Mn2+, Fe3+, Fe2+, Co2+, Ni2+, Cu2+, and Zn2+ ions in aqueous solution

In a search for environmental-friendly metal chelating ligands for industrial applications, the protonation and complex formation equilibria of 3-hydroxy-2,2′-iminodisuccinic acid with Mg²⁺, Ca²⁺, Mn²⁺, Fe³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ ions in aqueous 0.1 mol L^?1 NaCl solution were studied at 25°C by potentiometric titration. The model for complexation and the stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. In all cases, complex formation was dominated by stable ML ^{n ?4} complexes.     

Advanced oxidation processes for decolorization of aqueous solution containing acid red G azo dye

Some investigations concerning the decolorization of Acid Red G azo dye by photooxidation with hydrogen peroxide were performed. The influences of pH, oxidant concentration, and the presence of Fe²⁺ or other metal ions (Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺) as potential catalysts, were investigated. The best results were obtained in the presence of ferrous ions in acid and neutral media. The other ions are not as effective as Fe²⁺ for dye decolorization. Co²⁺ and Cu²⁺ ions have a catalytic action, at low concentration, within a wide range of pH. Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid pH values, but show a weak action in alkaline media.     

1-(d-Glucopyranosyl-2′-deoxy-2′-iminomethyl)-2-hydroxynaphthalene as chemo-sensor for Fe in aqueous HEPES buffer based on colour changes observable with the naked eye

A new glucose-based C2-derivatized colorimetric chemo-sensor (L₁) has been synthesized by a one-step condensation of glucosamine and 2-hydroxy-1-naphthaldehyde for the recognition of transition metal ions. Among the eleven metal ions studied, viz., Mg²⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Hg²⁺, L₁ results in visual colour change only in the presence of Fe²⁺, Fe³⁺and Cu²⁺ in methanol. However, in an aqueous HEPES buffer (pH 7.2) it is only the Fe³⁺ that gives a distinct visual colour change even in the presence of other metal ions, up to a concentration of 280 ppb. The changes have been explained based on the complex formed, and the composition has been determined to be 2:1 between L₁ and Fe³⁺ based on Job’s plot as well as ESI MS. The structure of the proposed complex has been derived based on HF/6-31G calculations.     

Photo-physical behavior as chemosensor properties of anthracene-anchored 1,3-di-derivatives of lower rim calix[4]arene towards divalent transition metal ions

Anthracene anchored 1,3-di-derivatives of lower rim p-tert-butyl-calix[4]arene were synthesized and characterized. These derivatives were subjected to the binding studies with the divalent metal ions, viz., Mg²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ using fluorescence and absorption spectra. The imine moiety that is in conjugation with the anthryl unit is responsible for quenching the fluorescence in the absence of metal ion, however, in the presence of Fe²⁺ and Cu²⁺, the spectra showed very high enhancement in fluorescence intensity indicating that the lone pair present on the imine-N is involved in the metal ion binding and as a result the photo-induced electron transfer is prevented. Based on the photo-physical studies, it has been found that the anthracene derivative that is coupled with the calix[4]arene unit through an imine bond acts as a chemosensor for Fe²⁺ and Cu²⁺. The fluorescence studies are further augmented by the absorption spectra.     

Selective detection of phosphaphenanthrenecontaining luminophors with aggregation-induced emission enhancement to transition metal ions

Transition metal ions (Pb²⁺, Zn²⁺, Cd²⁺, Co²⁺, Mn²⁺, Cu²⁺, Ni²⁺, Hg²⁺, Ag⁺, Fe³⁺) in water are used to quench emission of 2-(6-oxido-6H-dibenz 〈c,e〉 〈1,2〉 oxaphosphorin-6-yl)-1,4-phenylene-bis(p-pentyloxylbenzoate)s (MD5) with aggregation-induced emission enhancement (AIEE) in water-acetonitrile (AN) mixture (80:20 by volume). Among all metal ions, Fe³⁺ exhibits the highest quenching efficiency on AIEE of MD5 even when the concentration of Fe³⁺ is lower than 1×10⁻⁶ mol/L. The quenching efficiency of Hg²⁺ is lower than that of Fe³⁺ at the same concentration, though MD5 is used to detect Hg²⁺ efficiently, too. To other metal ions, low quenching efficiency has few relations with a wider concentration range. The UV absorbance spectra show only red shift of absorbance wavelength in the presence of Hg²⁺ and Fe³⁺, which indicates a salt-induced Jaggregation. SEM photos reveal larger aggregation and morphological change of nanoparticles of MD5 in water containing Hg²⁺ and Fe³⁺, which reduce the surface area of MD5 emission for further aggregation. The selective quenching effect of transition metal ions to emission of MD5 has a potential application in chemical sensors of some metal ions.     

Co-ordination polymers of bis(8-hydroxy-5-quinolylmethylene) sulphide (BHQS)

Co-ordination polymers of bis(8-hydroxy-5-quinolylmethylene)sulphide have been prepared with Zn²⁺, Cu²⁺, Ni²⁺, Co²⁺ and Mn²⁺ ions and characterized by elemental analyses, by i.r. and diffuse reflectance spectral studies and by magnetic moment. The metal contents in all polymers are found to be consistent with 1:1 (metal:ligand) stoichiometry. The thermal behaviour of each of the co-ordination polymer has been studied by TGA in air up to 700°C.     

Spectroscopic Characterization of <Emphasis Type="Italic">N,N-bis</Emphasis>(2-{[(2,2-Dimethyl-1,3-Dioxolan-4-yl)Methyl]Amino}Ethyl) N′,N′-Dihydroxyethanediimidamide and Its Complexes

A new dioxime ligand, N,N-bis(2-{[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl]amino} ethyl)N′,N′-dihydroxyethanediimidamide (H₂L), and its mononuclear complexes with Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ are synthesized. H₂L forms transition metal complexes [Co(LH)₂(H₂O)₂] and [M(LH)₂] (M = Ni²⁺, Cu²⁺) with a metal : ligand ratio of 1 : 2. Complexes [M(H₂L)(Cl)₂] (Zn²⁺, Cd²⁺) have a metal : ligand ratio of 1 : 1. The mononuclear Co²⁺, Ni²⁺, and Cu²⁺ complexes indicate that the metal ions coordinate ligand through its two N atoms, as the most of dioximes. In the Co²⁺ complex, two water molecules and in the Zn²⁺ and Cd²⁺ complexes two chloride ions are also coordinated to the metal ion. The structures of these compounds are identified by elemental analyses, IR, ¹H and ¹³C NMR, electronic spectra, magnetic susceptibility measurements, conductivity, and thermogravimetric analysis.__________From Koordinatsionnaya Khimiya, Vol. 31, No. 7, 2005, pp. 540–544.Original English Text Copyright © 2005 by Canpolat, Kaya.The text was submitted by the authors in English.     

Transition metal complexes derived from N′-(4-fluorobenzylidene)-2-(quinolin-2-yloxy) acetohydrazide: Synthesis,structural characterization,and biocidal evaluation

Mononuclear Mn²⁺ and Cu²⁺, - VO²⁺, Co²⁺, Ni²⁺, - and Zn²⁺ complexes of a synthetic novel hydrazone containing a quinoline moiety were prepared. The composition and structure of the prepared compounds were elucidated by spectral and analytical techniques. The results reveal that all complexes were formed in 1:1 mole ratio except Mn²⁺ and Cu²⁺ complexes ( 3 ) and ( 7) , which were formed in 1 M:2 L mole ratio. It was also found that the ligand binds the metal ions via NO donor sites as a monobasic bidentate chelator in all complexes through the enolic carbonyl oxygen and azomethine nitrogen atoms. The electronic absorption spectra and magnetic moment data demonstrated square pyramidal and octahedral geometries for the VO²⁺ and Ni²⁺ complexes, respectively, while the other complexes adopted tetrahedral geometry. The thermal decomposition of the complexes was discussed in relation to structure. The thermal analysis data demonstrated that all complexes were decomposed in one, two, three or four stages starting with the dehydration process, removal of coordination water molecules or elimination of anions and ended with the formation of the metal oxide. The bactericidal activities of the prepared compounds demonstrated that hydrazone ( 1) exerted a highly inhibitory effect against B. subtilis while VO²⁺, Co²⁺, and Cu²⁺ complexes ( 2) , ( 4) , and ( 7) showed an inhibitory effect against E. coli more than the tetracycline. Additionally, the inhibitory effect of the prepared compound against A. niger showed that the Cu²⁺ complex ( 6) is the most active while the Ni²⁺, Cu²⁺, and Zn²⁺ complexes ( 5–8) exhibited an extremely inhibitory effect against C. albicans.