Ultra‐Narrow Depletion Layers in a Hematite Mesocrystal‐Based Photoanode for Boosting Multihole Water Oxidation

Significant charge recombination that is difficult to suppress limits the practical applications of hematite (α‐Fe₂O₃) for photoelectrochemical water splitting. In this study, Ti‐modified hematite mesocrystal superstructures assembled from highly oriented tiny nanoparticle (NP) subunits with sizes of ca. 5 nm were developed to achieve the highest photocurrent density (4.3 mA cm^?2 at 1.23 V vs. RHE) ever reported for hematite‐based photoanodes under back illumination. Owing to rich interfacial oxygen vacancies yielding an exceedingly high carrier density of 4.1×10²¹ cm^?3 for super bulk conductivity in the electrode and a large proportion of ultra‐narrow depletion layers (<1 nm) inside the mesoporous film for significantly improved hole collection efficiency, a boosting of multihole water oxidation with very low activation energy (E_a=44 meV) was realized.     

Ultrathin FeOOH Nanolayers with Abundant Oxygen Vacancies on BiVO4 Photoanodes for Efficient Water Oxidation

Photoelectrochemical (PEC) water splitting is a promising method for storing solar energy in the form of hydrogen fuel, but it is greatly hindered by the sluggish kinetics of the oxygen evolution reaction (OER). Herein, a facile solution impregnation method is developed for growing ultrathin (2 nm) highly crystalline β‐FeOOH nanolayers with abundant oxygen vacancies on BiVO₄ photoanodes. These exhibited a remarkable photocurrent density of 4.3 mA cm^?2 at 1.23 V (vs. reversible hydrogen electrode (RHE), AM 1.5 G), which is approximately two times higher than that of amorphous FeOOH fabricated by electrodeposition. Systematic studies reveal that the excellent PEC activity should be attributed to their ultrathin crystalline structure and abundant oxygen vacancies, which could effectively facilitate the hole transport/trapping and provide more active sites for water oxidation.     

Interim Anatase Coating Layer Stabilizes Rutile@CrxOy Photoanode for Visible‐Light‐Driven Water Oxidation

Ternary core–shell heterostructured rutile@anatase@Cr_xO_y nanorod arrays were elaborately designed as photoanodes for efficient photoelectrochemical water splitting under visible‐light illumination. The four‐fold enhanced and stabilized visible‐light photocurrent highlights the unique role of the interim anatase layer in accelerating the interfacial charge transfer from the Cr_xO_y chromophore to rutile nanorods.     

A Robust,Precious‐Metal‐Free Dye‐Sensitized Photoanode for Water Oxidation: A Nanosecond‐Long Excited‐State Lifetime through a Prussian Blue Analogue

Herein, we establish a simple synthetic strategy affording a heterogeneous, precious metal‐free, dye‐sensitized photoelectrode for water oxidation, which incorporates a Prussian blue (PB) structure for the sensitization of TiO₂ and water oxidation catalysis. Our approach involves the use of a Fe(CN)₅ bridging group not only as a cyanide precursor for the formation of a PB‐type structure but also as an electron shuttle between an organic chromophore and the catalytic center. The resulting hetero‐functional PB‐modified TiO₂ electrode demonstrates a low‐cost and easy‐to‐construct photoanode, which exhibits favorable electron transfers with a remarkable excited state lifetime on the order of nanoseconds and an extended light absorption capacity of up to 500 nm. Our approach paves the way for a new family of precious metal‐free robust dye‐sensitized photoelectrodes for water oxidation, in which a variety of common organic chromophores can be employed in conjunction with CoFe PB structures.     

A Semiconductor-Mediator-Catalyst Artificial Photosynthetic System for Photoelectrochemical Water Oxidation

In fabricating an artificial photosynthesis (AP) electrode for water oxidation, we have devised a semiconductor-mediator-catalyst structure that mimics photosystem II (PSII). It is based on a surface layer of vertically grown nanorods of Fe₂O₃ on fluorine doped tin oxide (FTO) electrodes with a carbazole mediator base and a Ru(II) carbene complex on a nanolayer of TiO₂ as a water oxidation co-catalyst. The resulting hybrid assembly, FTO|Fe₂O₃|−carbazole|TiO₂|−Ru(carbene) , demonstrates an enhanced photoelectrochemical (PEC) water oxidation performance compared to an electrode without the added carbaozle base with an increase in photocurrent density of 2.2-fold at 0.95 V vs. NHE and a negatively shifted onset potential of 500 mV. The enhanced PEC performance is attributable to carbazole mediator accelerated interfacial hole transfer from Fe₂O₃ to the Ru(II) carbene co-catalyst, with an improved effective surface area for the water oxidation reaction and reduced charge transfer resistance.     

Dual Oxygen and Tungsten Vacancies on a WO3 Photoanode for Enhanced Water Oxidation

Alleviating charge recombination at the electrode/electrolyte interface by introducing an overlayer is considered an efficient approach to improve photoelectrochemical (PEC) water oxidation. A WO₃ overlayer with dual oxygen and tungsten vacancies was prepared by using a solution‐based reducing agent, LEDA (lithium dissolved in ethylenediamine), which improved the PEC performance of the mesoporous WO₃ photoanode dramatically. In comparison to the pristine samples, the interconnected WO₃ nanoparticles surrounded by a 2–2.5 nm thick overlayer exhibited a photocurrent density approximately 2.4 times higher and a marked cathodic shift of the onset potential, which is mainly attributed to the facilitative effect on interface charge transfer and the improved conductivity by enhanced charge carrier density. This simple and effective strategy may provide a new path to improve the PEC performance of other photoanodes.     

Enhancing Hematite Photoanode Activity for Water Oxidation by Incorporation of Reduced Graphene Oxide

Two effective methods to prepare reduced graphene oxide (rGO)/hematite nanostructured photoanodes and their photoelectrochemical characterization towards water splitting reactions are presented. First, graphene oxide (GO) is reduced to rGO using hydrazine in a basic solution containing tetrabutylammonium hydroxide (TBAOH), and then deposited over the nanostructured hematite photoanodes previously treated at 750 °C for 30 min. The second method follows the deposition of a paste containing a mixture of hematite nanoparticles and rGO sheets by the doctor‐blade method, varying the rGO concentration. Since hematite suffers from low electron mobility, a low absorption coefficient, high recombination rates and slow reaction kinetics, the incorporation of rGO in the hematite can overcome such limitations due to graphene's exceptional properties. Using the first method, the rGO incorporation results in a photocurrent density increase from 0.56 to 0.82 mA cm^?2 at 1.23 V_RHE. Our results indicate that the rGO incorporation in the hematite photoanodes shows a positive effect in the reduction of the electron–hole recombination rate.     

Electro‐assembly of a Chromophore–Catalyst Bilayer for Water Oxidation and Photocatalytic Water Splitting

The use of electropolymerization to prepare electrocatalytically and photocatalytically active electrodes for water oxidation is described. Electropolymerization of the catalyst Ru^II(bda)(4‐vinylpyridine)₂ (bda=2,2′‐bipyridine‐6,6′‐dicarboxylate) on planar electrodes results in films containing semirigid polymer networks. In these films there is a change in the water oxidation mechanism compared to the solution analogue from bimolecular to single‐site. Electro‐assembly construction of a chromophore–catalyst structure on mesoporous, nanoparticle TiO₂ films provides the basis for a dye‐sensitized photoelectrosynthesis cell (DSPEC) for sustained water splitting in a pH 7 phosphate buffer solution. Photogenerated oxygen was measured in real‐time by use of a two‐electrode cell design.     

Enhanced Photoelectrochemical Water Oxidation from CdTe Photoanodes Annealed with CdCl2

Most CdTe photoanodes and photocathodes show positive and negative photocurrent onset potentials for water oxidation and reduction, respectively, and are thus unable to drive photoelectrochemical (PEC) water splitting without external applied biases. Herein, the activity of a CdTe photoanode having an internal p‐n junction during PEC water oxidation was enhanced by applying a CdCl₂ annealing treatment together with surface modifications. The resulting CdTe photoanode generated photocurrents of 1.8 and 5.4 mA cm^?2 at 0.6 and 1.2 V_RHE, respectively, with a photoanodic current onset potential of 0.22 V_RHE under simulated sunlight (AM 1.5G). The CdCl₂ annealing increased the grain sizes and lowered the density of grain boundaries, allowing more efficient charge separation. Consequently, a two‐electrode tandem PEC cell comprising a CdTe‐based photoanode and photocathode split water without any external bias at a solar‐to‐hydrogen conversion efficiency of 0.51 % at the beginning of the reaction.     

Boosting the Photoactivity of BiVO4 Photoanodes by a ZnCoFe-LDH Thin Layer for Water Oxidation

Monoclinic bismuth vanadate (BiVO₄) has been used as an efficient photoanode material for photoelectrochemical water oxidation owing to its suitable band gap and nontoxicity. Nevertheless, the practical application of BiVO₄ photoanode has been severely limited by the surface charge recombination and sluggish kinetic, which leads to the obtained photoactivity of BiVO₄ is much lower than its theoretical value. In this case, ZnCoFe-LDH thin layer is conformally decorated on the porous BiVO₄ photoanode through a simple electrodeposition process. The results show that a boosted photoactivity and a remarkably enhanced photocurrent density (3.43 mA cm⁻² at 1.23 V_RHE) are attained for BiVO₄/ZnCoFe-LDH. In addition, the optimized BiVO₄/ZnCoFe-LDH photoanode exhibits significant negative shift in the onset potential (0.51 V_RHE to 0.21 V_RHE), promotes charge separation efficiency (49.3% to 60.4% in the bulk, 29.6% to 61.9% on the surface at 1.23 V_RHE) and enhanced IPCE efficiency (25.5% to 54.7% at 425 nm) compared with that of bare BiVO₄ photoanode. It is demonstrated that the boosted photoactivity of BiVO₄/ZnCoFe-LDH photoanode is mainly ascribed to the synergy effects of the formation of p-n heterojunction between ZnCoFe-LDH and BiVO₄ to accelerate the photogenerated charge transfer and separation, broaden light absorption, as well as promote the surface water oxidation kinetics.     

Photochemical,Electrochemical, and Photoelectrochemical Water Oxidation Catalyzed by Water‐Soluble Mononuclear Ruthenium Complexes

Two mononuclear ruthenium complexes [Ru(H₂tcbp)(isoq)₂] ( 1 ) and [Ru(H₂tcbp)(pic)₂] ( 2 ) (H₄tcbp=4,4′,6,6′‐tetracarboxy‐2,2′‐bipyridine, isoq=isoquinoline, pic=4‐picoline) are synthesized and fully characterized. Two spare carboxyl groups on the 4,4′‐positions are introduced to enhance the solubility of 1 and 2 in water and to simultaneously allow them to tether to the electrode surface by an ester linkage. The photochemical, electrochemical, and photoelectrochemical water oxidation performance of 1 in neutral aqueous solution is investigated. Under electrochemical conditions, water oxidation is conducted on the deposited indium‐tin‐oxide anode, and a turnover number higher than 15,000 per water oxidation catalyst (WOC) 1 is obtained during 10 h of electrolysis under 1.42 V vs. NHE, corresponding to a turnover frequency of 0.41 s^?1. The low overpotential (0.17 V) of electrochemical water oxidation for 1 in the homogeneous solution enables water oxidation under visible light by using [Ru(bpy)₃]²⁺ ( P1 ) (bpy=2,2′‐bipyridine) or [Ru(bpy)₂(4,4′‐(COOEt)₂‐bpy)]²⁺ ( P2 ) as a photosensitizer. In a three‐component system containing 1 or 2 as a light‐driven WOC, P1 or P2 as a photosensitizer, and Na₂S₂O₈ or [CoCl(NH₃)₅]Cl₂ as a sacrificial electron acceptor, a high turnover frequency of 0.81 s^?1 and a turnover number of up to 600 for 1 under different catalytic conditions are achieved. In a photoelectrochemical system, the WOC 1 and photosensitizer are immobilized together on the photoanode. The electrons efficiently transfer from the WOC to the photogenerated oxidizing photosensitizer, and a high photocurrent density of 85 μA cm^?2 is obtained by applying 0.3 V bias vs. NHE.     

多金属氧酸盐催化的水氧化研究进展

氢气以其清洁无污染、燃烧值高等优点成为未来最具潜力的可再生能源之一,而清洁生产氢气的最佳选择之一即为裂解水. 利用太阳能模拟光合作用实现水的全分解产生氢气和氧气是目前最为理想的能源转化方式,并且已经引起了众多研究者的关注. 水分解的半反应之一--水氧化反应由于其过程复杂,一直是制约水分解的瓶颈. 所以寻找高效、稳定的水氧化催化剂便成为了突破该瓶颈的关键. 多金属氧酸盐是一类以前过渡金属氧簇为基本单元形成的多金属氧簇化合物. 由于多金属氧酸盐在物理、化学性质方面具有无法比拟的特性,使得其在催化、药物、纳米科技和材料科学等方面已被广泛地应用. 多金属氧酸盐的全无机配体可很好地抵御水氧化反应的强氧化性环境,故将其作为水氧化催化剂越来越引起研究者们的注意,并且已有多种多金属氧酸盐被设计为水氧化催化剂. 本文详细介绍了各种不同过渡金属取代的多金属氧酸盐水氧化催化剂的研究进展.     

Cs2PtI6 Halide Perovskite is Stable to Air,Moisture, and Extreme pH: Application to Photoelectrochemical Solar Water Oxidation

Halide perovskites show incredible photovoltaic power conversion efficiency coupled with several hundreds of hours of device stability. However, their stability is poor in aqueous electrolyte media. Reported here is a vacancy ordered halide perovskite, Cs₂PtI₆, which shows extraordinary stability under ambient conditions (1 year), in aqueous media of extreme acidic (pH 1), basic (pH 13), and under electrochemical reduction conditions. It was employed as an electrocatalyst and photoanode for hydrogen production and water oxidation, respectively. The catalyst remains intact for at least 100 cycles of electrochemical cycling and six hours of hydrogen production at pH 1. Cs₂PtI₆ was employed as a photoanode for PEC water oxidation, and the material displayed a photocurrent of 0.8 mA cm⁻² at 1.23 V (vs. RHE) under simulated AM1.5G sunlight. Using constant voltage measurement, Cs₂PtI₆ exhibited over 12 hours of PEC stability without loss of performance.     

Efficient Hole Extraction from a Hole‐Storage‐Layer‐Stabilized Tantalum Nitride Photoanode for Solar Water Splitting

One of the major hurdles that impedes the practical application of photoelectrochemical (PEC) water splitting is the lack of stable photoanodes with low onset potentials. Here, we report that the Ni(OH)_x/MoO₃ bilayer, acting as a hole‐storage layer (HSL), efficiently harvests and stores holes from Ta₃N₅, resulting in at least 24 h of sustained water oxidation at the otherwise unstable Ta₃N₅ electrode and inducing a large cathodic shift of ≈600 mV in the onset potential of the Ta₃N₅ electrode.     

Cs2PtI6 Halide Perovskite is Stable to Air,Moisture, and Extreme pH: Application to Photoelectrochemical Solar Water Oxidation

Halide perovskites show incredible photovoltaic power conversion efficiency coupled with several hundreds of hours of device stability. However, their stability is poor in aqueous electrolyte media. Reported here is a vacancy ordered halide perovskite, Cs₂PtI₆, which shows extraordinary stability under ambient conditions (1 year), in aqueous media of extreme acidic (pH 1), basic (pH 13), and under electrochemical reduction conditions. It was employed as an electrocatalyst and photoanode for hydrogen production and water oxidation, respectively. The catalyst remains intact for at least 100 cycles of electrochemical cycling and six hours of hydrogen production at pH 1. Cs₂PtI₆ was employed as a photoanode for PEC water oxidation, and the material displayed a photocurrent of 0.8 mA cm^?2 at 1.23 V (vs. RHE) under simulated AM1.5G sunlight. Using constant voltage measurement, Cs₂PtI₆ exhibited over 12 hours of PEC stability without loss of performance.     

Boosting Electrochemical Water Oxidation with Metal Hydroxide Carbonate Templated Prussian Blue Analogues

The development of efficient and stable catalyst systems with low‐cost, abundant, and non‐toxic materials is the primary demand for electrochemical water oxidation. A unique method is reported for the syntheses of metal hydroxide carbonate templated Prussian blue analogues (PBAs) on carbon cloth and their outstanding water oxidation activities in alkaline medium. The best water oxidation activity is obtained with cobalt hydroxide carbonate templated t‐Co^II‐Co^III with an overpotential as low as 240 mV to reach a current density of 10 mA cm^?2. It produces constant current over 50 h in chronoamperometric measurements. Moreover, the catalysts outperform the activities of the PBAs prepared without any template and even the noble metal catalyst RuO₂. Spectroscopic and microscopic studies show that the PBAs are transformed into layered hydroxide–oxyhydroxide structures during electrochemical process and provide the active sites for the water oxidation.     

Surface Engineering of g‐C3N4 by Stacked BiOBr Sheets Rich in Oxygen Vacancies for Boosting Photocatalytic Performance

BiOBr containing surface oxygen vacancies (OVs) was prepared by a simple solvothermal method and combined with graphitic carbon nitride (g‐C₃N₄) to construct a heterojunction for photocatalytic oxidation of nitric oxide (NO) and reduction of carbon dioxide (CO₂). The formation of the heterojunction enhanced the transfer and separation efficiency of photogenerated carriers. Furthermore, the surface OVs sufficiently exposed catalytically active sites, and enabled capture of photoexcited electrons at the surface of the catalyst. Internal recombination of photogenerated charges was also limited, which contributed to generation of more active oxygen for NO oxidation. Heterojunction and OVs worked together to form a spatial conductive network framework, which achieved 63 % NO removal, 96 % selectivity for carbonaceous products (that is, CO and CH₄). The stability of the catalyst was confirmed by cycling experiments and X‐ray diffraction and transmission electron microscopy after NO removal.