The Combination of 2D Layered Graphene Oxide and 3D Porous Cellulose Heterogeneous Membranes for Nanofluidic Osmotic Power Generation

Salinity gradient energy, as a type of blue energy, is a promising sustainable energy source. Its energy conversion efficiency is significantly determined by the selective membranes. Recently, nanofluidic membrane made by two-dimensional (2D) nanomaterials (e.g., graphene) with densely packed nanochannels has been considered as a high-efficient membrane in the osmotic power generation research field. Herein, the graphene oxide-cellulose acetate (GO–CA) heterogeneous membrane was assembled by combining a porous CA membrane and a layered GO membrane; the combination of 2D nanochannels and 3D porous structures make it show high surface-charge-governed property and excellent ion transport stability, resulting in an efficient osmotic power harvesting. A power density of about 0.13 W/m² is achieved for the sea–river mimicking system and up to 0.55 W/m² at a 500-fold salinity gradient. With different functions, the CA and GO membranes served as ion storage layer and ion selection layer, respectively. The GO–CA heterogeneous membrane open a promising avenue for fabrication of porous and layered platform for wide potential applications, such as sustainable power generation, water purification, and seawater desalination.     

Water Transport with Ultralow Friction through Partially Exfoliated g-C3N4 Nanosheet Membranes with Self-Supporting Spacers

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) nanosheets show brilliant application potential in numerous fields. Herein, a membrane with artificial nanopores and self-supporting spacers was fabricated by assembly of 2D g-C₃N₄ nanosheets in a stack with elaborate structures. In water purification the g-C₃N₄ membrane shows a better separation performance than commercial membranes. The g-C₃N₄ membrane has a water permeance of 29 L m⁻² h⁻¹ bar⁻¹ and a rejection rate of 87 % for 3 nm molecules with a membrane thickness of 160 nm. The artificial nanopores in the g-C₃N₄ nanosheets and the spacers between the partially exfoliated g-C₃N₄ nanosheets provide nanochannels for water transport while bigger molecules are retained. The self-supported nanochannels in the g-C₃N₄ membrane are very stable and rigid enough to resist environmental challenges, such as changes to pH and pressure conditions. Permeation experiments and molecular dynamics simulations indicate that a novel nanofluidics phenomenon takes place, whereby water transport through the g-C₃N₄ nanosheet membrane occurs with ultralow friction. The findings provide new understanding of fluidics in nanochannels and illuminate a fabrication method by which rigid nanochannels may be obtained for applications in complex or harsh environments.     

The effect of the ion exchanger site-counterion complex formation on the selectivities of ISEs

Using the model of ideally associated solution, the effect of ion association of the ion exchanger sites with main and foreign counterions on the selectivity of ISEs based on liquid ion exchangers has been considered. Equations which describe the potentiometric selectivity coefficient as a function of ion association constants in the membrane phase and of standard free energies of transfer of the determined and foreign ions from water to the membrane are obtained for the following main cases: (a) the determined and foreign ions are single-charged; (b) the determined ion is double-charged and the foreign ion is single-charged. It is shown that in the case of single-charged main and foreign ions, the ratio of the ion association constants has a great effect on the potentiometric selectivity of membranes, only if the ion exchanger sites produce less strong associates with the determined counterion as compared with the foreign one. Otherwise, this effect is insignificant. The selectivity for double-charged ions should increase, other things being equal, as the first constant of association of these ions with the ion exchanger sites increases. The effect of producing ion triplets of the type I(2)R((+/-)) on the selectivity of ISEs is also considered. Experimental data are presented which illustrate the effect of the nature of the ion exchanger on the potentiometric selectivity. Some procedures employing the factor of ion association for increasing the potentiometric selectivity of liquid ion exchange membranes are considered.     

Water Transport with Ultralow Friction through Partially Exfoliated g‐C3N4 Nanosheet Membranes with Self‐Supporting Spacers

Two‐dimensional (2D) graphitic carbon nitride (g‐C₃N₄) nanosheets show brilliant application potential in numerous fields. Herein, a membrane with artificial nanopores and self‐supporting spacers was fabricated by assembly of 2D g‐C₃N₄ nanosheets in a stack with elaborate structures. In water purification the g‐C₃N₄ membrane shows a better separation performance than commercial membranes. The g‐C₃N₄ membrane has a water permeance of 29 L m⁻² h⁻¹ bar⁻¹ and a rejection rate of 87 % for 3 nm molecules with a membrane thickness of 160 nm. The artificial nanopores in the g‐C₃N₄ nanosheets and the spacers between the partially exfoliated g‐C₃N₄ nanosheets provide nanochannels for water transport while bigger molecules are retained. The self‐supported nanochannels in the g‐C₃N₄ membrane are very stable and rigid enough to resist environmental challenges, such as changes to pH and pressure conditions. Permeation experiments and molecular dynamics simulations indicate that a novel nanofluidics phenomenon takes place, whereby water transport through the g‐C₃N₄ nanosheet membrane occurs with ultralow friction. The findings provide new understanding of fluidics in nanochannels and illuminate a fabrication method by which rigid nanochannels may be obtained for applications in complex or harsh environments.     

石墨烯狭缝受限孔道中水分子的分子动力学模拟

石墨烯是一种具有广泛应用前景的纳米材料,特别是由石墨烯片层自组装形成的二维纳米通道能够应用于物质的过滤分离.本文采用分子动力学模拟方法研究了原态石墨烯/羟基改性石墨烯狭缝孔道中水分子的微观行为,模拟计算了水的界面结构性质和扩散动力学性质,所研究的石墨烯孔宽为0.6-1.5 nm.模拟结果表明,在石墨烯狭缝孔道中,水分子受限结构呈现层状分布,在超微石墨烯孔道(0.6-0.8 nm)中水分子可形成特殊的环状有序结构,石墨烯表面可诱导产生特殊的水分子界面取向.在石墨烯孔道中,水分子的扩散运动低于主体相水分子的扩散运动,羟基化石墨烯孔道可以促使水分子的扩散能力降低.对于改性石墨烯狭缝孔道,由于羟基的作用,水分子可以自发渗入0.6 nm的石墨烯孔道内.模拟所得到的受限水分子的动力学性质与水分子在石墨烯孔道内的有序结构有关.本文研究结果将有助于分析理解水分子通过石墨烯纳米通道的渗透机理,为设计基于石墨烯的纳米膜提供理论指导.     

Competition between cation-pi interactions and intermolecular hydrogen bonds in alkali metal ion-phenol clusters. I. Phenol dimer

The competition between ion-molecule and molecule-molecule interactions was investigated in M+(phenol)2 cluster ions for M=Li, Na, K, and Cs. Infrared predissociation spectroscopy in the O-H stretch region was used to characterize the structure of the cluster ions. By adjusting the experimental conditions, it was possible to generate species where argon was additionally bound in order to investigate cold cluster ions. The spectra showed the presence of hydrogen bonding in the colder M+(phenol)2Ar cluster ions but the absence of hydrogen bonding in the warmer M+(phenol)2 species. For the cold species, the IR spectra were compared with minimum-energy ab initio calculations to elucidate the hydrogen-bonded structures. In the dominant hydrogen-bonded configurations observed experimentally, the phenol molecules form hydrogen-bonded dimers and the alkali-metal ions bind to the phenol via a cation-pi interaction with the aromatic ring. Increasing the strength of the cation-pi interaction by decreasing the ion size forces the distance between the phenol O-H groups to increase, thus weakening the intermolecular hydrogen bond. Free-energy differences of different configurations relative to the ground state demonstrate that hydrogen-bonded structures are enthalpically favored, while non-hydrogen-bonded structures are entropically favored and are thus observed in the warm cluster ions.     

Selective pervaporation of water through a nonselective microporous titania membrane by a dynamically induced molecular sieving mechanism

Pervaporation experiments were performed on microporous titania membranes using several binary liquids containing 2-20 wt % water. The membrane was nonselective in the separation of water from alcohols and p-dioxane but showed a remarkably high selectivity in the separation of water from ethylene glycol/water mixtures with < or =15 mol % water. The absence of selectivity under most conditions is explained by the large pore size (0.9 nm) of microporous titania. The high selectivity for water in the separation from ethylene glycol can be explained by the formation of a hydrogen-bonded network of ethylene glycol in the micropores, which blocks transport of ethylene glycol, while water can still permeate through. These networks are disrupted by water at higher concentrations, leading to full loss of membrane selectivity.     

Preparation and characterization of monovalent cation selective sulfonated poly(ether ether ketone) and poly(ether sulfone) composite membranes

Highly charged cation permeable composite membranes were prepared by blending of sulfonated poly(ether sulfone) (SPES) with sulfonated poly(ether ether ketone) (SPEEK) in 0 to 90% weight ratio, to adjust the hydrophobic properties and ion selective nature. Extent of sulfonation was confirmed by 1H NMR and ion exchange capacity and degree of sulfonation depending on blending composition. These membranes were characterized as a function of weight fraction of SPEEK by recording ion-exchange capacity, water uptake, thermogravimetric analysis, membrane conductivity and membrane potential in equilibration with different electrolytic solutions. Membrane permselectivity and solute flux were estimated using these data on the basis of non-equilibrium thermodynamic principles and for observing the selectivity of different membranes for mono- or bivalent counter-ions. It was observed that relative selectivity for monovalent in comparison to bivalent counter-ions were increased with the decrease in SPEEK content in the composite membrane matrix. The range of SPEEK content in the blend from 60 to 80% appears the most suitable for the selective separation of monovalent ions from bivalent ions. Furthermore, highly charged nature and stabilities of these membranes extend their applications for the electro-assisted separations of similarly charged ions as well as other electro-membrane processes.     

Selective sensing and transport in bionic nanochannel based on macrocyclic host-guest chemistry

Imitating the signal transduction and transmembrane transport co ntrolled by biological channels in the cell membra ne,artificial nanochannels with a similar capability of sensing and transport are constructed as bionic nanochannels.To accomplish selective sensing and transport of biological analyte(as "guest"),the bionic nanochannels are modified with the artificial receptor(as "host"),Based on selective recognition between host and guest,bionic nanochannels translate the stimulus of the guest to electrochemical signal as sensors,and further regulate the transmission of guest as transporters.Howeve r,throughout all kinds of guests,the selective sensing and transpo rt of ions and chiral molecules is a challenging problem.And throughout all hosts of ions and chiral molecules,the macrocyclic hosts with multisite of recognition show better selectivity,such as crown ethers,cyclodextrins,calixarenes,and pillararenes.In this article,we highlight recent advances in the macrocyclic host-based nanochannels for the selective sensing and transport of ionic and chiral guests,summarize the similarities and differences of different kinds of macrocyclic host-based nanochannels,and expect the research direction and application prospect.     

Characterization of hydrated Na+(phenol) and K+(phenol) complexes using infrared spectroscopy

Hydrated alkali metal ion-phenol complexes were studied to model these species in aqueous solution for M=Na and K. IR predissociation spectroscopy in the O-H stretch region was used to analyze the structures of M+(Phenol)(H2O)n cluster ions, for n = 1-4. The onset of hydrogen bonding was observed to occur at n=4. Ab initio calculations were used to qualitatively explore the types of hydrogen-bonded structures of the M+(Phenol)(H2O)4 isomers. By combining the ab initio calculations and IR spectra, several different structures were identified for each metal ion. In contrast to benzene, detailed in a previous study of Na+(Benzene)n(H2O)m [J. Chem. Phys. 110, 8429 (1999)], phenol is able to bind directly to Na+ even in the presence of four waters. This is likely the result of the sigma-type interaction between the phenol oxygen and the ion. With K+, the dominant isomers are those in which the phenol O-H group is involved in a hydrogen bond with the water molecules, while with Na+, the dominant isomers are those in which the phenol O-H group is free and the water molecules are hydrogen-bonded to each other. Spectra and ab initio calculations for the M+(Phenol)Ar cluster ions for M=Na and K are reported to characterize the free phenol O-H stretch in the M+(Phenol) complex. While pi-type configurations were observed for binary M+(Phenol) complexes, sigma-type configurations appear to dominate the hydrated cluster ions.     

Two‐Dimensional Membranes: New Paradigms for High‐Performance Separation Membranes

Two‐dimensional (2D) materials with atomic thicknesses have aroused great interest as promising building blocks for the preparation of ultrathin 2D membranes. These 2D membranes can exhibit unprecedentedly high separation permeance owing to their ultrasmall membrane thicknesses and superior selectivity because of their size‐selective nanopores and/or nanochannels. Until now, a large number of 2D membranes with good performance have been reported, highlighting the potential of these novel membranes for efficient liquid and gas separations. Summarized in this review are the latest advances in 2D membranes, with a special focus on industrially attractive separation processes, fabrication methods of laminar membranes, choices of membrane materials, designs of membrane structures, and unique membrane transport properties. Opportunities and challenges of 2D membranes for commercial applications are also briefly discussed.     

Ultrafast hydration dynamics in the lipidic cubic phase: Discrete water structures in nanochannels

We report here our studies of hydration dynamics of confined water in aqueous nanochannels (approximately 50 A) of the lipidic cubic phase. By systematically anchoring the hydrocarbon tails of a series of tryptophan-alkyl ester probes into the lipid bilayer, we mapped out with femtosecond resolution the profile of water motions across the nanochannel. Three distinct time scales were observed, revealing discrete channel water structures. The interfacial water at the lipid surface is well-ordered, and the relaxation dynamics occurs in approximately 100-150 ps. These dynamically rigid water molecules are crucial for global structural stability of lipid bilayers and for stabilization of anchored biomolecules in membranes. The adjacent water layers near the lipid interface are hydrogen-bonded networks and the dynamical relaxation takes 10-15 ps. This quasi-bound water motion, similar to the typical protein surface hydration relaxation, facilitates conformation flexibility for biological recognition and function. The water near the channel center is bulklike, and the dynamics is ultrafast in less than 1 ps. These water molecules freely transport biomolecules near the channel center. The corresponding orientational relaxation at these three typical locations is well correlated with the hydration dynamics and local dynamic rigidity. These results reveal unique water structures and dynamical motions in nanoconfinements, which is critical to the understanding of nanoscopic biological activities and nanomaterial properties.     

Modification of the Surfaces of Polymer Films Irradiated by Heavy Ions and Nucleopore Nanofilters by XeF2 Vapors

The effect of xenon difluoride (XeF₂) vapors on the surface properties of the polymer films irradiated by heavy ions and of the nucleopore nanofilters produced from these films is studied. The procedure for modifying nucleopore membranes made of poly(ethylene terephthalate) and polyimide in XeF₂ vapors is developed. The hydrophilicity, electrosurface properties, and selectivity of modified membranes are investigated. It is shown that the water contact angle on the membrane surface decreases as a result of modification, and the extent of its change depends on the duration and temperature of membrane treatment. Electrokinetic measurements did not reveal any changes in the surface charge during the modification of the membranes prepared from poly(ethylene terephthalate), but their ion selectivity increased twofold. It is shown that the hydrodynamic diameter of the pores of modified membranes reversibly decreases with an increase in transmembrane pressure. The dislosed effects are explained by the presence of an elastoplastic gel-layer on the surfaces of the membrane and its pores. The gel-layer accumulates considerable surface and bulk charges and is characterized by the high hydraulic resistance hindering the convective ion transport.     

High‐Flux Membranes Based on the Covalent Organic Framework COF‐LZU1 for Selective Dye Separation by Nanofiltration

Covalent organic frameworks (COFs) are attractive candidates for advanced water‐treatment membranes owing to their high porosity and well‐organized channel structures. Herein, the continuous two‐dimensional imine‐linked COF‐LZU1 membrane with a thickness of only 400 nm was prepared on alumina tubes by in situ solvothermal synthesis. The membrane shows excellent water permeance (ca. 760 L m^?2 h^?1 MPa^?1) and favorable rejection rates exceeding 90 % for water‐soluble dyes larger than 1.2 nm. The water permeance through the COF‐LZU1 membrane is much higher than that of most membranes with similar rejection rates. Long‐time operation demonstrates the outstanding stability of the COF‐LZU1 membrane. As the membrane has no selectivity for hydrated salt ions (selectivity <12 %), it is also suitable for the purification of dye products from saline solutions. The excellent performance and the outstanding water stability render the COF‐LZU1 membrane an interesting system for water purification.     

Asymmetric bipolar membrane: A tool to improve product purity

Bipolar membranes (BPMs) are catalytic membranes for electro-membrane processes splitting water into protons and hydroxyl ions. To improve selectivity and current efficiency of BPMs, we prepare new asymmetric BPMs with reduced salt leakages. The flux of salt ions across a BPM is determined by the co-ion transport across the respective layer of the membrane. BPM asymmetry can be used to decrease the co-ion fluxes through the membrane and shows that the change of the layer thickness and charge density of the corresponding ion exchange layer determines the co-ion flux. The modification of a commercial BP-1 with a thin additional cation exchange layer on the cationic side results in a 47% lower salt leakage. Thicker layers result in water diffusion limitations. In order to avoid water diffusion limitations we prepared tailor made BPMs with thin anion exchange layers, to increase the water flux into the membrane. Therefore a BPM could be prepared with a thick cation exchange layer showing a 62% decreased salt ion leakage through the cationic side of the membrane.     

Reformulating the permselectivity-conductivity tradeoff relation in ion-exchange membranes

Polymer membranes used in separation applications exhibit a tradeoff between permeability and selectivity. That is, membranes that are highly permeable tend to have low selectivity and vice versa. For ion-exchange membranes used in applications such as electrodialysis and reverse electrodialysis, this tradeoff is expressed in terms of membrane permselectivity (i.e., ability to selectively permeate counter-ions over co-ions) and ionic conductivity (i.e., ability to transport ions in the presence of an electric field). The use of membrane permselectivity and ionic conductivity to illustrate a tradeoff between counter-ion throughput and counter-ion/co-ion selectivity in ion-exchange membranes complicates the analysis since permselectivity depends on the properties of the external solution and ionic conductivity depends on the transport of all mobile ions within a membrane. Furthermore, the use of these parameters restricts the analysis to ion-exchange membranes used in applications in which counter-ion/co-ion selectivity is required. In this study, the permselectivity-conductivity tradeoff relation for ion-exchange membranes is reformulated in terms of ion concentrations and diffusion coefficients in the membrane. The reformulated framework enables a direct comparison between counter-ion throughput and counter-ion/co-ion selectivity and is general. The generalizability of the reformulated tradeoff relation is demonstrated for cation-exchange membranes used in vanadium redox flow batteries.     

纳通道的物质传输特性及应用

近年来,随着材料科学、微纳加工技术和微纳尺度物质传输理论的发展,纳通道技术得到了越来越多的研究和关注。纳通道包括生物纳通道和人工纳通道,其孔径通常为1～100 nm。在这一尺度下,通道表面与通道内物质之间的作用概率大大增强,使得纳通道表现出许多与宏观体系不同的物质传输特性,例如通道表面电荷与通道内离子之间的静电作用产生了离子选择性,通道内电化学势的不对称分布产生了离子整流特性,物质传输过程中占据通道产生了阻塞脉冲特性等。纳通道中的这些物质传输特性在传感、分离、能源等领域具有广泛应用,例如通过对纳通道进行功能化修饰可以实现门控离子传输;利用亚纳米尺度的通道可以实现单分子传感;利用通道与传输物质之间的相互作用可以实现离子、分子、纳米粒子的分离;利用纳通道的离子选择性可以在通道内实现电荷分离,将不同形式的能量(如光、热、压力、盐差等)高效转化为电能。纳通道技术是化学、材料科学、纳米技术等多学科的交叉集合,在解决生物、环境、能源等基本问题方面具有良好的前景。该文综述了近10年来与纳通道物质传输理论以及纳通道技术应用相关的前沿研究,梳理了纳通道技术的发展过程,并对其在各个领域的应用进行了总结与展...     

Polymer evolution of a sulfonated polysulfone membrane as a function of ion beam irradiation fluence

Ion beam irradiation was used to modify the surface of a sulfonated polysulfone water treatment membrane. A beam of 25 keV H⁺ ions with three irradiation fluences (1 × 10¹³ ions/cm², 5 × 10¹³ ions/cm², and 1 × 10¹⁴ ions/cm²) was used for membrane irradiation. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) analyses were performed on the virgin and irradiated membranes in order to determine the changes to chemical structure incurred by ion beam irradiation. The results show that some of the sulphonic and CH bonds were broken and new CS bonds were formed after irradiation. Atomic force microscope (AFM) analyses show that membrane roughness decreased after irradiation. A significant increase in flux after ion beam irradiation was also observed, while the amount of cake accumulation on the membrane was decreased after ion beam irradiation. Hydrophobicity, pore size distribution and selectivity of the membrane were not affected by ion beam irradiation.     

Electrodialysis of Binary Electrolyte Mixtures with Membranes Modified by Organic Species

The modification of anion-exchange membranes MA-40 by lauric acid and sodium polystyrenesulfonate is studied. By measuring the wetting angle and using IR spectroscopy, the mechanism of sorption of the modifiers by the membranes is established. The membrane modification is accompanied by hydrophobization of a surface layer and the formation of strong bonds between functional groups of membranes and modifiers. The concentration dependence of the ion separation coefficients in electrodialysis of binary electrolyte mixtures with modified and nonmodified membranes is studied. The selectivity of modified membranes to less-hydrated ions increases and the smaller the solution concentration, the larger the ions.     

异质膜纳米通道的构建及其应用研究

从生物体离子通道中得到启发,研究人员开发了一系列仿生纳米通道,通过对内外表面的化学修饰,实现了在仿生纳米通道受限空间内离子转运的智能调控.目前的研究主要集中在均质膜方向,均质膜单一的结构和功能限制了其进一步发展,研发制备过程简单、稳定性好和功能多样的异质膜逐渐成为研究热点.与均质膜相比,异质膜被赋予单独使用均质膜时无法...