The Phosporylation of Aniline Derivatives in Biphase Systems

Aniline derivatives were phosphorylated in biphase systems using three methods. A comparative study was performed. The best results were obtained when a solid–liquid system was used. This method is the easiest and lead to higher yields (54–81%).     

Application of dispersive liquid–liquid microextraction for the determination of donepezil in urine by HPLC using a core–shell column

A rapid and novel method combining dispersive liquid–liquid microextraction and high-performance liquid chromatography coupled with fluorescence detection was developed for the determination of donepezil in human urine. Parameters affecting extraction efficiency and chromatographic determination, such as the type and volume of the extraction and disperser solvent, pH of sample for dispersive liquid–liquid microextraction, mobile-phase composition, pH, column oven temperature, and flow rate for chromatographic determination, were evaluated and optimized. Using a C₁₈ core–shell column (7.5 × 4.6?mm, 2.7?μm), the determination of donepezil was accomplished within 5?min. Under optimum conditions, developed method was linear in the range of 0.5–25?ng?mL^?1 with the correlation coefficient >0.99. Limit of detection was 0.15?ng?mL^?1. The relative standard deviation at three concentration levels (2, 12.5, and 20?ng?mL^?1) was less than 11% with accuracy in the range of 96.9–102.8%. The results of this study demonstrate that the use of dispersive liquid–liquid microextraction and core–shell column can be considered as a powerful tool for the analysis of donepezil in human urine.     

Complex of lysozyme and Myramistin: formation and adsorption at the water–xylene interface

1. Download : Download high-res image (127KB)
2. Download : Download full-size image

     

Conductive liquid crystalline compounds having a piperazine structure

New conductive thermotropic liquid crystalline materials having a piperazine ring in the central core: 1-[4-(9-decenyloxy)phenyl]-4-alkylpiperazines (6) were synthesized. The mesomorphic behaviours of these compounds and their conductivity in the liquid crystal phase were measured. The principal features of these compounds are to exhibit a smectic B phase around room temperature (for example 6: Cr 50 SmB 81 I, °C) and to exhibit a large dark current (6d: 430 μA cm^?2, applied voltage 20 V, at 70°C) in the smectic B phase.     

Determination of Phthalates in Milk by Ultrasound-Assisted Dispersive Liquid–Liquid Microextraction and Gas Chromatography–Mass Spectrometry

Ultrasound-assisted dispersive liquid–liquid microextraction was coupled with gas chromatography—mass spectrometry for the determination of phthalate esters in milk. Dimethyl phthalate, diethyl phthalate, dibutyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate, and dioctyl phthalate were analyzed in five brands of pasteurized Turkish milk. The efficiencies of the extraction procedure for the analytes were between 66 and 100%. The linear dynamic ranges of the calibration curves were from 0.025 to 1.000 µg/mL with correlation coefficients exceeding 0.99. The precision of the method is acceptable with relative standard deviation values below 5%. Dibutyl phthalate and bis(2-ethylhexyl) phthalate were commonly observed in milk.     

Determination of cannabinoids in plasma using salting-out-assisted liquid–liquid extraction followed by LC–MS/MS analysis

The detection of the markers of Cannabis consumption in biological specimens is an important task for drug testing laboratories in varous contexts. A simple assay combining salting-out assisted liquid–liquid extraction sample preparation and LC–MS/MS analysis was applied to the measurement of Δ⁹-tetrahydrocannabinol, 11-nor-9-carboxy-Δ⁹-tetrahydrocannabinol (THC-COOH), 11-hydroxy-Δ⁹-tetrahydrocannabinol, cannabinol and cannabidiol concentrations in 100 μl plasma specimens. The assay had linearity of 1–100 ng ml⁻¹ for THC-COOH and 0.5–50 ng ml⁻¹ for the other tested cannabinoids. Assay validation criteria were fulfilled. Extraction yields (88.7–97.3%) and internal-standard correct matrix effects (−9.6 to +5.4%) were acceptable. The assay was applied to 238 clinical specimens from trauma patients, with 19 samples presenting quantifiable concentrations of at least one of the target compounds. The developed assay is a simple and efficient strategy for simultaneous measurement of Δ⁹-tetrahydrocannabinol, THC-COOH, 11-hydroxy-Δ⁹-tetrahydrocannabinol, cannabinol and cannabidiol concentrations in plasma specimens.     

Preconcentration and determination of five antidepressants from human milk and urine samples by stir bar filled magnetic ionic liquids using liquid–liquid–liquid microextraction-high-performance liquid chromatography

A sensitive and straightforward liquid–liquid–liquid microextraction method was developed to preconcentrate and cleanup antidepressants, including mirtazapine, venlafaxine, escitalopram, fluoxetine, and fluvoxamine, from biological samples before analyzing with high-performance liquid chromatography. The essential novelty of this study is using magnetic ionic liquids as the extraction phase in the lumen of hollow fiber and preparing a liquid magnetic stir bar. In this method, polypropylene hollow fiber was utilized as the permeable membrane for the analyte extraction. Six magnetic ionic liquids consisting of the transition metal and rare earth compounds were synthesized and then hollow fiber lumen was injected as acceptor phase to extract the antidepressants. Besides, 3-pentanol as a water-immiscible solvent was impregnated in the hollow fiber wall pores. The effective factors in the method were optimized with the central composition design. The resultant calibration curves were linear over the concentration range of 0.8–400.0 ng mL⁻¹ (R² ≥ 0.996). The method displayed the proper detection limit (0.11–0.24 ng mL⁻¹), the reasonable limit of quantification (≤0.79 ng mL⁻¹), wide linear ranges, high preconcentration factors (≥294.3), and suitable relative standard deviation (2.31–5.47%) for measuring antidepressant medications. Analysis of human milk and urine samples showed acceptable recoveries of 96.5–103.8% with excellent relative standard deviations lower than 5.95%.     

Quality by Design enabled enhanced bioanalytical extraction and UFLC determination of vilazodone from rat serum

An ultrafast liquid chromatographic bioanalytical method was developed and validated for the determination of vilazodone in Wistar rat serum. Principles of quality by design were implemented for enhancing the bioanalytical liquid–liquid extraction of vilazodone from rat serum. A Box–Behnken design was utilized in the studies by selecting extraction time, centrifugation speed, and vortex time as the critical method variables for evaluating their effect on the analytical attribute, i.e., %recovery of vilazodone. Chromatographic separation was achieved within a run time of 10?min using a C-18 column and mobile phase comprising of methanol:phosphate buffer of pH 7 (85:15 v/v) flowing at 1.5?mL/min. Photodiode array detection was performed at 242?nm. Results of validation studies were satisfactory. The method was linear over a concentration of 100–2,000?ng/mL with acceptable accuracy and precision. Limits of detection and quantitation for the developed method were 50 and 100?ng/mL, respectively. This QbD-based approach was found suitable for routine bioanalysis of vilazodone in the biological matrix.     

Determination of Pesticide Residues in Fruit and Vegetables by High-Performance Liquid Chromatography–Tandem Mass Spectrometry with Multivariate Response Surface Methodology

Multivariate response surface methodology optimization using Placket–Burman and Box–Behnken designs were respectively used for the screening and optimization of significant factors for liquid chromatography–tandem mass spectrometry. Consequently, the optimized instrument successfully improved the sample preparation protocol and the method was validated. However, modified QuEChERS dispersive solid phase extraction coupled with ionic liquid-based dispersive liquid–liquid microextraction were used for the determination of multi-pesticide residues in fruit and vegetable samples. The analysed samples were jackfruit, strawberries, cucumber, pears, and carrots. The resulting linearity range (5–400?µg/kg) and regression coefficient (>0.99) results were satisfactory. The 94.2 and 95.8% accuracy (89–138%) and precision (0–25%) results were satisfactory and within the recommended ranges (≤20%) and (70–120%), respectively. The limits of detection (0.01–0.54?µg/kg) and quantitation (0.03–1.79?µg/kg) were excellent. The matrix effects (≤?87%) for all analysed samples were not significant. The estimated measurement uncertainties (≤27%) were within the acceptable range (≤50%). Justifiably, the response surface methodology optimized instrument and sample treatment techniques were reliable and convenient for multi-pesticide residue determination in various fruits and vegetables.     

The calculation of Cs and Rb conductivities in the region of liquid–plasma transition

The conductivity and thermal conductivity of Cs and Rb are calculated in the liquid phase and in the region between the plasma (gas) and the liquid states. The last area is located at the temperatures higher than the critical one, near the critical point. The Ziman formalism originated from the liquid metal theory was used for the calculations. The results of present calculations were compared with available experiments and calculations of other researchers. It was found that the liquid state formalism can be applied to expanded liquid Cs and Rb at densities higher than the critical one, but another type of models is necessary at lower densities.     

Simplified Determination of Organophosphorus Pesticides in Camellia Oil

A rapid, simple, and economical analytical approach has been developed and evaluated for the determination of six organophosphorus pesticides in camellia oil. This method is based on dispersive liquid?liquid microextraction (DLLME) following simple extraction. Oil was extracted with methanol by a high-speed blender and filtered with glass paper to remove fat. The filtrate was incorporated in the DLLME procedure. Acetonitrile was used as the dispersive solvent and chloroform as the extraction solvent. The residues were analyzed by gas chromatography–mass spectrometry. Under the optimized conditions, the recoveries were between 78.4 and 112.8% with relative standard deviations less than 12.3%. The limits of detection for the analytes were from 0.0003 to 0.0056?mg?·?kg^?1. The optimized method was used for the determination of organophosphorus pesticides in camellia oil.     

Integrated quality by design (QbD) and design of experiments (DoE) approach for UFLC determination of telaprevir in rat serum

An ultrafast liquid chromatographic bioanalytical method was developed and validated for the determination of telaprevir in Wistar albino rat serum. Principles of quality by design (QbD) were implemented for enhancing the bioanalytical liquid–liquid extraction of telaprevir from rat serum. A Box–Behnken design was utilized in the studies by selecting extraction time, centrifugation speed, and vortex time as the critical method variables for evaluating their effect on the critical analytical attribute, i.e., %recovery of telaprevir. Chromatographic separation was achieved within a run time of 10?min using a C-18 column and mobile phase comprising of methanol:borate buffer of pH 9 (90:10 v/v) flowing at 1.2?mL/min. Photodiode array detection was performed at 270?nm. Results of validation studies were satisfactory. The method was linear over a concentration of 25–10,000?ng/mL. Limit of detection for the developed method was 10?ng/mL. Further, design of experiments (DoE) used for inter-day accuracy and precision study suggested superior method reliability. This integrated QbD- and DoE-based approach ensured the development of a validated and reliable analytical method for optimum bioanalysis of telaprevir in biological matrix.     

Liquid crystalline properties of dissymmetric molecules IV. The substituent effect on thermal properties of nematic and smectic A phases in three aromatic ring systems with ester linkages

This paper describes the effect of substituent and ester linkage on smectic properties for some derivatives of 4-R -phenyl 4-(4-octyloxybenzoyloxy)benzoates (1), 4-octyloxyphenyl 4-(4-R-benzyloxy)benzoates (2), 4-(4-octyloxybenzoyloxy)phenyl 4- R -benzoates (3), and 4-R-phenyl 4-octyloxyphenyl terephthalates (4) where R = OCH₃, CH₃, OC₈H₁₇, C8H17, halogens, CF₃, OCF₃, CN, NO2, etc. The thermal properties are discussed in terms of the electrostatic nature of the substituents and the relative orientation of the ester groups with respect to both terminal substituents. The substituent effect on the layer structure of the smectic A phase is also examined by means of a small angle X-ray analysis.     

Determination of Alkylphenols in Water by Dispersive Liquid–Liquid Microextraction Based on Solid Formation without a Disperser

Dispersive liquid–liquid microextraction based on solid formation without a disperser combined with high-performance liquid chromatography has been developed for the determination of 4-tert-butylphenol, 4-n-nonylphenol, and 4-tert-octylphenol. This method is rapid, easy, and uses only 10 µL of a low toxicity organic solvent (1-hexadecanethiol) for the extraction solvent and no disperser solvent. The extraction time and centrifugation time require less than 10 min. The linear range was 1–500 ng mL^?1 for 4-tert-butylphenol, 2–1000 ng mL^?1 for 4-tert-octylphenol, and 5–500 ng mL^?1 for 4-n-nonylphenol with r² ≥ 0.9986. The detection limits were between 0.2 and 1.5 ng mL^?1. The recoveries of lake and river water samples were in the range of 79% to 108%, and the relative standard deviations were 5% to 10%.     

Liquid–liquid phase diagrams of H2O + 2-butanol + potassium phosphate and H2O + 2-butanol + Na2CO3 systems at 298.15 K

The phase diagrams for the ternary systems H₂O?+?2-butanol?+?K₂HPO₄/KH₂PO₄ (pH?=?7) and H₂O?+?2-butanol?+?Na₂CO₃ at 298.15?K were determined. Experimental binodals and tie lines for these systems are presented. The experimental results were correlated using an improved regular solution theory. The agreement between the correlation and experimental data is good.     

Dispersive Liquid–Liquid Microextraction for the Preconcentration of Multiple Classes of Pesticides in Water

A simple, rapid, efficient, and environmentally friendly method was developed for the preconcentration of atrazine, simazine, diuron, bentazone, tebuconazole, and fipronil from water. Dispersive liquid–liquid microextraction was employed with determination by liquid chromatography–tandem mass spectrometry. The volumes of extraction and disperser solvents, the concentration of sodium chloride, and the pH were optimized by response surface methodology. The optimum conditions involved the use of 150 µL of 1:1 (v/v) monochlorobenzene:dichlorobenzene as the extraction solvent, 2 mL acetonitrile as the disperser solvent, and 10 mL of sample at pH 3.0. The accuracy was evaluated in terms of recovery values that were from 54 to 112%. The relative standard deviations ranged from 4 to 27%. The limits of quantification were between 0.005 and 0.05 µg L^?1. The optimized method had low matrix effects for the analytes and the results demonstrated application for the determination of pesticides in water.     

Trace-level determination of eight cholesterol oxidation products in human plasma by dispersive liquid–liquid microextraction and ultra-performance liquid chromatography–tandem mass spectrometry

7α-Hydroxy cholesterol (7α-OHC), 25-hydroxy cholesterol (25-OHC), 27-hydroxy cholesterol (27-OHC), 4β-hydroxy cholesterol (4β-OHC), 7α-hydroxy-4-cholesten-3-one (7α-C4), 5β-cholestane-3α, 7α, 12α-triol (5β-Triol), cholic acid (CA), and chenodeoxycholic acid (CDCA) are known biomarkers of neurodegenerative diseases. A method for their simultaneous determination in human plasma has been optimized using dispersive liquid–liquid microextraction and ultra-performance liquid chromatography–tandem mass spectrometry. The limits of quantification of the target compounds were in the range of 0.3–3.3?µg/L. The precision achieved by this method was less than 13.4% for intraday and interday analyses. The proposed method was used to analyze eight cholesterol oxidation products in 30 human plasma samples. The analytical results were in a concentration range of 1.6–87.4?µg/L for 7α-OHC, 6.3–58.2?µg/L for 25-OHC, 12.1–98.5?µg/L for 27-OHC, 5.7–64.8?µg/L for 4β-OHC, 1.5–124.1?µg/L for 7α-C4, 0.5–16.5?µg/L for 5β-Triol, 13.1–245?µg/L for CA, and 19.6–487?µg/L for CDCA in the samples. The method may be used for the analysis of biomarkers of neurodegenerative diseases.     

Dispersive liquid–liquid microextraction followed by high-performance liquid chromatography for the determination of three carbamate pesticides in water samples

A simple, rapid and efficient method, dispersive liquid–liquid microextraction (DLLME) in conjunction with high-performance liquid chromatography (HPLC), has been developed for the determination of three carbamate pesticides (methomyl, carbofuran and carbaryl) in water samples. In this extraction process, a mixture of 35 µL chlorobenzene (extraction solvent) and 1.0 mL acetonitrile (disperser solvent) was rapidly injected into the 5.0 mL aqueous sample containing the analytes. After centrifuging (5 min at 4000 rpm), the fine droplets of chlorobenzene were sedimented in the bottom of the conical test tube. Sedimented phase (20 µL) was injected into the HPLC for analysis. Some important parameters, such as kind and volume of extraction and disperser solvent, extraction time and salt addition were investigated and optimised. Under the optimum extraction condition, the enrichment factors and extraction recoveries ranged from 148% to 189% and 74.2% to 94.4%, respectively. The methods yielded a linear range in the concentration from 1 to 1000 µg L^?1 for carbofuran and carbaryl, 5 to 1000 µg L^?1 for methomyl, and the limits of detection were 0.5, 0.9 and 0.1 µg L^?1, respectively. The relative standard deviations (RSD) for the extraction of 500 µg L^?1 carbamate pesticides were in the range of 1.8–4.6% (n = 6). This method could be successfully applied for the determination of carbamate pesticides in tap water, river water and rain water.     

Simultaneous Determination of Fluoxetine,Estrone, Pesticides,and Endocrine Disruptors in Wastewater by Gas Chromatography–Mass Spectrometry (GC–MS) Following Switchable Solvent–Liquid Phase Microextraction (SS–LPME)

A simple and sensitive analytical method for the determination of fluoxetine, estrone and selected pesticides and endocrine disruptors has been proposed for wastewater analysis by gas chromatography–mass spectrometry (GC–MS). A switchable solvent was produced with N,N-dimethylbenzylamine by changing its hydrophobic properties by the addition of CO₂ for protonation. Sodium hydroxide was added to switch the solubility of the extraction solvent and to allow phase separation in the sample/standard medium. Analytical parameters affecting the extraction outputs such as volume of switchable solvent, concentration and volume of sodium hydroxide, mixing type and period were investigated to improve the extraction recovery of the selected analytes. Under the optimum conditions, limits of detection and limits of quantification for the analytes were calculated in the ranges of 0.16–8.6?ng mL^?1 and 0.54–29?ng mL^?1, respectively. The developed method was successfully applied to synthetic wastewater and two municipal wastewater samples. None of the selected analytes were detected in the samples. High recovery values demonstrated that the proposed method was reliable and applicable to complex matrices.