Engineering Active Sites of Polyaniline for AlCl2+ Storage in an Aluminum‐Ion Battery

The reversible capacity of AlCl₄^? intercalation/de‐intercalation in conventional cathodes of aluminum‐ion batteries (AIBs) is difficult to improve due to the large size of AlCl₄^? anions. Therefore, it is highly desirable to realize the intercalation/de‐intercalation of smaller Al‐based ions. Here, we fabricated polyaniline/single‐walled carbon nanotubes (PANI/SWCNTs) composite films and protonated the PANI nanorods. The protonation endows PANI with more active sites and enhanced conductivity. Hyper self‐protonated PANI (PANI(H⁺)) exhibits reversible AlCl₂⁺ intercalation/de‐intercalation during the discharge/charge process. As a result, the discharge capacity of the Al/PANI(H⁺) battery is twice as high as that of the initial composite films. PANI(H⁺)@SWCNT electrodes also have a stable cycling life with only 0.003 % capacity decay per cycle over 8000 cycles. Owing to the excellent mechanical properties, PANI(H⁺)@SWCNT composite films can act as the electrodes of flexible AIBs.     

Reversible Ammonium Ion Intercalation/de-intercalation with Crystal Water Promotion Effect in Layered VOPO4⋅2 H2O**

The non-metal NH₄⁺ carrier has attracted tremendous interests for aqueous energy storage owing to its light molar mass and fast diffusion in aqueous electrolytes. Previous study inferred that NH₄⁺ ion storage in layered VOPO₄⋅2 H₂O is impossible due to the removal of NH₄⁺ from NH₄VOPO₄ leads to a phase change inevitably. Herein, we update this cognition and demonstrated highly reversible intercalation/de-intercalation behavior of NH₄⁺ in layered VOPO₄⋅2 H₂O host. Satisfactory specific capacity of 154.6 mAh g⁻¹ at 0.1 A g⁻¹ and very stable discharge potential plateau at 0.4 V based on reference electrode was achieved in VOPO₄⋅2 H₂O. A rocking-chair ammonium-ion full cell with the VOPO₄⋅2 H₂O//2.0 M NH₄OTf//PTCDI configuration exhibited a specific capacity of 55 mAh g⁻¹, an average operating voltage of about 1.0 V and excellent long-term cycling stability over 500 cycles with a coulombic efficiency of ≈99 %. Theoretical DFT calculations suggest a unique crystal water substitution process by ammonium ion during the intercalation process. Our results provide new insight into the intercalation/de-intercalation of NH₄⁺ ions in layered hydrated phosphates through crystal water enhancement effect.     

Phenoxazine Polymer-based p-type Positive Electrode for Aluminum-ion Batteries with Ultra-long Cycle Life

Aluminum-ion batteries (AIBs) are a promising candidate for large-scale energy storage due to the abundant reserves, low cost, good safety, and high theoretical capacity of Al. However, AIBs with inorganic positive electrodes still suffer from sluggish kinetics and structural collapse upon cycling. Herein, we propose a novel p-type poly(vinylbenzyl-N-phenoxazine) (PVBPX) positive electrode for AIBs. The dual active sites enable PVBPX to deliver a high capacity of 133 mAh g⁻¹ at 0.2 A g⁻¹. More impressively, the expanded π-conjugated construction, insolubility, and anionic redox chemistry without bond rearrangement of PVBPX for AIBs contribute to an amazing ultra-long lifetime of 50000 cycles. The charge storage mechanism is that the AlCl₄⁻ ions can reversibly coordinate/dissociate with the N and O sites in PVBPX sequentially, which is evidenced by both experimental and theoretical results. These findings establish a foundation to advance organic AIBs for large-scale energy storage.     

Electrochemical Performance of Graphitic Multi-walled Carbon Nanotubes with Different Aspect Ratios as Cathode Materials for Aluminum-ion Batteries

Graphitic multi-walled carbon nanotubes (MWCNTs) can function as high-performance cathode materials for rechargeable Al-ion batteries with well-defined discharging plateaus and reasonable charge/discharge C-rates. However, the main intercalation/deintercalation or adsorption/desorption path of AlCl₄⁻ anions into or onto G-MWCNTs has not been elucidated. Herein, we used battery cells comprised of G-MWCNTs with different aspect ratios, Al metal, and AlCl₃/1-ethyl-3-methylimidazolium chloride ionic liquid as the cathode, anode, and electrolyte, respectively. The electrochemical performance of the Al||G-MWCNT cell increased as the aspect ratio of the G-MWCNT cathode increased (i. e., longer and thinner). The degree of defects of the G-MWCNTs was similar (0.15–0.22); hence, the results confirm that the main and alternate paths for the AlCl₄⁻ intercalation/de-intercalation or adsorption/desorption into/from or onto/from the G-MWCNT are the basal and edge planes, respectively. The step-like structures of defects on the basal plane provide the main reaction site for AlCl₄⁻ anions.     

Electrochemically Surface-modified Aluminum Electrode Enabling High Performance and Ultra-long Cycling Life Al-ion Batteries

Innovation in electronic devices has created a demand for energy storage systems. Recently, rechargeable Al-ion batteries (AIBs) have received significant attention owing to their high gravimetric capacity and low cost. In this study, the electrochemical performances of pristine, etched, and electropolished Al negative electrodes via surface modification were investigated to determine their efficiency in AIBs. Herein, pristine, etched, and electropolished Al acted as the negative electrodes (anodes), and pure graphite and aluminum chloride (AlCl₃)/1-ethyl-3-methylimidazolium chloride ([EMIm]Cl) were used as the positive electrode (cathode) and ionic liquid electrolyte, respectively. This new type of electropolished Al-based battery cell shows good cyclability and high performance compared to pristine and etched Al electrodes. The electropolished Al electrode stabilized at an average capacity of 50 mAh g⁻¹ over 10,000 cycles at an ultrafast current rate of 5,000 mA g⁻¹.     

Proton Intercalation/De-Intercalation Dynamics in Vanadium Oxides for Aqueous Aluminum Electrochemical Cells

Understanding cation (H⁺, Li⁺, Na⁺, Al³⁺, etc.) intercalation/de-intercalation chemistry in transition metal compounds is crucial for the design of cathode materials in aqueous electrochemical cells. Here we report that orthorhombic vanadium oxides (V₂O₅) supports highly reversible proton intercalation/de-intercalation reactions in aqueous media, enabling aluminum electrochemical cells with extended cycle life. Empirical analyses using vibrational and x-ray spectroscopy are complemented with theoretical analysis of the electrostatic potential to establish how and why protons intercalate in V₂O₅ in aqueous media. We show further that cathode coatings composed of cation selective membranes provide a straightforward method for enhancing cathode reversibility by preventing anion cross-over in aqueous electrolytes. Our work sheds light on the design of cation transport requirements for high-energy reversible cathodes in aqueous electrochemical cells.     

Electrochemically Driven Transformation of Amorphous Carbons to Crystalline Graphite Nanoflakes: A Facile and Mild Graphitization Method

Although, in the carbon family, graphite is the most thermodynamically stable allotrope, conversion of other carbon allotropes, even amorphous carbons, into graphite is extremely hard. We report a simple electrochemical route for the graphitization of amorphous carbons through cathodic polarization in molten CaCl₂ at temperatures of about 1100 K, which generates porous graphite comprising petaloid nanoflakes. This nanostructured graphite allows fast and reversible intercalation/deintercalation of anions, promising a superior cathode material for batteries. In a Pyr₁₄TFSI ionic liquid, it exhibits a specific discharge capacity of 65 and 116 mAh g⁻¹ at a rate of 1800 mA g⁻¹ when charged to 5.0 and 5.25 V vs. Li/Li⁺, respectively. The capacity remains fairly stable during cycling and decreases by only about 8 % when the charge/discharge rate is increased to 10000 mA g⁻¹ during cycling between 2.25 and 5.0 V.     

Tuning the layer structure of molybdenum trioxide towards high-performance aqueous zinc-ion batteries

Aqueous zinc-ion batteries (ZIBs) have attracted significant attentions because of low cost and high reliability. However, conventional ZIBs are severely limited by the development of high energy density cathode materials with reversible Zn²⁺ insertion/extraction. Herein, a conducting polymer intercalated MoO₃ (PMO) with extensively extended interlayer spacing is developed as a high-performance ZIBs cathode material. The interlayer spacing of PMO is prominently increased which results in an improved Zn²⁺ mobility during charge and discharge process. More significantly, the electrochemical results reveals that the intercalation of PANI facilitates the charge storage and reinforces the layered structure of MoO₃, leading to a high capacity and good cycling stability. DFT calculation further reveals the intercalation of PANI into MoO₃ significantly lower Zn²⁺ diffusion barrier. Benefit from these advantages, the ZIBs based on PMO electrode delivers a considerable capacity of 157 mAh/g at 0.5 A/g and ameliorative stability with 63.4% capacity retention after 1000 cycles.     

Proton-Reservoir Hydrogel Electrolyte for Long-Term Cycling Zn/PANI Batteries in Wide Temperature Range

Advanced aqueous batteries are promising for next generation flexible devices owing to the high safety, yet still requiring better cycling stability and high capacities in wide temperature range. Herein, a polymeric acid hydrogel electrolyte (PAGE) with 3 M Zn(ClO₄)₂ was fabricated for high performance Zn/polyaniline (PANI) batteries. With PAGE, even at −35 °C the Zn/Zn symmetrical battery can keep stable for more than 1 500 h under 2 mA cm⁻², and the Zn/PANI battery can provide ultra-high stable specific capacity of 79.6 mAh g⁻¹ for more than 70 000 cycles at 15 A g⁻¹. This can be mainly ascribed to the −SO₃⁻H⁺ function group in PAGE. It can generate constant protons and guide the (002) plane formation to accelerate the PANI redox reaction kinetics, increase the specific capacity, and suppress the side reaction and dendrites. This proton-supplying strategy by polymeric acid hydrogel may further propel the development of high performance aqueous batteries.     

Nb2O5 nanobelts: A lithium intercalation host with large capacity and high rate capability

In this study, Nb₂O₅ nanobelts, with a ca. ∼15 nm in thickness, ca. ∼60 nm in width and several tens of mircrometers in length, have first been used as the electrode material for lithium intercalation over the potential window of 3.0–1.2 V (vs. Li⁺/Li). It delivers an initial intercalation capacity of 250 mA hg⁻¹ at 0.1 Ag⁻¹ current density, corresponding to x = 2.5 for L_xNb₂O₅, and can still keep relative stable and reaches as large as 180 mA hg⁻¹ after 50 cycles. Surprisingly, the electrodes composed of Nb₂O₅ nanobelts can work smoothly even at high current density of 10 Ag⁻¹, and shows higher specific capacity and excellent cycling stable, as well as sloped feature in voltage profile. Cycling test indicates Nb₂O₅ nanobelts electrode shows a high reversible charge/discharge capacity, high rate capability with excellent cycling stability.     

Hybrid Superlattice-Triggered Selective Proton Grotthuss Intercalation in δ-MnO2 for High-Performance Zinc-Ion Battery

A great deal of attention has been paid on layered manganese dioxide (δ−MnO₂) as promising cathode candidate for aqueous zinc-ion battery (ZIB) due to the excellent theoretical capacity, high working voltage and Zn²⁺/H⁺ co-intercalation mechanism. However, caused by the insertion of Zn²⁺, the strong coulomb interaction and sluggish diffusion kinetics have resulted in significant structure deformation, insufficient cycle stability and limited rate capability. And it is still far from satisfactory to accurately modulate H⁺ intercalation for superior electrochemical kinetics. Herein, the terrace-shape δ−MnO₂ hybrid superlattice by polyvinylpyrrolidone (PVP) pre-intercalation (PVP−MnO₂) was proposed with the state-of-the-art ZIBs performance. Local atomic structure characterization and theoretical calculations have been pioneering in confirming the hybrid superlattice-triggered synergy of electron entropy stimulation and selective H⁺ Grotthuss intercalation. Accordingly, PVP−MnO₂ hybrid superlattice exhibits prominent specific capacity (317.2 mAh g⁻¹ at 0.125 A g⁻¹), significant rate performance (106.1 mAh g⁻¹ at 12.5 A g⁻¹), and remarkable cycle stability at high rate (≈100 % capacity retention after 20,000 cycles at 10 A g⁻¹). Therefore, rational design of interlayer configuration paves the pathways to the development of MnO₂ superlattice for advanced Zn−MnO₂ batteries.     

Electrochemical lithium and sodium insertion studies in 3D metal oxy-phosphate framework MoWO3(PO4)2 for battery applications

A new type of three-dimensional (3D) oxy-phosphate materials are explored for the application of Li and Na batteries. The molybdenum tungsten oxy phosphate, MoWO₃(PO₄)₂, was synthesized by solid-state method and evaluated for Li/Na insertion/de-insertion electrode material for the first time. The cell at charged state (vs. Li⁺/Li) showed a discharge capacity of 786 mAh g⁻¹ within the voltage window of 0.3 V with amorphization of crystalline MoWO₃(PO₄)₂ as observed from ex-situ powder XRD analysis. The structural integrity was revealed in this material, even with nearly more than 5 Li⁺ ions into the lattice, leading to the discharge capacity of 250 mAh g⁻¹. The reversible charge/discharge behavior with insertion/de-insertion of 2.4 Li⁺ ions in the voltage range of 1.65 − 3.5 V resulted in 110 and 95 mAh g⁻¹ at C/10 and C/5 rates, respectively. On the other hand, poor cycling performance was noticed for Na ion insertion and desertion, with a discharge capacity of 250 mAh/g within the voltage range of 0.3 − 3.5 V (vs. Na⁺/Na).

     

Electrochemical and in-situ X-ray diffraction studies of Ti3C2Tx MXene in ionic liquid electrolyte

2D titanium carbide (Ti₃C₂T_x MXene) showed good capacitance in both organic and neat ionic liquid electrolytes, but its charge storage mechanism is still not fully understood. Here, electrochemical characteristics of Ti₃C₂T_x electrode were studied in neat EMI-TFSI electrolyte. A capacitive behavior was observed within a large electrochemical potential range (from − 1.5 to 1.5 V vs. Ag). Intercalation and de-intercalation of EMI⁺ cations and/or TFSI⁻ anions were investigated by in-situ X-ray diffraction. Interlayer spacing of Ti₃C₂T_x flakes decreases during positive polarization, which can be ascribed to either electrostatic attraction effect between intercalated TFSI⁻ anions and positively charged Ti₃C₂T_x nanosheets or steric effect caused by de-intercalation of EMI⁺ cations. The expansion of interlayer spacing when polarized to negative potentials is explained by steric effect of cation intercalation.     

Self-Adaptive Re-Organization Enables Polythiophene as an Extraordinary Cathode Material for Aluminum-Ion Batteries with a Cycle Life of 100 000 Cycles

Aluminum-ion batteries (AIBs) have attracted great attentions in recent years. Organic materials such as polythiophene (PT) are promising cathode for AIBs. However, the capacity and cyclic stability of conventional organic cathode such as PT are limited by the inadequate degree of reaction and the unstable nature of organic materials. To obtain high-performance organic cathode, a new PT with the ability of self-adaptive re-organization was prepared. During cycling, its molecular chain can be re-organized, and the polymerization mode will change from C_α−C_α (α-PT) to C_β−C_β (β-PT). This change leads to smaller steric hindrance and faster kinetics during ion insertion which can lower the reaction energy barrier and stabilize the molecular structure. Benefited by this, AIBs with this cathode can deliver a specific capacity of 180 mAh g⁻¹ (@2 A g⁻¹) and a superb stability of 100 000 cycles at 10 A g⁻¹. High energy density and power density can also be achieved with this cathode.     

Layer-By-Layer (LBL) hybrid MOF coating for graphene-based multilayer composite: Synthesis and application as anode for lithium ion batteries

The hybrid anodic materials with high porosity and low charge resistance exhibit high specific capacity and stable cyclic stability for lithium ion battery (LIBs). For this purpose, three-dimensional hollow material, metal organic framework (MOF-199) was coated over the active surface of oxidized derivative of graphene (Graphene oxide, GO), via layer-by-layer (LBL) coating method. Cupric acetate and benzene-1,3,5-tricarboxylic acid [Cu₃(BTC)₂], were alternatively coated on the active surface of GO as an anode material, to enhance the structural diversity and reduce the synergistic effect of insertion and extraction of Li⁺ ions for LIBs. Sharp absorption peaks from 1620 cm⁻¹ to 1360 cm⁻¹ and intense ring bends ∼1000 cm⁻¹ was identified through FTIR. Powder XRD provides the evidence for size reduction of Cu₃(BTC)₂@GO composite (32.6 nm) comparative to GO (43.7 nm). Outcome of EIS analysis shows the charge transfer resistance of simple GO is 2410 Ω, which is 4 times higher than R_ct of Cu₃(BTC)₂@GO composite (590 Ω). Similarly the Warburg impedance co-efficient for simple GO (448.8 Ωs^−1/2) is also higher than A_w of Cu₃(BTC)₂@GO composite (77.64 Ωs^−1/2). The synthesized material show high initial charge/discharge capacity, 1200/1420 mAh/g with 85% Coulombic efficiency and reversible discharge capacity, 1296 mAh/g after 100 cycles at 100 mA/g current density. The 98.9% Coulombic efficiency and 91% retaining capacity of composite at 100th cycle with cyclic stability, provides the phenomenon approach towards the rechargeable LIBs for industrial technology.     

β-MnO2/Metal–Organic Framework Derived Nanoporous ZnMn2O4 Nanorods as Lithium-Ion Battery Anodes with Superior Lithium-Storage Performance

Nanoporous ZnMn₂O₄ nanorods have been successfully synthesized by calcining β-MnO₂/ZIF-8 precursors (ZIF-8 is a type of metal–organic framework). If measured as an anode material for lithium-ion batteries, the ZnMn₂O₄ nanorods exhibit an initial discharge capacity of 1792 mA h g⁻¹ at 200 mA g⁻¹, and an excellent reversible capacity of 1399.8 mA h g⁻¹ after 150 cycles (78.1 % retention of the initial discharge capacity). Even at 1000 mA g⁻¹, the reversible capacity is still as high as 998.7 mA h g⁻¹ after 300 cycles. The remarkable lithium-storage performance is attributed to the one-dimensional nanoporous structure. The nanoporous architecture not only allows more lithium ions to be stored, which provides additional interfacial lithium-storage capacity, but also buffers the volume changes, to a certain degree, during the Li⁺ insertion/extraction process. The results demonstrate that nanoporous ZnMn₂O₄ nanorods with superior lithium-storage performance have the potential to be candidates for commercial anode materials in lithium-ion batteries.     

Self-Assembled FeSe2 Microspheres with High-Rate Capability and Long-Term Stability as Anode Material for Sodium- and Potassium-Ion Batteries

Sodium- and potassium-ion batteries have attracted intensive attention recently as low-cost alternatives to lithium-ion batteries with naturally abundant resources. However, the large ionic radii of Na⁺ and K⁺ render their slow mobility, leading to sluggish diffusion in host materials. Herein, hierarchical FeSe₂ microspheres assembled by closely packed nano/microrods are rationally designed and synthesized through a facile solvothermal method. Without carbonaceous material incorporation, the electrode delivers a reversible Na⁺ storage capacity of 559 mA h g⁻¹ at a current rate of 0.1 A g⁻¹ and a remarkable rate performance with a capacity of 525 mA h g⁻¹ at 20 A g⁻¹. As for K⁺ storage, the FeSe₂ anode delivers a high reversible capacity of 393 mA h g⁻¹ at 0.4 A g⁻¹. Even at a high current rate of 5 A g⁻¹, a discharge capacity of 322 mA h g⁻¹ can be achieved, which is among the best high-rate anodes for K⁺ storage. The excellent electrochemical performance can be attributed to the favorable morphological structure and the use of an ether-based electrolyte during cycling. Moreover, quantitative study suggests a strong pseudocapacitive contribution, which boosts fast kinetics and interfacial storage.     

Electrochemical polymerization of polyaniline doped with Zn2+ as the electrode material for electrochemical supercapacitors

Polyaniline doped with Zn²⁺ (PANI/Zn²⁺) films was synthesized by cyclic voltammetric method on stainless steel mesh substrates in 0.2 mol L^?1 aniline and 0.5 mol L^?1 sulfuric acid electrolyte with various concentrations of zinc sulfate (ZnSO₄·7H₂O). The structure and morphology of PANI and PANI/Zn²⁺ films were characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy techniques, respectively. The electrochemical properties of PANI and PANI/Zn²⁺ films were investigated by cyclic voltammetry, galvanostatic charge–discharge test, and electrochemical impedance spectroscopy in 0.5 mol L^?1 H₂SO₄ electrolyte in a three-electrode system. The results show that the surface morphology of PANI/Zn²⁺ is more rough than that of pure PANI. The specific capacitance of the PANI/Zn²⁺ film displays a larger specific capacitance of 738 F g^?1, lower resistance, and better stability as compared with the pure PANI film. Thus, good capacitive performance demonstrates its potential superiority for supercapacitors.     

In situ X‐ray Diffraction Studies of Cation and Anion Inter­calation into Graphitic Carbons for Electrochemical Energy Storage Applications

Graphite is a redox‐amphoteric intercalation host and thus capable to incorporate various types of cations and anions between its planar graphene sheets to form so‐called donor‐type or acceptor‐type graphite intercalation compounds (GICs) by electrochemical intercalation at specific potentials. While the LiC_x/C_x donor‐type redox couple is the major active compound for state‐of‐the‐art negative electrodes in lithium‐ion batteries, acceptor‐type GICs were proposed for positive electrodes in the “dual‐ion” and “dual‐graphite” cell, another type of electrochemical energy storage system. In this contribution, we analyze the electrochemical intercalation of different anions, such as bis(trifluoromethanesulfonyl) imide or hexafluorophosphate, into graphitic carbons by means of in situ X‐ray diffraction (XRD). In general, the characterization of battery electrode materials by in situ XRD is an important technique to study structural and compositional changes upon insertion and de‐insertion processes during charge/discharge cycling. We discuss anion (X^–) and cation (M⁺) intercalation/de‐intercalation into graphites on a comparative basis with respect to the M_x⁺C_n^– and C_n⁺X_n^– stoichiometry, discharge capacity, the intercalant gallery height/gallery expansion and the M–M or X–X in‐plane distances.