Green bio‐based synthesis of Fe2O3@SiO2‐IL/Ag hollow spheres and their catalytic utility for ultrasonic‐assisted synthesis of propargylamines and benzo[b]furans

A novel magnetic hybrid system containing nano‐magnetic Fe₂O₃ hollow spheres, silica shell, [pmim]Cl ionic liquid and silver nanoparticles was synthesized and characterized. The silver nanoparticles were prepared via biosynthesis using Achillea millefolium flower as reducing and stabilizing agent. The hybrid system was successfully used as an efficient and reusable catalyst for promoting green ultrasonic‐assisted A³ and KA² coupling reactions as well as benzo[b]furan synthesis. It was found that decoration of the magnetic core with non‐magnetic moieties decreased the maximum saturation magnetization. However, the catalyst was still superparamagnetic and could be simply separated from the reaction mixture using an external magnet. The heterogeneous nature of the catalyst was also confirmed by studying its reusability and stability and the leaching of silver. Use of aqueous media, high yields, short reaction times, broad substrate tolerance and low required amount of catalyst are the merits of this protocol.     

Caffeine gold complex supported on magnetic nanoparticles as a green and high turnover frequency catalyst for room temperature A3 coupling reaction in water

A new heterogeneous catalyst derived from gold (III) and supported on caffeine‐coated magnetic nanoparticles, Fe₃O₄@Caff‐Au, has been prepared and characterized using different techniques. This magnetic gold composite shows high catalytic activity in A³ coupling reactions of terminal alkynes, aldehydes and secondary amines. Using this green catalyst, propargylamines are obtained in high turnover frequency in short reaction times using water as solvent at room temperature. This stable and ready accessible catalyst can be easily recycled magnetically for at least nine consecutive runs without significant loss of activity and with slight aggregation of Au species.     

Nano n‐propylsulfonated γ‐Al2O3: a new,efficient and reusable catalyst for synthesis of spiro[indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media

Nano n‐propylsulfonated γ‐Al₂O₃ is easily prepared by the reaction of nano γ‐Al₂O₃ with 1,3‐propanesultone. This reagent can be used as an efficient catalyst for the synthesis of spiro [indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media. This new method consistently has the advantages of excellent yields and short reaction times. Further, the catalyst can be reused and recovered several times. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel ionic liquid supported on Fe3O4 nanoparticles as an efficient catalyst for the synthesis of new chromenes

An efficient procedure for the synthesis of new chromenes by the multicomponent reaction of aldehydes, 4‐hydroxycoumarin and 2‐hydroxynaphthalene‐1,4‐dione in the presence of an ionic liquid supported on Fe₃O₄ nanoparticles is described. The ionic liquid supported on Fe₃O₄ nanoparticles as a magnetic catalyst gives products in high yields. Significant features of this method are: short reaction times, excellent yields, green method and use of an effective catalyst that can be recovered and reused many times without loss of its catalytic activity.     

Preparation of Ag‐doped g‐C3N4 Nano Sheet Decorated Magnetic γ‐Fe2O3@SiO2 Core–Shell Hollow Spheres through a Novel Hydrothermal Procedure: Investigation of the Catalytic activity for A3, KA2 Coupling Reactions and [3 + 2] Cycloaddition

Taking advantageous of both g‐C₃N₄ and magnetic core‐shell hollow spheres, for the first time a heterogeneous and magnetically separable hybrid system was prepared through a novel and simple hydrothermal procedure and used for immobilization of bio‐synthesized Ag(0) nanoparticles. The hybrid system was fully characterized by using SEM/EDS, FTIR, VSM, TEM, XRD, TGA, DTGA, ICP‐AES, BET and elemental mapping analysis. The catalytic utility of the obtained system, h‐Fe₂O₃@SiO₂/g‐C₃N₄/Ag, for promoting ultrasonic‐assisted A³, KA² coupling reactions and [3 + 2] cycloaddition has been confirmed. The results established that the catalyst could efficiently catalyze the reaction to afford the corresponding products in high yields in short reaction times. The reusability study confirmed that the catalyst could be recovered and reused for at least five reaction runs with only slight loss of the catalytic activity. The hot filtration test also proved low silver leaching, indicating the heterogeneous nature of the catalysis.     

Sulfonated palladium(II) N‐heterocyclic carbene complex immobilized on nano–micro size poly(4‐vinylpyridinium chloride) for Suzuki‐Miyaura cross‐coupling reaction

The sulfonated palladium(II) N‐heterocyclic carbene complex Pd^II(NHC)SO₃^?, supported on poly(4‐vinylpyridinium chloride), was used as a heterogeneous, recyclable and active catalyst for the Suzuki–Miyaura reaction. This catalyst was applied for coupling of various aryl halides with phenylboronic acid and the corresponding products were obtained in excellent yields and short reaction times. The catalyst was characterized using Fourier transform infrared and diffuse reflectance UV–visible spectroscopies, scanning electron microscopy and elemental analysis. After each reaction, the catalyst was recovered easily by simple filtration and reused several times without significant loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

HAp‐encapsulated γ‐Fe2O3‐supported dual acidic heterogeneous catalyst for highly efficient one‐pot synthesis of benzoxanthenones and 3‐pyranylindoles

A novel method is reported for the synthesis of benzoxanthenone and 3‐pyranylindole derivatives via one‐pot three‐component reactions using a newly synthesized HAp‐encapsulated γ‐Fe₂O₃‐supported dual acidic heterogeneous catalyst, as a reusable and highly efficient nanocatalyst. In this protocol the use of the nanocatalyst provided a green, useful and rapid method to generate products in short reaction times (4–20 min) and in excellent yields (87–96%). The paramagnetic nature of the catalyst provided a simple, trouble‐free and facile approach for the separation of the catalyst by applying an external magnet, and it could be used in eight cycles without significant loss in catalytic efficiency.     

CoNiFe2O4@Silica-SO3H nanoparticles: New recyclable magnetic nanocatalyst for the one-pot synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones under solvent-free conditions

A useful and green synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones derivatives were achieved by one-pot cyclocondensation between substituted aryl aldehydes, diketone/ketoester, and urea/thiourea using magnetic CoNiFe₂O₄@Silica-SO₃H nanoparticles under solvent-free condition. The choice of this approach showed essential advantages such as short reaction time, simple work-up procedure, high activity of the catalyst, high yield of the reaction products, the magnetic properties of the catalyst, and environmentally amiable conditions. In addition, the catalyst recovered and reused four times without notable loss of its activity. The magnetic CoNiFe₂O₄@Silica-SO₃H nanoparticles were described by Fourier-transform infrared spectroscopy (FT-IR), field emission scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction spectroscopy, and vibrating sample magnetometer. The products were obtained with excellent yields (88–98%). The formation of the products was confirmed and identified with their physical properties (melting points), the FT-IR, ¹H NMR, ¹³C NMR, mass spectrometry, and the elemental analysis.     

A Green and Novel Method of Synthesizing 2,2'-Arylmethylene Bis(3-hydroxy-5,5-dimethylcyclohex-2-enone) Catalyzed by L-Histidine in Ionic Liquid

An efficient and green approach to the synthesis of 2,2′‐arylmethylene bis(3‐hydroxy‐5,5‐dimethylcyclohex‐2‐enone) using L‐histidine as the catalyst is described. In addition, room temperature ionic liquid 1‐butyl‐3‐methylimidazonium tetrafluoroborate [bmim]BF₄ was used as green recyclable alternatives to volatile organic solvents for this condensation reaction. This green catalytic system can be recycled several times with no decreases in yields and reaction rates.     

Synthesis of magnetically recyclable Fe3O4@[(EtO)3Si–L1H]/Pd(II) nanocatalyst and application in Suzuki and Heck coupling reactions

A Pd(II) Schiff base complex as an efficient and highly heterogeneous catalyst was developed by immobilization of a palladium complex on the surface of modified Fe₃O₄ magnetite nanoparticles. These surface‐modified nanoparticles were characterized using various techniques such as transmission electron microscopy, X‐ray diffraction, thermogravimetric analysis, vibrating sample magnetometry, elemental analysis and Fourier transform infrared spectroscopy. The palladium catalyst exhibited efficient catalytic activity in Suzuki and Heck coupling reactions. This method has notable advantages such as excellent chemoselectivity, mild reaction conditions, short reaction times and excellent yields. The yields of the products were in the range 85–100%. Also, the nanocatalyst can be easily recovered with a permanent magnet and reused at least five times without noticeable leaching or loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of Sulfonic Acid Functionalized SBA‐15 as a New Nanoporous Acid Catalyst in the Green One‐Pot Synthesis of Spirooxindole‐4H‐pyrans

Sulfonic acid functionalized SBA‐15 (SBA‐Pr‐SO₃H) as a new nanoporous solid acid catalyst was applied in the green one‐pot synthesis of spirooxindole‐4H‐pyrans via condensation of isatins, malononitrile or methyl cyanoacetate or ethyl cyanoacetate, and 4‐hydroxycoumarin in water solvent. SBA‐Pr‐SO₃H was proved to be an efficient heterogeneous nanoporous solid acid catalyst with a pore size of 6 nm that could be easily handled and removed from the reaction mixture by simple filtration and can be recovered and reused for several times without any loss of activity. The significant merits of present methodology are its simplicity, short reaction time, good yields, and environmentally benign mild reaction condition as water was used as a green solvent.     

Convenient Synthesis of 14‐Aryl‐14‐H‐dibenzo[a,j]xanthenes Catalyzed by Acyclic Brønsted Acidic Ionic Liquid [H—NMP]+[HSO4]− under Microwave Irradiation

Efficient method for direct preparation of 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes through condensation of β‐naphthol with various aromatic aldehydes in the presence of the catalytic amount of [H—NMP]⁺[HSO₄]^? under microwave irradiation was described. This method has the advantages such as; very easy reaction workup, absolute separation of catalyst from the reaction mixture and smooth recyclability of catalyst. In this reaction 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Synthesis and characterization of a novel and green rod-like magnetic ZnS/CuFe2O4/agar organometallic hybrid catalyst for the synthesis of biologically-active 2-amino-tetrahydro-4H-chromene-3-carbonitrile derivatives

The magnetic biocompatible rod-like ZnS/CuFe₂O₄/agar organometallic hybrid catalyst was designed and prepared based on a natural macromolecule (agar) through a green and convenient method using inexpensive, nontoxic, and easily available substances. Then, the as-prepared catalyst was characterized by several techniques such as Fourier transform-infrared spectroscopy, energy-dispersive X-ray analysis, scanning electron microscopy image, transmission electron microscopy, vibrating sample magnetometry curve, X-ray diffraction pattern, and thermogravimetric analysis. Eventually, the catalytic application of the ZnS/CuFe₂O₄/agar nanobiocomposite was assessed in sequential Knoevenagel condensation–Michael addition reaction of dimedone, malononitrile, and different substituted aromatic aldehydes for the synthesis of 2-amino-tetrahydro-4H-chromene-3-carbonitrile derivatives. Some notable strengths of this environmentally benign catalyst include simplicity of catalyst preparation and separation, affording desired products with satisfactory yields (81%–97%) in very short reaction times (3–18 min), and with no need for complicated work-up processes. Experimental tests showed that the catalyst can be successfully reused after five sequential runs without significant reduction in its catalytic efficiency.     

FeCl_3: Highly Efficient Catalyst for Synthesis of α-Amino Nitriles

α‐Amino nitriles are synthesized by the three‐component coupling reaction of aldehydes, amines and trimethylsilyl cyanide using FeCl₃ as a solid acid catalyst, under solvent‐free conditions in good yields. The catalyst was recovered by simple filtration and was recycled in subsequent reactions.     

Fe3O4@SiO2@D-NHCS-Tr as an efficient and reusable catalyst for the synthesis of indol-3-yl-4H-chromene via a multi-component reaction under solvent-free conditions

Fe₃O₄@SiO₂@D-NHCS-Tr was used as an efficient catalyst in the three-component reaction between indole derivatives, salicylaldehyde, and active methylene compounds under solvent-free conditions to the synthesis of indol-3-yl-4H-chromene derivatives. The features of this method include the green conditions of the reaction, easy separation, eco-friendly and cost-effectiveness of the catalyst, and high yield in short reaction times.     

Eco‐friendly magnetic clinoptilolite containing Cu(0) nanoparticles (CuNPs/MZN): as a new efficient catalyst for the synthesis of propargylamines via A3 and KA2 coupling reactions

In this reaserch a new and eco‐friendly magnetic catalyst for the synthesis of propargylamines is reported. Initial incorporation of Fe₃O₄ magnetic nanoparticles (MNPs) into the pores of the natural clinoptilolite zeolite followed by modification with epichlorohydrine and ethylenediamine and then immobilization of CuNPs on the surface of functionalized zeolite gave the desired catalyst (CuNPs/MZN). The CuNPs/MZN was fully characterized by various techniques such as FT‐IR, CHN, TGA, ICP, XRD, SEM, TEM and BET. A host of propargylamines were readily synthesized through using the catalyst in high yields and short reaction times via A³ and KA² coupling reactions of aldehydes/ketones, amines, and phenylacetylene. The CuNPs/MZN was easily separated from the reaction mixture by an external magnet and reused several times successfully. The catalyst has the potential for catalysis of various organic transformations.     

Efficient one-pot synthesis of some new pyrimido[5′,4′:5,6]pyrido[2,3-d]pyrimidines catalyzed by magnetically recyclable Fe3O4 nanoparticles

The study is devoted to one-pot reaction of 1,3-dimethylbarbituric acid with aromatic aldehydes and ammonium acetate using Fe₃O₄ nanoparticles as efficient and magnetically recyclable catalysts. Aromatic aldehydes substituted with electron-withdrawing groups or none, reacted successfully with 1,3-dimethylbarbituric acid and ammonium acetate to give new pyrimido[5′,4′:5,6]pyrido[2,3-d]pyrimidine derivatives (can be also named as pyrido[2,3-d:6,5-d′]dipyrimidines) in high yields over relatively short reaction time. The Knoevenagel condensation products were isolated using aromatic aldehydes bearing electron-donating substituents. The catalyst could be efficiently used for four times without substantial reduction in its activity. The new products were characterized on the basis of FT-IR, ¹H NMR and ¹³C NMR spectral data.

     

POCl3-mediated synthesis of 2-substituted benzimidazolyl-coumarin,benzimidazolyl-indole,and styrylbenzimidazole derivatives

2-Substituted benzimidazolyl heterocycles and styrylbenzimidazoles have been synthesized by the reaction of substituted o-phenylenediamine with different heterocyclic carboxylic acids and cinnamic acid respectively in the presence of POCl₃ as a solvent and catalyst. The proposed reaction has advantageous features of good yields, short reaction times, and operational simplicity. In addition, the scope and limitations were explored, and a plausible reaction mechanism was proposed. The synthesized molecules were characterized by infrared, ¹H NMR, ¹³C NMR, and mass spectral data. Further, single crystals of 2-(1H-indol-2-yl)-1H-benzo[d]imidazole have been developed and structural parameters were collected from x-ray diffraction data.     

Multi-component reaction synthesis of novel 3-phenyl-3,4-dihydro-2H-benzo[a][1,3] oxazino[5,6-c]phenazine derivatives catalyzed by reusable ZnO-PTA@Fe3O4/EN-MIL-101(Cr) nanopowder at room temperature

ABSTRACT

A simple, one-pot procedure for the synthesis of novel 3-phenyl-3,4-dihydro-2H-benzo[a][1,3] oxazino[5,6-c]phenazine derivatives by four-component coupling reaction between benzo[a]phenazine-5-ol, formaldehyde and amine in the presence of a catalytic amount ZnO-PTA@Fe₃O₄/EN-MIL-101(Cr) nanopowder in ethanol at room temperature under stirring condition. ZnO-PTA@Fe₃O₄/EN-MIL-101(Cr) An inorganic magnetic catalyst was analyzes and described by the XRD, TEM, FESEM, TGA, AFM, VSM and ICP-OES. This study presents simple, efficient, and one-pot multicomponent protocol, which provides several advantages such as short reaction times, high yields, easy working up, chromatography-free technique, catalyst recovery, and reusability are other highlights of this work.     

Magnetically Recyclable Nano-Fe2O3-Catalyzed Chemoselective Synthesis and Antioxidant Activity of Diethyl (3-((5-Aryl-1H-1,2,4-triazol-3-yl)thio)propyl)phosphonates

An efficient, green, and chemoselective S-alkylation of 5-aryl-1H-1,2,4-triazole-3-thiones with diethyl (3-bromopropyl)phosphonate in water, catalyzed by nano-Fe₂O₃ under ligand- and base-free conditions, is reported. Clean reaction, less expensive catalyst, excellent yields, and easy workup are the advantages of the present method. The catalyst can be easily collected by a magnet and recycled without significant loss in catalytic activity. The newly synthesized compounds were screened for their antioxidant property by using 1,1-diphenyl-2-picrylhydrazyl (DPPH) scavenging assay. The majority of the compounds exhibited good antioxidant activity.