Crystallographic and Solution Anion Binding Studies of Bis-amidofurans and Thiophenes

A variety of furan and thiophene amide and thioamide cleft type anion receptors have been synthesised and crystallographically characterised. Unlike 2,5-diamidopyrrole anions, analogous 2,5-diamidofurans and thiophenes do not interlock in the solid state. The anion binding properties of these receptors have been investigated in DMSO/0.5% water solution using ¹H NMR titration techniques. Solution studies and solid-state evidence suggests that the thiophene receptors may utilise a thiophene CH hydrogen atom for hydrogen bond formation to anions with a 2,4-diamidothiophene showing similar anion binding affinities to a 2,5-diamidopyrrole.     

The syntheses and conformational studies of [n](2,4)heterophanes and [7](3,5)pyrazolophane

Synthetic sequences from (n + 3)-membered 2-cycloalkenones provide furan, thiophene and pyrrole derivatives bridged at the 2,4-positions by n-methylene chains (n = 6, 7, and 9) as well as a pyrazole derivative bridged at the 3,5-positions (n = 7). The molecular geometry as a function of the chain length has been investigated spectrometrically. The aliphatic chain of [7](2,4)pyrrolophane and [7](3,5)pyrazolophane is found to reside in the one side of the respective heteroaromatic rings even at 205°, whereas that of [7](2,4)thiophenophane flips up and down the thiophene ring upon heating, the energy barrier ΔG_c^≠ being 18·2 kcal/mol (T_c 111°C at 60 MHz). The conformational behaviour of the heptamethylene chain is thus dependent on the angle between the bonds connecting each heteroaromatic carbon with the benzylic one. Though the hexamethylene chain of the [6](2,4)heterophanes is fixed to the one side of the aromatic ring, the nonamethylene chain of the [9]-homologues is rapidly moving between the both sides even at room temperature. The red-shifts of the B-bands are attributed to the distorted, nonplanar heteroaromatic rings. The mass spectra of these heterophanes indicate the initial C(1)-C(2) fission of the polymethylene chain probably due to the steric strain of the systems.     

The effect of thiophene ring substitution position on the properties and electrochemical behaviour of alkyne-dicobaltcarbonylthiophene complexes

A large number of Co₂(CO)_6^- and Co₂(CO)₄(L-L)-substituted alkyne complexes (L-L = dppa and dmpm) have been prepared, characterized and studied by cyclic and square-wave voltammetry. In this paper we report a comparative electrochemical study of 2,5-, 2,4-, 3,4- and 2,3-bis(trimethylsilylethynyl)thiophene dicobalt substituted alkyne complexes, in order to evaluate the extent of the electronic interaction between the “Co₂C₂” redox centres depending on the position of the alkynyl substituent on the thiophene ring.     

Improved Method for the Synthesis of Dialkyl-substituted Thiophene 1, 1-Dioxides

Abstract

The peracid oxidation of substituted thiophenes to thiophene 1, 1-dioxides has been extensively investigated by Melles and Backer^1,2. Most oxidations, especially those of 3,4-disubstituted thiophenes, afford the sulfones in fair to good yields. Oxidation of 2,5-dimehtylthiophene, however, only yields 14% of the corresponding dioxide. As we needed considerable amounts of this dioxide and related compounds for oxidation studies³ and the preparation of cyclo-heptatrienes⁴, we had to improve the method of its synthesis. We found that using the commercially available m-chloroperbenzoic acid as the oxidant, freezing out (?55 °C) most of the m-chlorobenzoic acid formed and subsequently removing the residual acid with the aid of tert-amino-substituted macroreticular resins, the yield could be increased considerably (Table I). An additional advantage of using the above-mentioned ion-exchange resins is that they decompose any excess of the peracid. This procedure was also successfully applied to the synthesis of other 2,5- or 2,4-disubstituted thiophene 1,1-dioxides (see Table I).     

Photocyclization reaction of a diarylmaleimide derivative in polar solvents

Photochromism of a symmetric diarylmaleimide derivative, having two thiophene rings (1), and a non-symmetric derivative having a S,S-dioxide thiophene ring and a thiophene ring (2) as the aryl moieties, was studied in various solvents. The photocyclization quantum yield of gradually decreased with increasing the solvent polarity and the reaction was not observed in polar solvents, such as ethanol and acetonitrile; on the other hand, such a strong solvent dependence of the photocyclization reaction was not observed for ; the different behavior is attributed to the weaker electron donating ability of the S,S-dioxide thiophene ring.     

Thiocyanate-free cyclometalated ruthenium sensitizers for solar cells based on heteroaromatic-substituted 2-arylpyridines

The first examples of thiocyanate-free thiophene-substituted Ru(ii) cyclometalated complexes, based on thiophene-derived 2-(2,4-difluorophenyl)pyridine ligands, are presented and investigated as photosensitizers in DSCs. Upon thiophene substitution the complexes presented enhanced optical properties compared to the reference dye with no thiophene substitution. DSCs based on the dithienyl-derived dye showed power conversion efficiencies up to 5.7%, more than twice that containing the complex without the thiophene substitution.     

Synthesis and electrophilic trichloromethylation of 2,4-dialkylthiophenes. Some transformations of 2,4-di-tert-butyl-5-(trichloromethyl)thiophene

The disproportionation products of the C-protonation of 5-tert-butyl-2-methyl- and 2-ethylthiophene first give 4-tert-butyl-2-methyl- and 2-ethylthiophene. We studied the electrophilic trichloromethylation of a series of 2,4-dialkyl thiophenes and showed that the reaction goes smoothly only for the most sterically hindered 2,4-di-tertbutyl-thiophene. We studied the reaction of 2,4-di-tert-butyl-5-(trichloromethyl)thiophene with some O- and N-nucleophiles.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1040–1045, August, 1993.     

Photoisomerization of bis(trifluoromethyl)thiophenes

The photolysis of 2,3-bis(trifluoromethyl)thiophene gave an equilibrium mixture of 2,3- and 3,4-bis(trifluoromethyl)Dewar thiophenes, while that of 2,5-bis(trifluoromethyl)thiophene gave 2,4-bis(trifluoromethyl)-thiophene, which seemed to be formed through an intermediate other than the Dewar form.     

Multibubble sonolysis and sonoluminescence in molten elementary sulfur and sulfur—styrene mixture

The effect of saturation with argon, as well as styrene and iodine additives on the temperature dependence of multibubble sonoluminescence intensity in molten sulfur at 120–230 °C was studied. The shape of the temperature dependence with a maximum at 170–200 °C is determined by the viscosity variations related to the changes in the molecular structure of molten elemental sulfur. At high temperatures, cyclooctasulfane (S₈) molecules break to radical products, which then undergo polymerization that can be slowed down by the additives. Sulfurization of styrene during sonolysis of a sulfur—styrene mixture resulting in products of the thiophene series was detected. Unlike thermal sulfurization that affords 2,5-diphenylthiophene as a major product, sonochemical sulfurization results mainly in 2,4-diphenylthiophene. The mechanism of 2,4-diphenylthiophene formation initiated by the reaction of styrene molecules with S⁺ ions produced upon fragmentation of S₈ within cavitation bubbles is proposed. The glow of electronically excited S⁺* ions is responsible for the band with a maximum at 560 nm in the sonoluminescence spectrum of molten sulfur, which is suppressed by the styrene additive.     

Synthesis of a new diarylethene diradical which has extended π-conjugated chains from the 2,5-position of one thiophene ring

A diarylethene diradical having a new switching unit for intramolecular magnetic interaction was synthesized. The photoswitching unit has an extended π-conjugated chain in one aryl unit, and two nitronyl nitroxide radical are placed at both ends of the π-conjugated chain. The diarylethene moiety is located in the middle of the chain. This diarylethene is designed to change the hybrid orbital from sp² to sp³ at the 2-position of the thiophene ring when this diarylethene undergoes a photochromic reaction. But the new diradical compound did not undergo photocyclic reaction upon irradiation with UV light. The photochemical behavior is perturbed by a resonant quinoid structure which stabilizes the open-ring isomer.     

The reactions of non-gem-hexanedioxytetrachlorocyclotriphosphazene with 2-(2-hydroxyethyl)thiophene,benzyl alcohol and 1,1,3,3-tetramethylguanidine. Spectroscopic studies of the derived products

Abstract

Reactions of non-gem-hexanedioxytetrachlorocyclotriphosphazene (1) with monofunctional nucleophilic reagents, 2-(2-hydroxyethyl)thiophene (2), benzyl alcohol (3) and 1,1,3,3-tetramethylguanidine (4) were investigated. The reactions, using an excess of NaH, in THF solutions, under refluxing conditions and with 1:2?mole ratios allow the synthesis of the following novel cyclotriphosphazene derivatives: 2,4-dichloro-2,4-(hexane-1,6-dioxy)-6,6-[2-(2-ethoxy)hiophene]-cyclotriphosphazatriene, N₃P₃Cl₂[O(CH₂)₆O-(C₆H₈OS)₂] (5); 2,4-(hexane-1,6-dioxy)-2,4,6,6-[2-(2-ethoxy) thiophene]-cyclotriphosphazatriene, N₃P₃[O(CH₂)₆O-(C₆H₈OS)₄] (6); 2,4-dichloro-2,4-(hexane-1,6-dioxy)-6,6-(methoxybenzene)-cyclotriphosphazatriene, N₃P₃Cl₂[O(CH₂)₆O-(C₆H₅CH₂O)₂] (7); 2,4-(hexane-1,6-dioxy)-2,4,6,6-(methoxybenzene)-cyclotriphosphazatriene, N₃P₃[O(CH₂)₆O-(C₆H₅CH₂O)₄] (8); and 2,4-dichloro-2,4-(hexane-1,6-dioxy)-6,6-(1,1,3,3-tetramethyguanidine)-cyclotriphosphazatriene, N₃P₃Cl₂[O(CH₂)₆O-HN-CN₂(CH₃)₄] (9). The structures of the synthesized compounds (5–9) have been characterized by elemental analysis, TLC-MS, ¹H, ¹³C and ³¹P {+¹H} and {?¹H} NMR spectral data.     

Synthesis and Characterization of a Thiophene Copolymer for Photovoltaic Application

A soluble thiophene copolymer having polar and non polar side groups was synthesized and its photovoltaics performance was investigated. The synthesized copolymer was characterized using Nuclear Magnetic Resonance (NMR) and optical spectroscopy. Dye sensitized solar cells were fabricated using this copolymer as sensitizer. An open-circuit voltage of 0.50V, a short-circuit current density of 1.195 mA/cm² and an overall power conversion efficiency of 0.3% were measured.     

Influence of the Thiophene Ring on the Molecular Order of Structurally Simple π-Conjugated Smectogens: 13C NMR Study

Structurally simple rod-like π-conjugated mesogens with thiophene directly connected to phenyl, biphenyl, and fluorenone rings with terminal chains are synthesized respectively. The occurrence of smectic A/smectic C phases is concurred by a hot-stage optical polarising microscope (HOPM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The static 1D and 2D ¹³C nuclear magnetic resonance (NMR) studies in the liquid crystalline phase are carried out to find the alignment-induced chemical shifts (AIS) and ¹³C−¹H dipolar couplings. The orientational order parameters of the mesogens determined from ¹³C−¹H dipolar couplings disclose that the long axis is not only collinear to the C3−C4 bond of the thiophene ring but also for the local axes of phenyl and biphenyl rings. For fluorenone-based mesogen, the molecular biaxiality is found to be high owing to the increased breadth of the molecule. The study unveils that the orientation of thiophene and the phenyl rings is similar in the current mesogens in stark contrast to mesogens, where thiophene is connected to phenyl rings through linking groups.     

BINUCLEAR METAL CHELATES OF BISACETYLACETONE BIPHENYLDIHYDRAZONE

Abstract

Reaction of bihenyl-4,4′-tetrazonium ion with 2,4-pentanedione leads to 3,3′-(4,4′-biphenyldihydrazoni)bis-(2,4-pentanedione).The compound exists in the intramolecularly hydrogen bonded dihydrazone state. Copper(II), nickel(II) and palladium(II) complexes having the composition M₂L₂ have been synthesised and characterised. Ir, ¹H and ¹³C nmr and mass spectroscopic data clearly indicate the binucleating nature of the chelates in which the hydrogen bonded carbonyls and one of the hydrazono nitrogens of each pentanedione group are involved in bonding with the metal ion.     

Benzannelated analogs of phenanthro[1,2-b]- and [2,1-b]thiophene: Synthesis and structural characterization by two-dimensional NMR and X-ray techniques

Syntheses of benzo[3,4]phenanthro[1,2-b]thiophene, benzo[3,4]phenanthro[2,1-b]thiophene and their 1-methyl analogs are reported as potential constituents of solvent refined coal liquids and for mutagenicity testing. The attempted synthesis of the 13-methyl analogs which gave the 11-methyl isomers is also described. Total assignments of the ¹H- and ¹³C-nmr spectra based on long range optimized heteronuclear protoncarbon two-dimensional chemical shift correlation are reported. Carbon assignments obtained for benzo[3,4]-phenanthro[1,2-b]thiophene using this approach were confirmed with a 125 MHz ¹³C–¹³C INADEQUATE spectrum. X-Ray crystal structures were determined for benzo[3,4]phenanthro[1,2-b]thiophene and 1-methyl-benzo[3,4]phenanthro[2,1-b]thiophene. Both molecules were helically distorted from planarity. Close intramolecular contacts between the bay region H1–H13 and ClMe-H13 of 2.03 and 2.28 Å, respectively, were responsible for the distortions. There were no close intermolecular contacts of <3.5Å. both molecules refined to an R value of <0.05.     

Quantum interference enhanced thermopower in single-molecule thiophene junctions

Quantum interference(QI) effects, which offer unique opportunities to widely manipulate the charge transport properties in the molecular junctions, will have the potential for achieving high thermopower.Here we developed a scanning tunneling microscope break junction technique to investigate the thermopower through single-molecule thiophene junctions. We observed that the thermopower of 2,4-TPSAc with destructive quantum interference(DQI) was nearly twice of 2,5-TP-SAc without DQI, while the con...     

Formation of negative ions by interaction of electrons with heterocyclic compounds

Curves are derived for the effective yield of negative ions from the interaction of electrons with thiophene, 2-methylthiophene, 2-propylthiophene, 3-methylthiophene, 3-propylthiophene, furan, and selenophene. It is found that there are two quasi-stationary states of the molecular negative ions having lifetimes of about 10^–14 and 4 · 10^–15 sec. The cross sections for formation of these states are estimated, and also the cross sections for resonant elastic scattering of electrons. The states are shown to be related to excited states of the molecule. It is found that alkyl substitution has the following effects on resonant electron capture: a) reduces the probability of ring breakage and b) reduces the energy levels of the quasi-stationary state. Some aspects of dissociative ionization are discussed.     

Diketopyrrolopyrrole?Thiophene‐Based Acceptor–Donor–Acceptor Conjugated Materials for High‐Performance Field‐Effect Transistors

We report the synthesis, morphology, and field‐effect‐transistor (FET) characteristics of new acceptor–donor–acceptor conjugated materials that consist of diketopyrrolopyrrole (DPP) acceptor groups and one of four different thiophene moieties, that is, dithiophene (2T), thieno[3,2‐b]‐thiophene (TT), dithieno[3,2‐b:2′,3′‐d]‐thiophene (DTT), and 5,5′′′‐di‐(2‐ethylhexyl)‐[2,3′;5′,2′′;4′′,2′′′]quaterthiophene (4T). The optical band gaps of the as‐prepared materials are smaller than 1.7 eV, which is attributed to the strong intramolecular charge transfer and the backbone coplanarity of the thiophene moieties. The order of both crystallinity and FET mobility (×10^?2–×10^?4 cm² V^?1 s^?1) is TT2DPP > 4T2DPP > 2T2DPP >DTT2DP, which differ in the structure of the π‐conjugated cores and core symmetry. Well‐ordered intermolecular chain packing was confirmed by the GIXD and AFM results. In particular, the FET hole mobility of TT2DPP was further improved to 0.1 cm² V^?1 s^?1, which was attributed to the well‐interconnected structure through solution‐shearing. These experimental results suggest the potential applications of the new DPP? thiophene? DPP conjugated materials for organic electronic devices.     

Synthesis and Mesomorphic Behavior of 3‐Alkyl‐2,5‐ bis[p‐(hexa‐2,4‐dienoyloxy)phenyl]‐Thiophene Derivatives

3‐Alkyl‐2,5‐bis[p‐(hexa‐2,4‐dienoyloxy)phenyl]‐thiophene derivatives were synthesized by using Kumada coupling and Suzuki coupling reactions as key steps. The thermotropic liquid crystalline behavior of these compounds was investigated by optical polarized microscopy, monotropic nematic mesophases were observed in such compounds.     

Kinetics of the reactions of O3 and OH radicals with furan and thiophene at 298 ± 2 K

Rate constants for the reactions of O₃ and OH radicals with furan and thiophene have been determined at 298 ± 2 K. The rate constants obtained for the O₃ reactions were (2.42 ± 0.28) × 10^?18 cm³/molec·s for furan and <6 ×10^?20 cm³/molec·s for thiophene. The rate constants for the OH radical reactions, relative to a rate constant for the reaction of OH radicals with n-hexane of (5.70 ± 0.09) × 10^?12 cm³/molec·s, were determined to be (4.01 ± 0.30) × 10^?11 cm³/molec·s for furan and (9.58 ± 0.38) × 10^?12 cm³/molec·s for thiophene. There are to date no reported rate constant data for the reactions of OH radicals with furan and thiophene or for the reaction of O₃ with furan. The data are compared and discussed with respect to those for other alkenes, dialkenes, and heteroatom containing organics.