Highly Crystalline and Semiconducting Imine‐Based Two‐Dimensional Polymers Enabled by Interfacial Synthesis

Single‐layer and multi‐layer 2D polyimine films have been achieved through interfacial synthesis methods. However, it remains a great challenge to achieve the maximum degree of crystallinity in the 2D polyimines, which largely limits the long‐range transport properties. Here we employ a surfactant‐monolayer‐assisted interfacial synthesis (SMAIS) method for the successful preparation of porphyrin and triazine containing polyimine‐based 2D polymer (PI‐2DP) films with square and hexagonal lattices, respectively. The synthetic PI‐2DP films are featured with polycrystalline multilayers with tunable thickness from 6 to 200 nm and large crystalline domains (100–150 nm in size). Intrigued by high crystallinity and the presence of electroactive porphyrin moieties, the optoelectronic properties of PI‐2DP are investigated by time‐resolved terahertz spectroscopy. Typically, the porphyrin‐based PI‐2DP 1 film exhibits a p‐type semiconductor behavior with a band gap of 1.38 eV and hole mobility as high as 0.01 cm² V^?1 s^?1, superior to the previously reported polyimine based materials.     

Two-Dimensional Boronate Ester Covalent Organic Framework Thin Films with Large Single Crystalline Domains for a Neuromorphic Memory Device

Despite the recent progress in the synthesis of crystalline boronate ester covalent organic frameworks (BECOFs) in powder and thin-film through solvothermal method and on-solid-surface synthesis, respectively, their applications in electronics, remain less explored due to the challenges in thin-film processability and device integration associated with the control of film thickness, layer orientation, stability and crystallinity. Moreover, although the crystalline domain sizes of the powder samples can reach micrometer scale (up to ≈1.5 μm), the reported thin-film samples have so far rather small crystalline domains up to 100 nm. Here we demonstrate a general and efficient synthesis of crystalline two-dimensional (2D) BECOF films composed of porphyrin macrocycles and phenyl or naphthyl linkers (named as 2D BECOF-PP or 2D BECOF-PN ) by employing a surfactant-monolayer-assisted interfacial synthesis (SMAIS) on the water surface. The achieved 2D BECOF-PP is featured as free-standing thin film with large single-crystalline domains up to ≈60 μm² and tunable thickness from 6 to 16 nm. A hybrid memory device composed of 2D BECOF-PP film on silicon nanowire-based field-effect transistor is demonstrated as a bio-inspired system to mimic neuronal synapses, displaying a learning–erasing–forgetting memory process.     

Two‐Dimensional Boronate Ester Covalent Organic Framework Thin Films with Large Single Crystalline Domains for a Neuromorphic Memory Device

Despite the recent progress in the synthesis of crystalline boronate ester covalent organic frameworks (BECOFs) in powder and thin‐film through solvothermal method and on‐solid‐surface synthesis, respectively, their applications in electronics, remain less explored due to the challenges in thin‐film processability and device integration associated with the control of film thickness, layer orientation, stability and crystallinity. Moreover, although the crystalline domain sizes of the powder samples can reach micrometer scale (up to ≈1.5 μm), the reported thin‐film samples have so far rather small crystalline domains up to 100 nm. Here we demonstrate a general and efficient synthesis of crystalline two‐dimensional (2D) BECOF films composed of porphyrin macrocycles and phenyl or naphthyl linkers (named as 2D BECOF‐PP or 2D BECOF‐PN ) by employing a surfactant‐monolayer‐assisted interfacial synthesis (SMAIS) on the water surface. The achieved 2D BECOF‐PP is featured as free‐standing thin film with large single‐crystalline domains up to ≈60 μm² and tunable thickness from 6 to 16 nm. A hybrid memory device composed of 2D BECOF‐PP film on silicon nanowire‐based field‐effect transistor is demonstrated as a bio‐inspired system to mimic neuronal synapses, displaying a learning–erasing–forgetting memory process.     

Two-Dimensional Conjugated Polymer Synthesized by Interfacial Suzuki Reaction: Towards Electronic Device Applications

Preparing two-dimensional conjugated polymers (2DCPs) with desirable structures and semiconducting properties is promising but remains a great challenge. Presented here is a new 2DCP, named 2D polytriethyltriindole (2DPTTI), which is efficiently synthesized by a modified interfacial Suzuki reaction from 2,7,12-tribromo-5,10,15-triethyltriindole (2-BrTTI) and 1,4-benzenediboronic acid dipinacol ester (BADE) precursors at room temperature. Wafer-scale free-standing 2DPTTI films with controllable thicknesses between 2.5 and 46.0 nm were obtained by adjusting the experimental conditions. The resulting 2DPTTI films, used as an active layer in organic field effect transistors (OFETs), exhibited typical p-type semiconducting properties and superior UV optoelectronic performance with a photosensitivity of 3.7×10³ and responsivity of 1.4×10³ A W⁻¹, as well as a light-blue fluorescence character. This report provides a general approach for constructing various semiconducting 2DCPs, by an interfacial Suzuki reaction, towards multifunctional organic electronics.     

Comparative Solution Synthesis of Mn Doped (Na,K)NbO3 Thin Films

(K_0.5Na_0.5)NbO₃ (KNN) is a promising lead-free alternative for ferroelectric thin films such as Pb(Zr,Ti)O₃. One main drawback is its high leakage current density at high electric fields, which has been previously linked to alkali non-stoichiometry. This paper compares three acetate-based chemical solution synthesis and deposition methods for 0.5 mol % Mn-doped KNN film fabrication, using lower crystallization temperature processes in comparison to the sintering temperatures necessary for fabrication of KNN ceramics. This paper shows the crucial role of the A site homogenization step during solution synthesis in preserving alkali chemical homogeneity of Mn doped KNN films. Chemically homogeneous films show a uniform grain size of 80 nm and a leakage current density under 2.8×10⁻⁸ A cm⁻² up to electric fields as high as 600 kV cm⁻¹, which is the highest breakdown strength reported for KNN thin films. Solution synthesis involving two-step pyrolysis resulted in films with dense, columnar microstructures, which are interesting for orientation control and enhancement of piezoelectric properties. This study reports detailed solution synthesis and deposition processes with good dielectric, ferroelectric and breakdown field properties. An optimized fabrication method that should couple low leakage current density with dense and oriented microstructures is proposed.     

Giant Emission Enhancement of Solid-State Gold Nanoclusters by Surface Engineering

Ligand-induced surface restructuring with heteroatomic doping is used to precisely modify the surface of a prototypical [Au₂₅(SR¹)₁₈]⁻ cluster ( 1 ) while maintaining its icosahedral Au₁₃ core for the synthesis of a new bimetallic [Au₁₉Cd₃(SR²)₁₈]⁻ cluster ( 2 ). Single-crystal X-ray diffraction studies reveal that six bidentate Au₂(SR¹)₃ motifs (L2) attached to the Au₁₃ core of 1 were replaced by three quadridentate Au₂Cd(SR²)₆ motifs (L4) to create a bimetallic cluster 2 . Experimental and theoretical results demonstrate a stronger electronic interaction between the surface motifs (Au₂Cd(SR²)₆) and the Au₁₃ core, attributed to a more compact cluster structure and a larger energy gap of 2 compared to that of 1 . These factors dramatically enhance the photoluminescence quantum efficiency and lifetime of crystal of the cluster 2 . This work provides a new route for the design of a wide range of bimetallic/alloy metal nanoclusters with superior optoelectronic properties and functionality.     

Heat-Treated Aerogel as a Catalyst for the Oxygen Reduction Reaction

Aerogels are fascinating materials that can be used for a wide range of applications, one of which is electrocatalysis of the important oxygen reduction reaction. In their inorganic form, aerogels can have ultrahigh catalytic site density, high surface area, and tunable physical properties and chemical structures—important features in heterogeneous catalysis. Herein, we report on the synthesis and electrocatalytic properties of an iron–porphyrin aerogel. 5,10,15,20-(Tetra-4-aminophenyl)porphyrin (H₂TAPP) and Fe^II were used as building blocks of the aerogel, which was later heat-treated at 600 °C to enhance electronic conductivity and catalytic activity, while preserving its macrostructure. The resulting material has a very high concentration of atomically dispersed catalytic sites (9.7×10²⁰ sites g⁻¹) capable of catalyzing the oxygen reduction reaction in alkaline solution (E_onset=0.92 V vs. RHE, TOF=0.25 e⁻ site⁻¹ s⁻¹ at 0.80 V vs. RHE).     

A Boat-Shaped Tetracationic Macrocycle with a Semiconducting Organic Framework

We report the synthesis of a tetracationic macrocycle which contains two N,N′-bis(methylene)naphthalenediimide units inserted in between the pyridinium rings of the bipyridinium units in cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺ or “blue box”) and describe the investigation of its potential use in materials for organic electronics. The incorporation of the two naphthalenediimide (NDI) units into the constitution of CBPQT⁴⁺, not only changes the supramolecular properties of the tetracation in the solid state, but also has a profound influence on the electrochemical and electronic behavior of the resulting tetracationic macrocycle. In particular, the solid-state (super)structure, investigated by single-crystal X-ray diffraction, reveals the formation of a three-dimensional (3D) supramolecular framework with ca. 2.8 nm diameter one-dimensional (1D) hexagonal channels. Electrochemical studies on solid-state thin films of the macrocycle show that they exhibit semiconducting properties with a redox-conductivity of up to 7.6×10⁻⁴ S m⁻¹. Moreover, EPR and ENDOR spectroscopies show that charge is equally shared between the NDIs within the one-electron reduced state of the NDI-based macrocycle on the time scale of these techniques.     

Two‐Dimensional Conjugated Polymer Synthesized by Interfacial Suzuki Reaction: Towards Electronic Device Applications

Preparing two‐dimensional conjugated polymers (2DCPs) with desirable structures and semiconducting properties is promising but remains a great challenge. Presented here is a new 2DCP, named 2D polytriethyltriindole (2DPTTI), which is efficiently synthesized by a modified interfacial Suzuki reaction from 2,7,12‐tribromo‐5,10,15‐triethyltriindole (2‐BrTTI) and 1,4‐benzenediboronic acid dipinacol ester (BADE) precursors at room temperature. Wafer‐scale free‐standing 2DPTTI films with controllable thicknesses between 2.5 and 46.0 nm were obtained by adjusting the experimental conditions. The resulting 2DPTTI films, used as an active layer in organic field effect transistors (OFETs), exhibited typical p‐type semiconducting properties and superior UV optoelectronic performance with a photosensitivity of 3.7×10³ and responsivity of 1.4×10³ A W^?1, as well as a light‐blue fluorescence character. This report provides a general approach for constructing various semiconducting 2DCPs, by an interfacial Suzuki reaction, towards multifunctional organic electronics.     

Synthesis of aromatic polyimines by the condensation of aromatic dialdehyde and diamine

Film-forming aromatic polyimines were prepared by low temperature solution polymerization of aromatic dialdehyde and aromatic diamine usingm-cresol. The polymerization proceeded rapidly to give high molecular weight polyimine solutions. Fibrous polymers were precipitated by pouring the solutions into anhydrous methanol. Lemon yellow-to-orange films were cast in situ from the reaction solutions. The polymers showed typical C=N stretching absorption near 1620 cm^?1 in infrared spectra and had high glass transitions of over 200 ?C but showed low crystallinity.     

Synthesis,Optical and Photovoltaic Properties of Porphyrin Dyes

The synthesis and optical absorption of a series of porphyrins, and the photoelectrochemical properties of TiO₂ solar cells sensititized with these porphyrins was investigated. The different types of porphyrins studied are designated by numbers: the reference compound 1 (Zinc(II) 5,15-bis(4-carboxylphenyl)porphyrin), porphyrin substituted with one triarylamine unit 2, and porphyrin substituted with two triarylamine units 3. The UV-Vis absorption spectra reveal that the substitutions result in large redshifts in both the Soret band (～ 60 nm) and the Q bands (～ 125 nm), as well as enhancement of optical absorption. The enhancement is even more pronounced in the long-wavelength region of 575–725 nm, where the absorption of porphyrin 3 is eight times that of porphyrin 1. The photoelectrochemical properties of the porphyrins were also studied by constructing porphyrin-sensitized TiO₂ solar cells. Under standard AM 1.5 sunlight, the porphyrin 1 cell yields a short-circuit current of ～ 1.26 mA/cm², an open-circuit voltage of ～ 0.564 V, and a fill factor of ～ 61%. The incident photon-to-current conversion efficiency is ～ 24% for porphyrin 1 and ～ 5–7% for porphyrins 2 and 3 at the Soret peak.     

A Stable Cyclic (R2SnAu)3 Anion Having In-Plane σ-Möbius Aromaticity

A cyclic (R₂SnAu)₃ anion ( 3⁻ , R₂Sn=2,2,5,5-tetrakis(trimethylsilyl)-1-stannacyclopentane-1,1-diyl) has been synthesized as a stable blue salt with K⁺(THF)₆ through the reaction of stable dialkylstannylene 1 with R′₃PAuCl (R′=Et, Ph) followed by the reduction with KC₈. Crystallographic and NMR analysis shows that the six-membered (SnAu)₃ ring of 3⁻ is planar and highly symmetric with an equal distance of six Au−Sn bonds. A UV/Vis spectrum of 3⁻ in hexane reveals an intense absorption maximum at 598 nm. While cyclic Au₃⁻ with four valence electrons is known as unstable anti-aromatic anion, 3⁻ with three divalent tin ligands is stable σ aromatic anion with an unprecedented Möbius orbital array as predicted by the perturbation MO and CCSD analysis of 3⁻ .     

High-Performance Perovskite Light-Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation

Defect passivation has been demonstrated to be effective in improving the radiative recombination of charge carriers in perovskites, and consequently, the device performance of the resultant perovskite light-emitting diodes (LEDs). State-of-the-art useful passivation agents in perovskite LEDs are mostly organic chelating molecules that, however, simultaneously sacrifice the charge-transport properties and thermal stability of the resultant perovskite emissive layers, thereby deteriorating performance, and especially the operational stability of the devices. We demonstrate that lithium halides can efficiently passivate the defects generated by halide vacancies and reduce trap state density, thereby suppressing ion migration in perovskite films. Efficient green perovskite LEDs based on all-inorganic CsPbBr₃ perovskite with a peak external quantum efficiency of 16.2 %, as well as a high maximum brightness of 50 270 cd m⁻², are achieved. Moreover, the device shows decent stability even under a brightness of 10⁴ cd m⁻². We highlight the universal applicability of defect passivation using lithium halides, which enabled us to improve the efficiency of blue and red perovskite LEDs.     

Intrinsically Low Thermal Conductivity and High Carrier Mobility in Dual Topological Quantum Material,n-Type BiTe

A challenge in thermoelectrics is to achieve intrinsically low thermal conductivity in crystalline solids while maintaining a high carrier mobility (μ). Topological quantum materials, such as the topological insulator (TI) or topological crystalline insulator (TCI) can exhibit high μ. Weak topological insulators (WTI) are of interest because of their layered hetero-structural nature which has a low lattice thermal conductivity (κ_lat). BiTe, a unique member of the (Bi₂)_m(Bi₂Te₃)_n homologous series (m:n=1:2), has both the quantum states, TCI and WTI, which is distinct from the conventional strong TI, Bi₂Te₃ (where m:n=0:1). Herein, we report intrinsically low κ_lat of 0.47–0.8 W m⁻¹ K⁻¹ in the 300–650 K range in BiTe resulting from low energy optical phonon branches which originate primarily from the localized vibrations of Bi bilayer. It has high μ≈516 cm² V⁻¹ s⁻¹ and 707 cm² V⁻¹ s⁻¹ along parallel and perpendicular to the spark plasma sintering (SPS) directions, respectively, at room temperature.     

Switching of Single‐Molecule Magnetic Properties of TbIII–Porphyrin Double‐Decker Complexes and Observation of Their Supramolecular Structures on a Carbon Surface

Double‐decker complexes based on single‐molecule magnets (SMMs) are a class of highly promising molecules for applications in molecular spintronics, wherein control of both the ligand oxidative states and the 2D supramolecular structure on carbon materials is of great importance. This study focuses on the synthesis and study of 2,3,7,8,12,13,17,18‐octaethylporphyrin (OEP)–Tb^III double‐decker complexes with different electronic structures comprising protonated, anionic, and radical forms. Magnetic susceptibility measurements revealed that only the anionic and radical forms of the OEP–Tb^III double‐decker complexes exhibited SMM properties. The barrier heights for magnetic moment reversal were estimated to be 207 and 215 cm^?1 for the anionic and radical forms, respectively. Scanning tunneling microscopy (STM) investigations revealed that these OEP–Tb^III complexes form well‐ordered monolayers upon simple dropcasting from dilute dichloromethane solutions. All three complexes form an isomorphic pseudo‐hexagonal 2D pattern, regardless of the differences in the electronic structures of their porphyrin–Tb cores. This finding is of interest for SMM technology as ultrathin films of these materials undergoing chemical transformations will not require any detrimental reorganization. Finally, we demonstrate self‐assembly of the protonated 5,15‐bisdodecylporphyrin (BDP)–Tb^III double‐decker complex as an example of successful supramolecular design to achieve controlled alignment of SMM‐active sites.     

Porphyrin/Quinoidal-Bithiophene-Based Macrocycles and Their Dications: Template-Free Synthesis and Global Aromaticity

We report the template-free synthesis and characterization of a new type of porphyrin/quinoidal-bithiophene-based conjugated macrocycle. X-ray crystallographic analysis of the dimer ( 2MC ) revealed a cyclophane-like geometry with large dihedral angles between the porphyrin and the neighboring thiophene rings, and NMR measurements and theoretical calculations confirmed a localized aromatic character of the porphyrin/thiophene rings and quinoidal character of the bithiophene linkers. Restricted rotation of the thiophene rings linked to the porphyrin unit was observed by variable-temperature NMR measurements. The dication ( 2MC²⁺ ) adopts a chair-shaped conformation to facilitate π-electron delocalization around the whole macrocycle. As a result, the molecule is globally aromatic, with a dominant 54 π conjugation pathway. The trimer ( 3MC ) also shows localized aromatic character of porphyrin rings and conformational flexibility, but its dication ( 3MC²⁺ ) is rigid and globally aromatic with a dominant 82 π conjugation pathway.     

Graphitic Carbon Nitride (g-C3N4): An Interface Enabler for Solid-State Lithium Metal Batteries

Solid-state Li metal batteries (SSLMBs) have attracted considerable interests due to their promising energy density as well as high safety. However, the realization of a well-matched Li metal/solid-state electrolyte (SSE) interface remains challenging. Herein, we report g-C₃N₄ as a new interface enabler. We discover that introducing g-C₃N₄ into Li metal can not only convert the Li metal/garnet-type SSE interface from point contact to intimate contact but also greatly enhance the capability to suppress the dendritic Li formation because of the greatly enhanced viscosity, decreased surface tension of molten Li, and the in situ formation of Li₃N at the interface. Thus, the resulting Li-C₃N₄|SSE|Li-C₃N₄ symmetric cell gives a significantly low interfacial resistance of 11 Ω cm² and a high critical current density (CCD) of 1500 μA cm⁻². In contrast, the same symmetric cell configuration with pristine Li metal electrodes has a much larger interfacial resistance (428 Ω cm²) and a much lower CCD (50 μA cm⁻²).     

A Three-Dimensional Porous Organic Semiconductor Based on Fully sp2-Hybridized Graphitic Polymer

Dimensionality plays an important role in the charge transport properties of organic semiconductors. Although three-dimensional semiconductors, such as Si, are common in inorganic materials, imparting electrical conductivity to covalent three-dimensional organic polymers is challenging. Now, the synthesis of a three-dimensional π-conjugated porous organic polymer (3D p-POP) using catalyst-free Diels–Alder cycloaddition polymerization followed by acid-promoted aromatization is presented. With a surface area of 801 m² g⁻¹, full conjugation throughout the carbon backbone, and an electrical conductivity of 6(2)×10⁻⁴ S cm⁻¹ upon treatment with I₂ vapor, the 3D p-POP is the first member of a new class of permanently porous 3D organic semiconductors.     

Pre-Polymerization Enables Controllable Synthesis of Nanosheet-Based Porphyrin Polymers towards High-Performance Li-Ion Batteries

The precise regulation of nucleation growth and assembly of polymers is still an intriguing goal but an enormous challenge. In this study, we proposed a pre-polymerization strategy to regulate the assembly and growth of polymers by facilely controlling the concentration of polymerization initiator, and thus obtained two kinds of different nanosheet-based porphyrin polymer materials using tetrakis-5,10,15,20-(4-aminophenyl) porphyrin (TAPP) as the precursor. Notably, due to the π–π stacking and doping of TAPP during the preparation process, the obtained PTAPP-nanocube material exhibits a high intrinsic bulk conductivity reaching 1.49×10⁻⁴ S m⁻¹. Profiting from the large π-conjugated structure of porphyrin units, closely stacked layer structure and excellent conductivity, the resultant porphyrin polymers, as electrode materials for lithium ion batteries, deliver high specific capacity (≈650 mAh g⁻¹ at the current density of 100 mA g⁻¹), excellent rate performance and long-cycle stability, which are among the best reports of porphyrin polymer-based electrode materials for lithium-ion batteries, to the best of our knowledge. Therefore, such a pre-polymerization approach would provide a new insight for the controllable synthesis of polymers towards custom-made architecture and function.     

A Two-Dimensional Porphyrin Coordination Supramolecular Network Cathode for High-Performance Aqueous Dual-Ion Battery

Iodine has great potential in the energy storage, but high solubility of I₃⁻ has seriously delayed its promotion. Benefited from abundant active sites and the open channel, two-dimensional coordination supramolecular networks (2D CSNs) is considered to be a candidate for the energy storage. Herein, a 2D porphyrin-CSN cathode named Zn-TCPP for aqueous iodine dual-ion battery (DIB) shows an excellent specific capacity of 278 mAh g⁻¹, and a high energy density of 340 Wh kg⁻¹ at 5 A g⁻¹, as well as a durable cycle performance of 5000 cycles and a high Coulombic efficiency of 98 %. Molecular orbital theory, UV/VIS, Raman spectroscopy and density functional theory (DFT) calculations reveal charge-transfer interaction between the donor of porphyrin nitrogen and the acceptor of I₃⁻, and computational fluid dynamics (CFD) simulations demonstrate the contribution of 2D layered network structure of Zn-TCPP to the penetration of I₃⁻.