In Situ Reconstruction of a Hierarchical Sn‐Cu/SnOx Core/Shell Catalyst for High‐Performance CO2 Electroreduction

The electrochemical CO₂ reduction reaction (CO₂RR) to give C₁ (formate and CO) products is one of the most techno‐economically achievable strategies for alleviating CO₂ emissions. Now, it is demonstrated that the SnO_x shell in Sn_2.7Cu catalyst with a hierarchical Sn‐Cu core can be reconstructed in situ under cathodic potentials of CO₂RR. The resulting Sn_2.7Cu catalyst achieves a high current density of 406.7±14.4 mA cm^?2 with C₁ Faradaic efficiency of 98.0±0.9 % at ?0.70 V vs. RHE, and remains stable at 243.1±19.2 mA cm^?2 with a C₁ Faradaic efficiency of 99.0±0.5 % for 40 h at ?0.55 V vs. RHE. DFT calculations indicate that the reconstructed Sn/SnO_x interface facilitates formic acid production by optimizing binding of the reaction intermediate HCOO* while promotes Faradaic efficiency of C₁ products by suppressing the competitive hydrogen evolution reaction, resulting in high Faradaic efficiency, current density, and stability of CO₂RR at low overpotentials.     

Observing Defect Passivation of the Grain Boundary with 2-Aminoterephthalic Acid for Efficient and Stable Perovskite Solar Cells

Metal halide perovskite solar cells (PSCs), with their exceptional properties, show promise as photoelectric converters. However, defects in the perovskite layer, particularly at the grain boundaries (GBs), seriously restrict the performance and stability of PSCs. Now, a simple post-treatment procedure involves applying 2-aminoterephthalic acid to the perovskite to produce efficient and stable PSCs. By optimizing the post-treatment conditions, we created a device that achieved a remarkable power conversion efficiency (PCE) of 21.09 % and demonstrated improved stability. This improvement was attributed to the fact that the 2-aminoterephthalic acid acted as a cross-linking agent that inhibited the migration of ions and passivated the trap states at GBs. These findings provide a potential strategy for designing efficient and stable PSCs regarding the aspects of defect passivation and crystal growth.     

High-Curvature Transition-Metal Chalcogenide Nanostructures with a Pronounced Proximity Effect Enable Fast and Selective CO2 Electroreduction

A considerable challenge in the conversion of carbon dioxide into useful fuels comes from the activation of CO₂ to CO₂^.− or other intermediates, which often requires precious-metal catalysts, high overpotentials, and/or electrolyte additives (e.g., ionic liquids). We report a microwave heating strategy for synthesizing a transition-metal chalcogenide nanostructure that efficiently catalyzes CO₂ electroreduction to carbon monoxide (CO). We found that the cadmium sulfide (CdS) nanoneedle arrays exhibit an unprecedented current density of 212 mA cm⁻² with 95.5±4.0 % CO Faraday efficiency at −1.2 V versus a reversible hydrogen electrode (RHE; without iR correction). Experimental and computational studies show that the high-curvature CdS nanostructured catalyst has a pronounced proximity effect which gives rise to large electric field enhancement, which can concentrate alkali-metal cations resulting in the enhanced CO₂ electroreduction efficiency.     

Hierarchical FeCo2S4@FeNi2S4 Core/Shell Nanostructures on Ni Foam for High-Performance Supercapacitors

The design of electrode materials with rational core/shell structures is promising for improving the electrochemical properties of supercapacitors. Hence, hierarchical FeCo₂S₄@FeNi₂S₄ core/shell nanostructures on Ni foam were fabricated by a simple hydrothermal method. Owing to their structure and synergistic effect, they deliver an excellent specific capacitance of 2393 F g⁻¹ at 1 A g⁻¹ and long cycle lifespan as positive electrode materials. An asymmetric supercapacitor device with FeCo₂S₄@FeNi₂S₄ as positive electrode and graphene as negative electrode exhibited a specific capacitance of 133.2 F g⁻¹ at 1 A g⁻¹ and a high energy density of 47.37 W h kg⁻¹ at a power density of 800 W kg⁻¹. Moreover, the device showed remarkable cycling stability with 87.0 % specific-capacitance retention after 5000 cycles at 2 A g⁻¹. These results demonstrate that the hierarchical FeCo₂S₄@FeNi₂S₄ core/shell structures have great potential in the field of electrochemical energy storage.     

Photoelectrochemical CO2 Reduction with a Rhenium Organometallic Redox Mediator at Semiconductor/Aqueous Liquid Junction Interfaces

Electrochemical and photoelectrochemical CO₂ reductions were carried out with Re(bh‐bipy)(CO)₃(OH₂) cocatalysts in aqueous electrolytes. Competition between hydrogen evolution and CO₂ reduction was observed under (photo)electrochemical conditions for both glassy carbon and CuInS₂ electrodes. The partial current density for CO generation is limited even though the additional potential is applied. However, electrochemical hydrogen evolution was suppressed under photoelectrochemical conditions, and the selectivity and partial current density for CO were considerably increased when compared to the electrochemical reduction in an identical electrode/electrolyte system. This finding may provide insights into using semiconductor/liquid junctions for solar fuel devices to overcome the limitations of electrolysis systems with an external bias.     

Controlled Synthesis of a Vacancy-Defect Single-Atom Catalyst for Boosting CO2 Electroreduction

The reaction of precursors containing both nitrogen and oxygen atoms with Ni^II under 500 °C can generate a N/O mixing coordinated Ni-N₃O single-atom catalyst (SAC) in which the oxygen atom can be gradually removed under high temperature due to the weaker Ni−O interaction, resulting in a vacancy-defect Ni-N₃-V SAC at Ni site under 800 °C. For the reaction of Ni^II with the precursor simply containing nitrogen atoms, only a no-vacancy-defect Ni-N₄ SAC was obtained. Experimental and DFT calculations reveal that the presence of a vacancy-defect in Ni-N₃-V SAC can dramatically boost the electrocatalytic activity for CO₂ reduction, with extremely high CO₂ reduction current density of 65 mA cm⁻² and high Faradaic efficiency over 90 % at −0.9 V vs. RHE, as well as a record high turnover frequency of 1.35×10⁵ h⁻¹, much higher than those of Ni-N₄ SAC, and being one of the best reported electrocatalysts for CO₂-to-CO conversion to date.     

Hierarchical Integration of Organic Core/Shell Microwires for Advanced Photonics

The combination of multiple components or structures into integrated micro/nanostructures for practical application has been pursued for many years. Herein, a series of hierarchical organic microwires with branch, core/shell (C/S), and branch C/S structures are successfully constructed based on organic charge transfer (CT) cocrystals with structural similarity and physicochemical tunability. By regulating the intermolecular CT interaction, single microwires and branch microstructures can be integrated into the C/S and branch C/S structures, respectively. Significantly, the integrated branch C/S microwires, with multicolor waveguide behavior and branch structure multichannel waveguide output characteristics, can function as an optical logic gate with multiple encoding features. This work provides useful insights for creating completely new types of organic microstructures for integrated optoelectronics.     

含氮金属有机框架衍生的铜基催化剂电催化还原二氧化碳

With the development of human society and economy, the demand for energy resources has also increased rapidly. However, the use of traditional fossil energy leads to high amounts of carbon dioxide emissions, causing severe greenhouse effects. This, in turn, triggers a series of environmental problems. Harnessing renewable energy such as solar energy, wind energy, and hydropower to replace the traditional energy sources is very urgent. Conversion CO₂ into value-added fuels and chemicals could be a useful strategy to mitigate the current energy and environmental crisis. It is well known that Cu-based materials are good electrocatalysts for the electrochemical reduction of CO₂ (ECR-CO₂). However, they suffer from some disadvantages such as high overpotential and poor selectivity and durability. Therefore, the development of copper based electrocatalysts with high activity and selectivity is essential.     

In Situ Growth of Hierarchical Ni-Mn-O Solid Solution on a Flexible and Porous Ni Electrode for High-Performance All-Solid-State Asymmetric Supercapacitors

To endow all-solid-state asymmetric supercapacitors with high energy density, cycling stability, and flexibility, we design a binder-free supercapacitor electrode by in situ growth of well-distributed broccoli-like Ni_0.75Mn_0.25O/C solid solution arrays on a flexible and three-dimensional Ni current collector (3D-Ni). The electrode consists of a bottom layer of compressed but still porous Ni foam with excellent flexibility and high electrical conductivity, an intermediate layer of interconnected Ni nanoparticles providing a large specific surface area for loading of active substances, and a top layer of vertically aligned mesoporous nanosheets of a Ni_0.75Mn_0.25O/C solid solution. The resultant 3D-Ni/Ni_0.75Mn_0.25O/C cathode exhibits a specific capacitance of 1657.6 mF cm⁻² at 1 mA cm⁻² and shows no degradation of the capacitance after 10 000 cycles at 3 mA cm⁻². The assembled 3D-Ni/Ni_0.75Mn_0.25O/C//activated carbon asymmetric supercapacitor has a high specific capacitance of 797.7 mF cm⁻² at 2 mA cm⁻² and an excellent cycling stability with 85.3 % of capacitance retention after 10 000 cycles at a current density of 3 mA cm⁻². The energy density and power density of the asymmetric supercapacitor are up to 6.6 mW h cm⁻³ and 40.8 mW cm⁻³, respectively, indicating a fairly promising future of the flexible 3D-Ni/Ni_0.75Mn_0.25O/C electrode for efficient energy storage applications.     

Controlled Synthesis of a Vacancy‐Defect Single‐Atom Catalyst for Boosting CO2 Electroreduction

The reaction of precursors containing both nitrogen and oxygen atoms with Ni^II under 500 °C can generate a N/O mixing coordinated Ni‐N₃O single‐atom catalyst (SAC) in which the oxygen atom can be gradually removed under high temperature due to the weaker Ni?O interaction, resulting in a vacancy‐defect Ni‐N₃‐V SAC at Ni site under 800 °C. For the reaction of Ni^II with the precursor simply containing nitrogen atoms, only a no‐vacancy‐defect Ni‐N₄ SAC was obtained. Experimental and DFT calculations reveal that the presence of a vacancy‐defect in Ni‐N₃‐V SAC can dramatically boost the electrocatalytic activity for CO₂ reduction, with extremely high CO₂ reduction current density of 65 mA cm^?2 and high Faradaic efficiency over 90 % at ?0.9 V vs. RHE, as well as a record high turnover frequency of 1.35×10⁵ h^?1, much higher than those of Ni‐N₄ SAC, and being one of the best reported electrocatalysts for CO₂‐to‐CO conversion to date.     

In Situ Nitrogen Functionalization of 2D-Ti3C2Tx-MXenes for High-Performance Zn-Ion Supercapacitor

Zinc (Zn) ion supercapacitors (ZISCs) have attracted considerable attention as a viable energy storage technology because they are cost-effective, safe, and environmentally friendly. However, cathode materials with suitable properties are rare and need to be explored. In this regard, metal carbides (MXenes) are a good choice for capacitive energy storage, but they exhibit low capacitance. The energy storage performance of MXenes can be bossed using functionalization with heteroatom doping, e.g., nitrogen (N), to simultaneously modify ZISCs’ fundamental characteristics and electrochemical properties. Herein, we present an in-situ N-functionalization of Ti₃C₂T_x-MXene via a hydrothermal reaction with urea (denoted as N-Ti₃C₂T_x-MXene). N-functionalization into Ti₃C₂T_x-MXene raised Ti₃C₂T_x-MXene’s interlayer spacing and boosted the Zn-ion storage in 1 M ZnSO₄ electrolyte. The N-Ti₃C₂T_x-MXene electrode delivered an excellent specific capacitance of 582.96 F/g at 1 A/g and retained an outstanding cycle stability of 94.62% after 5000 cycles at 10 A/g, which is 1.8 times higher than pristine Ti₃C₂T_x-MXene at identical conditions. Moreover, the N-Ti₃C₂T_x-MXene//Zn device demonstrated a maximum capacitance of 153.55 F/g at 1 A/g, retained 92% of its initial value after 5000 cycles, and its Coulombic efficiency was ~100%. This strategy considerably reduced Ti₃C₂T_x-MXene nanosheet restacking and aggregation and enhanced electrochemical performance. Further, this research elucidated N-Ti₃C₂T_x-MXene’s charge–storage process and offered a fresh approach to the rational design of novel electrode materials for ZISCs.     

Pt-Au/CNT@TiO2作为甲醇燃料电池的高活性阳极催化剂

以TiO2包覆的多壁碳纳米管(CNT@TiO2)为载体,Pt和Au为活性物质,采用沉积紫外光催化还原法制备出高活性的甲醇阳极电催化剂Pt-Au/CNT@TiO2,并采用X射线衍射、透射电镜和X射线光电子能谱对催化剂样品的物化特征进行表征.催化剂的抗毒性能用循环伏安和交流阻抗测试来表征.结果表明,粒径为2～3nm的Pt-...     

In Situ Preparation of CsPbBr3@CsPb2Br5 Composite Assisted with Water as a Highly Efficient and Stable Catalyst for Photothermal CO2 Hydrogenation

Lead halide perovskite has triggered a lot of research due to its superior optical properties. However, halide perovskite materials have poor environmental stabilities and are easily affected by external factors such as water and heat, resulting in structural decomposition and performance failure. Contrary to this commonplace concept, it is found that CsPbBr₃ (CPB) can convert to CsPb₂Br₅ (CP2B5) partially when meeting a small amount of water, and the CsPbBr₃@CsPb₂Br₅ (CPB@CP2B5) composite is synthesized by an in situ method accordingly. The CPB@CP2B5 composite shows an enhanced catalytic performance compared with pure CPB, as well as a dramatically synergistic effect of photo and thermal for catalytic CO₂ hydrogenation. The CO production rate of CPB@CP2B5 is determined as 69 μmol g⁻¹ h⁻¹ under light irradiation at 200 °C, which is 156.8 and 43.4 times higher than that under pure photo (0.44 μmol g⁻¹ h ⁻¹) and pure thermal (1.59 μmol g⁻¹ h ⁻¹) condition, respectively. Meanwhile, the CPB@CP2B5 sample is also stable, which shows no significant decline in the catalytic activity during 8 cycles of repeated experiments. The probable mechanism is explored by utilizing a series of in situ characterizations.     

BaF2/La2O3催化剂上甲烷氧化偶联反应活性氧物种的原位红外光谱

用原位红外光谱研究了BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.结果表明,催化剂经O2预吸附后,在1 108~1 118 cm-1处出现超氧物种O2-的O-O键伸缩振动峰.经18O2同位素交换实验后,原1 108~1 118 cm-1处谱峰的强度减弱,同时在1 086和1 051 cm-1处出现(O18O)-物种和18O2-物种的吸收峰.同位素交换实验进一步确证了1 108~1 118cm-1处谱峰确为O2-物种的吸收峰.在700℃下,O2-物种能够活化CH4生成C2H4,而且O2-物种的消耗量和C2H4的生成量呈很好的消长对应关系.超氧物种O2-是BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.     

Methanol Synthesis at a Wide Range of H2/CO2 Ratios over a Rh‐In Bimetallic Catalyst

There is increasing interest in capturing H₂ generated from renewables with CO₂ to produce methanol. However, renewable hydrogen production is expensive and in limited quantity compared to CO₂. Excess CO₂ and limited H₂ in the feedstock gas is not favorable for CO₂ hydrogenation to methanol, causing low activity and poor methanol selectivity. Now, a class of Rh‐In catalysts with optimal adsorption properties to the intermediates of methanol production is presented. The Rh‐In catalyst can effectively catalyze methanol synthesis but inhibit the reverse water‐gas shift reaction under H₂‐deficient gas flow and shows the best competitive methanol productivity under industrially applicable conditions in comparison with reported values. This work demonstrates a strong potential of Rh‐In bimetallic composition, from which a convenient methanol synthesis based on flexible feedstock compositions (such as H₂/CO₂ from biomass derivatives) with lower energy cost can be established.