Development and Investigation of a NASICON‐Type High‐Voltage Cathode Material for High‐Power Sodium‐Ion Batteries

Herein, we introduce a 4.0 V class high‐voltage cathode material with a newly recognized sodium superionic conductor (NASICON)‐type structure with cubic symmetry (space group P2₁3), Na₃V(PO₃)₃N. We synthesize an N‐doped graphene oxide‐wrapped Na₃V(PO₃)₃N composite with a uniform carbon coating layer, which shows excellent rate performance and outstanding cycling stability. Its air/water stability and all‐climate performance were carefully investigated. A near‐zero volume change (ca. 0.40 %) was observed for the first time based on in situ synchrotron X‐ray diffraction, and the in situ X‐ray absorption spectra revealed the V^3.2+/V^4.2+ redox reaction with high reversibility. Its 3D sodium diffusion pathways were demonstrated with distinctive low energy barriers. Our results indicate that this high‐voltage NASICON‐type Na₃V(PO₃)₃N composite is a competitive cathode material for sodium‐ion batteries and will receive more attention and studies in the future.     

A Cation and Anion Dual Doping Strategy for the Elevation of Titanium Redox Potential for High-Power Sodium-Ion Batteries

Titanium-based polyanions have been intensively investigated for sodium-ion batteries owing to their superior structural stability and thermal safety. However, their low working potential hindered further applications. Now, a cation and anion dual doping strategy is used to boost the redox potential of Ti-based cathodes of Na₃Ti_0.5V_0.5(PO₃)₃N as a new cathode material for sodium ion batteries. Both the Ti³⁺/Ti⁴⁺ and V³⁺/V⁴⁺ redox couples are reversibly accessed, leading to two distinctive voltage platforms at ca. 3.3 V and ca. 3.8 V, respectively. The remarkably improved cycling stability (86.3 %, 3000 cycles) can be ascribed to the near-zero volume strain in this unusual cubic symmetry, which has been demonstrated by in situ synchrotron-based X-ray diffraction. First-principles calculations reveal its well-interconnected 3D Na diffusion pathways with low energy barriers, and the two-sodium-extracted intermediate NaTi_0.5V_0.5(PO₃)₃N is also a stable phase according to formation energy calculations.     

A Cation and Anion Dual Doping Strategy for the Elevation of Titanium Redox Potential for High‐Power Sodium‐Ion Batteries

Titanium‐based polyanions have been intensively investigated for sodium‐ion batteries owing to their superior structural stability and thermal safety. However, their low working potential hindered further applications. Now, a cation and anion dual doping strategy is used to boost the redox potential of Ti‐based cathodes of Na₃Ti_0.5V_0.5(PO₃)₃N as a new cathode material for sodium ion batteries. Both the Ti³⁺/Ti⁴⁺ and V³⁺/V⁴⁺ redox couples are reversibly accessed, leading to two distinctive voltage platforms at ca. 3.3 V and ca. 3.8 V, respectively. The remarkably improved cycling stability (86.3 %, 3000 cycles) can be ascribed to the near‐zero volume strain in this unusual cubic symmetry, which has been demonstrated by in situ synchrotron‐based X‐ray diffraction. First‐principles calculations reveal its well‐interconnected 3D Na diffusion pathways with low energy barriers, and the two‐sodium‐extracted intermediate NaTi_0.5V_0.5(PO₃)₃N is also a stable phase according to formation energy calculations.     

A High-Energy NASICON-Type Na3.2MnTi0.8V0.2(PO4)3 Cathode Material with Reversible 3.2-Electron Redox Reaction for Sodium-Ion Batteries

Na superionic conductor (NASICON) structured cathode materials with robust structural stability and large Na⁺ diffusion channels have aroused great interest in sodium-ion batteries (SIBs). However, most of NASICON-type cathode materials exhibit redox reaction of no more than three electrons per formula, which strictly limits capacity and energy density. Herein, a series of NASICON-type Na_3+xMnTi_1−xV_x(PO₄)₃ cathode materials are designed, which demonstrate not only a multi-electron reaction but also high voltage platform. With five redox couples from V^5+/4+ (≈4.1 V), Mn^4+/3+ (≈4.0 V), Mn^3+/2+ (≈3.6 V), V^4+/3+ (≈3.4 V), and Ti^4+/3+ (≈2.1 V), the optimized material, Na_3.2MnTi_0.8V_0.2(PO₄)₃, realizes a reversible 3.2-electron redox reaction, enabling a high discharge capacity (172.5 mAh g⁻¹) and an ultrahigh energy density (527.2 Wh kg⁻¹). This work sheds light on the rational construction of NASICON-type cathode materials with multi-electron redox reaction for high-energy SIBs.     

Towards Highly Stable Storage of Sodium Ions: A Porous Na3V2(PO4)3/C Cathode Material for Sodium‐Ion Batteries

A porous Na₃V₂(PO₄)₃ cathode material coated uniformly with a layer of approximately 6 nm carbon has been synthesized by the sol–gel method combined with a freeze‐drying process. The special porous morphology and structure significantly increases the specific surface area of the material, which greatly enlarges the contact area between the electrode and electrolyte, and consequently supplies more active sites for sodium ions. When employed as a cathode material of sodium‐ion batteries, this porous Na₃V₂(PO₄)₃/C exhibits excellent rate performance and cycling stability; for instance, it shows quite a flat potential plateau at 3.4 V in the potential window of 2.7–4.0 V versus Na⁺/Na and delivers an initial capacity as high as 118.9 and 98.0 mA h g^?1 at current rates of 0.05 and 0.5 C, respectively, and after 50 cycles, a good capacity retention of 92.7 and 93.6 % are maintained. Moreover, even when the discharge current density is increased to 5 C (590 mA g^?1), an initial capacity of 97.6 mA h g^?1 can still be achieved, and an exciting capacity retention of 88.6 % is obtained after 100 cycles. The good cycle performance, excellent rate capability, and moreover, the low cost of Na₃V₂(PO₄)₃/C suggest that this material is a promising cathode for large‐scale sodium‐ion rechargeable batteries.     

Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries

A Na₃V₂(PO₄)₃ sample coated uniformly with a layer of 6 nm carbon has been successfully synthesized by a one-step solid state reaction. This material shows two flat voltage plateaus at 3.4 V vs. Na⁺/Na and 1.63 V vs. Na⁺/Na in a nonaqueous sodium cell. When the Na₃V₂(PO₄)₃/C sample is tested as a cathode in a voltage range of 2.7-3.8 V vs. Na⁺/Na, its initial charge and discharge capacities are 98.6 and 93 mAh/g. The capacity retention of 99% can be achieved after 10 cycles. The electrode shows good cycle performance and moderate rate performance. When it is tested as an anode in a voltage range of 1.0-3.0 V vs. Na⁺/Na, the initial reversible capacity is 66.3 mAh/g and the capacity of 59 mAh/g can be maintained after 50 cycles. These preliminary results indicate that Na₃V₂(PO₄)₃/C is a new promising material for sodium ion batteries.     

An Aqueous Symmetric Sodium‐Ion Battery with NASICON‐Structured Na3MnTi(PO4)3

A symmetric sodium‐ion battery with an aqueous electrolyte is demonstrated; it utilizes the NASICON‐structured Na₃MnTi(PO₄)₃ as both the anode and the cathode. The NASICON‐structured Na₃MnTi(PO₄)₃ possesses two electrochemically active transition metals with the redox couples of Ti⁴⁺/Ti³⁺ and Mn³⁺/Mn²⁺ working on the anode and cathode sides, respectively. The symmetric cell based on this bipolar electrode material exhibits a well‐defined voltage plateau centered at about 1.4 V in an aqueous electrolyte with a stable cycle performance and superior rate capability. The advent of aqueous symmetric sodium‐ion battery with high safety and low cost may provide a solution for large‐scale stationary energy storage.     

High-Voltage Polyanion Positive Electrode Materials

High-voltage generation (over 4 V versus Li⁺/Li) of polyanion-positive electrode materials is usually achieved by Ni³⁺/Ni²⁺, Co³⁺/Co²⁺, or V⁴⁺/V³⁺ redox couples, all of which, however, encounter cost and toxicity issues. In this short review, our recent efforts to utilize alternative abundant and less toxic Fe³⁺/Fe²⁺ and Cr⁴⁺/Cr³⁺ redox couples are summarized. Most successful examples are alluaudite Na₂Fe₂(SO₄)₃ (3.8 V versus sodium and hence 4.1 V versus lithium) and β₁-Na₃Al₂(PO₄)₂F₃-type Na₃Cr₂(PO₄)₂F₃ (4.7 V versus sodium and hence 5.0 V versus lithium), where maximizing ΔG by edge-sharing Fe³⁺-Fe³⁺ Coulombic repulsion and the use of the 3d²/3d³ configuration of Cr⁴⁺/Cr³⁺ are essential for each case. Possible exploration of new high-voltage cathode materials is also discussed.     

Single-Ion Conducting Polymer Electrolyte for Superior Sodium-Metal Batteries

Sodium-metal batteries (SMBs) are considered a potential alternative to high-energy lithium-metal batteries (LMBs). However, the high reactivity of metallic sodium towards common liquid organic electrolytes renders such battery technology particularly challenging. Herein, we propose a multi-block single-ion conducting polymer electrolyte (SIPE) doped with ethylene carbonate as suitable electrolyte system for SMBs. This novel SIPE provides a very high ionic conductivity (2.6 mS cm⁻¹) and an electrochemical stability window of about 4.1 V at 40 °C, enabling stable sodium stripping and plating and excellent rate capability of Na||Na₃V₂(PO₄)₃ cells up to 2 C. Remarkably, such cells provide a capacity retention of about 85 % after 1,000 cycles at 0.2 C thanks to the very high Coulombic efficiency (99.9 %), resulting from an excellent interfacial stability towards sodium metal and the Na₃V₂(PO₄)₃ cathode.     

Sodium vanadium nitridophosphate Na3V(PO3)3N as a high-voltage positive electrode material for Na-ion and Li-ion batteries

We report the preparation and electrochemical properties of Na₃V(PO₃)₃N made by ammonolysis. Na₃V(PO₃)₃N is reversibly oxidized to Na₂V(PO₃)₃N at high voltage (4.0 V vs. Na⁺/Na⁰ and 4.1 V vs. Li⁺/Li⁰) with an unusually small difference in the insertion/extraction voltage between both alkali metal reference electrodes. In both cases, the voltage hysteresis is extremely small (~ 0.035 V vs. sodium and ~ 0.065 V vs. lithium), which suggests facile migration of alkali cations within the structure. Further oxidation to NaV(PO₃)₃N is predicted to occur beyond the voltage stability window of the electrolytes.     

Ruthenium‐Oxide‐Coated Sodium Vanadium Fluorophosphate Nanowires as High‐Power Cathode Materials for Sodium‐Ion Batteries

Sodium‐ion batteries are a very promising alternative to lithium‐ion batteries because of their reliance on an abundant supply of sodium salts, environmental benignity, and low cost. However, the low rate capability and poor long‐term stability still hinder their practical application. A cathode material, formed of RuO₂‐coated Na₃V₂O₂(PO₄)₂F nanowires, has a 50 nm diameter with the space group of I4/mmm. When used as a cathode material for Na‐ion batteries, a reversible capacity of 120 mAh g^?1 at 1 C and 95 mAh g^?1 at 20 C can be achieved after 1000 charge–discharge cycles. The ultrahigh rate capability and enhanced cycling stability are comparable with high performance lithium cathodes. Combining first principles computational investigation with experimental observations, the excellent performance can be attributed to the uniform and highly conductive RuO₂ coating and the preferred growth of the (002) plane in the Na₃V₂O₂(PO₄)₂F nanowires.     

Ascorbic Acid‐Assisted Synthesis of Mesoporous Sodium Vanadium Phosphate Nanoparticles with Highly sp2‐Coordinated Carbon Coatings as Efficient Cathode Materials for Rechargeable Sodium‐Ion Batteries

Herein, mesoporous sodium vanadium phosphate nanoparticles with highly sp²‐coordinated carbon coatings (meso‐Na₃V₂(PO₄)₃/C) were successfully synthesized as efficient cathode material for rechargeable sodium‐ion batteries by using ascorbic acid as both the reductant and carbon source, followed by calcination at 750 °C in an argon atmosphere. Their crystalline structure, morphology, surface area, chemical composition, carbon nature and amount were systematically explored. Following electrochemical measurements, the resultant meso‐Na₃V₂(PO₄)₃/C not only delivered good reversible capacity (98 mAh g^?1 at 0.1 A g^?1) and superior rate capability (63 mAh g^?1 at 1 A g^?1) but also exhibited comparable cycling performance (capacity retention: ≈74 % at 450 cycles at 0.4 A g^?1). Moreover, the symmetrical sodium‐ion full cell with excellent reversibility and cycling stability was also achieved (capacity retention: 92.2 % at 0.1 A g^?1 with 99.5 % coulombic efficiency after 100 cycles). These attributes are ascribed to the distinctive mesostructure for facile sodium‐ion insertion/extraction and their continuous sp²‐coordinated carbon coatings, which facilitate electronic conduction.     

Li3V2(PO4)3/C和Li2.5Na0.5V2(PO4)3/C的结构和电化学性能的比较研究

采用溶胶-凝胶法合成了锂离子正极材料Li3V2(PO4)3/C(LVP/C)及Li2.5Na0.5V2(PO4)3/C,并用XRD、循环伏安及交流阻抗等方法,研究了大量Na+掺杂对材料结构和电化学性能影响。结果表明,大量钠离子的掺杂会使LVP结构由单斜向菱方转变。掺杂化合物Li2.5Na0.5V2(PO4)3/C在0.5 C充电1 C放电时,首次放电容量为118 mAh.g-1,50次循环后容量保持率为92.4%,并发现与单斜LVP存在多个放电平台不同,Li2.5Na0.5V2(PO4)3/C仅在3.7 V处有一个放电平台。     

A new high voltage alluaudite sodium battery insertion material

Large-scale stationary storage forms a key sector that can be economically served by sodium-ion batteries. In realizing practical sodium-ion batteries, discovery and development of novel cathodes is essential. In this spirit, alluaudite-type Na₂Fe₂(SO₄)₃ was reported in 2014 to have the highest Fe³⁺/Fe²⁺ redox potential (～3.8 V vs. Na). This finding led to reports on various PO₄^3? and SO₄^2? based alluaudite compounds exhibiting high energy densities. In 2017, MoO₄^2? based alluaudite, Na_2.67Mn_1.67(MoO₄)₃, was found as a 3.45 V cathode material. Exploring molybdenum chemistry further, this work reports alluaudite type Na_3.36Co_1.32(MoO₄)₃ (NCMo) as a novel versatile electroactive cathode for Li-ion and Na-ion batteries. It was synthesized by a wet solution-combustion route with a restricted annealing duration of 1 min at 600 °C. Calorimetric study revealed the formation enthalpy from component oxides (ΔH°_f,ox = ?575.49 ± 7.75 kJ/mol) to be highly exothermic. Unlike the sulfate class of alluaudites, this material is highly stable in air and moisture (ΔH_ds = 537.42 ± 0.78 kJ/mol). Having an ionic conductivity of 6.065 × 10^?8 S/cm (at 50 °C), it offers a pseudo two-dimensional Na⁺ migration pathway. Without any material optimization, NCMo was found to work as a high-voltage insertion cathode (ca. 4.0 V vs. Na/Na⁺ and 4.1 V vs. Li/Li⁺) in sync with theoretically predicted potential of 3.98 V (vs. Na/Na⁺). Ex-situ X-ray diffraction and photoelectron spectroscopy studies revealed the occurrence of solid-solution redox mechanism solely involving Co³⁺/Co²⁺ redox centre. It benchmarks Na_3.36Co_1.32(MoO₄)₃ as a novel electrochemically active Mo-based alluaudite-type polyanionic cathode insertion material.     

Effects of phenolic resin on the electrochemical performance of Li3V2(PO4)3/C cathode materials

As a kind of lithium-ion battery cathode material, monoclinic lithium vanadium phosphate/carbon Li₃V₂(PO₄)₃/C was synthesized by adopting phenolic resin as carbon source, both for reducing agent and coating material. The crystal structure and morphology of the samples were characterized through X-ray diffraction (XRD) and scanning electron microscope (SEM). Galvanostatic charge-discharging experiments and electrochemical impedance spectrum (EIS) were utilized to determine the electrochemical insertion properties of the samples. XRD data revealed that phenolic resin does not change the crystal structure of Li₃V₂(PO₄)₃/C. Furthermore, the morphology of grains and the electronic conductivity of Li₃V₂(PO₄)₃/C were improved. Galvanostatic charge-discharging and EIS results showed that the optimal electrochemical properties and the minimum charge-transfer resistance of Li₃V₂(PO₄)₃/C can be reached when added by 5 wt.% of redundant carbon (except the carbon needed to reduce V⁵⁺ to V³⁺). The initial discharge capacity is 128.4 mAh g^?1 at 0.2 C rate and 101.2 mAh g^?1 at 5 C in the voltage range of 3.0～4.3 V.     

Designed One-Pot Strategy for Dual-Carbon-Protected Na3V2(PO4)3 Hybrid Structure as High-Rate and Ultrastable Cathode for Sodium-Ion Batteries

Sodium-ion batteries have attracted tremendous attention due to their much lower cost and similar working principle compared with lithium-ion batteries, which have been invited great expectation as energy storage devices in grid-level applications. The sodium superionic conductor Na₃V₂(PO₄)₃ has been considered as a promising cathode candidate; however, its intrinsic low electronic conductivity results in poor rate performance and unsatisfactory cycling performance, which severely impedes its potential for practical applications. Herein, we developed a facile one-pot strategy to construct dual carbon-protected hybrid structure composed of carbon coated Na₃V₂(PO₄)₃ nanoparticles embedded with carbon matrix with excellent rate performance, superior cycling stability and ultralong lifespan. Specifically, it can deliver an outstanding rate performance with a 51.5 % capacity retention from 0.5 to 100 C and extraordinary cycling stability of 80.86 % capacity retention after 6000 cycles at the high rate of 20 C. The possible reasons for the enhanced performance could be understood as the synergistic effects of the strengthened robust structure, facilitated charge transfer kinetics, and the mesoporous nature of the Na₃V₂(PO₄)₃ hybrid structure. This work provides a cost-effective strategy to effectively optimize the electrochemical performance of a Na₃V₂(PO₄)₃ cathode, which could contribute to push forward the advance of its practical applications.     

Li3V2(PO4)3/C的P123辅助流变相法制备及电化学性能

以V₂O₅、NH₄H₂PO₄、LiOH、柠檬酸、三嵌段聚合物表面活性剂P123为原料, 用流变相(RPR)法制备了Li₃V₂(PO₄)₃/C正极材料. 用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等方法表征, 结果表明: 材料为单一纯相的单斜晶体结构, 颗粒均匀并呈现珊瑚结构; 恒流充放电, 循环伏安(CV)及电化学交流阻抗(EIS)等电化学性能测试表明, 采用P123 辅助合成材料电化学性能明显优于未采用P123 辅助合成材料. 3.0-4.3 V放电区间, 0.1C充放电下P123 辅助合成Li₃V₂(PO₄)₃/C材料首次放电比容量为129.8 mAh·g^-1, 经过50 次循环后容量只衰减0.9%; 倍率性能及循环性能优异, 1C、10C、25C的首次放电比容量分别为128.2、121.3、109.1 mAh·g^-1, 50次循环后容量保持率分别为99.1%, 96.9%, 90.7%. 这归因于三嵌段聚合物P123 作为分散剂的同时也作为有机碳源在颗粒表面及间隙形成碳网络, 有利于材料导电率的改善, 降低了其电荷转移阻抗, 减小了电极充放电过程的极化现象.     

LiVPO4F/Li3V2(PO4)3 nanostructured composite cathode materials prepared via mechanochemical way

Single-phase LiVPO₄F and LiVPO₄F/Li₃V₂(PO₄)₃ nanostructured composite cathode materials were prepared by heating of the VPO₄?+?LiF mechanochemically activated mixture to 700 °C and subsequent quick or slow cooling to room temperature, respectively. The formation of the composites was proved by a combination of different physico-chemical methods, including XRD, FTIR, ⁶Li and ³¹P NMR, SEM, TEM, and HRTEM. It has been shown that in the composites LiVPO₄F and Li₃V₂(PO₄)₃ nanocrystals well inset into each other resulting in the nanodomain composite formation. Charge–discharge curves of the composites have a sloping profile both in the high-voltage (3.0–4.5 V) and in the low-voltage (1.3–2.5 V) ranges, noticeably different from plateaus for a phase-pure LiVPO₄F, thus indicating a probable change of a two-phase regime of lithium intercalation for a single-phase one. Enhanced rate capability of the LiVPO₄F/Li₃V₂(PO₄)₃ composites is associated with their microstructure and high ionic conductivity of Li₃V₂(PO₄)₃.     

水热-溶胶-凝胶法合成多壁碳纳米管-Na3V2（PO4）3复合物及其作为锂离子电池正极材料的性能

采用水热和溶胶-凝胶相结合的方法,制备了具有良好电化学性能的新型多壁碳纳米管-Na₃V₂（PO₄）₃（MWCNT-NVP）复合材料（MWCNT的质量分数为8.74%）. 通过场发射扫描电子显微镜表征可知,MWCNT分散在NVP纳米颗粒之间,并起到“电子导电线”的作用. 与纯Na₃V₂（PO₄）₃相比,MWCNT-NVP具有更高的比容量和更优异的循环性能. 在0.2C（35.2 mA·g^-1）的电流密度下,3.0-4.5 V的电压范围内,MWCNT-NVP的初始比容量为82.2 mAh·g^-1. 循环100次以后,比容量为72.3 mAh·g^-1. 在1.0-3.0 V充放电时,MWCNT-NVP的初始容量为100.6 mAh·g^-1. 100次循环以后,其容量保持率高达90%. 同时,交流阻抗测试表明,由于MWCNT的存在,MWCNT-NVP的导电性有了显著的提高. 以上结果表明,MWCNT-NVP是一种良好的锂离子电池电极材料.     

NASICON型Na4FeV(PO4)3的合成、晶体结构和电化学性能

采用高温熔盐法制备了NASICON型Na_4Fe V(PO_4)_3单晶。单晶X射线衍射数据分析表明,Na_4Fe V(PO_4)_3属于六方R3c空间群,单胞参数为a=b=0.878 17(4) nm,c=2.170 1(2) nm,Z=6,V=1.449 31(18) nm~3。该磷酸盐属于典型的NASICON结构,由PO_4四面体和Fe/VO_6八面体共顶点组成三维框架结构,提供多维的Na~+传输通道,2种不同类型Na~+位于框架的间隙。以Na_4Fe V(PO_4)_3/C粉末样品作为钠电池正极材料并以金属钠为对电极制备电池时,电化学测试结果表明其具有较高的容量。