Preparation and characterization of MNPs–PhSO3H as a heterogeneous catalyst for the synthesis of benzo[b]pyran and pyrano[3,2-c]chromenes

Research on Chemical Intermediates - In this study, an efficient and novel procedure has been reported for loading sulfanilic acid on the surface of magnetite Fe3O4 nanoparticles using...     

α-Fe_2O_3 nanoparticles:An efficient,inexpensive catalyst for the one-pot preparation of 3,4-dihydropyrano[c]chromenes

This paper describes the combustion synthesis ofα-Fe₂O₃ nanopowder at much lower temperature and its catalytic activity for the one-pot preparation of 3,4-dihydropyrano[c]chromenes.The combustion derivedα-Fe₂O₃ nanopowder was characterized by powder X-ray diffraction（PXRD）,Braunauer,Emmett and Teller（BET） surface area,scanning electron microscopy（SEM） and Fourier transform infrared spectroscopy（FTIR）.Highly efficient,three-component condensation of aromatic aldehyde,malanonitrile and 4- hydroxycoumarin catalyzed byα-Fe₂O₃ nanoparticles at room temperature is described.The method offers an excellent alternative to the synthesis of 3,4-dihydropyrano[c]chromenes.The reactions are rapid,clean,and the products with good yield and high purity.     

Silica-supported LiHSO4 as a highly efficient, heterogeneous and reusable catalytic system for the solvent-free synthesis of β-enaminones and β-enamino esters

A highly efficient, simple and green procedure for the synthesis of β-enaminones and β-enamino esters is described. The reaction of aromatic and aliphatic amines with β-dicarbonyl compounds using catalytic amount of silica-supported LiHSO₄ (LiHSO₄/SiO₂) under solvent-free conditions at 80 °C affords the title compounds in high to excellent yields and in short reaction times.     

Zeolite nanoparticles (H-ZSM5) as a highly efficient,green, and reusable heterogeneous catalyst for selective oxidation of sulfides to sulfoxides under mild conditions

H-ZSM5 is applied as an efficient, highly reusable, and heterogeneous catalyst for the oxidation of sulfides to sulfoxides using 30% H₂O₂ under solvent-free conditions at room temperature. A variety of aromatic and aliphatic sulfides with different functional groups were successfully oxidized with good to excellent yields in short reaction times. The catalyst can be easily recovered by simple filtration and recycled for several consecutive runs without any significant loss of its catalytic activity.     

Fe（HSO4）3： An efficient,heterogeneous and reusable catalyst for the synthesis of 14-aryl- or alkyl- 14H-dibenzo[a,j]xanthenes

Fe（HSO4）3 has been used as an efficient and recyclable catalyst for the one-pot synthesis of 14-aryl- or alkyl-14Hdibenzo[aj]xanthene derivatives by the reaction of 2-naphtol and aldehydes. Different types of aromatic and aliphatic aldehydes are used in the reaction and in all cases the products were obtained in good to excellent yields.     

Decoration of β-CD-ZrO on Fe3O4 magnetic nanoparticles as a magnetically,recoverable and reusable catalyst for the synthesis of 2,3-dihydro-1H-perimidines

Research on Chemical Intermediates - This study focuses on covalent grafting of ZrO to β-CD to prepare an organic–inorganic hybrid material. The synthesised product was successfully...     

Vanadium–Schiff base complex-functionalized SBA-15 as a heterogeneous catalyst: synthesis,characterization and application in pharmaceutical sulfoxidation of sulfids

Research on Chemical Intermediates - VO2(picolinichydrazone) complex as a catalyst was stabilized on a SBA-15 mesoporous silica as a catalytic support by using (3-chloropropyl)triethoxysilane as a...     

Nano TiO_2 as a heterogeneous catalyst in an efficient one-pot three-component Mannich synthesis of β-aminocarbonyls

TiO₂ nanoparticles（TiO₂ NPs） worked as an efficient heterogeneous catalyst in a one-pot,three-component,and solvent free Mannich reaction;producing variousβ-aminocarbonyls in good yields,and with good stereoselectivities.The catalyst was easily separated from the reaction mixture and was recycled four times with no significant loss of its catalytic activity.     

Silica supported perchloric acid （HClO4-SiO2）： A mild,reusable and highly efficient heterogeneous catalyst for the synthesis of amidoalkyl naphthols

An efficient and direct procedure has been developed for the preparation of amidoalkyl naphthols by a one-pot condensation of aryl aldehydes, 2-naphthol and urea or amides, in the presence of HClO4-SiO2 as a heterogeneous catalyst. The reactions were carried out under reflux and solvent-free conditions. The present methodology offers several advantages such as excellent yields, simple procedure, easy work-up and ecofriendly reaction condition. The catalyst is easily prepared, stable, reusable and efficient under the reaction conditions.     

A sulfonate-based Cu(Ⅰ) metal-organic framework as a highly efficient and reusable catalyst for the synthesis of propargylamines under solvent-free conditions

A new highly efficient and reusable Cu(Ⅰ)-MOF has been developed for the synthesis of propargylamine compounds via the three-component reaction of secondary amines,alkynes.and aromatic aldehydes under solvent-free conditions.The desired propargylamines were obtained in good to excellent yields with a low catalyst loading.The catalyst may be recovered and reused for up to 5 cycles without major loss of activity.This protocol has the advantages of excellent yields,low catalyst loading,and catalyst recyclability.     

Uniform copper nanoparticles as an inexpensive and efficient catalyst for synthesis of novel β-carbonyl-1, 2, 3-triazoles in water medium

Copper nanoparticles as an efficient, inexpensive catalyst were prepared via ball milling for synthesis of β-carbonyl 1, 2, 3-triazoles from azido alcohol by click reaction in water. An extensive range of raw materials such as sodium azide, phenacyl bromide, epichlorohydrin, and terminal alkynes were used. Complete reduction of CuO in presence of NaBH₄ was done via ball milling with a ball-to-powder weight ratio of 50:1 under air atmosphere at room temperature. The final copper nanoparticles (Cu NPs) were characterized by SEM, EDX, XRD and FT-IR. The Cu NPs catalyzed one-pot three component synthesis of β-carbonyl 1, 2, 3-triazoles at room temperature with short reaction time and high product yields. The catalyst could be easily recovered and reused in several successive runs.

     

Preparation and characterization of Fe3O4@Cu-β-CD as a hybrid magnetic catalyst for the synthesis of dihydropyrano[2,3-c]pyrazoles in H2O

Research on Chemical Intermediates - Fe3O4@Cu-β-CD is a hybrid composite with high catalytic activity. Easy separation with an external magnet and recyclability are the advantages of this...     

A facile and efficient synthesis of β-amino alcohols using 2,2,2-trifluoroethanol as a metal-free and reusable medium

Trifluoroethanol was used as a reusable catalyst and medium for the ring opening of epoxides using aliphatic and aromatic amines as nucleophile under mild conditions to give the corresponding β-amino alcohols in high yields and regioselectivity.     

One‐pot and green synthesis 1H-pyrazolo[1,2-b]phthalazine-5,10-dione and dihydropyrano[3,2-c]chromene derivatives by Fe3O4@SiO2-imine/phenoxy-Cu(II) as an efficient and reusable catalyst

In the current study, magnetite-silica core–shell nanoparticles modified with Cu-salen complex (Fe₃O₄@SiO₂-imine/phenoxy-Cu(II)) was utilized as a heterogeneous catalyst for the one-pot multicomponent synthesis of 1H-pyrazolo[1,2-b]phthalazine-5,10-dione and dihydropyrano[3,2-c]chromene derivatives under solvent-free conditions, without using any harmful organic reagents/solvent. The current synthetic protocol demonstrates that the reactions proceeds to completing step, leading to the successful synthesis of high purity compounds. Advantages of this method include easy purification, reusability of the catalyst, green and mild procedure and synthesis of new derivatives in high yields within short reaction time.

     

Mild and efficient Winterfeldt oxidation of 1,2,3,4-tetrahydro-γ-carbolines for the synthesis of dihydropyrrolo[3,2-b]-quinolones and pyrrolo[3,2-b]quinolones

The Winterfeldt oxidation (NaOH, DMF, air, rt) of substituted 1,2,3,4-tetrahydro-γ-carbolines has been developed, which provides a convenient and efficient method for the synthesis of the corresponding dihydropyrrolo[3,2-b]quinolones in moderate to excellent yields (38-94%). The generality and substrate scope of this reaction are explored and a possible mechanism is proposed. The results imply that electron-withdrawing groups on N2 of tetrahydro-γ-carbolines and N5-H are necessary. The synthesis of 5 or 7-substituted pyrrolo[3,2-b]quinolones in near quantitative yields was also achieved through deprotection and aromatization of N1-Boc-dihydropyrrolo[3,2-b]quinolones.     

Facile and efficient synthesis of 3,4,5-substituted furan-2(5H)-ones by using β-cyclodextrin as reusable catalyst

3,4,5-Substituted furan-2(5H)-one derivatives were synthesized by using β-cyclodextrin as a catalyst in water via biomimetic approach. β-Cyclodextrin can be recovered and reused.