Anionic–Nonionic Mixed Surfactant Systems: Micellar Interaction and Thermodynamic Behavior

The interactions between an anionic surfactant, viz., sodium dodecylbenzenesulfonate and nonionic surfactants with different secondary ethoxylated chain length, viz., Tergitol 15-S-12, Tergitol 15-S-9, and Tergitol 15-S-7 have been studied in the present article. An attempt has also been made to investigate the effect of ethoxylated chain length on the micellar and the thermodynamic properties of the mixed surfactant systems. The micellar properties like critical micelle concentration (CMC), micellar composition (X_A), interaction parameter (β), and the activity coefficients (f_A and f_NI) have been evaluated using Rubingh's regular solution theory. In addition to micellar studies, thermodynamic parameters like the surface pressure (Π_CMC), surface excess values (Γ_CMC), average area of the monomers at the air–water interface (A_avg), free energy of micellization (ΔG_m), minimum energy at the air–water interface (G_min), etc., have also been calculated. It has been found that in mixtures of anionic and nonionic secondary ethoxylated surfactants, a surfactant containing a smaller ethoxylated chain is favored thermodynamically. Additionally, the adsorption of nonionic species on air/water interface and micelle increases with decreasing secondary ethoxylated chain length. Dynamic light scattering and viscometric studies have also been performed to study the interactions between anionic and nonionic surfactants used.     

Gel- and Solid-State-Structure of Dialanine and Diphenylalanine Amphiphiles: Importance of C⋅⋅⋅H Interactions in Gelation

To investigate the role of the capping group in the solution and solid-state self-assembly of short peptide amphiphiles, dialanine and diphenylalanine have been linked via the N-terminus to a benzene (phenyl) and 3-naphthyl capping groups using three different methylene linkers; (CH₂)_n, n=0–4 for the benezene and 0, 1 and 2 for the naphthalene capping group. Atomic force microscopy (AFM), oscillatory rheology, circular dichroism (CD), and IR analysis have been employed to understand the properties of these peptide-based hydrogels. Several X-ray structures of these short peptide gelators give useful conformational information regarding packing. A comparison of these solid state structures with their gel state properties yielded greater insights into the process of self-assembly in short peptide gelators, particularly in terms of the important role of C⋅⋅⋅H interactions appear to play in determining if a short aromatic peptide does form a gel or not.     

“Salt in a porous matrix” adsorbents: Design of the phase composition and sorption properties

This review formulates the concept of target-oriented synthesis of two-component “salt in a porous matrix” (SPM) adsorbents designed for processes such as gas dewatering, moisture control, heat conversion in adsorption heat pumps, and equilibrium shifting in catalytic reactions. In terms of this approach, the requirements imposed on an ideal adsorbent, which is optimal for a particular application, are initially formulated; then, a material with nearly optimal properties is synthesized. Methods for the target-oriented synthesis of SPM adsorbents with the required properties are considered. The effects of the nature of the salt and the matrix, the salt content, the pore size of the matrix, and the synthesis conditions on the phase composition and adsorption properties of the SPM adsorbents are studied.     

“Design of Experiments” as a Method to Optimize Dynamic Disulfide Assemblies: Cages and Functionalizable Macrocycles

Cyclophanes are a venerable class of macrocyclic and cage compounds that often contain unusual conformations, high strain, and unusual properties. However, synthesis of complex, functional derivatives remains difficult due to low functional group tolerance, high dilution, extreme reaction conditions, and sometimes low yields using traditional stepwise synthetic methods. “Design of experiments” (DOE) is a method employed for the optimization of reaction conditions, and we showcase this approach to generate a dramatic increase in the yield of specific targets from two different self-assembling systems. These examples demonstrate that DOE provides an additional tool in tuning self-assembling, dynamic covalent systems.     

Influences of Electrolytes, Polymers and a Surfactant on Rheological Properties of Bentonite–Water Systems

Characteristic rheological properties, such as viscosity, shear stress, yield point, gel strength and thixotropy, of natural Ca- bentonite and Na-peptized bentonite were studied after adding LiCl, KCl, CaCl2, MgCl2·6H2O electrolytes; (NaPO3)n, polyvinyl pyrolidone (PVP) polymers and an anionic surfactant (linear alkyl benzene sulphonate, LABS). Changes in flow properties under the influence of various additives at different quantities were investigated in these slurries. The experimental results are discussed in terms of bentonite forms, types and concentrations of additives and influence of exchangeable cations. Bivalent and monovalent cations display entirely different rheological properties in two groups of muds. Furthermore, the difference in the degree of activity of PVP polymer on the viscosity of two mud systems depend on the clay mineral structure. The slurry prepared with Na-bentonite contains a minimum number of tactoids and a maximum number of sheet-bearing clay particles, which reduces the surface area of the clay minerals and increases viscosity by adding PVP polymer.     

Design and Synthesis of a Selective Chemosensor for Zn^2＋

A hydroxyl substituted phenolic Schiff base 1, used as sensor for detection of Zn^2＋, was synthesized and investigated. It was found that a strong fluorescence emission was observed when 1 bound to Zn^2＋ in acetonitrile, whereas no fluorescence emission was detected when 1 bound to other metal ions （Fe^2＋, Co^2＋, Ni^2＋, Cu^2＋, Cd^2＋, Hg^2＋, Mg^2＋, Pb^2＋, Ca^2＋, Ba^2＋, Sr^2＋） except for Mg^2＋, for which a weak fluorescence emission was detected in the same condition. Competition experiment showed that no obvious interference was observed in its fluorescence while 1 performed the titration with Zn^2＋ in the different mixtures of metal ions. To understand the site where Zn^2＋ coordinated to the ligand and the mechanism of binding, three other hydroxyl substituted phenolic Schiff bases 2-4 were synthesized and their binding reactions with Zn^2＋were also investigated.     

An Assessment of the Aggregation and Adsorption Behavior of the Sodium Dodecylsulfate–Cetyltrimethylammonium Bromide Mixed Surfactant System in Aqueous Medium

Sodium dodecylsulfate and cetyltrimethylammonium bromide mixtures are important catanionic systems, as they have an inherent tendency to form vesicle structures. Despite extensive studies on the phase behavior and microstructures, there is dearth of basic information on the aggregation and adsorption behavior of this mixed system. In this work the critical micelle concentration, surface tension reduction effectiveness, surface excess, mixed micelle and monolayer compositions, activity coefficients, interaction parameters, counterion binding and Gibbs energy terms of this mixed system are determined by measuring its surface tension and conductance as a function of composition. The dependence of mixed micelle composition on surfactant concentration has been successfully demonstrated.     

“Aggregation-induced emission” of transition metal compounds: Design,mechanistic insights,and applications

In the last decades, compounds with ‘Aggregation-Induced Emission’ (AIE), which are weakly or non-emissive at all in solution but exhibit a strong luminescence in aggregated states, have emerged as an extraordinary breakthrough in the field of luminescent materials, allowing to circumvent ‘Aggregation Caused Quenching’ (ACQ), which in many cases prevents the development of efficient solid-state materials for optoelectronic applications.Since the discovery of AIE, many AIE-active materials have been developed, most of them composed of organic molecules, and thus fluorescent in nature. Although a wide range of applications such as bioimaging, sensing, multi-stimuli responsive materials, and optoelectronic devices have been proposed for this new class of materials, triplet harvesting phosphorescent materials have much longer lifetimes as compared to their singlet harvesting analogues, and for this particular reason, the development of AIE-active phosphorescent materials seems to be a promising strategy from the applications point of view. In this respect, the synthesis of new AIE-active systems including heavy metals that would facilitate the population of low-lying excited triplet states via spin-orbit coupling (SOC), for which the strength increases as the fourth power of atomic number, i.e. Z⁴, is highly desirable. This review covers the design and synthetic strategies used to obtain the AIEgens reported in the literature that contain either d-block metals such as Cu(I), Zn(II), Re(I), Ru(II), Pd(II), Ir(III), Pt(II), Au(I), and Os(IV), describing the mechanisms proposed to explain their AIE. New emerging high-tech applications such as OLEDs, chemical sensors or bioimaging probes proposed for these materials are also discussed in a separate section.     

Raman Optical Activity of N-Acetyl-L-Cysteine in Water and in Methanol: The “Clusters-in-a-Liquid” Model and ab Initio Molecular Dynamics Simulations

Raman and Raman Optical Activity (ROA) spectra of N-acetyl-L-cysteine (NALC), a flexible chiral molecule, were measured in water and in methanol to evaluate the solvent effects. Two different solvation approaches, that is, the DFT based “clusters-in-a-liquid” solvent model and the ab initio molecular dynamics (AIMD) simulations, were applied to simulate the Raman and ROA spectra. Systematic conformational searches were carried out using a recently developed conformational searching tool, CREST, with the inclusion of polarizable continuum model of water and of methanol. The CREST candidates of NALC and the NALC-solvent complexes were re-optimized and their Raman and ROA simulations were done at the B3LYP−D3BJ/def2-TZVP and the B3LYP-aug-cc-pVDZ//cc-pVTZ levels. Also, AIMD simulations, which includes some anharmonic effects and all intermolecular interactions in solution, were performed. By empirically weighting the computed Raman and ROA spectra of each conformer, good agreements with the experimental data were achieved with both approaches, while AIMD offered some improvements in the carbonyl and in the low wavenumber regions over the static DFT approach. The pros and cons of these two different approaches for accounting the solvent effects on Raman and ROA of this flexible chiral system will also be discussed.     

Non-conventional Behavior of a 2,1-Benzazaphosphole: Heterodiene or Hidden Phosphinidene?

Invited for the cover of this issue are Zoltán Benkő, Libor Dostál and co-workers at the University of Pardubice and the Budapest University of Technology and Economics. The image depicts signs for the two different pathways representing the two differing reaction types which were clearly observed for 2,1-benzazaphosphole. Read the full text of the article at 10.1002/chem.202101686 .     

Prediction of the Properties of a Binary Surfactant Mixture of Arlacel‐165 and Myrj‐59 in Aqueous System

Foamability and foam stability, emulsifying power, surface tension, and interfacial tension were investigated for different ratios of binary surfactant system of Arlacel‐165 (glyceryl stearate (and) PEG‐100 stearate) and Myrj‐59 (polyoxyethylene 100 stearate). Among all the ratios tested for their foaming power and foamabilty, the ratios 8:2, 5:5, 4:6, 2:8, and 1:9 of Arlacel‐165 and Myrj‐59 showed the best results. At these ratios, the foaming power and foamability was found to be 100%. The surfactants having foam stability more than 50% can be considered as metastable and those less than 50% are considered as low‐stability foams. In case of surface tension and interfacial tension property measurements, 8:2 and 9:1 showed the best results. At 8:2 and 9:1 of Arlacel‐165 and Myrj‐59, the surface tension was found to be 37.7 dynes/cm and 1.33 dynes/cm respectively at 30°C ambient temperature. Also, 7:3 of this binary mixture was found to exhibit the best emulsifying power among all the ratios tested. At 30°C, the emulsifying property of the binary mixture was 6 hours.     

Design and evaluation of folate-appended methyl-��-cyclodextrin as a new antitumor agent

Methyl-??-cyclodextrin (M-??-CyD) is widely used as a raft disrupting agent through extraction of cholesterol from lipid rafts which are highly expressed in cell membranes of tumor cells, but it does not have tumor cell-selective action. Meanwhile, the widespread use of folic acid (FA) as a tumor-targeting ligand has been known, because folate receptor (FR) overexpresses in various kinds of epithelial tumor cells. In the present study, in order to obtain more tumor cell-selectivity and antitumor activity of M-??-CyD, we designed folate-appended M-??-CyD (FA-M-??-CyD), and evaluated its physicochemical properties and antitumor activity. The ¹H-NMR study demonstrated that FA-M-??-CyD having average degree of substitution of FA (DSF) of 1.0 was prepared. In addition, FA-M-??-CyD (DSF 1.0) was found to be amorphous in a solid state and surface-active. Importantly, FA-M-??-CyD (DSF 1.0) had potent cytotoxicity, compared to M-??-CyD in KB cells, but not in A549 cells. These results suggest that FA-M-??-CyD (DSF 1.0) has the potential as a novel antitumor agent.     

Correlation of Cooperatively Localized Rearrangement on the “Fluidized Domain”of Polymers to Their Nonexponentially Viscoelastic Behavior and Lifetime at Double Aging Processes II: Estimation of Long-term Mechanical Behavior and Lifetime of Polymeric Mate

Three kinds of polymeric materials are taken as example for the verification of linear ex-trapolation method from unified master lines with reduced universal equations on creep and stress relaxation tests. The theoretical values of long-term mechanical behavior and lifetime for a cured epoxide, polypropylene, poly(methyl-methacrylate), and SBR rubber are directly evaluated with the universal equations on reduced creep compliance and reduced stress relax-ation modulus and are compared with their predicted values by the linear extrapolation from the unified master lines of creep and stress relaxation. The results show that the theoretical values of dimensional stability, bearing ability and lifetime are in an excellent agreement with the predicted values, it shows that the linear extrapolation method is more simple and reliable. The dependences of long-term mechanical behaviors and lifetime on the different aging times are discussed.     

The “off-template” problem: synthesis and alkylation of a fused-butyrolactone from d-glucose

The synthesis of a fused-butyrolactone from D-glucose and its stereospecific alkylation in an off-template position is described, together with an unusual silyl protecting group migration.     

Design and efficient synthesis of novel haptens and complete antigens for the AOZ, a toxic metabolite of furazolidone

A good strategy was brought forward for designing efficient haptens and complete antigens for 3-amino-2-oxazolidinone (AOZ). Haptens designed newly were achieved facilely in good yield by using LiCI-N(Et)_3 as new catalysis system,the structure of which was elucidated by spectroscopy analysis,such as NMR and MS.Novel antigens for AOZ were prepared successfully by convenient active ester method.The ratios of haptens 3 and 4 to carrier proteins were proven respectively as 41:1(5a),39:1(6a),11:1(5b) and 9:1(6b) by trinitrobenzene sulfonic acid(TNBS) method.The results of indirect competitive ELISA (ic-ELISA) of antiserums indicated that the haptens with a short unsaturated side chain can evoke specific immune response effectively.     

Activation and Photoinduced Release of Alkynes on a Biomimetic Tungsten Center: The Photochemical Behavior of the W−S-Phoz System

The synthesis and structural determination of four tungsten alkyne complexes coordinated by the bio-inspired S,N-donor ligand 2-(4′,4′-dimethyloxazoline-2′-yl)thiophenolate (S-Phoz) is presented. A previously established protocol that involved the reaction of the respective alkyne with the bis-carbonyl precursor [W(CO)₂(S-Phoz)₂] was used for the complexes [W(CO)(C₂R₂)(S-Phoz)₂] (R=H, 1 a ; Me, 1 b ; Ph, 1 c ). Oxidation with pyridine-N-oxide gave the corresponding W-oxo species [WO(C₂R₂)(S-Phoz)₂] (R=H, 2 a ; Me, 2 b ; Ph, 2 c ). All W-oxo-alkyne complexes ( 2 a , b , c ) were found to be capable of alkyne release upon light irradiation to afford five-coordinate [WO(S-Phoz)₂] ( 3 ). The photoinduced release of the alkyne ligand was studied in detail by in situ ¹H NMR measurements, which revealed correlation of the photodissociation rate constant ( 2 b>2 a>2 c ) with the elongation of the alkyne C≡C bond in the molecular structures. Oxidation of [WO(S-Phoz)₂] ( 3 ) with pyridine-N-oxide yielded [WO₂(S-Phoz)₂] ( 4 ), which shows highly fluxional behavior in solution. Variable-temperature ¹H NMR spectroscopy revealed three isomeric forms with respect to the ligand arrangement versus each other. Furthermore, compound 4 rearranges to tetranuclear oxo compound [W₄O₄(μ-O)₆(S-Phoz)₄] ( 5 ) and dinuclear [{WO(μ-O)(S-Phoz)}₂] ( 6 ) over time. The latter two were identified by single-crystal X-ray diffraction analyses.     

Design and synthesis of cholesterol-bonded fullerene and porphyrin derivatives for the preparation of a self-assembled donor–acceptor system

The cholesterol-bonded fullerene and porphyrin derivatives were synthesised and characterised. Donor–acceptor thin films were self-assembled through the interaction between cyclodextrin and the cholesterol groups on porphyrin and fullerene derivatives. These uniform films were characterised by ultraviolet–visible and fluorescence spectroscopies. Scanning electron microscopy indicated that the self-assembled film had a chain-like fibre structure with the chains having a diameter of about 50 nm. The intermolecular interaction between chromophores and the formation of complex based on cholesterol and cyclodextrin were proven by the quenching of fluorescence due to the charge transfer from porphyrin moieties to the fullerene units.     

Design and Synthesis of a Highly Stable Six-hydrogen-bonded Self-assembly Yellowish Green Electroluminescent Molecular Duplex

Since the first fabrication of thin-layer organic electroluminescent(OEL)device in1987by C.W.Tang et al1.,OEL materials had been of ever increasing interest2,3.While up to now,full-color display has been commercialized with small molecules having different structures.In general,host-dopant systems are often employed in RGB OLEDs.This procedure,however,would lead to relatively poor performance for OEL devices,because of the easy aggregation and crystallization of the dopants,which would…