A Robust,Precious‐Metal‐Free Dye‐Sensitized Photoanode for Water Oxidation: A Nanosecond‐Long Excited‐State Lifetime through a Prussian Blue Analogue

Herein, we establish a simple synthetic strategy affording a heterogeneous, precious metal‐free, dye‐sensitized photoelectrode for water oxidation, which incorporates a Prussian blue (PB) structure for the sensitization of TiO₂ and water oxidation catalysis. Our approach involves the use of a Fe(CN)₅ bridging group not only as a cyanide precursor for the formation of a PB‐type structure but also as an electron shuttle between an organic chromophore and the catalytic center. The resulting hetero‐functional PB‐modified TiO₂ electrode demonstrates a low‐cost and easy‐to‐construct photoanode, which exhibits favorable electron transfers with a remarkable excited state lifetime on the order of nanoseconds and an extended light absorption capacity of up to 500 nm. Our approach paves the way for a new family of precious metal‐free robust dye‐sensitized photoelectrodes for water oxidation, in which a variety of common organic chromophores can be employed in conjunction with CoFe PB structures.     

Photoelectrochemical water oxidation improved by pyridine N-oxide as a mimic of tyrosine-Z in photosystem II

Artificial photosynthesis provides a way to store solar energy in chemical bonds with water oxidation as a major challenge for creating highly efficient and robust photoanodes that mimic photosystem II. We report here an easily available pyridine N-oxide (PNO) derivative as an efficient electron transfer relay between an organic light absorber and molecular water oxidation catalyst on a nanoparticle TiO₂ photoanode. Spectroscopic and kinetic studies revealed that the PNO/PNO⁺˙ couple closely mimics the redox behavior of the tyrosine/tyrosyl radical pair in PSII in improving light-driven charge separation via multi-step electron transfer. The integrated photoanode exhibited a 1 sun current density of 3 mA cm⁻² in the presence of Na₂SO₃ and a highly stable photocurrent density of >0.5 mA cm⁻² at 0.4 V vs. NHE over a period of 1 h for water oxidation at pH 7. The performance shown here is superior to those of previously reported organic dye-based photoanodes in terms of photocurrent and stability.

Stable and high photocurrent for water oxidation was achieved by an organic dye-sensitized photoanode with a pyridine N-oxide derivative as an efficient electron relay between the chromophore and molecular water oxidation catalyst.     

Accelerating photocatalytic hydrogen evolution and pollutant degradation by coupling organic co-catalysts with TiO2

Accelerating the separation efficiency of photoexcited electron-hole pairs with the help of highly active co-catalysts has proven to be a promising approach for improving photocatalytic activity. Thus far, the most developed co-catalysts for semiconductor-based photocatalysis are inorganic materials; the employment of a specific organic molecule as a co-catalyst for photocatalytic hydrogen evolution and pollutant photodegradation is rare and still remains a challenging task. Herein, we report on the use of an organic molecule, oxamide (OA), as a novel co-catalyst to enhance electron-hole separation, photocatalytic H₂ evolution, and dye degradation over TiO₂ nanosheets. OA-modified TiO₂ samples were prepared by a wet chemical route and demonstrated improved light absorption in the visible-light region and more efficient charge transport. The photocatalytic performance of H₂ evolution from water splitting and rhodamine B (RhB) degradation for an optimal OA-modified TiO₂ photocatalyst reached 2.37 mmol g^-1 h^-1 and 1.43 × 10^?2 min^?1, respectively, which were 2.4 and 3.8 times higher than those of pristine TiO₂, respectively. A possible mechanism is proposed, in which the specific π-conjugated structure of OA is suggested to play a key role in the enhancement of the charge transfer and catalytic capability of TiO₂. This work may provide advanced insight into the development of a variety of metal-free organic molecules as functional co-catalysts for improved solar-to-fuel conversion and environmental remediation.     

Density Functional Theory Study of Optical and Electronic Properties of (TiO2)n=5,8,68 Clusters for Application in Solar Cells

A range of solution-processed organic and hybrid organic−inorganic solar cells, such as dye-sensitized and bulk heterojunction organic solar cells have been intensely developed recently. TiO₂ is widely employed as electron transporting material in nanostructured TiO₂ perovskite-sensitized solar cells and semiconductor in dye-sensitized solar cells. Understanding the optical and electronic mechanisms that govern charge separation, transport and recombination in these devices will enhance their current conversion efficiencies under illumination to sunlight. In this work, density functional theory with Perdew-Burke Ernzerhof (PBE) functional approach was used to explore the optical and electronic properties of three modeled TiO₂ brookite clusters, (TiO₂)_n=5,8,68. The simulated optical absorption spectra for (TiO₂)₅ and (TiO₂)₈ clusters show excitation around 200–400 nm, with (TiO₂)₈ cluster showing higher absorbance than the corresponding (TiO₂)₅ cluster. The density of states and the projected density of states of the clusters were computed using Grid-base Projector Augmented Wave (GPAW) and PBE exchange correlation functional in a bid to further understand their electronic structure. The density of states spectra reveal surface valence and conduction bands separated by a band gap of 1.10, 2.31, and 1.37 eV for (TiO₂)₅, (TiO₂)₈, and (TiO₂)₆₈ clusters, respectively. Adsorption of croconate dyes onto the cluster shifted the absorption peaks to higher wavelengths.     

Stability of CdS-coated TiO<Subscript>2</Subscript> solar cells

The obstacle to realize the large-scale production of dye-sensitized solar cells (DSSCs) is its long-term stability and reliability problem. One of the main causes of the instability of DSSCs is the use of liquid electrolytes. In addition, exploring nano-sized particles of CdS as an alternative sensitizer for organic dye in dye-sensitized solar cells have attracted great interest due to the high cost and the instability of the organic dye. Our study has found that the CdS-coated TiO₂ cell degrades rapidly in the liquid electrolytes even under dark environment. In this work, a solid-state solar cell structure of Glass/FTO/TiO₂/CdS:Cu/FTO/glass was successfully made with an efficiency of 0.7%. CdS:Cu served as both the p-type conductor and absorber. No efficiency was obtained for cell structures of glass/FTO/TiO₂/CdS/FTO/glass. This indicates the effectiveness of hole conducting behavior of CdS:Cu. This is the first time that this type of solid-state solar cell is reported and improved stability is demonstrated.     

Insights into the role of D-A-π-A type pro-aromatic organic dyes with thieno[3,4-b]pyrazine as A acceptor group into dye-sensitized solar-cells. A TD-DFT/periodic DFT study

Time-dependent density functional theory (TD-DFT)/periodic DFT calculations were performed to determine the role of pro-aromatic organic D-A -π -A type dyes (the NL1-NL17 family) with Thieno[3,4-b]pyrazine (Tpy) as A acceptor group into dye-sensitized solar-cells (DSSC). This work presents a discussion of the ground and excited states of these dyes along with the aromaticity analysis and the electron injection step using a dye@(TiO₂)₇₂ model. The results suggest that the pro-aromatic behavior increases from the thiophene ring to the pyrazine when an acceptor π-bridge such as phenyl is used. This strong pro-aromaticity is also reflected in the electron injection step, studied using a 3x2 3 layer (TiO₂)₇₂ slab model. The resulting adsorption energies (ΔE_ads and ΔG_ads) and the electron injection (ΔG_inject) in the stablest coordination mode, Bid_CN_COOH, indicate that the redox reaction (Dye* ➔ Dye⁺ + e⁻) is stronger and more spon than the adsorption reaction (Dye⁺ + TiO₂ [+e⁻] ➔ Dye@TiO₂) in the electron injection. In this way, the highest efficiency of NL6 and NL12 is a consequence of the more significant pro-aromatic characteristics and the more spontaneous redox process. Finally, these NL dyes are promising in the molecular engineering of D-A -π -A metal-free types dyes.     

Recent progress in interface modification for dye-sensitized solar cells

Interface modification on the TiO₂/dye/electrolyte interface of dye-sensitized solar cells (DSCs) is one of the most effective approaches to suppress the charge recombination, improve electron injection and transportation, and thus ameliorate the conversion efficiency and stability of DSCs. Conventional research focusing on the photoanodes interface modification before sensitization in dye-sensitized solar cells has been carried out and reviewed. However, recent studies showed that post-modification after sensitization of the TiO₂ electrode also plays a significant role on the TiO₂/dye/electrolyte interface. This post-modification using the immersing method could deprotonate dye molecules, prohibit the dye aggregation and retard the recombination reaction. As a result, it has great influence on the devices’ photovoltaic performance. This interface modification could also provide an approach to broaden the response of the solar spectrum by introducing an alternative assembling structure. An in-situ meaning of using a co-adsorbent is employed to modify the interface in the DSCs, which could retard the aggregation of the dye molecules and enhance the conversion efficiency. In addition, electrolyte additives can be used to modify the TiO₂/dye/electrolyte interface through some unique mechanisms. Based on the background of interface modification of photoanodes before sensitization, this review introduces various interface modifications after sensitization of dye-sensitized solar cells and their mechanisms.     

Redox-Mediated Alcohol Oxidation Coupled to Hydrogen Gas Formation in a Dye-Sensitized Photosynthesis Cell

This work reports a dye-sensitized photoelectrochemical cell (DSPEC) that couples redox-mediated light-driven oxidative organic transformations to reductive hydrogen (H₂) formation. The DSPEC photoanode consists of a mesoporous anatase TiO₂ film on FTO (fluorine-doped tin oxide), sensitized with the thienopyrroledione-based dye AP11 , while H₂ was formed at a FTO-Pt cathode. Irradiation of the dye-sensitized photoanode transforms 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) to the oxidized TEMPO (TEMPO⁺), which acts as a chemical oxidant for the conversion of benzyl alcohol. The TEMPO^0/+ couple, previously used as redox mediator in DSSC, mediates efficient electron transfer from the organic substrate to the photo-oxidized dye. A DSPEC photoreactor was designed that allows in situ monitoring the reaction progress by infrared spectroscopy and gas chromatography. Sustained light-driven oxidation of benzyl alcohol to benzaldehyde within the DSPEC photoreactor, using of TEMPO as mediator, demonstrated the efficiency of the device, with a photocurrent of 0.4 mA cm⁻², approaching quantitative Faradaic efficiency and exhibiting excellent device stability.     

简易模板剂法制备多级介孔TiO2微球及其在染料敏化太阳能电池中的性能

采用模板剂法一步合成分级结构的介孔TiO₂微球, 考察了烷基胺类模板剂中烷基链长度对介孔TiO₂微球合成及性能影响. 将其应用于染料敏化太阳能电池的光阳极半导体薄膜中, 得到了9.5%-10.1%的高能量转换效率. X射线衍射(XRD)、物理吸附仪(BET)、扫描电镜(SEM)等的分析结果表明: 分级结构介孔TiO₂微球的晶相为纯锐钛矿型; 介孔TiO₂微球表面粗糙, 的纳米粒子堆积形成, 使微球具有介孔性质和较适宜的比表面积. 介孔TiO₂微球堆积形成了利于物质扩散的通道并具有良好的光散射效果; 同时微球介孔粗糙表面保证了染料的大量吸附, 从而提高了电池的光电流. 通过电化学阻抗分析结果验证了分等级结构介孔TiO₂微球光阳极有利于电解液的传输和物质扩散的优异性能.     

Preparation and properties of nanostructured TiO2 electrode by a polymer organic-medium screen-printing technique

An organic-medium screen-printing technique was developed for making porous TiO₂ electrodes. The TiO₂ pastes were prepared by mixing only 100% polyalkylene glycol and commercial nanocrystalline TiO₂ powders. The obtained paste is highly printable and hard to evaporate during printing. The TiO₂ electrodes have a very porous structure with large cavities. The dye-sensitized solar cell based on these meso-macroporous TiO₂ electrodes exhibits high overall conversion efficiency of 4.3–5.8%, which is comparable to those of prepared by water or terpineol medium.     

Synthesis of TiO2 Nanoparticles via a Ti（IV） Complex with Stearic Acid and the Photocatalytic Activity for Organic Oxidation

The nano-sized particles of TiO2 were prepared by thermal decomposition of titanium (IV) tetrabutanoxide complex with stearic acid at 450℃ in the air.It was observed that the amount of stearic acid,used initially for the complex synthesis in 2-propanol at 25℃,had great influence on the physical properties of the prepared TiO2 including crystal structure, the particle size,surface area and the adsorption capacity for organic substrate of a textile dye X3B in eater,and thereafter the photocatalytic activity for the dye oxidation.Some samples displayed lower adsorption capacity for the organic substrate in water than a TiO2 of Degussa p25,but higher photocatalytic activity for the organic oxidation.Possible reason for the observed difference was discussed in the text.     

阳极氧化法制备二氧化钛纳米管及其在太阳能电池中的应用

介绍了阳极氧化法制备二氧化钛纳米管的技术发展历程, 论述了其制备过程及生长机理, 探讨了电解液、pH值、氧化电压、氧化时间、氧化温度和后处理方法等因素对TiO₂纳米管结构和形态的影响, 综述了近几年来利用TiO₂纳米管组装染料敏化、量子点和本体异质结等太阳能电池所取得的进展, 展望了其未来发展趋势和应用前景.     

Highly ordered combined structure of anodic TiO2 nanotubes and TiO2 nanoparticles prepared by a novel route for dye-sensitized solar cells

Combined structure of anodic TiO₂ nanotubes and TiO₂ nanoparticles (TiNTs-TiNPs) has been synthesized by a facile combination of hydrothermal and chemical vapor deposition methods. Ordered TiO₂ nanotubes with smooth walls were fabricated by two step anodization method in ethylene glycol containing NH₄F at 50 V. This nanotubular array after annealing at 450 °C was subjected to the hydrothermally produced gaseous environment in an autoclave with diluted TiCl₄ solution at its bottom. Vapors of TiCl₄ were allowed to react chemically with water vapors for predefined time durations at 180 °C that resulted in the deposition of TiO₂ nanoparticles on tubes’ surface and side walls. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed that for one hour reaction duration, nanoparticles were evenly coated on the walls of nanotubes, whereas, longer durations tend to deteriorate the tubular structure. Consequently, the ordered TiNTs-TiNPs array produced after one hour coating has shown better performance for dye-sensitized solar cell DSSC) in back illumination mode with 130% increase in efficiency as compared to the device based on bare TiO₂ nanotubes. The same photoanode has higher reflective properties with higher scattering ability. The solar cell based on this photoanode exhibits higher external quantum efficiency and effective charge transport properties. This study shows that porous ordered 1D structures based on TiO₂ are of crucial importance for the high performance of DSSCs.     

Development of TiO2 pastes modified with Pechini sol–gel method for high efficiency dye-sensitized solar cell

A titanium oxide layer used for a dye-sensitized solar cell (DSSC) has to meet two opponent properties to assure a high efficiency DSSC: good connection between TiO₂ grains and a large inner surface area. Three different paste formulations based on commercial nanocrystalline TiO₂ powder (Degussa P25) are studied. Results confirm that modification of the TiO₂ paste with the Pechini sol–gel method increases the surface area of the TiO₂ layer while maintaining good connections between the nanocrystalline grains, consequently the efficiency of the DSSC increases from 1.8% to 5.3%. The structure and morphology of the TiO₂ layers are described by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD).     

Photocatalysis: Light energy conversion for the oxidation,disinfection, and decomposition of water

The results of many-year studies of the relationship between the physical properties and photocatalytic activity of TiO₂ and Pt/TiO₂ in photocatalytic purification and disinfection of air and water and water photodecomposition with oxygen evolution are presented. Recommendations are given as to finding the optimal method for platinum supporting on TiO₂ to achieve the highest possible catalytic activity. Multisite kinetic models of the gas-phase oxidation of simple organic substances are considered. Methods for regenerating the photocatalyst after its deactivation in the oxidation of sulfur-containing organic substances are suggested. New data are discussed on the acceleration of air purification by the combination of photocatalytic oxidation with atmospheric electric discharges, the addition of gaseous hydrogen peroxide, and oxidation on photocatalysts existing in the aerosol state. As compared to pure TiO₂, platinated titanium dioxide has a higher capability for disinfection and complete mineralization of microorganisms. Two promising methods for production of hydrogen from water using solar light are presented.     

A Semiconductor-Mediator-Catalyst Artificial Photosynthetic System for Photoelectrochemical Water Oxidation

In fabricating an artificial photosynthesis (AP) electrode for water oxidation, we have devised a semiconductor-mediator-catalyst structure that mimics photosystem II (PSII). It is based on a surface layer of vertically grown nanorods of Fe₂O₃ on fluorine doped tin oxide (FTO) electrodes with a carbazole mediator base and a Ru(II) carbene complex on a nanolayer of TiO₂ as a water oxidation co-catalyst. The resulting hybrid assembly, FTO|Fe₂O₃|−carbazole|TiO₂|−Ru(carbene) , demonstrates an enhanced photoelectrochemical (PEC) water oxidation performance compared to an electrode without the added carbaozle base with an increase in photocurrent density of 2.2-fold at 0.95 V vs. NHE and a negatively shifted onset potential of 500 mV. The enhanced PEC performance is attributable to carbazole mediator accelerated interfacial hole transfer from Fe₂O₃ to the Ru(II) carbene co-catalyst, with an improved effective surface area for the water oxidation reaction and reduced charge transfer resistance.     

Dye-sensitized solar cells based on bisindolylmaleimide derivatives

Three organic dyes based on bisindolylmaleimide derivatives (I1, I2 and I3) were synthesized and investigated as sensitizers for the application in nanocrystalline TiO₂ solar cells. The indole group, maleimide group and carboxylic group functioned as electron donor, acceptor and anchoring group, respectively. Solar-to-electrical energy conversion efficiencies under simulated amplitude-modulated 1.5 irradiation (100 mW·cm⁻²) of 2.07% were obtained for solar cells based on I2 and of 1.87% and 1.50% for I3 and I1, respectively. The open circuit voltage V _oc was demonstrated to be enhanced by the introduction of dodecyl or benzyl moieties on the indole groups. The nonplanar structure of bisindolylmaleimide was proven to be effective in aggregation resistance. This work suggests that organic sensitizers with maleimide as electron acceptor are promising candidates as organic sensitizers in dye-sensitized solar cells.     

A green approach to the synthesis of 2,3‐diaminophenazine using a photocatalytic system of CdFe2O4/TiO2 nanoparticles

In recent years, the development of novel green chemistry routes for the synthesis of organic compounds has become very attractive to many research groups. Nanoparticles have been widely used because of their potential applications in catalysis, environmental remediation, electronic fields, biomedical, and industrial fields. In this article, a rapid, efficient, and simple approach was applied for the synthesis of 2,3‐diaminophenazine using a new photocatalytic system of CdFe₂O₄/TiO₂ nanoparticles in water as a benign solvent. The structure of the synthesized CdFe₂O₄/TiO₂ nanoparticle was confirmed using different methods such as transmission electron microscope (TEM), X‐ray diffraction (XRD), and magnetic measurements. It was found that the rate and yield of the photocatalytic synthesis of 2,3‐diaminophenazine were improved using CdFe₂O₄/TiO₂ nanoparticles compared to other methods.     

Adsorption of CH3 COOH on TiO2: IR and theoretical investigations

Adsorption of organic molecules on TiO₂ surfaces is widely used in a number of technological applications, from heterogeneous catalysis, in particular photodegradation of organic pollutants, to dye-sensitized solar cells (DSSCs), where in most cases the dye molecules are grafted to the anatase TiO₂ surface through a carboxylic group. In particular, organic/TiO₂ systems can be of relevant importance in the modeling of electronic devices, in which the molecular layer is able to finely tune the electric properties, as well as of highly efficient heterogeneous catalysts. A key step is the understanding of the nature of the carbon-oxygen-titanium bonds on such surfaces, which is the specific aim of our combined IR and ab initio study of the adsorption of CH₃COOH on TiO₂. The experimental determination of the CH₃COOH frequency shifts due to the absorption on the P25 (Degussa) TiO₂ surface was performed by means of a step-wise procedure, consisting of a preliminary outgassing at 600°C of TiO₂, in order to have a high dehydroxilation degree of the surface, followed by IR measurements at increasing CH₃COOH pressure and subsequent desorption. Frequency calculations to be compared with experimental results were performed within a cluster approach using GAUSSIAN03 package. In order to make such calculations feasible, we decided to use an ONIOM approach where the model system, i.e., the small portion corresponding to CH₃COOH plus the surface atoms, is treated at DFT level while the real system, comprising the bulk atoms, at MSINDO level. Once properly tested the ONIOM approach to characterize the interaction of TiO₂ with CH₃COOH, we computed the vibrational frequencies and compared them with the results of the IR experiments, providing some insight for the interpretation of the experimental complex vibrational pattern.     

香豆素343敏化TiO2纳米粒子光致电子转移的荧光和拉曼光谱

通过对香豆素343(C343)染料敏化TiO₂纳米粒子光致电子转移的荧光和拉曼光谱特性的研究表明,C343染料敏化TiO₂纳米粒子稳态吸收光谱和稳态荧光光谱的红移归因于从被吸附的C343染料分子激发态和C343/TiO₂复合物到TiO₂纳米粒子导带的光致电子转移. 由时间分辨荧光光谱确定了C343染料敏化TiO₂纳米粒子的逆向电子转移速率常数为τ₁=31 ps. C343 染料敏化TiO₂纳米粒子体系拉曼光谱的研究表明, 被吸附在界面处的染料分子主链碳键的伸缩振动和碳环的呼吸运动的振动模式对超快界面光致电子转移有着重要的促进作用.