共查询到20条相似文献,搜索用时 78 毫秒
1.
In this study, Fe3O4@TiO2 nanoparticles were synthesized as a new Positron Emission Tomography/Magnetic Resonance Imaging (PET/MRI) hybrid imaging agent and radiolabeled with 89Zr. In addition, Fe3O4 nanoparticles were synthesized and radiolabeled with 89Zr. Df-Bz-NCS was used as bifunctional ligand. The nanoconjugates were characterized with transmission electron microscopy, scanning electron microscopy, and dynamic light scattering. Radiolabeling yields were 100%. Breast and prostate cancer cell affinities and cytotoxicity were determined using in vitro cell culture assays. The results demonstrated that Fe3O4@TiO2 nanoparticles are promising for PET/MR imaging. Finally, unlike Fe3O4 nanoparticles, Fe3O4@TiO2 nanoparticles showed a fluorescence spectrum at an excitation wavelength of 250 nm and an emission wavelength of 314 nm. Therefore, in addition to bearing the magnetic properties of Fe3O4 nanoparticles, Fe3O4@TiO2 nanoparticles display fluorescence emission. This provides them with photodynamic therapy potential. Therefore multimodal treatment was performed with the combination of PDT and RT by using human prostate cancer cell line (PC3). The development of 89Zr-Df-Bz-NCS-Fe3O4@TiO2 nanoparticles as a new multifunctional PET/MRI agent with photodynamic therapy and hyperthermia therapeutic ability would be very useful. 相似文献
2.
Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles
下载免费PDF全文
![点击此处可从《应用有机金属化学》网站下载免费的PDF全文](/ch/ext_images/free.gif)
A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe2O3 core and a TiO2 shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe2O3@TiO2 and γ‐Fe2O3@TiO2‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g?1, respectively. γ‐Fe2O3@TiO2‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed. 相似文献
3.
In this study, the synthesis of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles (Fe3O4@SiO2@SO3H) as a nanocatalyst with large density of acidic groups is suggested. This nanocatalyst was prepared in three steps: preparation of colloidal iron oxide magnetic nanoparticles (Fe3O4 MNPs), coating of silica on Fe3O4 MNPs (Fe3O4@SiO2) and incorporation of sulfonic acid as a functional group on the surface of Fe3O4@SiO2 nanoparticles (Fe3O4@SiO2@SO3H). The properties of the prepared magnetic nanoparticles were characterized using transmission electron microscopy, infrared spectroscopy, vibrating sample magnetometry, X‐ray diffraction and thermogravimetric analysis. Finally, the applicability of the synthesized magnetic nanoparticles was tested as a heterogeneous solid acid nanocatalyst for one‐pot synthesis of diindolyloxindole derivatives in aqueous medium. Oxindole derivatives were produced by the coupling of indole and isatin compounds with good to high yields (60–98%). Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
4.
Equilibrium and kinetic study of novel methyltrimethoxysilane magnetic titanium dioxide nanocomposite for methylene blue adsorption from aqueous media
下载免费PDF全文
![点击此处可从《应用有机金属化学》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Parvin Alizadeh Eslami Mohammad Afzal Kamboh Hamid Rashidi Nodeh Wan Aini Wan Ibrahim 《应用有机金属化学》2018,32(6)
Novel magnetic titanium dioxide nanoparticles decorated with methyltrimethoxysilane (Fe3O4@TiO2‐MTMOS) were successfully fabricated via a sol–gel method at room temperature. The synthesized material was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, thermogravimetric analysis and vibrating sample magnetometry. The removal efficiency of the adsorbent was evaluated through the adsorption of methylene blue (MB) dye from water samples. The adsorption isotherm and kinetics were evaluated using various models. The Langmuir model indicated a high adsorption capacity (11.5 mg g?1) of Fe3O4@TiO2‐MTMOS. The nanocomposite exhibited high removal efficiency (96%) and good regeneration (10 times) compared to Fe3O4 and Fe3O4@TiO2 at pH = 9.0. Based on the adsorption mechanism, electrostatic interaction plays a main role in adsorption since MB dye is cationic in nature at pH = 9, whereas the adsorbent acquired an anionic nature. The newly synthesized Fe3O4@TiO2‐MTMOS can be used as a promising material for efficient removal of MB dye from aqueous media. 相似文献
5.
《中国化学会会志》2018,65(6):687-695
In this work, the PPy/Fe3O4@TiO2 composite was synthesized and characterized by X‐ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, and magnetic measurements (using a vibrating sample magnetometer). The adsorption performance of PPy/Fe3O4@TiO2 composite for Cr(VI) ions was evaluated by UV irradiation. The effects of pH, adsorbent dose, contact time, and the initial concentration on the adsorption performance of Cr(VI) onto PPy/Fe3O4@TiO2 were investigated. The maximum adsorption capacity of Cr(VI) upon doped PPy/Fe3O4@TiO2 is 85.30 mg/g at room temperature. The total adsorption process likely follows the Langmuir model and pseudo‐second‐order kinetics. Our study suggests that the PPy/Fe3O4@TiO2 composite can be efficiently used for the adsorption of Cr(VI) ions. 相似文献
6.
Dr. Jiwei Liu Junjie Xu Prof. Renchao Che Huajun Chen Mengmei Liu Zhengwang Liu 《Chemistry (Weinheim an der Bergstrasse, Germany)》2013,19(21):6746-6752
A facile and efficient strategy for the synthesis of hierarchical yolk–shell microspheres with magnetic Fe3O4 cores and dielectric TiO2 shells has been developed. Various Fe3O4@TiO2 yolk–shell microspheres with different core sizes, interstitial void volumes, and shell thicknesses have been successfully synthesized by controlling the synthetic parameters. Moreover, the microwave absorption properties of these yolk–shell microspheres, such as the complex permittivity and permeability, were investigated. The electromagnetic data demonstrate that the as‐synthesized Fe3O4@TiO2 yolk–shell microspheres exhibit significantly enhanced microwave absorption properties compared with pure Fe3O4 and our previously reported Fe3O4@TiO2 core–shell microspheres, which may result from the unique yolk–shell structure with a large surface area and high porosity, as well as synergistic effects between the functional Fe3O4 cores and TiO2 shells. 相似文献
7.
Silver,iron, and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 MNPs catalyzed one‐pot five‐component reactions for the synthesis of tetrahydropyridines by tandem condensation of amines,aldehydes, and methyl acetoacetate
下载免费PDF全文
![点击此处可从《应用有机金属化学》网站下载免费的PDF全文](/ch/ext_images/free.gif)
In this study, Ag, Ni2+, and Fe2+ immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 nanoparticles (γ‐Fe2O3@HAp‐Ag, γ‐Fe2O3@HAp‐Ni2+, and γ‐Fe2O3@HAp‐Fe2+) as a new and reusable Lewis acid magnetic nanocatalyst was successfully synthesized and reported for an atom economic, extremely facile, and environmentally benign procedure for the synthesis of highly functionalized tetrahydropyridines derivatives 4a‐t is described by one‐pot five‐component reaction of 2 equiv of aldehydes 1 , 2 equiv of amines 2 , and 1 equiv of methyl acetoacetate 3 in EtOH at room temperature in good to high yields and short reaction time. The presented methodology offers several advantages such as easy work‐up procedure, reusability of the magnetic nanocatalyst, operational simplicity, green synthesis avoiding toxic reagents and solvent, mild reaction conditions, and no tedious column chromatographic separation. 相似文献
8.
Esmaeilpour Mohsen Javidi Jaber Mokhtari Abarghoui Mehdi Nowroozi Dodeji Fatemeh 《Journal of the Iranian Chemical Society》2014,11(2):499-510
We demonstrate herein the modification of magnetic nanoparticles and their use as a magnetic nanocatalyst in direct coupling reactions of aryl halides with terminal alkynes. Magnetite particles were prepared by simple co-precipitation method in aqueous medium, and then Fe3O4@ SiO2 nanosphere was synthesized by using nano-Fe3O4 as the core, TEOS as the silica source and PVA as the surfactant. Fe3O4@SiO2 was coated with polymeric N-heterocyclic carbene/Pd. The samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometer and N2 adsorption–desorption isotherm analysis. Poly (N-vinyl imidazole) functionalized Fe3O4@SiO2 nanoparticle was found to be an efficient nanocatalyst in Sonogashira–Hagihara cross-coupling reactions. The nanocatalyst can be easily recovered by a magnetic field and reused for six runs without appreciable loss of its catalytic activity. 相似文献
9.
《Journal of Energy Chemistry》2017,26(1):17-23
In this work we synthesize a novel and highly efficient photocatalyst for degradation of methyl orange and rhodamine B. In addition, a new method for synthesis of Fe_3O_4@SiO_2@TiO_2@Ho magnetic core-shell nanoparticles with spherical morphology is proposed. The crystal structures, morphology and chemical properties of the as-synthesized nanoparticles were characterized using Fourier transform infrared spectroscopy(FT-IR), scanning electron microscopy(SEM), transmission electron microscopy(TEM), energy dispersive X-ray(EDS), X-ray diffraction(XRD), UV–vis diffuse reflectance spectroscopy(DRS) and vibrating sample magnetometer(VSM) techniques. The photocatalytic activity of Fe_3O_4@SiO_2@TiO_2@Ho was investigated by degradation of methyl orange(MO) as cationic dye and rhodamine B(Rh B) as anionic dye in aqueous solution under UV/vis irradiation. The results indicate that about 92.1% of Rh B and78.4% of MO were degraded after 120 and 150 min, respectively. These degradation results show that Fe_3O_4@SiO_2@TiO_2@Ho nanoparticles are better photocatalyst than Fe3O4@Si O2@TiO 2@Ho for degradation of MO and Rh B. As well as, the catalyst shows high recovery and stability even after several separation cycles. 相似文献
10.
We report on a method for the extraction of organophosphorus pesticides (OPPs) from water samples using mixed hemimicelles and magnetic titanium dioxide nanoparticles (Fe3O4@TiO2) modified by cetyltrimethylammonium. Fe3O4@TiO2 nanoparticles were synthesized by a hydrothermal process and then characterized by scanning electron microscopy and Fourier transform IR spectrometry. The effects of the quantity of surfactant, extraction time, desorption solvent, pH value, extraction volume and reuse of the sorbent were optimized with respect to the extraction of OPPs including chlorpyrifos, dimethoate, and trichlorfon. The extraction method was applied to analyze OPPs in environmental water using HPLC along with UV detection. The method has a wide linear range (100–15,000 ng L?1), good linearity (r?>?0.999), and low detection limits (26–30 ng L?1). The enrichment factor is ~1,000. The recoveries (at spiked levels of 100, 1,000 and 10,000 ng L?1) are in the range of 88.5–96.7 %, and the relative standard deviations range from 2.4 % to 8.7 %. Figure
Schematic illustration of the preparation of CTAB coated Fe3O4@TiO2 and its application as SPE sorbent for enriching OPPs 相似文献
11.
A novel chiral magnetic nanocatalyst was prepared by the surface modification of Fe3O4 magnetic nanoparticles (MNPs) with a chloropropylsilane and further by arginine to form Fe3O4@propylsilan‐arginine (Fe3O4@PS‐Arg). After the structural confirmation of Fe3O4@PS‐Arg synthesized MNPs by Fourier transform‐infrared, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy, vibrating‐sample magnetometry and thermogravimetric analyses, their catalytic activity was evaluated for one‐pot enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives. The results showed that in the presence of 0.07 g Fe3O4@PS‐Arg nanocatalyst and ethanol as solvent, the best reaction yield (96%) was obtained in the least time (5 min). Easy operation, reusability and stability, short reaction time, high reaction yields and good enantioselectivity are the major advantages of the newly synthesized nanocatalyst. Also, this study provides a novel strategy for further research and investigation on the synthesis of new reusable enantioselective catalysts and chiral compounds. 相似文献
12.
Magnetically recoverable and environmentally friendly Cu‐based heterogeneous catalyst has been synthesized for the one‐pot conversion of aldehydes to their corresponding primary amides. The Fe3O4@SiO2 nanocomposites were prepared by synthesis of Fe3O4 magnetic nanoparticles (MNPs) which was then coated with a silica shell via Stöber method. Bi‐functional cysteine amino acid was covalently bonded onto the siliceous shell of nanocatalyst. The CuII ions were then loaded onto the modified surface of nanocatalyst. Finally, uniformly dispersed copper nanoparticles were achieved by reduction of CuII ions with NaBH4. Amidation reaction of aryl halides with electron‐withdrawing or electron‐donating groups and hydroxylamine hydrochloride catalyzed with Fe3O4@SiO2@Cysteine‐copper (FSC‐Cu) MNPs in aqueous condition gave an excellent yield of products. The FSC‐Cu MNPs could be easily isolated from the reaction mixture with an external magnet and reused at least 8 times without significant loss in activity. 相似文献
13.
Nano‐Fe3O4@TiO2/Cu2O Core‐shell Composite: A Convenient Magnetic Separable Catalyst for A3 and KA2 Coupling
下载免费PDF全文
![点击此处可从《中国化学会会志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
An eco‐efficient one‐pot three component reaction between different aldehydes or ketones with alkynes and amines for the synthesis of propargylamines was performed using Fe3O4@TiO2/Cu2O as a nano‐magnetic composite under solvent free condition. The catalyst showed remarkable catalytic activity by decreasing the time of the reaction in comparison of other reported magnetic catalysts. In addition, the Fe3O4@TiO2/Cu2O can be easily recycled and reutilized for five times without apparent loss of catalytic activity. 相似文献
14.
The immobilization of sulfonic acid on the surface of Fe3O4 magnetic nanoparticles (MNPs) as a novel acid nanocatalyst has been successfully reported. The morphological features, thermal stability, magnetic properties, and other physicochemical properties of the prepared superparamagnetic core–shell (Fe3O4@PFBA–Metformin@SO3H) were thoroughly characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD), energy‐dispersive X‐ray spectroscopy (EDS), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis–differential thermal analysis (TGA‐DTA), atomic force microscopy (AFM), dynamic light scattering (DLS), Brunauer–Emmett–Teller (BET), and vibrating sample magnetometer (VSM) techniques. It was applied as an efficient and reusable catalyst for the synthesis of 2‐(piperazin‐1‐yl) quinoxaline and benzimidazole derivatives via a one‐pot multiple‐component cascade reaction under green conditions. The results displayed the excellent catalytic activity of Fe3O4@PFBA–metformin@SO3H as an organic–inorganic hybrid nanocatalyst in condensation and multicomponent Mannich‐type reactions. The easy separation, simple workup, excellent stability, and reusability of the nanocatalyst and quantitative yields of products and short reaction time are some outstanding advantages of this protocol. 相似文献
15.
Sulfonated Sulfurol supported Fe3O4 (Fe3O4@SiO2-Pr-Sulfurol-SO3H) a new magnetic reusable nanocatalyst was prepared using chemical modification of magnetic nanoparticles (MNPs) surface with Sulfurol-SO3H. The Sulfurol-SO3H moieties on the surface of MNPs act as acidic catalytic sites for catalysis purposes. Fe3O4@SiO2-Pr-Sulfurol-SO3H was authenticated by usual analytical and spectroscopic techniques. The prepared Fe3O4@SiO2-Pr-Sulfurol-SO3H MNPs were applied to the preparation of novel Spiro[acridine-9,5′-thiazole]-1,4′-dione derivatives via the three-component condensation of isatins, dimedone and thioamides or thioureas.
相似文献16.
We report the synthesis of magnetically separable Fe3O4@Silica‐Threonine‐Pd0 magnetic nanoparticles with a core–shell structure. After synthesis of Fe3O4@Silica, threonine as an efficient stabilizer/ligand was bonded to the surface of Fe3O4@Silica. Then, palladium nanoparticles were generated on the threonine‐modified catalyst. The threonine stabilizer helps to generate palladium nanoparticles of small size (less than 4 nm) with high dispersity and uniformity. Magnetically separable Fe3O4@Silica‐Threonine‐Pd0 nanocatalyst was fully characterized using various techniques. This nanocatalyst efficiently catalysed the Heck cross‐coupling reaction of a variety of substrates in water medium as a green, safe and inexpensive solvent at 80°C. The Fe3O4@Silica‐Threonine‐Pd0 catalyst was used for at least eight successful consecutive runs with palladium leaching of only 0.05%. 相似文献
17.
Synthesis and catalytic evaluation of Fe3O4/MWCNTs nanozyme as recyclable peroxidase mimetics: Biochemical and physicochemical characterization
下载免费PDF全文
![点击此处可从《应用有机金属化学》网站下载免费的PDF全文](/ch/ext_images/free.gif)
In this research, the nanocomposite of multiwalled carbon nanotubes and magnetic metal oxide nanoparticles (Fe3O4/MWCNTs), as enzyme mimetic, was synthesized using an in situ chemical reduction method. The structure, composition and morphology of the prepared Fe3O4/MWCNT nanocomposite materials were characterized using X‐ray diffraction, FT‐IR and scanning electron microscopy with energy dispersive X‐ray spectroscopy, respectively. The magnetic properties of the nanocomposite were investigated by the vibrating sample magnetometer. A colorimetric system involving nanozyme, phenol/4‐aminoantipyrine and H2O2 was utilized for the determination of peroxidase mimetic catalytic assay. The obtained results confirmed that the synthesis of Fe3O4/MWCNTs nanostructures was successful. It was found that Fe3O4/MWCNTs nanohybrid exhibited peroxidase‐like activity without any pH limitation. Colorimetric data demonstrated that the prepared nanocatalyst had higher catalytic activity toward H2O2 than MWCNTs. The kinetic parameters of the nanozyme, Km and Vmax, were estimated to be 8.3 mm and 1.4 mm min?1, respectively. The Fe3O4/MWCNTs nanostructures were also successfully applied for glucose detection. In addition, peroxidase‐like activity of the nanozyme increased in the presence of butyl‐imidazolium bromide ionic liquid. These biomimetic catalysts have some advantages, such as simplicity, stability, reusability and cost effectiveness, which makes them great candidates to be used in various fields of biotechnology applications. 相似文献
18.
Ali Ramazani Mehdi Khoobi Fariba Sadri Roghayeh Tarasi Abbas Shafiee Hamideh Aghahosseini Sang Woo Joo 《应用有机金属化学》2018,32(1)
Palladium immobilized magnetic nanoFe3O4@hyperbranched polyethylenimine (Fe3O4@HPEI.Pd) was prepared according to a simple and cost effective pathway and it was employed as a new efficient and selective organic–inorganic hybrid nanocatalyst for the aqueous oxidation of primary and secondary alcohols to their corresponding products in good yields applying oxone (potassium hydrogen monopersulfate) and H2O2 as an oxidant at room temperature. Moreover, the catalytic system was reused at least 13 times without significant loss of activity. The complete characterization of this efficient nanocatalyst was investigated by FTIR, UV–Vis, TEM, SEM, XRD, TGA, VSM, ICP and EDX techniques. 相似文献
19.
《应用有机金属化学》2017,31(8)
S ‐Benzylisothiourea complex of palladium supported on modified Fe3O4 magnetic nanoparticles (Pd‐SBTU@Fe3O4) is reported for carbon–carbon coupling through the Suzuki coupling reaction. Also, the synthesis of polyhydroquinoline derivatives is reported in the presence of Pd‐SBTU@Fe3O4 as nanocatalyst. The prepared nanoparticles were characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, vibrating sample magnetometry and inductively coupled plasma atomic emission spectroscopy. The nanocatalyst was easily recovered using an external magnet and reused several times without significant loss of its catalytic efficiency. The heterogeneity of Pd‐SBTU@Fe3O4 was studied using hot filtration. 相似文献
20.
This study presented an effective method to modify the surface chemical reactivity of a SiO2/Fe3O4 support. The unmodified SiO2/Fe3O4 support was prepared by the hydrolysis and condensation of tetraethoxysilane on the surface of hydrophilic Fe3O4 nanoparticles. These were then modified by a heat treatment in an ethanol/water solution under reflux. The resulting samples were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and transmission/scanning electron microscopy. The immobilization of a TiO2 nanocatalyst on both unmodified and modified supports was performed to investigate the effects of the modification of the magnetic silica support on the loading of a TiO2 nanocatalyst and the photocatalytic activity. The loading of TiO2 and the photocatalytic activity were both improved. 相似文献