One-step synthesis of ultra-small amount of Pd-Alloyed Zinc Nanosheets for efficient electrochemical CO2 reduction to CO

The practicality of the electrochemical CO₂ reduction technique depends on the development of cost-effective, robust, and highly selective catalysts. To achieve this goal, we have engineered self-supported 3D electrodes composed of Pd-Zn nanosheets (NSs) for CO₂ electrochemical reduction to CO with minimal Pd content. This innovative electrode with an increased surface area was created using an electrodeposition method employing a dynamic hydrogen bubble template. By precisely adjusting the Pd content, we improved the thickness, porosity, and surface area of the electrodes, resulting in a CO₂-to-CO selectivity reaching as high as 88.5 %, with an average of at least 80 % sustained over 10 hours. This remarkable improved activity can be attributed to the synergistic effects of an appropriate Pd/Zn atomic ratio as well as to the large surface area of nanosheets structures with rich edge active sites. Furthermore, to get around the limitations of CO₂ mass transfer, reactions were done at high pressures conditions ranging from 3 to 9.5 bar; this strategic approach yielded an outstanding partial current density of −304.6 mA cm⁻² for CO. These noteworthy findings establish concepts for constructing effective and earth-abundant CO-producing electrocatalysts.     

Modulating CoFeOX Nanosheets Towards Enhanced CO2 Photoreduction to Syngas: Effect of Calcination Temperature and Mixed-Valence Multi-Metals

CoFeO_X nanosheets were synthesized by a facile coprecipitation and calcination method. The effect of calcination temperature on the crystal texture, morphology and surface areas of CoFeO_X were fully explored. CoFeO_X sample calcined at 600 °C (CoFeO_X-600) showed superior catalytic performance for the reduction of CO₂ under visible light. Compared with the pure Ru(bpy)₃²⁺-sensitized CO₂ reduction system, the CoFeO_X-added system achieved 19-fold enhancement of CO production (45.7 μmol/h). The mixed valence state and nanosheet-like structure of CoFeO_X cocatalyst support its ultra-high charge transfer and abundant CO₂ active adsorption sites exposure, which promote the separation of photogenerated charges, and thus improve the photocatalytic CO₂ reduction activity. Carbon source of CO from CO₂ was verified by ¹³CO₂ isotopic labelling experiment. Repeated activity experiments confirmed the good stability of CoFeO_X in the CO₂ photoreduction system. This work would provide prospective insights into developing novel cost-effective, efficient, and durable non-precious metal cocatalysts to improve the efficiency of photocatalytic reduction of CO₂.     

DFT-based Machine Learning for Ensemble Effect of Pd@Au Electrocatalysts on CO2 Reduction Reaction

The ensemble effect due to variation of Pd content in Pd−Au alloys have been widely investigated for several important reactions, including CO₂ reduction reaction (CO₂RR), however, identifying the stable Pd arrangements on the alloyed surface and picking out the active sites are still challenging. Here we use a density functional theory (DFT) based machine-learning (ML) approach to efficiently find the low-energy configurations of Pd−Au(111) surface alloys and the potentially active sites for CO₂RR, fully covering the Pd content from 0 to 100 %. The ML model is actively learning process to improve the predicting accuracy for the configuration formation energy and to find the stable Pd−Au(111) alloyed surfaces, respectively. The local surface properties of adsorption sites are classified into two classes by the K-means clustering approach, which are closely related to the Pd content on Au surface. The classification is reflected in the variation of adsorption energy of CO and H: In the low Pd content range (0–60 %) the adsorption energies over the surface alloys can be tuned significantly, and in the medium Pd content (37-68 %), the catalytic activity of surface alloys for CO₂RR can be increased by increase the Pd content and attributed to the meta-stable active site over the surface. Thus, the active site-dependent reaction mechanism is elucidated based on the ensemble effect, which provides new physical insights to understand the surface-related properties of catalysts.     

Low‐Coordinated Edge Sites on Ultrathin Palladium Nanosheets Boost Carbon Dioxide Electroreduction Performance

Electrochemical conversion of carbon dioxide (CO₂) to value‐added products is a possible way to decrease the problems resulting from CO₂ emission. Thanks to the eminent conductivity and proper adsorption to intermediates, Pd has become a promising candidate for CO₂ electroreduction (CO₂ER). However, Pd‐based nanocatalysts generally need a large overpotential. Herein we describe that ultrathin Pd nanosheets effectively reduce the onset potential for CO by exposing abundant atoms with comparatively low generalized coordination number. Hexagonal Pd nanosheets with 5 atomic thickness and 5.1 nm edge length reached CO faradaic efficiency of 94 % at ?0.5 V, without any decay after a stability test of 8 h. It appears to be the most efficient among all of Pd‐based catalysts toward CO₂ER. Uniform hexagonal morphology made it reasonable to build models and take DFT calculations. The enhanced activity originates from mainly edge sites on palladium nanosheets.     

Formation of Hierarchical FeCoS2–CoS2 Double‐Shelled Nanotubes with Enhanced Performance for Photocatalytic Reduction of CO2

Hierarchical FeCoS₂–CoS₂ double‐shelled nanotubes have been rationally designed and constructed for efficient photocatalytic CO₂ reduction under visible light. The synthetic strategy, engaging the two‐step cation‐exchange reactions, precisely integrates two metal sulfides into a double‐shelled tubular heterostructure with both of the shells assembled from ultrathin two‐dimensional (2D) nanosheets. Benefiting from the distinctive structure and composition, the FeCoS₂–CoS₂ hybrid can reduce bulk‐to‐surface diffusion length of photoexcited charge carriers to facilitate their separation. Furthermore, this hybrid structure can expose abundant active sites for enhancing CO₂ adsorption and surface‐dependent redox reactions, and harvest incident solar irradiation more efficiently by light scattering in the complex interior. As a result, these hierarchical FeCoS₂–CoS₂ double‐shelled nanotubes exhibit superior activity and high stability for photosensitized deoxygenative CO₂ reduction, affording a high CO‐generating rate of 28.1 μmol h^?1 (per 0.5 mg of catalyst).     

Controllable Synthesis of Few‐Layer Bismuth Subcarbonate by Electrochemical Exfoliation for Enhanced CO2 Reduction Performance

Two‐dimensional (2D) engineering of materials has been recently explored to enhance the performance of electrocatalysts by reducing their dimensionality and introducing more catalytically active ones. In this work, controllable synthesis of few‐layer bismuth subcarbonate nanosheets has been achieved via an electrochemical exfoliation method. These nanosheets catalyse CO₂ reduction to formate with high faradaic efficiency and high current density at a low overpotential owing to the 2D structure and co‐existence of bismuth subcarbonate and bismuth metal under catalytic turnover conditions. Two underlying fast electron transfer processes revealed by Fourier‐transformed alternating current voltammetry (FTacV) are attributed to CO₂ reduction at bismuth subcarbonate and bismuth metal. FTacV results also suggest that protonation of CO₂^.? is the rate determining step for bismuth catalysed CO₂ reduction.     

Oxygen Vacancies in ZnO Nanosheets Enhance CO2 Electrochemical Reduction to CO

As electron transfer to CO₂ is generally considered to be the critical step during the activation of CO₂, it is important to develop approaches to engineer the electronic properties of catalysts to improve their performance in CO₂ electrochemical reduction. Herein, we developed an efficient strategy to facilitate CO₂ activation by introducing oxygen vacancies into electrocatalysts with electronic‐rich surface. ZnO nanosheets rich in oxygen vacancies exhibited a current density of ?16.1 mA cm^?2 with a Faradaic efficiency of 83 % for CO production. Based on density functional theory (DFT) calculations, the introduction of oxygen vacancies increased the charge density of ZnO around the valence band maximum, resulting in the enhanced activation of CO₂. Mechanistic studies further revealed that the enhancement of CO production by introducing oxygen vacancies into ZnO nanosheets originated from the increased binding strength of CO₂ and the eased CO₂ activation.     

Bias-Free Solar-Driven Syngas Production: A Fe2O3 Photoanode Featuring Single-Atom Cobalt Integrated with a Silver-Palladium Cathode

Photoelectrochemical syngas production from aqueous CO₂ is a promising technique for carbon capture and utilization. Herein, we demonstrate the efficient and tunable syngas production by integrating a single-atom cobalt-catalyst-decorated α-Fe₂O₃ photoanode with a bimetallic Ag/Pd alloy cathode. A record syngas production activity of 81.9 μmol cm⁻² h⁻¹ (CO/H₂ ratio: ≈1 : 1) was achieved under artificial sunlight (AM 1.5 G) with an excellent durability. Systematic studies reveal that the Co single atoms effectively extract the holes from Fe₂O₃ photoanodes and serve as active sites for promoting oxygen evolution. Simultaneously, the Pd and Ag atoms in bimetallic cathodes selectively adsorb CO₂ and protons for facilitating CO production. Further incorporation with a photovoltaic, to allow solar light (>600 nm) to be utilized, yields a bias-free CO₂ reduction device with solar-to-CO and solar-to-H₂ conversion efficiencies up to 1.33 and 1.36 %, respectively.     

2D PbS Nanosheets with Zigzag Edges for Efficient CO2 Photoconversion

The rational design of transition-metal sulfide with two-dimensional (2D) structure and tunable edges on the nanoscale can effectively improve their activity for variously catalytic reactions. Herein, the 2D PbS nanosheets with abundant zigzag edges (e-PbS NS), which exhibited an excellent performance for CO₂ photoconversion to CO, were constructed. The zigzag edges on the PbS NS are beneficial for exposing more active sites and promoting charge separation, thereby accelerating the kinetics process of CO₂ photoreduction. This study provides a strategy to regulate structure with effective edge sites for the CO₂ reduction.     

Electrochemical Reduction of Carbon Dioxide to Methanol on Hierarchical Pd/SnO2 Nanosheets with Abundant Pd–O–Sn Interfaces

Electrochemical conversion of CO₂ into fuels using electricity generated from renewable sources helps to create an artificial carbon cycle. However, the low efficiency and poor stability hinder the practical use of most conventional electrocatalysts. In this work, a 2D hierarchical Pd/SnO₂ structure, ultrathin Pd nanosheets partially capped by SnO₂ nanoparticles, is designed to enable multi‐electron transfer for selective electroreduction of CO₂ into CH₃OH. Such a structure design not only enhances the adsorption of CO₂ on SnO₂, but also weakens the binding strength of CO on Pd due to the as‐built Pd–O–Sn interfaces, which is demonstrated to be critical to improve the electrocatalytic selectivity and stability of Pd catalysts. This work provides a new strategy to improve electrochemical performance of metal‐based catalysts by creating metal oxide interfaces for selective electroreduction of CO₂.     

Organic Polymer Dots Photocatalyze CO2 Reduction in Aqueous Solution

Developing low-cost and efficient photocatalysts to convert CO₂ into valuable fuels is desirable to realize a carbon-neutral society. In this work, we report that polymer dots (Pdots) of poly[(9,9′-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-thiadiazole)] (PFBT), without adding any extra co-catalyst, can photocatalyze reduction of CO₂ into CO in aqueous solution, rendering a CO production rate of 57 μmol g⁻¹ h⁻¹ with a detectable selectivity of up to 100 %. After 5 cycles of CO₂ re-purging experiments, no distinct decline in CO amount and reaction rate was observed, indicating the promising photocatalytic stability of PFBT Pdots in the photocatalytic CO₂ reduction reaction. A mechanistic study reveals that photoexcited PFBT Pdots are reduced by sacrificial donor first, then the reduced PFBT Pdots can bind CO₂ and reduce it into CO via their intrinsic active sites. This work highlights the application of organic Pdots for CO₂ reduction in aqueous solution, which therefore provides a strategy to develop highly efficient and environmentally friendly nanoparticulate photocatalysts for CO₂ reduction.     

Transition Metal Nitrides as Promising Catalyst Supports for Tuning CO/H2 Syngas Production from Electrochemical CO2 Reduction

The electrochemical carbon dioxide reduction reaction (CO₂RR) to produce synthesis gas (syngas) with tunable CO/H₂ ratios has been studied by supporting Pd catalysts on transition metal nitride (TMN) substrates. Combining experimental measurements and density functional theory (DFT) calculations, Pd‐modified niobium nitride (Pd/NbN) is found to generate much higher CO and H₂ partial current densities and greater CO Faradaic efficiency than Pd‐modified vanadium nitride (Pd/VN) and commercial Pd/C catalysts. In‐situ X‐ray diffraction identifies the formation of PdH in Pd/NbN and Pd/C under CO₂RR conditions, whereas the Pd in Pd/VN is not fully transformed into the active PdH phase. DFT calculations show that the stabilized *HOCO and weakened *CO intermediates on PdH/NbN are critical to achieving higher CO₂RR activity. This work suggests that NbN is a promising substrate to modify Pd, resulting in an enhanced electrochemical conversion of CO₂ to syngas with a potential reduction in precious metal loading.     

Boosting Electrochemical CO2 Reduction on Metal–Organic Frameworks via Ligand Doping

Electrochemical CO₂ reduction relies on the availability of highly efficient and selective catalysts. Herein, we report a general strategy to boost the activity of metal–organic frameworks (MOFs) towards CO₂ reduction via ligand doping. A strong electron‐donating molecule of 1,10‐phenanthroline was doped into Zn‐based MOFs of zeolitic imidazolate framework‐8 (ZIF‐8) as CO₂ reduction electrocatalyst. Experimental and theoretical evidences reveal that the electron‐donating nature of phenanthroline enables a charge transfer, which induces adjacent active sites at the sp² C atoms in the imidazole ligand possessing more electrons, and facilitates the generation of *COOH, hence leading to improved activity and Faradaic efficiency towards CO production.     

Exfoliated 2D Layered and Nonlayered Metal Phosphorous Trichalcogenides Nanosheets as Promising Electrocatalysts for CO2 Reduction

Two-dimensional (2D) materials catalysts provide an atomic-scale view on a fascinating arena for understanding the mechanism of electrocatalytic carbon dioxide reduction (CO₂ ECR). Here, we successfully exfoliated both layered and nonlayered ultra-thin metal phosphorous trichalcogenides (MPCh₃) nanosheets via wet grinding exfoliation (WGE), and systematically investigated the mechanism of MPCh₃ as catalysts for CO₂ ECR. Unlike the layered CoPS₃ and NiPS₃ nanosheets, the active Sn atoms tend to be exposed on the surfaces of nonlayered SnPS₃ nanosheets. Correspondingly, the nonlayered SnPS₃ nanosheets exhibit clearly improved catalytic activity, showing formic acid selectivity up to 31.6 % with −7.51 mA cm⁻² at −0.65 V vs. RHE. The enhanced catalytic performance can be attributed to the formation of HCOO* via the first proton-electron pair addition on the SnPS₃ surface. These results provide a new avenue to understand the novel CO₂ ECR mechanism of Sn-based and MPCh₃-based catalysts.     

Effects of Titania on the Adsorptive and Catalytic Properties of Silica-Supported Cobalt Catalyst

A series of Ti-promoted (6 wt%) Co/SiO₂ catalysts with titania content of 0 to 10 wt% were sequentially prepared by incipient wetness impregnation, and characterized with X-ray diffraction, thermogravimetric analysis, chemisorption, temperature-programmed desorption and infrared spectroscopy. The influences of Ti addition and reduction temperature (400–700 °C) on the adsorptive behavior and the catalytic properties for CO hydrogenation were investigated. The presence of Ti decreases the adsorption capacity of the cobalt surface for H₂, but enhances activity per gram cobalt. In addition, the turnover frequency increases 2–4 times upon Ti addition at reduction temperatures of 400–700 °C. The promotion in activity is accompanied by an enhanced selectivity for higher hydrocarbons and olefins. These modifications can be rationalized by the creation of active sites for CO dissociation. The desorption of CO₂ at 100 °C during temperature-programmed desorption of CO indicates the formation of active sites for CO disproportionation. Infrared spectroscopy indicates an increase in the relative absorbance of 2060–2075 cm^?1 bands upon Ti addition, which are attributed to CO adsorbed on the defect sites of the cobalt surface. Therefore, the promotion effect of Ti may be directly related to the formation of defect sites on the cobalt surface induced by the decorated titania moieties.     

Photochemical In Situ Exfoliation of Metal–Organic Frameworks for Enhanced Visible-Light-Driven CO2 Reduction

Two novel two-dimensional metal–organic frameworks (2D MOFs), 2D-M₂TCPE (M=Co or Ni, TCPE=1,1,2,2-tetra(4-carboxylphenyl)ethylene), which are composed of staggered (4,4)-grid layers based on paddlewheel-shaped dimers, serve as heterogeneous photocatalysts for efficient reduction of CO₂ to CO. During the visible-light-driven catalysis, these structures undergo in situ exfoliation to form nanosheets, which exhibit excellent stability and improved catalytic activity. The exfoliated 2D-M₂TCPE nanosheets display a high CO evolution rate of 4174 μmol g⁻¹ h⁻¹ and high selectivity of 97.3 % for M=Co and Ni, and thus are superior to most reported MOFs. The performance differences and photocatalytic mechanisms have been studied with theoretical calculations and photoelectric experiments. This study provides new insight for the controllable synthesis of effective crystalline photocatalysts based on structural and morphological coregulation.     

Linkage Effect in the Heterogenization of Cobalt Complexes by Doped Graphene for Electrocatalytic CO2 Reduction

Immobilization of planar Co^II‐2,3‐naphthalocyanine (NapCo) complexes onto doped graphene resulted in a heterogeneous molecular Co electrocatalyst that was active and selective to reduce CO₂ into CO in aqueous solution. A systematic study revealed that graphitic sulfoxide and carboxyl dopants of graphene were the efficient binding sites for the immobilization of NapCo through axial coordination and resulted in active Co sites for CO₂ reduction. Compared to carboxyl dopants, the sulfoxide dopants further improved the electron communication between NapCo and graphene, which led to the increase of turnover frequency of the Co sites by about 3 times for CO production with a Faradic efficiency up to 97 %. Pristine NapCo in the absence of a graphene support did not display efficient electron communication with the electrode and thus failed to serve as the electrochemical active site for CO₂ reduction under the identical conditions.     

Study of the interactions between carbon monoxide and high specific surface area tin dioxideThermogravimetric analysis and FTIR spectroscopy

The interactions of CO with a high specific surface area tin dioxide was investigated by FTIR spectroscopy and thermogravimetric analysis. FTIR study of CO interactions have shown that CO can adsorb on cus (coordinatively unsaturated sites) Sn⁴⁺ cation sites (band at 2201 cm^-1). In addition, CO reacts with surface oxygen atoms. This leads to the partial reduction of SnO₂ surface and to the formation of ionised oxygen vacancies together with the release of free electrons, which are responsible for the loss of transmission. Formed CO₂ can chemisorb on specific surface sites: on basic sites to form carbonates species and on acidic sites (Sn⁴⁺-CO₂ species) which is in competition with the formation of Sn⁴⁺-CO species. TG experiment have shown that the reduction of SnO₂ by CO at 400°C occurs in two steps. First, the reduction of SnO₂ surface, which is a quick phenomenon. This has allowed to evaluate that more than 12% of reducible surface oxygens can react with CO, essentially because of the presence of a large amount of surface hydroxyl groups. The second step of the reduction of SnO₂ would be the progressive reduction of SnO₂ bulk by the slow diffusion of oxygen atoms from the bulk to the surface. This revised version was published online in July 2006 with corrections to the Cover Date.     

Partially Oxidized Palladium Nanodots for Enhanced Electrocatalytic Carbon Dioxide Reduction

Here we report a partially oxidized palladium nanodot (Pd/PdO_x) catalyst with a diameter of around 4.5 nm. In aqueous CO₂‐saturated 0.5 m KHCO₃, the catalyst displays a Faradaic efficiency (FE) of 90 % at −0.55 V vs. reversible hydrogen electrode (RHE) for carbon monoxide (CO) production, and the activity can be retained for at least 24 h. The improved catalytic activity can be attributed to the strong adsorption of CO₂^.− intermediate on the Pd/PdO_x electrode, wherein the presence of Pd²⁺ during the electroreduction reaction of CO₂ may play an important role in accelerating the carbon dioxide reduction reaction (CO₂RR). This study explores the catalytic mechanism of a partially oxidized nanostructured Pd electrocatalyst and provides new opportunities for improving the CO₂RR performance of metal systems.     

Simultaneous Capture of CO2 Boosting Its Electroreduction in the Micropores of a Metal–organic Framework

Integration of CO₂ capture capability from simulated flue gas and electrochemical CO₂ reduction reaction (eCO₂RR) active sites into a catalyst is a promising cost-effective strategy for carbon neutrality, but is of great difficulty. Herein, combining the mixed gas breakthrough experiments and eCO₂RR tests, we showed that an Ag₁₂ cluster-based metal–organic framework ( 1-NH₂ , aka Ag₁₂bpy-NH₂ ), simultaneously possessing CO₂ capture sites as “CO₂ relays” and eCO₂RR active sites, can not only utilize its micropores to efficiently capture CO₂ from simulated flue gas (CO₂ : N₂=15 : 85, at 298 K), but also catalyze eCO₂RR of the adsorbed CO₂ into CO with an ultra-high CO₂ conversion of 60 %. More importantly, its eCO₂RR performance (a Faradaic efficiency (CO) of 96 % with a commercial current density of 120 mA cm⁻² at a very low cell voltage of −2.3 V for 300 hours and the full-cell energy conversion efficiency of 56 %) under simulated flue gas atmosphere is close to that under 100 % CO₂ atmosphere, and higher than those of all reported catalysts at higher potentials under 100 % CO₂ atmosphere. This work bridges the gap between CO₂ enrichment/capture and eCO₂RR.