Bi3+‐Er3+ and Bi3+‐Yb3+ Codoped Cs2AgInCl6 Double Perovskite Near‐Infrared Emitters

Bi³⁺ and lanthanide ions have been codoped in metal oxides as optical sensitizers and emitters. But such codoping is not known in typical semiconductors such as Si, GaAs, and CdSe. Metal halide perovskite with coordination number 6 provides an opportunity to codope Bi³⁺ and lanthanide ions. Codoping of Bi³⁺ and Ln³⁺ (Ln=Er and Yb) in Cs₂AgInCl₆ double perovskite is presented. Bi³⁺‐Er³⁺ codoped Cs₂AgInCl₆ shows Er³⁺ f‐electron emission at 1540 nm (suitable for low‐loss optical communication). Bi³⁺ codoping decreases the excitation (absorption) energy, such that the samples can be excited with ca. 370 nm light. At that excitation, Bi³⁺‐Er³⁺ codoped Cs₂AgInCl₆ shows ca. 45 times higher emission intensity compared to the Er³⁺ doped Cs₂AgInCl₆. Similar results are also observed in Bi³⁺‐Yb³⁺ codoped sample emitting at 994 nm. A combination of temperature‐dependent (5.7 K to 423 K) photoluminescence and calculations is used to understand the optical sensitization and emission processes.     

Incorporating Rare-Earth Terbium(III) Ions into Cs2AgInCl6:Bi Nanocrystals toward Tunable Photoluminescence

The incorporation of impurity ions or doping is a promising method for controlling the electronic and optical properties and the structural stability of halide perovskite nanocrystals (NCs). Herein, we establish relationships between rare-earth ions doping and intrinsic emission of lead-free double perovskite Cs₂AgInCl₆ NCs to impart and tune the optical performances in the visible light region. Tb³⁺ ions were incorporated into Cs₂AgInCl₆ NCs and occupied In³⁺ sites as verified by both crystallographic analyses and first-principles calculations. Trace amounts of Bi doping endowed the characteristic emission (⁵D₄→⁷F_6-3) of Tb³⁺ ions with a new excitation peak at 368 nm rather than the single characteristic excitation at 290 nm of Tb³⁺. By controlling Tb³⁺ ions concentration, the emission colors of Bi-doped Cs₂Ag(In_1−xTb_x)Cl₆ NCs could be continuously tuned from green to orange, through the efficient energy-transfer channel from self-trapped excitons to Tb³⁺ ions. Our study provides the salient features of the material design of lead-free perovskite NCs and to expand their luminescence applications.     

Incorporating Rare‐Earth Terbium(III) Ions into Cs2AgInCl6:Bi Nanocrystals toward Tunable Photoluminescence

The incorporation of impurity ions or doping is a promising method for controlling the electronic and optical properties and the structural stability of halide perovskite nanocrystals (NCs). Herein, we establish relationships between rare‐earth ions doping and intrinsic emission of lead‐free double perovskite Cs₂AgInCl₆ NCs to impart and tune the optical performances in the visible light region. Tb³⁺ ions were incorporated into Cs₂AgInCl₆ NCs and occupied In³⁺ sites as verified by both crystallographic analyses and first‐principles calculations. Trace amounts of Bi doping endowed the characteristic emission (⁵D₄→⁷F_6‐3) of Tb³⁺ ions with a new excitation peak at 368 nm rather than the single characteristic excitation at 290 nm of Tb³⁺. By controlling Tb³⁺ ions concentration, the emission colors of Bi‐doped Cs₂Ag(In_1?xTb_x)Cl₆ NCs could be continuously tuned from green to orange, through the efficient energy‐transfer channel from self‐trapped excitons to Tb³⁺ ions. Our study provides the salient features of the material design of lead‐free perovskite NCs and to expand their luminescence applications.     

Investigation on the upconversion luminescence of Sr3AlO4F:Yb3+, Er3+, Ho3+ phosphors

To develop new emission-tunable upconversion (UC) phosphors, the Sr₃AlO₄F:5%Yb³⁺, xEr³⁺, yHo³⁺ (0 ≤ x ≤ 1%, 0 ≤ y ≤ 1%) samples were prepared by conversional solid-state reaction method, and their luminescence properties upon 980 nm excitation were studied. Upon 980 nm excitation, Yb³⁺-Er³⁺ codoped Sr₃AlO₄F shows a predominant emission peak between 645 and 700 nm which is attributed to the ⁴F_9/2-⁴I_15/2 transition of Er³⁺, and the Er³⁺ green emissions have been almost quenched. In this case, the yellowish green emitting light is obtained. The possible reason was interpreted by the energy level diagram and the proposed UC mechanism. For Yb³⁺-Ho³⁺ codoped Sr₃AlO₄F, three emissions are observed obviously which are all derived from the Ho³⁺ ion. The corresponding chromaticity coordinates indicate a red emission has been gained. To realize the tunable emission, the typical Sr₃AlO₄F:5%Yb³⁺, 0.2%Er³⁺, 1%Ho³⁺ phosphor was developed, and its emission spectrum includes the emission peaks of both Er³⁺ and Ho³⁺. Correspondingly, the sample gives a yellow emission.     

K+掺杂双钙钛矿Cs2AgInCl6的发光性质

采用固相球磨法制备了K⁺掺杂双钙钛矿Cs₂AgInCl₆纳米材料,该方法无需配体辅助,绿色环保。通过X射线衍射谱和拉曼光谱对晶体结构进行研究,通过激发光谱、发射光谱和时间分辨光谱对其发光性能进行研究。结果表明,Cs₂AgInCl₆为立方晶体,属于Fm3m空间群,由于宇称禁戒跃迁,其荧光量子产率(PLQY)低,小于0.1%。低于60%的K⁺掺杂主要取代Ag⁺的位置,引起Cs₂AgInCl₆的晶格膨胀,消除了晶格结构的反演对称性,打破了宇称禁戒跃迁,掺杂后Cs₂AgInCl₆的光致发光强度显著增强。K⁺的最佳掺杂比例为40%,Cs₂Ag_0.6K_0.4InCl₆发出中心波长为640 nm,半高宽为180 nm,平均荧光寿命达到29.2 ns,PLQY达到10.5%。当K⁺掺杂比例超过60%,K⁺开始取代Cs⁺的位置,产物发生相变,出现立方相的Cs_2-xK_1+x-yAg_yInCl₆和单斜相的Cs_2-xK_1+xInCl₆产物,这些产物由于强电子-声子耦合,非辐射复合占据主导地位。     

Er3+-Tm3+-Yb3+ tri-doped CaMoO4 upconverting phosphors in optical devices applications

The structural and optical properties of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphors prepared by chemical route have been explored. The crystalline structures of the prepared phosphors have been investigated with the help of X-ray diffraction analysis. The presence of different vibrational modes and absorption bands arising due to the transitions from the ground state to different excited states of rare earth ions have been identified using the Raman and UV-VIS-NIR absorption spectra of the developed phosphor, respectively. The concentration quenching effect on the luminescence property of the prepared materials has been explained in detail. The upconversion luminescence property of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphor annealed at different temperatures under 980 nm and 808 nm excitations have been reported. The energy transfer Er³⁺ → Tm³⁺, Yb³⁺ → Er³⁺ and Tm³⁺ has been found to be responsible for efficient UC emission. The dipole-dipole interaction is observed to be responsible for the concentration quenching of the luminescence intensity. The effect of annealing temperature on the upconversion luminescence property has been explained in detail. The results suggest that the developed tri-doped phosphor may be suitable in making the efficient NIR to visible upconverter and lighting based optical devices.     

Pressure‐Induced Emission Enhancement,Band‐Gap Narrowing,and Metallization of Halide Perovskite Cs3Bi2I9

Low‐toxicity, air‐stable bismuth‐based perovskite materials are attractive substitutes for lead halide perovskites in photovoltaic and optoelectronic devices. The structural, optical, and electrical property changes of zero‐dimensional perovskite Cs₃Bi₂I₉ resulting from lattice compression is presented. An emission enhancement under mild pressure is attributed to the increase in exciton binding energy. Unprecedented band gap narrowing originated from Bi?I bond contraction, and the decrease in bridging Bi‐I‐Bi angle enhances metal halide orbital overlap, thereby breaking through the Shockley–Queisser limit under relatively low pressure. Pressure‐induced structural evolutions correlate well with changes in optical properties, and the changes are reversible upon decompression. Considerable resistance reduction implies a semiconductor‐to‐conductor transition at ca. 28 GPa, and the final confirmed metallic character by electrical experiments indicates a wholly new electronic property.     

Upconversion Luminescence Properties of a LiNb0.3Ta0.7O3:Er3+,Yb3+ Ceramic

A co-doped LiNb_0.3Ta_0.7O₃:Er³⁺,Yb³⁺ ceramic was prepared by a high temperature solid state procedure. Under the excitation of 980 nm laser radiation, intense 660 nm red light and 550 nm green light emissions corresponding to the ⁴F_9/2→⁴I_15/2 and ²H_11/2/⁴S_3/2→⁴I_15/2 transitions of Er³⁺ were observed. The change of Yb³⁺ concentration has a more significant influence on luminous intensity than the Er³⁺ concentration. The emission of red and green lights is attributed to a two-photon process. The upconversion luminescence mechanisms were analyzed in detail.     

Confining Excitation Energy in Er3+-Sensitized Upconversion Nanocrystals through Tm3+-Mediated Transient Energy Trapping

A new class of lanthanide-doped upconversion nanoparticles are presented that are without Yb³⁺ or Nd³⁺ sensitizers in the host lattice. In erbium-enriched core–shell NaErF₄:Tm (0.5 mol %)@NaYF₄ nanoparticles, a high degree of energy migration between Er³⁺ ions occurs to suppress the effect of concentration quenching upon surface coating. Unlike the conventional Yb³⁺-Er³⁺ system, the Er³⁺ ion can serve as both the sensitizer and activator to enable an effective upconversion process. Importantly, an appropriate doping of Tm³⁺ has been demonstrated to further enhance upconversion luminescence through energy trapping. This endows the resultant nanoparticles with bright red (about 700-fold enhancement) and near-infrared luminescence that is achievable under multiple excitation wavelengths. This is a fundamental new pathway to mitigate the concentration quenching effect, thus offering a convenient method for red-emitting upconversion nanoprobes for biological applications.     

Vacuum ultraviolet and near-infrared excited luminescence properties of Ca3(PO4)2:RE, Na (RE=Tb, Yb, Er, Tm, and Ho)

Tb³⁺, Yb³⁺, Tm³⁺, Er³⁺, and Ho³⁺ doped Ca₃(PO₄)₂ were synthesized by solid-state reaction, and their luminescence properties were studied by spectra techniques. Tb³⁺-doped samples can exhibit intense green emission under VUV excitation, and the brightness for the optimal Tb³⁺ content is comparable with that of the commercial Zn₂SiO₄:Mn²⁺ green phosphor. Under near-infrared laser excitation, the upconversion luminescence spectra of Yb³⁺, Tm³⁺, Er³⁺, and Ho³⁺ doped samples demonstrate that the red, green, and blue tricolored fluorescence could be obtained by codoping Yb³⁺-Ho³⁺, Yb³⁺-Er³⁺, and Yb³⁺-Tm³⁺ in Ca₃(PO₄)₂, respectively. Good white upconversion emission with CIE chromaticity coordinates (0.358, 0.362) is achieved by quadri-doping Yb³⁺-Tm³⁺-Er³⁺-Ho³⁺ in Ca₃(PO₄)₂, in which the cross-relaxation process between Er³⁺ and Tm³⁺, producing the ¹D₂-³F₄ transition of Tm³⁺, is found. The upconversion mechanisms are elucidated through the laser power dependence of the upconverted emissions and the energy level diagrams.     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y2O2S：Eu^3＋,Bi^3＋ Phosphor

As an Hg-free lamp using phosphor, the Bi^3＋ and EH^3＋ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum ultraviolet（VUV） excitation were investigated. The VUV photoluminescent intensity of Y2O2S：Eu^3＋ was weak, however, considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S：Eu^3＋,Bi^3＋ systems. Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S：Eu^3＋,Bi^3＋ at 147 nm is mainly because the Bi^3＋ acts as a medium and effectively performs the energy transfer process： Y^3＋-O^2-→Bi^3＋→Eu^3＋, while the intense emission band at 172 nm is attributed to the absorption of the characteristic ^1So-^1P1 transition of Bi^3＋ and the direct energy transfer from Bi^3＋ to Eu^3＋. The Y2O2S：Eu^3＋,Bi^3＋ shows excellent VUV optical properties compared with the commercial （Y,Gd）BO3：Eu^3＋. Thus, the Y2O2S：Eu^3＋,Bi^3＋ can be a potential red VUV-excited candidate applied in Hg-free lamps for backlight of liquid crystal display.     

Regulating synthesis and photochromic behavior via interfacial Eu3+/Eu2+-Pb0/Pb2+ redox of the CsPbCl1.5Br1.5@ Ca0.9Eu0.1MoO4 porous composites

Halogen vacancies are regarded to play a vital role in photo-induced phase segregation and the resulting switchable emission colors in the soft mixed-halide perovskites; however, its control strategy via the balanced Pb⁰ defects remains a big challenge. The research reports the regulation of synthesis and photochromic behavior via interfacial Eu³⁺/Eu²⁺-Pb⁰/Pb²⁺ redox in composites of porous Ca_0.9Eu_0.1MoO₄ and nominal mixed-halide perovskite CsPbCl_1.5Br_1.5. The composite takes full advantage of Eu³⁺ ions with the concerns of its luminescence and variable valences. It provides an additional emission color besides the halide perovskite, manipulates the Pb⁰ defects and the resulting Br-rich domain via interfacial redox reaction in the composites. The more contents of surfaced Eu³⁺ caused by substituting the unequivalent Ca²⁺ ions and the high volume-to-surface ratio of the porous Ca_0.9Eu_0.1MoO₄ guarantees the interfacial access for the Eu³⁺ and the halides. The research provides some perspectives on the regulation of ionic valence and photoluminescence of halide perovskites with the use of lanthanide ions. The composites may find potential applications in the anti-counterfeiting field.     

Multimode Luminescence Tailoring and Improvement of Cs2NaHoCl6 Cryolite Crystals via Sb3+/Yb3+ Alloying for Versatile Photoelectric Applications

Lead-free halide double perovskites are currently gaining significant attention owing to their exceptional environmental friendliness, structural adjustability as well as self-trapped exciton emission. However, stable and efficient double perovskite with multimode luminescence and tunable spectra are still urgently needed for multifunctional photoelectric application. Herein, holmium based cryolite materials (Cs₂NaHoCl₆) with anti-thermal quenching and multimode photoluminescence were successfully synthesized. By the further alloying of Sb³⁺ (s-p transitions) and Yb³⁺ (f-f transitions) ions, its luminescence properties can be well modulated, originating from tailoring band gap structure and enriching electron transition channels. Upon Sb³⁺ substitution in Cs₂NaHoCl₆, additional absorption peaking at 334 nm results in the tremendous increase of photoluminescence quantum yield (PLQY). Meanwhile, not only the typical NIR emission around 980 nm of Ho³⁺ is enhanced, but also the red and NIR emissions show a diverse range of anti-thermal quenching photoluminescence behaviors. Furthermore, through designing Yb³⁺ doping, the up-conversion photoluminescence can be triggered by changing excitation laser power density (yellow-to-orange) and Yb³⁺ doping concentration (red-to-green). Through a combined experimental-theoretical approach, the related luminescence mechanism is revealed. In general, by alloying Sb³⁺/Yb³⁺ in Cs₂NaHoCl₆, abundant energy level ladders are constructed and more luminescence modes are derived, demonstrating great potential in multifunctional photoelectric applications.     

Lead‐Free,Air‐Stable All‐Inorganic Cesium Bismuth Halide Perovskite Nanocrystals

Lead‐based perovskite nanocrystals (NCs) have outstanding optical properties and cheap synthesis conferring them a tremendous potential in the field of optoelectronic devices. However, two critical problems are still unresolved and hindering their commercial applications: one is the fact of being lead‐based and the other is the poor stability. Lead‐free all‐inorganic perovskite Cs₃Bi₂X₉ (X=Cl, Br, I) NCs are synthesized with emission wavelength ranging from 400 to 560 nm synthesized by a facile room temperature reaction. The ligand‐free Cs₃Bi₂Br₉ NCs exhibit blue emission with photoluminescence quantum efficiency (PLQE) about 0.2 %. The PLQE can be increased to 4.5 % when extra surfactant (oleic acid) is added during the synthesis processes. This improvement stems from passivation of the fast trapping process (2–20 ps). Notably, the trap states can also be passivated under humid conditions, and the NCs exhibited high stability towards air exposure exceeding 30 days.     

Lead‐Free Silver‐Bismuth Halide Double Perovskite Nanocrystals

Lead‐free perovskite nanocrystals (NCs) were obtained mainly by substituting a Pb²⁺ cation with a divalent cation or substituting three Pb²⁺ cations with two trivalent cations. The substitution of two Pb²⁺ cations with one monovalent Ag⁺ and one trivalent Bi³⁺ cations was used to synthesize Cs₂AgBiX₆ (X=Cl, Br, I) double perovskite NCs. Using femtosecond transient absorption spectroscopy, the charge carrier relaxation mechanism was elucidated in the double perovskite NCs. The Cs₂AgBiBr₆ NCs exhibit ultrafast hot‐carrier cooling (<1 ps), which competes with the carrier trapping processes (mainly originate from the surface defects). Notably, the photoluminescence can be increased by 100 times with surfactant (oleic acid) added to passivate the defects in Cs₂AgBiCl₆ NCs. These results suggest that the double perovskite NCs could be potential materials for optoelectronic applications by better controlling the surface defects.     

Opposite effect of Li<Superscript>+</Superscript> codoping on the upconversion emissions of Er<Superscript>3+</Superscript>-doped TiO<Subscript>2</Subscript> powders

The Er³⁺-Li⁺ codoped TiO₂ powders have been prepared by the non-aqueous sol–gel method. The green and red upconversion emissions centered at about 526, 550 and 663 nm were observed by the ²H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 transitions of Er³⁺, respectively. Li⁺ codoping has opposite effect on the upconversion emissions intensities for Er³⁺-doped TiO₂ at sintering temperatures of 1,073 and 1,273 K. At 1,073 K, the Er³⁺-doped TiO₂ phase transition from anatase to rutile was accelerated with increasing Li⁺ codoping concentration, leading to the increase of crystal field symmetry of Er³⁺, thus the upconversion emissions intensities decreased. At 1,273 K, Li⁺ codoping had no effect on the phase structure of Er³⁺-doped TiO₂ and only increased the Er–O bond length, it indicated that the upconversion emissions intensities greatly enhanced because of the decrease of crystal field symmetry of Er³⁺.     

Efficient Thermally Activated Delayed Fluorescence from All-Inorganic Cesium Zirconium Halide Perovskite Nanocrystals

Thermally activated delayed fluorescence (TADF) is generally observed in solid-state organic molecules or metal-organic complexes. However, TADF in all-inorganic colloidal nanocrystals (NCs) is rare. Herein, we report the first colloidal synthesis of an air-stable all-inorganic lead-free Cs₂ZrCl₆ perovskite NCs. The Cs₂ZrCl₆ NCs exhibit long-lived triplet excited state (138.2 μs), and feature high photoluminescence (PL) quantum efficiency (QY=60.37 %) due to TADF mechanism. The emission color can be easily tuned from blue to green by synthesizing the mixed-halide Cs₂ZrBr_xCl_6−x (0≤x≤1.5) NCs. Femtosecond transient absorption and temperature dependent PL measurements are performed to clarify the emission mechanism. In addition, Bi³⁺ ions are successfully doped into Cs₂ZrCl₆ NCs, which further extends the PL properties. This work not only develops a new lead-free halide perovskite NCs for potential optoelectronic applications, but also offers unique strategies for developing new inorganic phosphors.     

Yb<Superscript>3+</Superscript> → Er<Superscript>3+</Superscript> energy transfer in Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and temperature characteristic of near-infrared photoluminescence

For the Er³⁺–Yb³⁺ codoped Al₂O₃ powders, the strong near-infrared photoluminescence (PL) centered at 1.535 μm derived from the energy transfer (ET) from Yb³⁺ to Er³⁺ was detected by a 978 nm laser diode excitation. Compared with that of Er³⁺ doped Al₂O₃ powders, the PL intensity enhanced about 9 times, the full width at half maximum (FWHM) extended from 82 to 90 nm, and the lifetime increased from 3.22 to 4.17 ms for Er³⁺–Yb³⁺ codoped Al₂O₃ powders at room temperature. The ET coefficient of 2.18 × 10⁻¹⁸ cm³ s⁻¹ from Yb³⁺ to Er³⁺ was obtained based on the rate equations. The decrease of PL intensity with increasing temperature in the range of 298–733 K was observed, due to thermally enhanced nonradiative relaxation ⁴I_13/2 → ⁴I_15/2 dominated over thermally enhanced phonon-assisted ET in the Er³⁺–Yb³⁺ codoped Al₂O₃.     

K+掺杂双钙钛矿Cs2AgInCl6的发光性质

采用固相球磨法制备了K⁺掺杂双钙钛矿Cs₂AgInCl₆纳米材料,该方法无需配体辅助,绿色环保。通过X射线衍射和拉曼光谱对晶体结构进行研究,通过激发光谱、发射光谱和时间分辨光谱对其发光性能进行研究。结果表明,Cs₂AgInCl₆为立方晶体,属于Fm3m空间群,由于宇称禁戒跃迁,其荧光量子产率(PLQY)低,小于0.1%。低于60%的K⁺掺杂主要取代Ag⁺的位置,引起Cs₂AgInCl₆的晶格膨胀,消除了晶格结构的反演对称性,打破了宇称禁戒跃迁,掺杂后Cs₂AgInCl₆的光致发光强度显著增强。K⁺的最佳掺杂比例为40%,Cs₂Ag_0.6K_0.4InCl₆材料发射中心波长为640 nm,半高宽为180 nm,平均荧光寿命达到29.2 ns,PLQY达到10.5%。当K⁺掺杂比例超过60%,K⁺开始取代Cs⁺的位置,产物发生相变,出现立方相的Cs_2-xK_1+x-yAg_yInCl₆和单斜相的Cs_2-xK_1+xInCl₆产物,这些产物由于强电子-声子耦合,非辐射复合占据主导地位。     

Lead-Free,Water-Stable A3Bi2I9 Perovskites: Crystal Growth and Blue-Emitting Quantum Dots [A=CH3NH3+, Cs+, and (Rb0.05Cs2.95)+]

Despite the great success in the increase in the power conversion efficiency of lead halide perovskite solar cells, the toxicity of lead and the unstable nature of the materials are still major concerns for their wider implementation at the industrial level. Herein, large-size single crystals (SCs) are developed in HI solution by using a temperature lowering method and nanocrystals (NCs) of A₃Bi₂I₉ perovskites [where A=CH₃NH₃⁺ (MA)⁺, Cs⁺, and (Rb_0.05Cs_2.95)⁺] are formed in ethanol (EtOH) and toluene (TOL). The stability of A₃Bi₂I₉ perovskite is investigated by immersing the SCs for 24 h and pellets for 12 h in water. Moreover, the A₃Bi₂I₉ perovskite NCs displays a promising photoluminescence quantum yield of 17.63 % and a long lifetime of 8.20 ns.