Rational Design of Ferroelectric 2D Perovskite for Improving the Efficiency of Flexible Perovskite Solar Cells Over 23 %

Despite the great progress of flexible perovskite solar cells (f-PSCs), it still faces several challenges during the homogeneous fabrication of high-quality perovskite thin films, and overcoming the insufficient exciton dissociation. To the ends, we rationally design the ferroelectric two-dimensional (2D) perovskite based on pyridine heterocyclic ring as the organic interlayer. We uncover that incorporation of the ferroelectric 2D material into 3D perovskite induces an increased built-in electric field (BEF), which enhances the exciton dissociation efficiency in the device. Moreover, the 2D seeds could assist the 3D crystallization by forming more homogeneous and highly-oriented perovskite crystals. As a result, an impressive power conversion efficiency (PCE) over 23 % has been achieved by the f-PSCs with outstanding ambient stability. Moreover, the piezo/ferroelectric 2D perovskite intrigues a decreased hole transport barriers at the ITO/perovskite interface under tensile stress, which opens new possibilities for developing highly-efficient f-PSCs.     

Electron Acceptor Molecule Doping Induced π–π Interaction to Promote Charge Transport Kinetics for Efficient and Stable 2D/3D Perovskite Solar Cells

Although the incorporation of 2D perovskite into 3D perovskite can greatly enhance intrinsic stability, power conversion efficiency (PCE) of 2D/3D perovskite is still inferior to its 3D counterpart due to poor carrier transport kinetics resulted from the quantum and dielectric confinement of 2D component. To overcome this issue, the electron acceptor molecule 1,2,4,5-tetracyanobenzene (TCNB) was introduced to trigger intermolecular π–π interaction in 2D perovskite along with the electronic doping of 2D/3D perovskite to improve charge transfer efficiency. By virtue of high electron affinity, TCNB can undergo electron transfer reaction and subsequently establish π–π interaction with 1-naphthalenemethylammonium (NMA) cations, greatly strengthening lattice rigidity and reducing exciton binding energy. Transmission electron microscopy results demonstrate that 2D phases are mainly distributed at grain boundaries, reducing defect density and weakening nonradiative recombination. Meanwhile, the p-type doping of perovskite by TCNB optimizes energy level alignment at perovskite/hole transport layer interface. Consequently, PCE of champion device is significantly boosted to 24.01 %. The unencapsulated device retains an initial efficiency close to 94 % after exposure to ambient environment for over 1000 h. This work paves a novel path for designing new mixed-dimensional perovskite solar cells with high PCE and superior stability.     

Three-dimensional quantum dynamics study of vibrational predissociation of HeI_2 van der Waals molecule for low vibrational excitation using the time-dependent wave packet method

Three-dimensional quantum mechanical calculations for vibrational predissociation of HeI2(B) van der Waals molecules are presented using the time-dependent wave packet technique within the golden rule approxima tion.The total and partial decay widths,lifetimes,rates and their dependence on initial vibrational states were obtained for HeI2 at low initial vibrational excited levels.Our calculations show that the calculated tota decay widths,lifetimes and rates agree well with those extrapolated from experimental data available The predicted total decay widths as a function of initial vibrational states exhibit highly nonlinear behavior.The very short propagation time (less.than 1 ps) required in the golden rule wave packet calculation is determined by the duration time of the final state inter-action between the fragments on the vibrationally deexcited adiabatic potential surface.The final state interaction between the fragments is shown to play an important role in determining the final rotational distri     

New results for the formation of a muoniated radical in the Mu + Br2 system: a van der Waals complex or evidence for vibrational bonding in Br-Mu-Br?

New evidence is presented for the observation of a muoniated radical in the Mu + Br(2) system, from μSR longitudinal field (LF) repolarisation studies in the gas phase, at Br(2) concentrations of 0.1 bar in a Br(2)/N(2) mixture at 300 K and at 10 bar total pressure. The LF repolarisation curve, up to a field of 4.5 kG, reveals two paramagnetic components, one for the Mu atom, formed promptly during the slowing-down process of the positive muon, with a known Mu hyperfine coupling constant (hfcc) of 4463 MHz, and one for a muoniated radical formed by fast Mu addition. From model fits to the Br(2)/N(2) data, the radical component is found to have an unusually high muon hfcc, assessed to be ～3300 MHz with an overall error due to systematics expected to exceed 10%. This high muon hfcc is taken as evidence for the observation of either the Br-Mu-Br radical, and hence of vibrational bonding in this H[combining low line]-L[combining low line]-H[combining low line] system, or of a MuBr(2) van der Waals complex formed in the entrance channel. Preliminary ab initio electronic structure calculations suggest the latter is more likely but fully rigorous calculations of the effect of dynamics on the hfcc for either system have yet to be carried out.     

Effects of ZrO2 on the Performance of CuO-ZnO-Al2O3/HZSM-5 Catalyst for Dimethyl Ether Synthesis from CO2 Hydrogenation

A series of composite catalysts were prepared by the wet mixing method,and the mass ratio of CuO-ZnO-Al_2O_3-ZrO_2 component to HZSM-5 zeolite(molar ratio of SiO_2 to Al_2O_3 being 25)was 2:1. The CuO-ZnO-Al_2O_3-ZrO_2(CuO/ZnO/Al_2O_3=3/6/1 by weight)component was prepared by a modified‘two-step’co-precipitation inethod.The effects of ZrO_2 on the performance of CuO-ZnO-Al_2O_3/HZSM-5 catalyst for dimethyl ether synthesis from CO_2 hydrogenation were investigated.It was found that ZrO_2 improved the properties of CuO-ZnO-Al_2O_3/HZSM-5 as a structural promoter.     

Is Cd2 truly a van der Waals molecule? Analysis of rotational profiles recorded at the , transitions

Rotational profiles of the ²²⁸Cd₂ isotopomer recorded in the (υ′, υ″) = (26, 0), (27, 0), (42, 0), (45, 0), (46, 0), (48, 0) vibrational bands of the transition were analysed. As a result, the , , , , and excited- as well as the ground-state rotational constants of the (¹¹⁴Cd)₂ were determined. The analysis allowed determining the absolute values for the and excited- and ground-state bond lengths, respectively. The obtained result – the – distinctly shorter than that obtained with assumption of pure ground-state van der Waals bonding, supports a theoretical prediction of a covalent admixture to the bonding. Analysis of the partially-resolved rotational profile recorded in the (υ′, υ″) = (38, 0) band of the same isotopomer recorded at the transition allowed estimating the rotational constant in the B1_u state.