Nonaqueous redox-flow batteries are an emerging energy storage technology for grid storage systems, but the development of anolytes has lagged far behind that of catholytes due to the major limitations of the redox species, which exhibit relatively low solubility and inadequate redox potentials. Herein, an aluminum-based deep-eutectic-solvent is investigated as an anolyte for redox-flow batteries. The aluminum-based deep-eutectic solvent demonstrated a significantly enhanced concentration of circa 3.2 m in the anolyte and a relatively low redox potential of 2.2 V vs. Li+/Li. The electrochemical measurements highlight that a reversible volumetric capacity of 145 Ah L−1 and an energy density of 189 Wh L−1 or 165 Wh kg−1 have been achieved when coupled with a I3−/I− catholyte. The prototype cell has also been extended to the use of a Br2-based catholyte, exhibiting a higher cell voltage with a theoretical energy density of over 200 Wh L−1. The synergy of highly abundant, dendrite-free, multi-electron-reaction aluminum anodes and environmentally benign deep-eutectic-solvent anolytes reveals great potential towards cost-effective, sustainable redox-flow batteries. 相似文献
Electrochemical energy storage with redox‐flow batteries (RFBs) under subzero temperature is of great significance for the use of renewable energy in cold regions. However, RFBs are generally used above 10 °C. Herein we present non‐aqueous organic RFBs based on 5,10,15,20‐tetraphenylporphyrin (H2TPP) as a bipolar redox‐active material (anode: [H2TPP]2?/H2TPP, cathode: H2TPP/[H2TPP]2+) and a Y‐zeolite–poly(vinylidene fluoride) (Y‐PVDF) ion‐selective membrane with high ionic conductivity as a separator. The constructed RFBs exhibit a high volumetric capacity of 8.72 Ah L?1 with a high voltage of 2.83 V and excellent cycling stability (capacity retention exceeding 99.98 % per cycle) in the temperature range between 20 and ?40 °C. Our study highlights principles for the design of RFBs that operate at low temperatures, thus offering a promising approach to electrochemical energy storage under cold‐climate conditions. 相似文献
Kinetics and selectivity of the retroaldol reaction of vanillideneacetone in the alkaline media were studied. The reaction is of first order with respect to substrate and alkali concentration. The pH dependencies of the rates of vanillin formation in the processes of lignosulfonates and vanillideneacetone oxidation agree almost quantitatively. This indicates that the retroaldol reaction plays an important role in the alkaline oxidative destruction of lignins. 相似文献
Abstract: In the present work, the kinetic behavior of vanadium-ion reactions on novel single carbon-fiber electrodes is investigated. The theory of reaction orders and charge-transfer coefficients is reviewed and typical sources of error due to incorrectly determined electrochemically active surface area, inhomogeneous current density distributions, mass transfer resistances, and aging are highlighted. The measured rate constants are in a range of 2.5 ⋅ 10−7–1.1 ⋅ 10−5 s−1 for the positive and 7.0 ⋅ 10−8–2.6 ⋅ 10−6 s−1 for the negative electrolyte. Despite these different activities of individual fibers, the reaction orders of V2+, V3+, VO2+ and VO2+ species are precisely determined as a function of the concentration and the state of charge. Moreover, charge-transfer coefficients are calculated with two different approaches based on Tafel slopes and through adjustment of the Butler-Volmer equation. 相似文献
Research on redox-flow batteries (RFBs) is currently experiencing a significant upturn, stimulated by the growing need to store increasing quantities of sustainably generated electrical energy. RFBs are promising candidates for the creation of smart grids, particularly when combined with photovoltaics and wind farms. To achieve the goal of “green”, safe, and cost-efficient energy storage, research has shifted from metal-based materials to organic active materials in recent years. This Review presents an overview of various flow-battery systems. Relevant studies concerning their history are discussed as well as their development over the last few years from the classical inorganic, to organic/inorganic, to RFBs with organic redox-active cathode and anode materials. Available technologies are analyzed in terms of their technical, economic, and environmental aspects; the advantages and limitations of these systems are also discussed. Further technological challenges and prospective research possibilities are highlighted. 相似文献
Nowadays, the synthesis of (semi)aromatic polymers from lignin derivatives is of major interest, as aromatic compounds are key intermediates in the manufacture of polymers and lignin is the main source of aromatic biobased substrates. Phenols with a variety of chemical structures can be obtained from lignin deconstruction; among them, vanillin and ferulic acid are the main ones. Depending on the phenol substrates, different chemical modifications and polymerization pathways are developed, leading to (semi)aromatic polymers covering a wide range of thermomechanical properties. This review discusses the synthesis and properties of thermosets (vinyl ester resins, cyanate ester, epoxy, and benzoxazine resins) and thermoplastic polymers (polyesters, polyanhydrides, Schiff base polymers, polyacetals, polyoxalates, polycarbonates, acrylate polymers) prepared from vanillin, ferulic acid, guaiacol, syringaldehyde, or 4‐hydroxybenzoic acid.
Electrochemical oxidative degradation is one of the most promising methods for generation of phenolic fine chemicals from the renewable feedstock lignin. High selectivity, no reagent waste, as well as cost efficiency are major advantages of this particular process. Application of Ni- and Co-based anode materials led to the best results in respect to product yield and selectivity. Interestingly, repeated use of Ni foam electrodes for electrochemical oxidative degradation resulted in significantly increased yields of vanillin, indicating a modification of the electrode surface. In particular, activation of the electrodes by electrochemical treatment of black liquor enabled an activation which further increased the electrocatalytic activity as well as the yield of the aroma chemical vanillin up to more than 100 % compared to non-activated Ni foam electrodes. Additionally, this activated electrode surface was analyzed via flowing atmospheric pressure afterglow surface desorption mass spectrometry (FAPA-MS). The measurement revealed diaminotoluene as a major compound in this adsorption layer, which indicates that this compound is partly responsible for the activation process. Most likely, electrochemical induced deposition of such an organic surface layer enhances the lipophilicity of the electrode surface and increases the accessibility of relevant structural features of lignin particles to the anodic surface, resulting in a higher yield of the desired degradation product vanillin. 相似文献
The oxidation of a number of lignin species by molecular oxygen was studied. The selectivity of the process was found to be close to that of the oxidation with nitrobenzene. The influence of lignin origin on the yields of vanillin and syringaldehyde as well as the correlation between the rates of wood delignification and the aldehydes formation are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 375–379, February, 1995. 相似文献
The biosynthesis of aromatic aldehydes and alcohols from renewable resources is currently receiving considerable attention because of an increase in demand, finite fossil resources, and growing environmental concerns. Here, a temperature‐directed whole‐cell catalyst was developed by using two novel enzymes from a thermophilic actinomycete. Ferulic acid, a model lignin derivative, was efficiently converted into vanillyl alcohol at a reaction temperature at 30 °C. However, when the temperature was increased to 50 °C, ferulic acid was mainly converted into vanillin with a productivity of 1.1 g L?1 h?1. This is due to the fact that the redundant endogenous alcohol dehydrogenases (ADHs) are not active at this temperature while the functional enzymes from the thermophilic strain remain active. As the biocatalyst could convert many other renewable cinnamic acid derivatives into their corresponding aromatic aldehydes/alcohols, this novel strategy may be extended to generate a vast array of valuable aldehydes or alcohols. 相似文献
Wide‐scale exploitation of renewable energy requires low‐cost efficient energy storage devices. The use of metal‐free, inexpensive redox‐active organic materials represents a promising direction for environmental‐friendly, cost‐effective sustainable energy storage. To this end, a liquid battery is designed using hydroquinone (H2BQ) aqueous solution as catholyte and graphite in aprotic electrolyte as anode. The working potential can reach 3.4 V, with specific capacity of 395 mA h g?1 and stable capacity retention about 99.7 % per cycle. Such high potential and capacity is achieved using only C, H and O atoms as building blocks for redox species, and the replacement of Li metal with graphite anode can circumvent potential safety issues. As H2BQ can be extracted from biomass directly and its redox reaction mimics the bio‐electrochemical process of quinones in nature, using such a bio‐inspired organic compound in batteries enables access to greener and more sustainable energy‐storage technology. 相似文献
Lignin is an underexploited side-stream of pulp and paper industry and biorefineries, being used for energy production at mill site or as low value material for dispersants or binding applications. However, an integrated process of reaction and separation can be implemented for the production of high added-value monomeric phenolic chemicals such as vanillin and syringaldehyde. In this review, the main research advances in the recovery of vanillin and syringaldehyde resulting from oxidation of lignin are addressed, covering various separation methodologies namely liquid-liquid extraction, supercritical fluid extraction, distillation, crystallization, membrane separation, and adsorption. Studies in this area started in the early years of the 20th century, but in the last decades several processes have been suggested, mainly for vanillin separation. Finding the ultimate industrially feasible process is still a necessary task and this review points out the most promising technologies and sequence of processes. 相似文献
As concerns about the safety of lithium-ions batteries (LIBs) increases, aqueous zinc-ion batteries (ZIBs) with a lower cost, higher safety, and higher co-efficiency have attracted more and more interest. However, finding suitable cathode materials is still an urgent problem in ZIBs. In recent years, a lot of significant works have been reported, including manganese-based cathodes, vanadium-based cathodes, Prussian blue analog-based materials, and sustainable quinone cathodes. In this review, some typical cathode materials are introduced. The detailed storage mechanisms and methods for improving the reaction kinetics of the zinc ions are summarized. Finally, the issues, challenges, and the research directions are provided. 相似文献
Development of cost-effective and increasingly efficient sustainable materials for energy-storage devices, such Li-ion batteries, is of crucial future importance. Herein, the preparation of carbon nanofibres from biopolymer blends of lignin (byproduct from the paper and pulp industry) and polylactic acid (PLA) or a thermoplastic elastomeric polyurethane (TPU) is described. SEM analysis shows the evolving microstructural morphology after each processing step (electrospinning, stabilisation and carbonisation). Importantly, it is possible to tailor the nanofibre porosity by utilising miscibility/immiscibility rules between lignin and the polymer additive (PLA/TPU). PLA blends (immiscible) generate porous structures whereas miscible lignin/TPU blends are solid when carbonised. Electrodes produced from 50 % PLA blends have capacity values of 611 mAh g−1 after 500 charge/discharge cycles, the highest reported to date for sustainable electrodes for Li-ion batteries. Thus, this work will promote the development of lignocellulose waste materials as high-performance energy-storage materials. 相似文献
Potassium batteries show interesting peculiarities as large-scale energy storage systems and, in this scenario, the formulation of polymer electrolytes obtained from sustainable resources or waste-derived products represents a milestone activity. In this study, a lignin-based membrane is designed by crosslinking a pre-oxidized Kraft lignin matrix with an ethoxylated difunctional oligomer, leading to self-standing membranes that are able to incorporate solvated potassium salts. The in-depth electrochemical characterization highlights a wide stability window (up to 4 V) and an ionic conductivity exceeding 10−3 S cm−1 at ambient temperature. When potassium metal cell prototypes are assembled, the lignin-based electrolyte attains significant electrochemical performances, with an initial specific capacity of 168 mAh g−1 at 0.05 A g−1 and an excellent operation for more than 200 cycles, which is an unprecedented outcome for biosourced systems in potassium batteries. 相似文献
- hydroxybenzaldehyde,vanillin and syringaldehyde etc. were separated on a Novapak C18 column (5μ 3. 9mm i. d.× 150mm) and eluted with MeOH-H2O (25:75, V/V) at a flow rate of 0. 6mL/min and detected at 254nm. Quantitative analysis was performed with piperonal instead of synthetic product . m-meconin,as the internal standard. Recoveries are 95%-98% and CV≤1%. The method is simple,rapid and reliable. 相似文献
