Tetradentate Gold(III) Complexes as Thermally Activated Delayed Fluorescence (TADF) Emitters: Microwave-Assisted Synthesis and High-Performance OLEDs with Long Operational Lifetime

Structurally robust tetradentate gold(III)-emitters have potent material applications but are rare and unprecedented for those displaying thermally activated delayed fluorescence (TADF). Herein, a novel synthetic route leading to the preparation of highly emissive, charge-neutral tetradentate [C^C^N^C] gold(III) complexes with 5-5-6-membered chelate rings has been developed through microwave-assisted C−H bond activation. These complexes show high thermal stability and with emission origin (³IL, ³ILCT, and TADF) tuned by varying the substituents of the C^C^N^C ligand. With phenoxazine/diphenylamine substituent, we prepared the first tetradentate gold(III) complexes that are TADF emitters with emission quantum yields of up to 94 % and emission lifetimes of down to 0.62 μs in deoxygenated toluene. These tetradentate Au^III TADF emitters showed good performance in vacuum-deposited OLEDs with maximum EQEs of up to 25 % and LT₉₅ of up to 5280 h at 100 cd m⁻².     

Purely Organic Crystals Exhibit Bright Thermally Activated Delayed Fluorescence

Thermally activated delayed fluorescent (TADF) materials generally suffer from severe concentration quenching. Efficient non‐doped TADF emitters are generally highly twisted aromatic amine‐based compounds with isolated chemical moieties. Herein we demonstrate that co‐facial packing and strong π–π intermolecular interactions give rise to bright TADF emissions in non‐doped film and crystalline states within the compound 2,4‐diphenyl‐6‐(thianthren‐1‐yl)‐1,3,5‐triazine (oTE‐DRZ). Quantum chemistry simulations indicate that a disperse outer orbital of sulfur atoms, a folded thianthrene plane (for a reduced donor–acceptor distance), and a triazine acceptor with n–π* character, generate a spatially conjugated transition with a small singlet–triplet splitting energy. In company with a highly emissive non‐doped film, the corresponding organic light‐emitting diode achieved a 20.6 % external quantum efficiency, verifying its potential for high‐performance optoelectronic applications. In a crystalline state, it was verified that intra‐ and intermolecular dual TADF assisted by a hidden room‐temperature phosphorescent state. This state could preserve the long‐lived excitons while suppressing non‐radiation, and it could serve as a “spring‐board” for cascade up‐conversion processes. The oTE‐DRZ crystal showed greenish‐blue emission with a very high photoluminescent quantum yield of approximately 87 %, which is the highest among all TADF crystals reported to date.     

Highly Luminescent Pincer Gold(III) Aryl Emitters: Thermally Activated Delayed Fluorescence and Solution‐Processed OLEDs

Herein are described the synthesis, photophysical properties and applications of a series of luminescent cyclometalated Au^III complexes having an auxiliary aryl ligand. These complexes show photoluminescence with emission quantum yields of up to 0.79 in solution and 0.84 in thin films (4 wt % in PMMA) at room temperature, both of which are the highest reported values among Au^III complexes. Thermally activated delayed fluorescence (TADF) is the emission origin for some of these complexes. Solution‐processed OLEDs made with these complexes showed sky‐blue to green electroluminescence with external quantum efficiencies (EQEs) of up to 23.8 %, current efficiencies of up to 70.4 cd A⁻¹, and roll‐off of down to 1 %, highlighting the bright prospect of Au^III‐TADF emitters in OLEDs.     

Thermally Activated Delayed Fluorescence in an Organic Cocrystal: Narrowing the Singlet–Triplet Energy Gap via Charge Transfer

Harvesting non‐emissive spin‐triplet charge‐transfer (CT) excitons of organic semiconductors is fundamentally important for increasing the operation efficiency of future devices. Here we observe thermally activated delayed fluorescence (TADF) in a 1:2 CT cocrystal of trans‐1,2‐diphenylethylene (TSB) and 1,2,4,5‐tetracyanobenzene (TCNB). This cocrystal system is characterized by absorption spectroscopy, variable‐temperature steady‐state and time‐resolved photoluminescence spectroscopy, single‐crystal X‐ray diffraction, and first‐principles calculations. These data reveal that intermolecular CT in cocrystal narrows the singlet–triplet energy gap and therefore facilitates reverse intersystem crossing (RISC) for TADF. These findings open up a new way for the future design and development of novel TADF materials.     

Deep‐Red to Near‐Infrared Thermally Activated Delayed Fluorescence in Organic Solid Films and Electroluminescent Devices

The design and synthesis of highly efficient deep red (DR) and near‐infrared (NIR) organic emitting materials with characteristic of thermally activated delayed fluorescence (TADF) still remains a great challenge. A strategy was developed to construct TADF organic solid films with strong DR or NIR emission feature. The triphenylamine (TPA) and quinoxaline‐6,7‐dicarbonitrile (QCN) were employed as electron donor (D) and acceptor (A), respectively, to synthesize a TADF compound, TPA‐QCN. The TPA‐QCN molecule with orange‐red emission in solution was employed as a dopant to prepare DR and NIR luminescent solid thin films. The high doped concentration and neat films exhibited efficient DR and NIR emissions, respectively. The highly efficient DR and NIR organic light‐emitting devices (OLEDs) were fabricated by regulating TPA‐QCN dopant concentration in the emitting layers.     

Dual‐Phase Thermally Activated Delayed Fluorescence Luminogens: A Material for Time‐Resolved Imaging Independent of Probe Pretreatment and Probe Concentration

Developing luminescent probes with long lifetime and high emission efficiency is essential for time‐resolved imaging. However, the practical applications usually suffer from emission quenching of traditional luminogens in aggregated states, or from weak emission of aggregation‐induced emission type luminogens in monomeric states. Herein, we overcome this dilemma by a rigid‐and‐flexible alternation design in donor–acceptor–donor skeletons, to achieve a thermally activated delayed fluorescence luminogen with high emission efficiency both in the monomeric state (quantum yield up to 35.3 %) and in the aggregated state (quantum yield up to 30.8 %). Such a dual‐phase strong and long‐lived emission allows a time‐resolved luminescence imaging, with an efficiency independent of probe pretreatment and probe concentration. The findings open opportunities for developing luminescent probes with a usage in larger temporal and spatial scales.     

Axially Chiral TADF-Active Enantiomers Designed for Efficient Blue Circularly Polarized Electroluminescence

The use of a chiral, emitting skeleton for axially chiral enantiomers showing activity in thermally activated delayed fluorescence (TADF) with circularly polarized electroluminescence (CPEL) is proposed. A pair of chiral stable enantiomers, (−)-(S)-Cz-Ax-CN and (+)-(R)-Cz-Ax-CN, was designed and synthesized. The enantiomers, both exhibiting intramolecular π-conjugated charge transfer (CT) and spatial CT, show TADF activities with a small singlet–triplet energy difference (ΔE_ST) of 0.029 eV and mirror-image circularly polarized luminescence (CPL) activities with large g_lum values. Notably, CP-OLEDs based on the enantiomers feature blue electroluminescence centered at 468 nm with external quantum efficiencies (EQEs) of 12.5 and 12.7 %, and also show intense CPEL with g_EL values of −1.2×10⁻² and +1.4×10⁻², respectively. These are the first CP-OLEDs based on TADF-active enantiomers with efficient blue CPEL.     

Red/Near‐Infrared Thermally Activated Delayed Fluorescence OLEDs with Near 100 % Internal Quantum Efficiency

Developing red thermally activated delayed fluorescence (TADF) emitters, attainable for both high‐efficient red organic light‐emitting diodes (OLEDs) and non‐doped deep red/near‐infrared (NIR) OLEDs, is challenging. Now, two red emitters, BPPZ‐PXZ and mDPBPZ‐PXZ, with twisted donor–acceptor structures were designed and synthesized to study molecular design strategies of high‐efficiency red TADF emitters. BPPZ‐PXZ employs the strictest molecular restrictions to suppress energy loss and realizes red emission with a photoluminescence quantum yield (Φ_PL) of 100±0.8 % and external quantum efficiency (EQE) of 25.2 % in a doped OLED. Its non‐doped OLED has an EQE of 2.5 % owing to unavoidable intermolecular π–π interactions. mDPBPZ‐PXZ releases two pyridine substituents from its fused acceptor moiety. Although mDPBPZ‐PXZ realizes a lower EQE of 21.7 % in the doped OLED, its non‐doped device shows a superior EQE of 5.2 % with a deep red/NIR emission at peak of 680 nm.     

Polymorph-Dependent Thermally Activated Delayed Fluorescence Emitters: Understanding TADF from a Perspective of Aggregation State

Current research on thermally activated fluorescence (TADF) emitters is mainly based on the molecular levels, while the aggregation states of TADF emitters are to be explored deeply. Now two multifunctional emitters are reported with simultaneous TADF, aggregation induced emission (AIE), and multicolor mechanochromic luminescence (MCL) features. Both emitters also show polymorph-dependent TADF emission. Crystal structure analysis reveals that the polymorphism is ascribed to the mutable conformations in different aggregation states. This work brings new insight to TADF emitters from a perspective of aggregation states.     

Four‐Coordinate Boron Emitters with Tridentate Chelating Ligand for Efficient and Stable Thermally Activated Delayed Fluorescence Organic Light‐Emitting Devices

A new class of four‐coordinate donor‐acceptor fluoroboron‐containing thermally activated delayed fluorescence (TADF) compounds bearing a tridentate 2,2′‐(pyridine‐2,6‐diyl)diphenolate (dppy) ligand has been successfully designed and synthesized. Upon varying the donor moieties from carbazole to 10H‐spiro[acridine‐9,9′‐fluorene] to 9,9‐dimethyl‐9,10‐dihydroacridine, these boron derivatives exhibit a wide range of emission colors spanning from blue to yellow with a large spectral shift of 2746 cm^?1, with high PLQYs of up to 96 % in the doped thin film. Notably, vacuum‐deposited organic light‐emitting devices (OLEDs) made with these boron compounds demonstrate high performances with the best current efficiencies of 55.7 cd A^?1, power efficiencies of 58.4 lm W^?1 and external quantum efficiencies of 18.0 %. More importantly, long operational stabilities of the green‐emitting OLEDs based on 2 with half‐lifetimes of up to 12 733 hours at an initial luminance of 100 cd m^?2 have been realized. This work represents for the first time the design and synthesis of tridentate dppy‐chelating four‐coordinate boron TADF compounds for long operational stabilities, suggesting great promises for the development of stable boron‐containing TADF emitters.     

Adamantane‐Substituted Acridine Donor for Blue Dual Fluorescence and Efficient Organic Light‐Emitting Diodes

To date, blue dual fluorescence emission (DFE) has not been realized because of the limited choice of chemical moieties and severe geometric deformation of the DFE emitters leading to strong intramolecular charge transfer (ICT) with a large Stokes shift in excited states. Herein, an emitter (1′r,5′R,7′S)‐10‐(4‐(4,6‐diphenyl‐1,3,5‐triazin‐2‐yl)phenyl)‐10H‐spiro [acridine‐9,2′‐adamantane] (a‐DMAc‐TRZ) containing a novel adamantane‐substituted acridine donor is reported, which exhibits unusual blue DFE. The introduction of the rigid and bulky adamantane moiety not only suppressed the geometry relaxation in excited state, but also induced the formation of quasi‐axial conformer (QAC) and quasi‐equatorial conformer (QEC) geometries, leading to deep‐blue conventional fluorescence and sky‐blue thermally activated delayed fluorescence (TADF). The resulting organic light‐emitting diodes (OLEDs) achieved a maximum external quantum efficiency (EQE) of about 29 %, which is the highest reported for OLEDs based on dual‐conformation emitters.     

Molecular Design of Non-doped OLEDs Based on a Twisted Heptagonal Acceptor: A Delicate Balance between Rigidity and Rotatability

The development of efficient non-doped organic light-emitting diodes (OLEDs) is highly desired but very challenging because of a severe aggregation-caused quenching effect. Herein, we present a heptagonal diimide acceptor (BPI), which can restrict excessive intramolecular rotation and inhibit close intermolecular π–π stacking due to well-balanced rigidity and rotatability of heptagonal structure. The BPI-based luminogen ( DMAC-BPI ) shows significant aggregation-induced delayed florescence with an extremely high photoluminescence quantum yield (95.8 %) of the neat film, and the corresponding non-doped OLEDs exhibit outstanding electroluminescence performance with maximum external quantum efficiency as high as 24.7 % and remarkably low efficiency roll-off as low as 1.0 % at 1000 cd m⁻², which represents the state-of-the-art performance for non-doped OLEDs. In addition, the synthetic route to DMAC-BPI is greatly streamlined and simplified through oxidative Ar−H/Ar−H homo-coupling reaction.     

Donor–σ–Acceptor Motifs: Thermally Activated Delayed Fluorescence Emitters with Dual Upconversion

A family of organic emitters with a donor–σ–acceptor (D‐σ‐A) motif is presented. Owing to the weakly coupled D‐σ‐A intramolecular charge‐transfer state, a transition from the localized excited triplet state (³LE) and charge‐transfer triplet state (³CT) to the charge‐transfer singlet state (¹CT) occurred with a small activation energy and high photoluminescence quantum efficiency. Two thermally activated delayed fluorescence (TADF) components were identified, one of which has a very short lifetime of 200–400 ns and the other a longer TADF lifetime of the order of microseconds. In particular, the two D‐σ‐A materials presented strong blue emission with TADF properties in toluene. These results will shed light on the molecular design of new TADF emitters with short delayed lifetimes.     

Tri‐Spiral Donor for High Efficiency and Versatile Blue Thermally Activated Delayed Fluorescence Materials

Blue thermally activated delayed fluorescence (TADF) emitters that can simultaneously achieve high efficiency in doped and nondoped organic light‐emitting diodes (OLEDs) are rarely reported. Reported here is a strategy using a tri‐spiral donor for such versatile blue TADF emitters. Impressively, by simply extending the nonconjugated fragment and molecular length, aggregation‐caused emission quenching (ACQ) can be greatly alleviated to achieve as high as a 90 % horizontal orientation dipole ratio and external quantum efficiencies (EQEs) of up to 33.3 % in doped and 20.0 % in nondoped sky‐blue TADF‐OLEDs. More fascinatingly, a high‐efficiency purely organic white OLED with an outstanding EQE of up to 22.8 % was also achieved by employing TspiroS‐TRZ as a blue emitter and an assistant host. This compound is the first blue TADF emitter that can simultaneously achieve high electroluminescence (EL) efficiency in doped, nondoped sky‐blue, and white TADF‐OLEDs.     

Developing Through‐Space Charge Transfer Polymers as a General Approach to Realize Full‐Color and White Emission with Thermally Activated Delayed Fluorescence

Through‐space charge transfer polymers (TSCT polymers) that contain a non‐conjugated polystyrene backbone and spatially separated donor and acceptor units for solution‐processed OLEDs with full‐color and white emission is reported. By tuning the charge transfer strength between donor and acceptors with different electron‐accepting ability, emission color spanning from deep blue to red can be achieved. By incorporating two kinds of donor/acceptor pairs in one polymer to create duplex through‐space charge‐transfer channels, blue and yellow emission can be simultaneously obtained to realize white electroluminescence from a single polymer. The TSCT polymers exhibit thermally activated delayed fluorescence effect with delayed‐component lifetimes in range of 0.36–1.98 μs, and unexpected aggregation‐induced emission (emission intensity enhancement of up to 117 from solution to aggregation state).     

SCOTfluors: Small,Conjugatable, Orthogonal,and Tunable Fluorophores for In Vivo Imaging of Cell Metabolism

The transport and trafficking of metabolites are critical for the correct functioning of live cells. However, in situ metabolic imaging studies are hampered by the lack of fluorescent chemical structures that allow direct monitoring of small metabolites under physiological conditions with high spatial and temporal resolution. Herein, we describe SCOTfluors as novel small‐sized multi‐colored fluorophores for real‐time tracking of essential metabolites in live cells and in vivo and for the acquisition of metabolic profiles from human cancer cells of variable origin.     

Through-Space Charge-Transfer Polynorbornenes with Fixed and Controllable Spatial Alignment of Donor and Acceptor for High-Efficiency Blue Thermally Activated Delayed Fluorescence

Through-space charge transfer polynorbornenes with fixed and controllable spatial alignment of donor and acceptor in edge-to-face/face-to-face stacking patterns are developed for achieving high-efficiency blue thermally activated delayed fluorescence (TADF). The alignment is realized by using the cis, exo-configuration of norbornene to confine donor and acceptor in close proximity, and utilizing orthogonal and dendritic structures of donors to provide either perpendicular or parallel stacking motif relative to acceptors. Compared to edge-to-face counterparts, polynorbornenes with face-to-face aligned donor and acceptor exhibit much larger oscillator strength and higher photoluminescence quantum yield. The resulting polymers exhibit deep blue (422 nm) to sky blue (482 nm) emission and TADF effect with reverse intersystem crossing rates of 0.4–5.9×10⁶ s⁻¹, giving the maximum external quantum efficiency of 18.8 % for non-doped blue organic light-emitting diodes by solution process.     

Aggregation-Enhanced Emission and Thermally Activated Delayed Fluorescence of Derivatives of 9-Phenyl-9H-Carbazole: Effects of Methoxy and tert-Butyl Substituents

Derivatives of 9-phenyl-9H-carbazole were synthesized as efficient emitters exhibiting both thermally activated delayed fluorescence and aggregation-induced emission enhancement. Effects of methoxy and tert-butyl substituents at the different positions of carbazolyl groups on the properties of the emitters were studied. Depending on the substitutions, photoluminescence quantum yields (PLQY) of non-doped solid films of the compounds ranged from 17 % to 53 % which were much higher than those observed for the solutions in low-polarity solvent toluene. Compounds substituted at C-3 and C-6 positions of carbazole moiety by methoxy- and tert-butyl- groups showed the highest solid-state PLQY. Ionization potentials of the studied derivatives in solid-state were found to be in the short range of 5.75–5.89 eV. Well-balanced hole and electron mobilities were detected for tert-butyl-substituted compound. They exceeded 10⁻⁴ cm² (V×s)⁻¹ at electric fields higher than 3×10⁵ V cm⁻¹. Two compounds with the highest solid-state PLQYs showed higher efficiencies in non-doped organic light-emitting diodes than in the doped devices. Maximum external quantum efficiency of 7.2 % and brightness of 15000 cd m⁻² were observed for the best device.     

Thermally Activated Delayed Fluorescence of a Dinuclear Platinum(II) Compound: Mechanism and Roles of an Upper Triplet State

A dinuclear Pt(II) compound was reported to exhibit thermally activated delayed fluorescence (TADF); however, the luminescence mechanism remains elusive. To reveal relevant excited-state properties and luminescence mechanism of this Pt(II) compound, both density function theory (DFT) and time-dependent DFT (TD-DFT) calculations were carried out in this work. In terms of the results, the S₁ and T₂ states show mixed intraligand charge transfer (ILCT)/metal-to-ligand CT (MLCT) characters while the T₁ state exhibits mixed ILCT/ligand-to-metal CT (LMCT) characters. Mechanistically, a four-state (S₀, S₁, T₁, and T₂) model is proposed to rationalize the TADF behavior. The reverse intersystem crossing (rISC) process from the initial T₁ to final S₁ states involves two up-conversion channels (direct T₁→S₁ and T₂-mediated T₁→T₂→S₁ pathways) and both play crucial roles in TADF. At 300 K, these two channels are much faster than the T₁ phosphorescence emission enabling TADF. However, at 80 K, these rISC rates are reduced by several orders of magnitude and become very small, which blocks the TADF emission; instead, only the phosphorescence is observed. These findings rationalize the experimental observation and could provide useful guidance to rational design of organometallic materials with superior TADF performances.