Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Self-Assembled Two-Dimensional NiO/CeO2 Heterostructure Rich in Oxygen Vacancies as Efficient Bifunctional Electrocatalyst for Alkaline Hydrogen Evolution and Oxygen Evolution

The development of high-efficiency bifunctional electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline surroundings is essential and challenging for the large-scale generation of clean hydrogen. Herein, a novel self-assembled two-dimensional (2 D) NiO/CeO₂ heterostructure (HS) consisting of NiO and CeO₂ nanocrystals is prepared through a facile two-step approach, and utilized as an enhanced bifunctional electrocatalyst for the HER and OER under alkaline conditions. It is concluded that this 2 D NiO/CeO₂ HS, rich in oxygen vacancies, demonstrates attractive electrocatalytic properties for both the HER and OER in 1 m KOH, including low onset overpotential (η₁), η₁₀ and Tafel slope, excellent durability, as well as large active surface area. Therefore, the self-assembled 2 D NiO/CeO₂ HS is believed to be an efficient bifunctional electrocatalyst toward the HER and OER.     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Molybdenum-induced tuning 3d-orbital electron filling degree of CoSe2 for alkaline hydrogen and oxygen evolution reactions

The development of high-performance non-precious metal-based robust bifunctional electrocatalyst for both hydrogen evolution reaction(HER) and oxygen evolution reactions(OER) in alkaline media is essential for the electrochemical overall water splitting technologies. Herein, we demonstrate that the HER/OER performance of Co Se₂ can be significantly enhanced by tuning the 3d-orbital electron filling degree through Mo doping. Both density functional theory(DFT) calculations and experime...     

General π‐Electron‐Assisted Strategy for Ir,Pt, Ru,Pd, Fe,Ni Single‐Atom Electrocatalysts with Bifunctional Active Sites for Highly Efficient Water Splitting

Both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are crucial to water splitting, but require alternative active sites. Now, a general π‐electron‐assisted strategy to anchor single‐atom sites (M=Ir, Pt, Ru, Pd, Fe, Ni) on a heterogeneous support is reported. The M atoms can simultaneously anchor on two distinct domains of the hybrid support, four‐fold N/C atoms (M@NC), and centers of Co octahedra (M@Co), which are expected to serve as bifunctional electrocatalysts towards the HER and the OER. The Ir catalyst exhibits the best water‐splitting performance, showing a low applied potential of 1.603 V to achieve 10 mA cm^?2 in 1.0 m KOH solution with cycling over 5 h. DFT calculations indicate that the Ir@Co (Ir) sites can accelerate the OER, while the Ir@NC₃ sites are responsible for the enhanced HER, clarifying the unprecedented performance of this bifunctional catalyst towards full water splitting.     

General π‐Electron‐Assisted Strategy for Ir,Pt, Ru,Pd, Fe,Ni Single‐Atom Electrocatalysts with Bifunctional Active Sites for Highly Efficient Water Splitting

Both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are crucial to water splitting, but require alternative active sites. Now, a general π‐electron‐assisted strategy to anchor single‐atom sites (M=Ir, Pt, Ru, Pd, Fe, Ni) on a heterogeneous support is reported. The M atoms can simultaneously anchor on two distinct domains of the hybrid support, four‐fold N/C atoms (M@NC), and centers of Co octahedra (M@Co), which are expected to serve as bifunctional electrocatalysts towards the HER and the OER. The Ir catalyst exhibits the best water‐splitting performance, showing a low applied potential of 1.603 V to achieve 10 mA cm^?2 in 1.0 m KOH solution with cycling over 5 h. DFT calculations indicate that the Ir@Co (Ir) sites can accelerate the OER, while the Ir@NC₃ sites are responsible for the enhanced HER, clarifying the unprecedented performance of this bifunctional catalyst towards full water splitting.     

Ir Nanoparticles Anchored on Metal-Organic Frameworks for Efficient Overall Water Splitting under pH-Universal Conditions

The construction of high-activity and low-cost electrocatalysts is critical for efficient hydrogen production by water electrolysis. Herein, we developed an advanced electrocatalyst by anchoring well-dispersed Ir nanoparticles on nickel metal-organic framework (MOF) Ni-NDC (NDC: 2,6-naphthalenedicarboxylic) nanosheets. Benefiting from the strong synergy between Ir and MOF through interfacial Ni−O−Ir bonds, the synthesized Ir@Ni-NDC showed exceptional electrocatalytic performance for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting in a wide pH range, superior to commercial benchmarks and most reported electrocatalysts. Theoretical calculations revealed that the charge redistribution of Ni−O−Ir bridge induced the optimization of H₂O, OH* and H* adsorption, thus leading to the accelerated electrochemical kinetics for HER and OER. This work provides a new clue to exploit bifunctional electrocatalysts for pH-universal overall water splitting.     

In Situ Growth of Ultrafine Pt Nanoparticles onto Hierarchical Co3O4 Nanosheet-Assembled Microflowers for Efficient Electrocatalytic Hydrogen Evolution

The development of Pt-based electrocatalysts with high Pt utilization efficiency toward the hydrogen evolution reaction (HER) is of great significance for the future sustainable hydrogen economy. For rational design of high-performance HER electrocatalyst, the simultaneous consideration of both thermodynamic and kinetic aspects remains greatly challenging. Herein, a simple template-derived strategy is demonstrated for the in situ growth of ultrafine Pt nanoparticles onto Co₃O₄ nanosheet-assembled microflowers (abbreviated as Pt/Co₃O₄ microflowers hereafter) by using the pre-fabricated PtCo-based Hofmann coordination polymer as reactive templates. The elaborate preparation of such intriguing hierarchical architecture with well-dispersed tiny Pt nanoparticles, abundant metal/oxide heterointerfaces and open configuration endows the formed Pt/Co₃O₄ microflowers with high Pt utilization efficiency, rich active sites, lowered energy barrier for water dissociation and expedited reaction kinetics. Consequently, the Pt/Co₃O₄ microflowers exhibit superior HER activity with a relatively low overpotential of 34 mV to deliver a current density of 10 mA cm⁻², small Tafel slope (34 mV dec⁻¹) and outstanding electrochemical stability, representing an attractive electrocatalyst for practical water splitting. What's more, our concept of in situ construction of metal/oxide heterointerfaces may provide a new opportunity to design high-performance electrocatalysts for a variety of applications.     

氧空位和磷掺杂协同增强铁钴基材料电解水催化性能

为了研发高效、稳定的电解水催化剂,我们以氧空位和磷掺杂为基础,通过原位浸泡生长和两步热处理的方法,在泡沫铁上合成具有氧空位和磷掺杂的纳米花结构作为析氢反应(HER)和析氧反应(OER)双功能电催化剂。CoFe₂O₄已被报道为一种很有前途的OER和氧还原反应(ORR)电催化剂,然而CoFe₂O₄在HER中表现出电导率差、电催化反应慢的特性。CoFe₂O₄中氧空位(Ov)的形成可以有效调控催化剂表面的电子结构,有助于产生更多的缺陷和空位,从而提高OER的活性。随后,引入磷原子填充在空位中,制备的P-Ov-CoFe₂O₄/IF在碱性电催化测试中展现出优异的HER和OER性能,在10 mA·cm^-2电流密度下HER和OER过电位仅为54和191 mV,Tafel斜率分别为57和54 mV·dec^-1,并具有良好的循环稳定性。     

High-performance electrocatalyst of vanadium-iron bimetal organic framework arrays on nickel foam for overall water splitting

The development of active,low-cost and durable bifunctional electrocatalysts toward both oxygen evolution reaction(OER) and hydro gen evolution react ion(HER) a re important for overall water splitting.Here,well-defined arrays of vanadium-iron bimetal organic frameworks(VFe-MOF) with controllable stoichiometry have been successfully prepared on nickel foam(NF).The as-fabricated VFe-MOF@NF electrode exhibits excellent electrocatalytic activity and durability for OER and HER in alkaline medium.The material's overpotentials of 10 mA/cm~2 are 246 mV for OER and 147 mV for HER,respectively.The electrolyzer made from the VFe-MOF@NF electrodes as both the cathode and anode in 1 mol/L KOH needs only a voltage of 1.61 V to reach a current density of 10 mA/cm~2.The superior performance of VFeMOF@NF can be attributed to the morphological control and electronic regulation of the bimetals,that is,1) the exposure of the active sites at electrocatalyst/electrolyte interfaces due to the array structure;2)the synergistic effect of vanadium and iron metals on electro-catalyzing the overall water splitting.     

Hollow Heterostructured Nanocatalysts for Boosting Electrocatalytic Water Splitting

The implementation of electrochemical water splitting demands the development and application of electrocatalysts to overcome sluggish reaction kinetics of hydrogen/oxygen evolution reaction (HER/OER). Hollow nanostructures, particularly for hollow heterostructured nanomaterials can provide multiple solutions to accelerate the HER/OER kinetics owing to their advantageous merit. Herein, the recent advances of hollow heterostructured nanocatalysts and their excellent performance for water splitting are systematically summarized. Starting by illustrating the intrinsically advantageous features of hollow heterostructures, achievements in engineering hollow heterostructured electrocatalysts are also highlighted with the focus on structural design, interfacial engineering, composition regulation, and catalytic evaluation. Finally, some perspective insights and future challenges of hollow heterostructured nanocatalysts for electrocatalytic water splitting are also discussed.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Polyoxometalate-Based Compounds for Photo- and Electrocatalytic Applications

Photo/electrocatalysis of water (H₂O) splitting and CO₂ reduction reactions is a promising strategy to alleviate the energy crisis and excessive CO₂ emissions. For the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and CO₂ reduction reaction (CO₂RR) involved, the development of effective photo/electrocatalysts is critical to reduce the activation energy and accelerate the sluggish dynamics. Polyoxometalate (POM)-based compounds with tunable compositions and diverse structures are emerging as unique photo/electrocatalysts for these reactions as they offer unparalleled advantages such as outstanding solution and redox stability, quasi-semiconductor behaviour, etc. This Minireview provides a basic introduction related to photo/electrocatalytic HER, OER and CO₂RR, followed by the classification of pristine POM-based compounds toward different catalytic reactions. Recent breakthroughs in engineering POM-based compounds as efficient photo/electrocatalysts are highlighted. Finally, the advantages, challenges, strategies and outlooks of POM-based compounds on improving photo/electrocatalytic performance are discussed.     

Nickel-iron borate coated nickel-iron boride hybrid for highly stable and active oxygen evolution electrocatalysis

The development of efficient and cost-effective electrocatalysts toward anodic oxygen evolution reaction (OER) is crucial for the commercial application of electrochemical water splitting. As the most promising electrocatalysts, the OER performances of nickel-iron-based materials can be further improved by introducing metalloid elements to modify their electron structures. Herein, we developed an efficient hybrid electrocatalyst with nickel-iron boride (NiFeB) as core and amorphous nickel-iron borate (NiFeB_i) as shell (NiFeB@NiFeB_i) via a simple aqueous reduction. The obtained NiFeB@NiFeB_i exhibits a small overpotential of 237 mV at 10 mA/cm² and Tafel slope of 57.65 mV/dec in 1.0 mol/L KOH, outperforming most of the documented precious-metal-free based electrocatalysts. Benefiting from the in situ formed amorphous NiFeBi layer, it shows excellent stability toward the oxygen evolution reaction (OER). These findings might provide a new way to design advanced precious-metal-free electrocatalysts for OER and the application of electrochemical water splitting.     

Heteroatom‐doped MoSe2 Nanosheets with Enhanced Hydrogen Evolution Kinetics for Alkaline Water Splitting

Electrochemical water splitting for hydrogen generation is a vital part for the prospect of future energy systems, however, the practical utilization relies on the development of highly active and earth‐abundant catalysts to boost the energy conversion efficiency as well as reduce the cost. Molybdenum diselenide (MoSe₂) is a promising nonprecious metal‐based electrocatalyst for hydrogen evolution reaction (HER) in acidic media, but it exhibits inferior alkaline HER kinetics in great part due to the sluggish water adsorption/dissociation process. Herein, the alkaline HER kinetics of MoSe₂ is substantially accelerated by heteroatom doping with transition metal ions. Specifically, the Ni‐doped MoSe₂ nanosheets exhibit the most impressive catalytic activity in terms of lower overpotential and larger exchange current density. The density functional theory (DFT) calculation results reveal that Ni/Co doping plays a key role in facilitating water adsorption as well as optimizing hydrogen adsorption. The present work paves a new way to the development of low‐cost and efficient electrocatalysts towards alkaline HER.     

Hierarchical NiCo2O4 Hollow Microcuboids as Bifunctional Electrocatalysts for Overall Water‐Splitting

Bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte may improve the efficiency of overall water splitting. Nickel cobaltite (NiCo₂O₄) has been considered a promising electrode material for the OER. However, NiCo₂O₄ that can be used as an electrocatalyst in HER has not been studied yet. Herein, we report self‐assembled hierarchical NiCo₂O₄ hollow microcuboids for overall water splitting including both the HER and OER reactions. The NiCo₂O₄ electrode shows excellent activity toward overall water splitting, with 10 mA cm^?2 water‐splitting current reached by applying just 1.65 V and 20 mA cm^?2 by applying just 1.74 V across the two electrodes. The synthesis of NiCo₂O₄ microflowers confirms the importance of structural features for high‐performance overall water splitting.     

Flower-like NiCo2S4/NiFeP/NF composite material as an effective electrocatalyst with high overall water splitting performance

Rational design and building of high efficiency, secure and inexpensive electrocatalyst is a pressing demand and performance to promote sustainable improvement of hydrogen energy. The bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution response (HER) with high catalytic performance and steadiness in the equal electrolyte are extra treasured and meaningful. Herein, a unique three-dimensional (3D) structure electrocatalyst for NiCo₂S₄ growing on the flower-like NiFeP was designed and synthesized in this study. The results show that the flower-like NiCo₂S₄/NiFeP/NF composite electrocatalyst has large specific surface area, appropriate electrical conductivity, and greater lively websites uncovered in the three-dimensional structure, and affords extraordinary electrocatalytic overall performance for the ordinary water splitting. In alkaline solution, the OER and HER overpotentials of NiCo₂S₄/NiFeP/NF only need 293 mV and 205 mV overpotential to provide the current densities of 100 mA/cm² and 50 mA/cm², respectively. This high electrocatalytic activity exceeds the catalytic activity of most nickel-iron based electrocatalysts for OER and HER process. Accordingly, the optimized NiCo₂S₄/NiFeP/NF sample has higher stability (24 h) at 1.560 and 10 mA/cm², which extensively speeds up the overall water splitting process. In view of the above performance, this work offers a fine approach for the further improvement of low fee and excessive effectivity electrocatalyst.     

利用MOF-253衍生氮掺杂碳限域效应促进Pt纳米单晶电催化剂的氧析出反应

目前,为了有效解决电化学能量转化反应动力学过程缓慢和商业化应用等问题,需要大力提高催化剂的电催化活性和稳定性,并大幅降低贵金属催化剂的用量.通常,铂(Pt)基催化剂对燃料电池的氧还原反应(ORR)和水电解过程的氢析出反应(HER)表现出很高的活性.然而,对于高效的金属-空气电池和水电解装置,其中的氧析出反应(OER)则需要高活性的非Pt电催化剂来降低电化学过电位及提高其对高电位的耐受性.虽然相较于Pt催化剂,IrO2和RuO2等贵金属催化剂表现出了更高的OER活性,然而,它们的稳定性差,难以满足实际应用需求,严重阻碍了其在金属-空气电池和水电解中的应用.通常,Pt对OER的低效催化主要归因于在OER电催化过程中Pt与电解液直接接触,导致Pt表面快速被氧化,形成Pt氧化物(Pt^+4O2和Pt^+2O)层.形成的Pt氧化物对OER不起催化作用,从而降低了Pt的利用率和总的水电解效率.为了避免Pt表面的快速氧化,实现高的OER性能,我们将Pt金属纳米粒子有效地限域在超薄功能多孔碳层内.前期,已有大量的有关金属基ORR和HER催化剂研究证明,这种策略对于稳定金属纳米颗粒非常有效,可有效避免金属催化剂的快速氧化,而且还可抑制金属颗粒迁移和团聚;此外,还有利于增强催化剂的导电性和离子物种的扩散能力,从而提高催化剂的电催化性能.然而,要达到提高金属催化剂OER电催化性能的目的,还需要设计一种具有优良结构的功能化异质原子掺杂多孔碳基限域材料.金属有机框架(MOF),特别是MOF-253,由于具有较高的柔韧性、丰富的孔、可控的几何结构和高比表面积,被认为是制备功能多孔碳基限域材料的理想前驱体.为此,通过结合功能多孔碳基材料的限域作用及MOF-253和超细Pt纳米单晶的优势,本文合成了MOF-253衍生氮掺杂碳(N/C)限域的Pt纳米单晶(Pt@N/C)核壳型电催化剂.制备的Pt-N-C框架不仅具有超薄的氮掺杂活性多孔碳保护层壳体(平均厚度为0.51 nm),还有具高度分散和稳定化的Pt纳米单晶核体;值得指出的是,因受到碳层的限域作用,即使经900℃的高温处理,Pt纳米单晶仍保持了较小的晶体尺寸(平均粒径仅为6.7 nm);此外,该催化剂的Pt载量较低,仅为6.1wt%(Pt@N/C-10).将其作为OER电催化剂,表现出优异的OER性能:在10 mA cm^-2电流密度下,其过电位仅为298 mV,低于商业IrO2催化剂(353 mV);而且,经2000周加速电位扫描后,其电位仅降低19.4 mV,也低于IrO2(23.3 mV).本文很好地证明了通过构建空间限域结构可以有效解决Pt等金属催化剂因表面氧化而导致OER动力学活性和稳定性低的问题.     

Bifunctional Electrocatalyst with 0D/2D Heterostructure for Highly Efficient Hydrogen and Oxygen Generation

A novel MoS₂ quantum dots/CoSe₂ nanosheet (MoS₂ QDs/CoSe₂) hybrid with 0D/2D heterostructure has been developed. The CoSe₂ nanosheets (NSs) enable an excellent oxygen evolution reaction (OER) activity with increasing vacancy configuration on one hand, while the MoS₂ QDs serve as an eminent hydrogen evolution reaction (HER) catalyst on the other. By integrating MoS₂ QDs and CoSe₂ NSs, the hybrid exhibits excellent electrocatalytic performances in HER and OER. The unique 0D/2D hetero‐interface increases the exposed active sites and facilitates electron transfer, thereby boosting the electrocatalytic activity. Relatively low overpotentials of 82 mV and 280 mV are required to drive the current density of 10 mA/cm² for HER and OER, with corresponding Tafel slopes of 69 and 75 mV/dec, respectively. As such, this work provides an efficient yet simple approach to construct bifunctional electrocatalysts with enhanced activity and stability.     

Channel‐Rich RuCu Nanosheets for pH‐Universal Overall Water Splitting Electrocatalysis

Channel‐rich RuCu snowflake‐like nanosheets (NSs) composed of crystallized Ru and amorphous Cu were used as efficient electrocatalysts for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting in pH‐universal electrolytes. The optimized RuCu NSs/C‐350 °C and RuCu NSs/C‐250 °C show attractive activities of OER and HER with low overpotentials and small Tafel slopes, respectively. When applied to overall water splitting, the optimized RuCu NSs/C can reach 10 mA cm^?2 at cell voltages of only 1.49, 1.55, 1.49 and 1.50 V in 1 m KOH, 0.1 m KOH, 0.5 m H₂SO₄ and 0.05 m H₂SO₄, respectively, much lower than those of commercial Ir/C∥Pt/C. The optimized electrolyzer exhibits superior durability with small potential change after up to 45 h in 1 m KOH, showing a class of efficient functional electrocatalysts for overall water splitting.