Flame‐retardant performance and mechanism of epoxy thermosets modified with a novel reactive flame retardant containing phosphorus,nitrogen, and sulfur

A novel phosphorus‐containing, nitrogen‐containing, and sulfur‐containing reactive flame retardant (BPD) was successfully synthesized by 1‐pot reaction. The intrinsic flame‐retardant epoxy resins were prepared by blending different content of BPD with diglycidyl ether of bisphenol‐A (DGEBA). Thermal stability, flame‐retardant properties, and combustion behaviors of EP/BPD thermosets were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limited oxygen index (LOI) measurement, UL94 vertical burning test, and cone calorimeter test. The flame‐retardant mechanism of BPD was studied by TGA/infrared spectrometry (TGA‐FTIR), pyrolysis‐gas chromatography/mass spectrometry (Py‐GC/MS), morphology, and chemical component analysis of the char residues. The results demonstrated that EP/BPD thermosets not only exhibited outstanding flame retardancy but also kept high glass transition temperature. EP/BPD‐1.0 thermoset achieved LOI value of 39.1% and UL94 V‐0 rating. In comparison to pure epoxy thermoset, the average of heat release rate (av‐HRR), total heat release (THR), and total smoke release (TSR) of EP/BPD‐1.0 thermoset were decreased by 35.8%, 36.5% and 16.5%, respectively. Although the phosphorus content of EP/BPD‐0.75 thermoset was lower than that of EP/DOPO thermoset, EP/BPD‐0.75 thermoset exhibited better flame retardancy than EP/DOPO thermoset. The significant improvement of flame retardancy of EP/BPD thermosets was ascribed to the blocking effect of phosphorus‐rich intumescent char in condensed phase, and the quenching and diluting effects of abundant phosphorus‐containing free radicals and nitrogen/sulfur‐containing inert gases in gaseous phase. There was flame‐retardant synergism between phosphorus, nitrogen, and sulfur of BPD.     

微纳米钙钛矿型羟基锡酸钙的合成及对环氧树脂的阻燃性能

钙钛矿型羟基锡酸盐是近年来出现的新型高效阻燃消烟剂. 本文采用化学共沉淀法合成了微纳米钙钛矿型羟基锡酸钙[CaSn(OH)₆, CSH], 并利用扫描电子显微镜、 透射电子显微镜、 X射线衍射仪、 红外光谱仪和X射线光电子能谱仪等对其形貌和结构进行表征. 结果表明合成的CaSn(OH)₆为平均粒径500 nm的纯净正六面体, 粒径均一且分散性良好. 将CaSn(OH)₆应用于环氧树脂(EP)复合阻燃体系(CSH/EP), 并分别采用热重分析、 极限氧指数和锥形量热测试表征了其热降解行为和燃烧性能. 采用扫描电子显微镜、 红外光谱、 X射线衍射和拉曼光谱对EP复合材料的阻燃成炭机制进行探索. 结果表明, CaSn(OH)₆能显著提高EP复合材料的高温稳定性、 热释放速率、 热释放量、 烟释放量和极限氧指数数值. 特别是在很低添加量(0.5%, 质量分数)下, 阻燃消烟性能即得到极大提升, 热释放速率、 总放热量和一氧化碳释放量分别降低45.8%, 25.1%和31.3%. 此外, 由于CaSn(OH)₆在EP基体中的良好分散及较强的界面作用, CaSn(OH)₆在提升EP复合材料阻燃消烟性的同时还提升了EP复合材料的力学强度. 本文合成的CaSn(OH)₆可作为一种多功能的高效阻燃、 消烟和增强剂.     

Low flammability and smoke epoxy resins with a novel DOPO‐based imidazolone derivative

In this work, a DOPO‐based imidazolone derivative named DHI was synthesized using DOPO, 5‐amino‐2‐benzimidazolinone and 4‐hydroxybenzaldehyde as raw materials. The chemical structure of DHI was characterized by ¹H‐NMR, ³¹P‐NMR and Fourier transform infrared spectra (FTIR). Then, a series of different flame‐retardant epoxy resin (EP) thermosets were prepared by mixing flame retardant DHI. The thermal properties of the cured EPs was investigated by thermogravimetry analysis (TGA) and differential scanning calorimeter (DSC), and the results showed the thermal stability and glass transition temperature (T_g) of the cured EP modified with DHI declined slightly compared with that of neat EP. The limited oxygen index (LOI) and UL94 test results exhibited DHI imparted good flame retardancy to EP. The EP‐4 (phosphorus content of 1.25%) possessed a LOI value of 36.5% and achieved a V‐0 rating. Furthermore, the peak of heat release rate (PHRR) and total heat release rate (THR) of EP‐4 decreased by 38.7% and 24.5%, respectively. Excitedly, the total smoke production (TSP) of EP‐4 sample declined by 62.5%, which meant DHI also made EP obtain excellent smoke suppression property. Moreover, the flame‐retardant mechanism was studied by scanning electron microscopy (SEM) and pyrolysis‐gas chromatography/mass spectrometry (Py‐GC/MS). It was reasonable inferred that DHI could not only promote EP to form dense char layer in condensed phase, but also restrain combustion in gaseous phase through catching the free radicals sourced from the degradation of EP.     

A novel nitrogen,phosphorus, and boron ionic pair compound toward fire safety and mechanical enhancement effect for epoxy resin

In this work, a novel nitrogen, phosphorus and boron ionic pair compound (DTPA[AZB]), composed of a protonated flame retardant (DTPA) 6,6'‐(1,4‐phenylenebis((pyrazin‐2‐ylamino)methylene))bis(dibenzo[c,e][1,2]oxaphosphinine 6‐oxide) and a counter anion alizarin borate (AZB), has been prepared and fully characterized, AZB was synthesized by the reaction of alizarin with boric acid. DTPA was produced in two steps. First, terephthalaldehyde was condensed with aminopyrazine to form the corresponding imine. This was treated with 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) to generate DTPA. Blending with DTPA greatly reduced the flammability of epoxy resin. When the amount of DTPA added was 4%, a modified epoxy resin passed the V‐0 rating and the limiting oxygen index (LOI) reached 32.5%. With the introduction of 3% AZB into the EP/DTPA material, the LOI reached 33.5%. Simultaneously, compared with that of neat EP, the peak heat release rate and smoke production rate for EP/DTPA‐4 was decreased by 24.1% and 40.7%, respectively, and the peak heat release rate and smoke production rate for EP/DTPA[AZB]‐3 was decreased by 32.9% and 43.4%, respectively. The results indicate that AZB and DTPA show good cooperative flame retardant effects. The flame retardancy of the modified epoxy is improved with greater heat release suppression combustion of the resin. A mode of flame retardant action has been proposed based on analysis results from Py‐GC/MS for DTPA, and SEM, IR and Raman for the residual carbon from cone calorimeter and UL‐94 tests, respectively. Importantly, the tensile strength, fexural strength, and fexural modulus of the EP/DTPA[AZB] increased compared with the same properties of neat EP.     

Thermal and flame retardant properties of epoxy resin cured by a novel phosphorus-containing 4,4′-bisphenol novolac curing agent

A novel flame retardant curing agent for epoxy resin (EP), i.e., a DOPO (9,10-dihydro-9-oxa-10-phosphaphenan-threne-10-oxide)-containing 4,4'-bisphenol novolac (BIP-DOPO) was synthesized and characterized by Fourier transform infrared (FTIR), ¹H NMR, ³¹P NMR spectroscopy, and gel permeation chromatography. The epoxy resin cured by BIP-DOPO itself or its mixture with a commonly used bisphenol A-formaldehyde novolac resin (NPEH720) was prepared. The flame retardancy of the cured EP thermosets were studied by limiting oxygen index (LOI), UL 94 and cone calorimeter test (CCT), and the thermal properties by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results show that the cured epoxy resin EPNP/BI/3/1, which contains 2.2% phosphorus, possesses a value of 26.2% and achieves the UL 94 V-0 rating. The data from cone calorimeter test demonstrated that the peak release rate, average heat release rate, total heat release decline sharply for the flame retarded epoxy resins, compared with those of pure ones. DSC results show that the glass-transition temperatures of cured epoxy resins decrease with increasing phosphorus content. TGA indicates that the incorporation of BIP-DOPO promotes the decomposition of epoxy resin matrix ahead of time and leads to higher char yield. The surface morphological structures of the char residues reveal that the introduction of BIP-DOPO benefits to the formation of a continuous and solid char layer on the epoxy resin material surface during combustion.     

Synthesis and application of a dual functional P/N/S‐containing microsphere with enhanced flame retardancy and mechanical strength on EP resin

A phosphazene derivative flame retardant with a highly cross‐linked microsphere structure, named poly(cyclotriphosphazene‐c‐sulfonyldiphenol) (PCPS) microspheres, were synthesized by 1‐pot reaction and then applied on flame retarded epoxy (EP) resin. The microstructure and chemical composition of PCPS microspheres were characterized using scanning electron microscopy, transmission electron microscopy, and element mapping. The thermal stability of PCPS microspheres and PCPS/EP composites was explored through thermogravimetric analysis. Thermogravimetric data showed that the PCPS microspheres have excellent thermal stability, and the char yield is about 43% at the end of 800°C. The incorporation of PCPS microspheres significantly increased the char yield of PCPS/EP composites. The flammability was investigated by limited oxygen index tests and cone calorimeter. The limited oxygen index value of PCPS/EP composite was increased to 29.8 from 26.6 when 3 wt% of PCPS microspheres was added. Compared with neat EP, the flame retardancy was greatly improved. The peak heat release rate and smoke production rate of PCPS/EP composites were reduced by 45.0% and 43.6%, respectively. The mechanical properties including tensile strength and modulus were both improved due to the enhancement of PCPS microspheres. The PCPS microspheres act as a dual function for improving both the flame resistance and mechanical strength of PCPS/EP system.     

Preparation of (Fe)MIL-101 on short carbon fibers to improve the flame retardancy,smoke suppression,and mechanical of epoxy resin

Nano (Fe)MIL-101 particles were grafted on the short carbon fibers (SCFs) by in situ growth method to prepare (Fe)MIL-101@SCFs. The flame-retarded composites of epoxy resin (EP) were fabricated with combination of (Fe)MIL-101@SCFs and ammonium polyphosphate (APP). The composites showed good flame retardancy, smoke suppression, and mechanical properties simultaneously. The main heat release rate peak of the flame-retarded composites was reduced and delayed evidently in comparison with pristine EP. The high amount of residual char with coherent and dense structure was formed owing to the catalytic char formation of (Fe)MIL-101 as well as the strengthening action of SCF. The improvement in mechanical properties of the flame-retarded composite was due to the reinforcement effects of (Fe)MIL-101@SCFs and its action of interfacial adjustment. This research solved the contradiction between the flame retardancy and mechanical properties of EP, and proposed a new method to prepare the mechanically reinforced and flame retardant EP.     

Zeolitic imidazolate frameworks‐8 modified graphene as a green flame retardant for reducing the fire risk of epoxy resin

A novel hybrid material of ZIF‐8/RGO (zeolitic imidazolate frameworks‐8 loaded the surface of graphene) was synthesised by a simple method and characterized. Then, ZIF‐8/RGO was added into epoxy resin (EP), and the flame retardancy and smoke suppression of the EP composites were studied. Compared with pure EP, the peak heat release rate and the total heat release of the EP composites were reduced remarkably, and their LOI and UL94 vertical burning rating were also improved. In addition, their smoke production rate and total smoke production were decreased drastically. The improved flame retardancy and smoke suppression were mainly attributed to the physical barrier effect of graphene. Meanwhile, the metal oxide decomposed from ZIF‐8 could contribute to the production of char residue and enhance the compactness of the char layer.     

Flame retardant epoxy composites with epoxy‐containing polyhedral oligomeric silsesquioxanes

A kind of polyhedral oligomeric silsesquioxanes (POSS) containing the propoxyl‐epoxy and phenyl groups (pr‐ep‐Ph‐POSS) was synthesized via hydrolytic condensation reaction. Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry identified the structure of the pr‐ep‐Ph‐POSS, including major caged Si₆O₉ (T6), Si₁₀O₁₅ (T10), Si₁₂O₁₈ (T12), etc. The pr‐ep‐Ph‐POSS was applied into the epoxy resin to achieve EP/pr‐ep‐Ph‐POSS composites. Thermogravimetric analysis indicated that EP/pr‐ep‐Ph‐POSS showed excellent thermal properties than pure EP. The fire behaviors of EP/pr‐ep‐Ph‐POSS composites were evaluated based on the cone calorimetry, limiting oxygen index (LOI), UL‐94 vertical burning test, and smoke density test. The smoke density decreased by ~30%, the LOI value reached to 26.4%, dripping was inhibited, and the peak of heat release rate decreased by ~62%. X‐ray photoelectron spectroscopy analysis and FTIR indicated that protective‐barrier effect is the main flame‐retardant mode of action for pr‐ep‐Ph‐POSS, due to the formation of the Si‐O‐Si, Si‐O‐C, and Si‐C condensed phase, which improve the thermal stability, strength, and integrity of the char layer.     

Preparation of Poly(phosphoric acid piperazine) and Its Application as an Effective Flame Retardant for Epoxy Resin

A phosphorus-nitrogen containing flame retardant additive of poly(phosphoric acid piperazine),defined as PPAP,was synthesized by the salt-forming reaction between anhydrous piperazine and phosphoric acid,and the dehydration polymerization under heating in nitrogen atmosphere.Its chemical structure was well characterized by Fourier transform infrared (FTIR) spectroscopy,13C and 31p solid-state nuclear magnetic resonance measurements.The synthesized PPAP and curing agent m-phenylenediamine were blended into epoxy resin (EP) to prepare flame retardant EP thermosets.The effects of PPAP on the fire retardancy and thermal degradation behavior of cured EP/PPAP composites were investigated by limiting oxygen index (LOI),vertical burning (UL-94),thermogravimetric analysis/infrared spectrometry (TG-IR) and cone calorimeter tests.The morphologies and chemical compositions of char residues for cured epoxy resin were investigated by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS),respectively.The results demonstrated that the flame retardant EP thermosets successfully passed UL-94 V-0 flammability rating and the LOI value was as high as 30.8％ when incorporating 5wt％ PPAP into the EP thermosets.The TGA results indicated that the synthesized PPAP flame retardant additive possessed high thermal stability and excellent charring capability.Meanwhile,the incorporation of PPAP stimulated the epoxy resin matrix to decompose and charring ahead of time due to its catalytic decomposition effect,which led to a higher char yield at high temperature.The morphological structures and the analysis results of XPS for char residues of EP thermosets revealed that the introduction of PPAP benefited the formation of a sufficient,more compact and homogeneous char layer containing phosphorus-nitrogen flame retardant elements on the material surface during combustion.The formed char layer with high quality effectively prevented the heat transmission and diffusion,limited the production of combustible gases,and inhibited the emission of smoke,leading to the reduction of heat and smoke release.     

Mechanical and flame‐retardant properties and thermal decomposition of vinyl ester resin modified by different phenyl silsesquioxanes

The mechanical properties and fire resistance of vinyl ester resin (VER) composites containing cage‐shaped octaphenyl silsesquioxane (OPS), incompletely cage‐shaped phenyl silsesquioxane (PhT₇POSS), and ladder‐shaped phenyl silsesquioxane (PPSQ) were investigated. The POSS structure and dispersion have a great influence on the mechanical properties, thermal stability, and decomposition process of VER composites. The bending strength at break and modulus of the VER‐POSS composites were enhanced obviously, especially for VER‐PPSQ composite and VER‐OPS composite, respectively. In addition, PhT₇POSS‐based VER composites revealed the lower values of the peak heat release rate, total heat release, and total smoke release in cone calorimetry tests due to the formation of dense carbon/silica protective layers that acted as a barrier to heat and mass transfer. Moreover, the flame‐retardant mechanisms of condensed phase and gas phase were also investigated in detail. These results illustrate VERs modified by OPS, PhT₇POSS, and PPSQ are providing an applicable method to fabricate the composites with excellent flame‐retardant and mechanical properties.     

A novel graphene hybrid for reducing fire hazard of epoxy resin

Epoxy resin (EP) is more and more important in many fields, but its application is limited due to the inflammability in air of EP. Therefore, reducing the fire hazard of EP is necessary. In this work, a kind of hybrid flame retardant (α‐ZrP‐RGO) consisting of a 2‐dimensional inorganic reduced graphene oxide (RGO) modified with a planar‐like α‐zirconium phosphate (α‐ZrP) particles was prepared successfully via 1‐step hydrothermal method. The effects of α‐ZrP‐RGO on the thermal performance, flame retardancy, and smoke suppression of EP were investigated by preparing EP composites containing both EP and α‐ZrP‐RGO. Thermogravimetric results revealed that α‐ZrP‐RGO could improve the char yield of EP at 700°C obviously. In addition, compared with pure EP, the peak heat release rate and the total heat release of EP composites were decreased significantly, while the limited oxygen index of EP composites was increased. Meanwhile, the smoke production rate of EP composites was reduced obviously with the addition of α‐ZrP‐RGO. The enhanced flame retardancy and smoke suppression of EP composites were mainly attributed to not only the physical barrier effect of both α‐ZrP and RGO but also the catalytic effect of α‐ZrP during the combustion process of EP composites.     

磷杂菲类阻燃剂的合成及其与聚磷酸铵复合膨胀体系对环氧树脂的阻燃性能研究

以9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)、五硫化二磷(P2S5)为原料合成9,10-二氢-9-氧杂-10-磷杂菲-10-硫化物(DOPS),并将DOPS与聚磷酸铵(APP)组成复合阻燃剂,用于环氧树脂(EP)的阻燃改性.通过氧指数(LOI)、垂直燃烧(UL-94)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法对改性后的环氧树脂的阻燃性能和阻燃机理进行了测试和分析.实验结果表明,DOPS/APP阻燃体系对EP具有很好的阻燃性能,且复配阻燃剂的阻燃效果比单一的阻燃剂阻燃效果好;其中,当阻燃剂的总添加量达到30%时即W_(DOPS)=10%、W_(APP)=20%时,阻燃EP复合材料的LOI值可达到29.2%,垂直燃烧等级达到UL-94 V-0级,残炭量可达49.3%.     

双层包裹聚磷酸铵微胶囊合成及其在环氧树脂中阻燃研究

采用原位聚合法制备了蜜胺树脂(MF)和环氧树脂(EP)双层包裹聚磷酸铵(APP),得到一种新型核壳结构的微胶囊阻燃剂(EMFAPP).用傅里叶红外光谱(FTIR)和扫描电镜(SEM)对微胶囊的核壳结构进行了表征;用极限氧指数(LOI)、垂直燃烧等级测试(UL 94)对EMFAPP在EP中的阻燃性能进行了研究.EMFAPP在EP基体中阻燃性能优异,当其添加量大于7%时EP/EMFAPP均通过UL 94 V-0级,LOI值达27.0%以上.与未包裹APP相比,EMFAPP耐水性明显提高;经水处理(75℃,6天)后,EMFAPP/EP仍可保持良好的阻燃性能.采用热重分析对EMFAPP及其阻燃复合物的热降解行为进行了研究,EMFAPP能够促进成炭,EP/EMFAPP(8 wt%)在700℃残炭率达16.2%,但其低温稳定性有所下降.此外,利用热失重-红外联用对EMFAPP/EP的热降解行为进行了研究,探讨相关阻燃机理.     

碳纳米管改性环氧树脂的导热和阻燃性能

以双酚A二缩水甘油醚(DGEBA)环氧树脂(Epoxy Resin,EP)为基体、甲基六氢苯酐(MHHPA)为固化剂、以多壁碳纳米管(MWCNTs)为添加剂制备了环氧树脂/碳纳米管纳米复合材料。通过对微观结构、玻璃化转变温度(Tg)、热失重、热导率和锥形量热测试结果分析,研究了质量分数少于1.5%的MWCNTs对环氧树脂的导热和阻燃性能影响,结果表明,MWCNTs质量分数为1.5%时,复合材料发生团聚;纳米复合材料随着MWCNTs质量分数的增加Tg值先增加后降低;失重5%时,对应的温度先增加后降低,残炭量增加;样品的热导率呈现先升高后降低的趋势,当MWCNTs质量分数为1%时,复合材料的热导率最大;MWCNTs加入后环氧树脂的总释热量减少,释烟量增加,阻燃性得到一定程度的提高。     

Synthesis of bio‐based poly (cyclotriphosphazene‐resveratrol) microspheres acting as both flame retardant and reinforcing agent to epoxy resin

A highly cross‐linked poly (cyclotriphosphazene‐resveratrol) microsphere (PRV) was synthesized by using hexachlorocyclotriphosphazene (HCCP) and bio‐based resveratrol (REV) as raw materials, and the obtained PRV microspheres were applied to improve the flame retardancy and mechanical property of epoxy resin (EP). The TGA results showed that the PRV microsphere is an excellent charring agent and the char yield is as high as 62% at 800°C. The incorporation of PRV makes the initial degradation earlier yet significantly increases the char residue of EP composites. Moreover, the introduction of PRV microspheres into EP greatly promoted the flame retardancy performance. Under 3% of addition of PRV microspheres, the peak heat release rate (PHRR) and total heat release (THR) were decreased by 58.3% and 29.6%, respectively, the limited oxygen index (LOI) value was increased to 29.7% from 25.3% of pure EP. In addition, because of the uniform distribution in EP matrix and the enhancing effect of PRV microspheres, the mechanical properties including tensile modulus of EP composites were strengthened. PRV microspheres in this paper provide a possibility to synthesize a dual functional filler, which acts as both flame retardant and strengthening agent.     

A vanillin-derived flame retardant based on 2-aminopyrimidine for enhanced flame retardancy and mechanical properties of epoxy resin

In order to give epoxy resin good flame retardance, a novel bio-based flame retardant based on 2-aminopyrimidine (referred to as VAD) was synthesized from renewable vanillin as one of the starting materials. Its structure was confirmed by NMR and mass spectra. The epoxy resins containing VAD were prepared by utilizing 4,4-diaminodiphenylmethane (DDM) as a co-curing agent, and their flame-retardant, mechanical and thermal properties and corresponding mechanisms were studied. VAD accelerated the cross-linking reaction of DDM and E51 (diglycidyl ether of bisphenol A). 12.5 wt% VAD made the epoxy resin achieve UL-94 V-0 rating and its limited oxygen index (LOI) value increase from 22.4% to 32.3%. The cone calorimetric testing results revealed the decline in the values of total heat release (THR) and peak of heat release rate (pk-HRR) and the obvious enhancement of residue yield. A certain amount of VAD enhanced the flame inhibition, charring and barrier effects, resulting in good flame retardance of the epoxy resin. Furthermore, the tensile strength, flexural strength and flexural modulus of the epoxy resin with 12.5 wt% loading of VAD were 6.5%, 14.9%, 15.2% higher than those of EP, indicating the strengthening effect of VAD. This work guarantees VAD to be a promising flame retardant for enhancing the fire retardancy of epoxy resin without compromising its mechanical properties.     

Synthesis of DOPO‐based pyrazine derivative and its effect on flame retardancy and thermal stability of epoxy resin

A novel DOPO‐based pyrazine derivative 6‐((2‐hydroxyphenyl)(pyrazin‐2‐ylamino)methyl)dibenzo[c,e][1,2]oxaphosphinine 6‐oxide (DHBAP) was triumphantly synthesized by a two‐step addition reaction using 2‐aminopyrazine, 2‐hydroxybenzaldehyde and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) as reactants, and characterized by Fourier‐transform infrared (FTIR), ³¹P nuclear magnetic resonance (NMR) and ¹H NMR. Afterwards, the addition type flame retardant (DHBAP) was utilized to modify epoxy resin (EP) by blending method. When the content of DHBAP in neat EP was 8 wt%, it reached to the V‐0 rating and the limited oxygen index (LOI) value up to 34.0%. Furthermore, according to the cone calorimeter (CC) test results, the heat release rate (HRR), total heat release (THR), smoke produce rate (SPR) and total smoke production (TSP) of EP/8% DHBAP decreased by 26.3%, 21.3%, 37.0% and 60.9% when compared with neat EP, respectively, indicating that DHBAP had good inhibition on heat and smoke releases. Eventually, the flame‐retardant mechanism of DHBAP was further explored by X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, and pyrolysis‐gas chromatography/mass spectrometry (Py‐GC/MS). The results showed that DHBAP had good flame‐retardant activity in the gasous‐condensed two phases.     

Fabrication of ZIF‐8@Polyphosphazene core‐shell structure and its efficient synergism with ammonium polyphosphate in flame‐retarding epoxy resin

A novel zeolitic imidazolate framework (ZIF‐8) nanoparticles@polyphosphazene (PZN) core‐shell architecture was synthesized, and then, ZIF‐8@PZN and ammonium polyphosphate (APP) were applied for increasing the flame retardancy and mechanical property of epoxy resin (EP) through a cooperative effect. Herein, ZIF‐8 was used as the core; the shell of PZN was coated to ZIF‐8 nanoparticles via a polycondensation method. The well‐designed ZIF‐8@PZN displayed superior fire retardancy and smoke suppression effect. The synthesized ZIF‐8@PZN observably raised the flame retardancy of EP composites, which could be demonstrated by thermogravimetric analysis (TGA) and a cone calorimeter test (CCT). The chemical structure of ZIF‐8@PZN was characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Compared with pure epoxy, with the incorporation of 3 wt% ZIF‐8@PZN and 18 wt% APP into the EP, along with 80.8%, 72.6%, and 64.7% decreased in the peak heat release rate (pHRR), the peak smoke production rate (pSPR), and the peak CO production rate (pCOPR), respectively. These suggested that ZIF‐8@PZN and APP generated an intumescent char layer, and ZIF‐8@PZN can strengthen the char layer, resulting in the enhancement in the flame resistance of EP.     

Flame retardant and toughening behaviors of bio‐based DOPO‐containing curing agent in epoxy thermoset

Based on bio‐based furfural, a phosphorus‐containing curing agent (FPD) was successfully synthesized, via the addition reaction between 9,10‐dihydro‐9‐oxa‐10 phosphaphenanthrene‐10‐oxide (DOPO) and furfural‐derived Schiff base. Then, as co‐curing agent, FPD was used to prepare flame retardant epoxy thermosets (EP) cured by 4, 4′‐diaminodiphenyl methane. The incorporated FPD improved the flame retardancy and toughness of epoxy thermoset, simultaneously. When 5 wt% FPD was added into EP, the FPD/EP achieved 35.7% limited oxygen index (LOI) value and passed UL94 V‐0 rating, meanwhile. In FPD/EP thermoset, the incorporated FPD reduced the thermal decomposition rate, increased the charring capacity, and inhibited the combustion intensity of epoxy thermoset. Through gas‐phase and condensed‐phase actions in weakening fuel supply, suppressing volatile combustion, and enhancing charring barrier effect, FPD decreased the heat release of burning epoxy thermoset, significantly. For the outstanding effectiveness on both flame retardancy and toughness, the study on FPD provides a promising way to manufacture high‐performance epoxy thermoset.