Ultrasound-aided rapid and enhanced adsorption of anionic dyes from binary dye matrix onto novel hematite/polyaniline nanocomposite: Response surface methodology optimization

In recent times, polyaniline (PANI), a conducting polymer, has been studied widely for environmental remediation application due to its controllable electric conductivity with high surface area, which makes it a suitable adsorbent material. But lower mechanical stability of PANI is considered to be a serious drawback for its large-scale industrial application. To improve the mechanical strength of PANI, in this study, hematite nanoparticles were impregnated onto PANI by oxidative polymerization method in order to fabricate a novel organometallic nanocomposite (hematite-PANI-NC). The hematite-PANI-NC was used as adsorbent for removal of methyl orange (MO) and eosin yellow (EY) dye from binary dye matrix under ultrasonic-assisted adsorption. Excellent MO and EY dye removal (more than 98%) was observed from binary matrix at a wide solution pH from 2.0 to 6.0, and under ultrasound wave the adsorption equilibrium was achieved within 15 min only. Both MO and EY dyes adsorption experimental data strictly followed Langmuir isotherm, and maximum monolayer adsorption capacity of 126.58 mg/g and 112.36 mg/g was observed for MO and EY dye, respectively. The uptake mechanism of MO and EY dyes onto hematite-PANI-NC is governed by electrostatic interaction, π-π bonding and hydrogen bonding between dye molecules and nanocomposite. Response surface methodology analysis reveals maximum MO and EY removal of 98.43% and 99.35% at optimum experimental conditions. This study implies that the hybrid organometallic material hematite-PANI-NC has high potential for quick and enhanced sono-assisted uptake of anionic dyes from water near neutral solution pH.     

Detection of acetaminophen using cyclic voltammetry on MnFe2O4/polyaniline

A novel sensing material, MnFe₂O₄/polyaniline (PANI), was fabricated by doping PANI to MnFe₂O₄ on a modified glassy carbon electrode (GCE). This sensing material was characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), and high‐resolution transmission electron microscopy (HR‐TEM). Using a cyclic voltammetry electrochemical‐sensing method, we tested MnFe₂O₄/PANI, and an acetaminophen concentration of 0.0625–5 mM was recorded. Furthermore, the sensor responses were 2.05–22.44. The detection limit was 2.23 × 10^?7 M. Strong selectivity was observed for MnFe₂O₄/PANI, which is a possible sensing mechanism.     

Poly(butyl methacrylate)-grafted alginate/Fe3O4 nanocomposite: Synthesis and its application for removal of dyes

This study involved the utilization of a free radical-graft copolymerization reaction for the development of a novel adsorbent, namely, poly(butyl methacrylate)-grafted alginate/Fe₃O₄ nanocomposite (PBMA-gft-Alg/Fe₃O₄). Transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray analysis, X-ray diffraction patterns analysis, and Fourier transform infrared spectroscopy (FT-IR) were carried out for the characterization of Fe₃O₄ NPs and PBMA-gft-Alg/Fe₃O₄ nanocomposites. The capability of nanocomposites and nanoparticles to adsorb dyes such as MG and MB, resulting in their removal from aqueous media, was evaluated under different conditions such as pH, temperature, contact time, and dose of adsorbent. Optimum parameters for adsorption of dyes were found to be pH of 10, 50°C, contact time of 180 min, and 0.2 g of adsorbent. Efficiency of the PBMA-gft-Alg/Fe₃O₄ nanocomposite was found to be significantly greater than that of Fe₃O₄ NPs for eliminating the desired dye. Langmuir, Freundlich, Sips, and Temkin models were used for testing the experimental data. Freundlich model was the one that best described the adsorption.     

Mixed phase Fe2O3/Mn3O4 magnetic nanocomposite for enhanced adsorption of methyl orange dye: Neural network modeling and response surface methodology optimization

In this research, a novel magnetic mesoporous adsorbent with mixed phase of Fe₂O₃/Mn₃O₄ nanocomposite was prepared by a facile precipitating method and characterized extensively. The prepared nanocomposite was used as adsorbent for toxic methyl orange (MO) dye removal from aqua matrix considering its high surface area (178.27 m²/g) with high saturation magnetization (23.07 emu/g). Maximum dye adsorption occurs at solution pH 2.0 and the electrostatic attraction between anionic form of MO dye molecules and the positively charged nanocomposite surface is the main driving force behind this adsorption. Response surface methodology (RSM) was used for optimizing the process variables and maximum MO removal of 97.67% is obtained at optimum experimental condition with contact time, adsorbent dose and initial MO dye concentration of 45 min, 0.87 g/l and 116 mg/l, respectively. Artificial neural network (ANN) model with optimum topology of 3–5–1 was developed for predicting the MO removal (%), which has shown higher predictive ability than RSM model. Maximum adsorption capacity of this nanocomposite was found to be 322.58 mg/g from Langmuir isotherm model. Kinetic studies reveal the applicability of second‐order kinetic model with contribution of intra‐particle diffusion in this process.     

聚苯胺/聚丙烯酰胺/镍锌铜铁氧体复合物的制备及电磁性能

采用溶液聚合法制备了聚苯胺/聚丙烯酰胺/镍锌铜铁氧体(PANI/PAM/Zn0.4Ni0.5Cu0.1Fe2O4)三元复合物. 利用X射线衍射仪、红外光谱仪、扫描电子显微镜和振动样品磁强计分别表征了样品的结构、形貌和磁性能, 用阻抗/材料分析仪测定了复合物在1 MHz～1 GHz的频率范围内的磁损耗和介电损耗, 并研究了聚苯胺和引发剂的相对含量对复合物的磁损耗和介电损耗的影响. 结果表明复合物中磁性粒子和聚合物之间具有一定的相互作用, 复合物在1 MHz～1 GHz的频率范围内具有较大电磁损耗能力.     

On the Adsorption of Some Catechol Derivatives from Aqueous Solutions onto Activated Carbon Cloth: Equilibrium and Kinetic Studies

The removal of some of pollutants including catechol, 3-methylcatechol, 3-methoxycatechol, and 2,3-dihydroxybenzoic acid by adsorption onto activated carbon cloth (ACC) at 35.0 ± 0.1°C was investigated. The equilibrium experimental data were fitted to Langmuir, Freundlich, Temkin, Langmuir-Freundlich, and Redlich-Peterson isotherms. Also the kinetic experimental data were fitted to the pseudo-first-order and pseudo-second-order kinetic models. It was found that the pseudo-second-order model describes the kinetic of adsorption better than the other one. By comparing the obtained results with the previously reported data, it can be concluded that ACC is a high efficient adsorbent for removal of phenolic compounds from aqueous solutions.     

Crystallization of MgFe2O4 from a glass in the system K2O/B2O3/MgO/P2O5/Fe2O3

Spherical magnetic Mg-Fe-O nanoparticles were successfully prepared by the crystallization of glass in the system K₂O/B₂O₃/MgO/P₂O₅/Fe₂O₃. The magnetic glass ceramics were prepared by melting the raw materials using the conventional melt quenching technique followed by a thermal treatment at temperatures in the range 560–700 °C for a time ranging from 2 to 8 h. The studies of the X-ray diffraction, electron microscopy and FTIR spectra confirmed the precipitation of finely dispersed spherical (Mg, Fe) based spinel nanoparticles with a minor quantity of hematite (α-Fe₂O₃) in the glass matrix. The average size of the magnetic nano crystals increases slightly with temperature and time from 9 to 15 nm as determined by the line broadening from the XRD patterns. XRD studies show that annealing the glass samples for long periods of time at temperature ≥604 °C results in an increase of the precipitated hematite concentration, dissolution of the spinel phase and the formation of magnesium di-borate phase (Mg₂B₂O₅). For electron microscopy, the particles were extracted by two methods; (i) replica extraction technique and (ii) dissolution of the glass matrix by diluted acetic acid. An agglomeration of the nano crystals to larger particles (25–35 nm) was observed.     

Efficient catalytic degradation of single and binary azo dyes by a novel triple nanocomposite of Mn3O4/Ag/SiO2

The strategy of structurally integrating noble metal and metal oxides is expected to offer exceptional opportunities toward emerging functions of all. We report the creation of an efficient hetero-structured nanocatalyst consisting of Mn₃O₄ core, SiO₂ shell impregnated with noble Ag nanoparticles. The triple nanocatalyst Mn₃O₄/Ag/SiO₂ was synthesized by using a facile three-step approach to disperse Ag nanoparticles between the surfaces of functionalized Mn₃O₄ and SiO₂. The physicochemical structural characterization was performed by XRD and FTIR. The surface morphologies were observed by SEM and TEM. The EDX measurements confirmed the composition of the composite. The nanocomposite has been used as a catalyst for the degradation of Direct blue 78 in the presence of sodium borohydride (NaBH₄). It has a drastic catalytic effect as compared to Mn₃O₄/Ag and Mn₃O₄. The rate constant of Direct blue 78 reduction followed the order: Mn₃O₄/Ag/SiO₂ (0.25166 min⁻¹) > Mn₃O₄/Ag (0.07971 min⁻¹) > Mn₃O₄ (0.00947 min⁻¹). The effects of different reaction conditions of the catalytic reaction have been determined. The catalytic activity of the as- synthesized nanocomposite was examined for the binary dyes system by incorporation of an additional dye (Sunset yellow). Its influence on the degradation rate and efficiency of Direct blue 78 was investigated. The nanocatalyst exhibited excellent catalytic activity towards the complete degradation of both the Direct blue 78 and Sunset yellow. The degradation percentage for these dyes reached 99.33 and 94.68%, respectively. The recovery and reusability of the Mn₃O₄/Ag/SiO₂ nanocomposite was studied in the reduction reaction of Direct blue 78. Five consecutive recovery reaction cycles were performed. They revealed high stability and constant efficiency of the catalyst for four cycles.     

Synthesis of a MnO2/multiwalled carbon nanotube nanocomposite and its application as a sorbent for removing Cu2+ ions from aqueous media

In this research, a manganese dioxide/multiwalled carbon nanotube (MnO₂/MWCNT) was firstly synthesized and characterized and then was applied as an effective sorbent for removing Cu²⁺ ions from aqueous solution. The effects of initial concentration, temperature, contact time, pH solution, and sorbent dosage were investigated and the optimum value of each was determined. The Langmuir isotherm model, Freundlich model, and Temkin model were used to fit our experimental results. Ultimately, using the Van't Hoff approach, the thermodynamic functions of the intended adsorption phenomenon such as ΔH°_ad, ΔS°_ad, and ΔG°_ad were estimated.     

Preparation and ferromagnetic properties of Ni0.5Zn0.5Fe2O4/polyaniline core–shell nanocomposites

Magnetic Ni_0.5Zn_0.5Fe₂O₄‐crosslinked polyaniline composites with a core–shell structure were prepared in the presence of Ni_0.5Zn_0.5Fe₂O₄ magnetic powder in a toluene solution containing iron chloride as a surfactant and dopant. Structural characterization by Fourier transform infrared, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy proved that Ni_0.5Zn_0.5Fe₂O₄ in the composites was responsible for the ferromagnetic behavior of the composites. The effects of the polyaniline and temperature on the magnetic properties of the Ni_0.5Zn_0.5Fe₂O₄/polyaniline composites were studied with electron paramagnetic resonance and superconducting quantum interference device techniques. A clear evolution from ferromagnetic resonance to electron paramagnetic resonance was observed as a function of temperature, which was related to the passage through the Curie point (～420 K). The magnetic properties of the resulting composites showed ferromagnetic behavior, such as high‐saturated magnetization (saturation magnetization = 35–39 emu/g), low coercive force (coercivity = 22–28 G), and low blocking temperatures (～23 K). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2657–2664, 2006     

Facile and eco-benign synthesis of a novel MnFe2O4@SiO2@Au magnetic nanocomposite with antibacterial properties and enhanced photocatalytic activity under UV and visible-light irradiations

The purpose of this research is to prepare novel, inexpensive, eco-friendly and efficient magnetic nanocomposites for degradation of pollutant from wastewater and their potential antibacterial activity. To reach this goal, we have synthesized magnetic MnFe₂O₄@SiO₂@Au (MnFe@Si@Au) nanocomposites through ultrasound assisted co-precipitation technique in presence of carbohydrate and Crataegus fruits extract, for the first time. The influence of capping agents including sucrose, glucose, PVA and reducing agents such as C. microphylla and C. pentagyna on the morphology, size, purity, photocatalytic and antibacterial behavior of magnetic nanocomposites were investigated. The FT-IR, XRD, VSM, EDS, FE-SEM, TEM and BET analysis were performed to confirm the formation of magnetic nanocomposites. MnFe@Si@Au nanocomposites have shown promising potential in degradation of organic contaminants including rhodamine b (RhB), 2-naphthol (2-NPH), methyl violet (MV), erythrosine (ER) and eriochrome black T (EBT) under both radiation conditions. The results show that degradation of the anionic contaminants is more than cationic contaminants under UV and visible irradiations. As well as, these synthesized spherical MnFe@Si@Au nanocomposites show excellent antibacterial activities against P. aeruginosa, K. pneumoniae and P. mirabilis bacteria. In addition to the features mentioned, another prominent feature of this nanocatalyst is retaining their photocatalytic activity after five cycles of utilization.     

Adsorption of light green and brilliant yellow anionic dyes using amino functionalized magnetic silica (Fe3O4@SiO2@NH2) nanocomposite

Abstract

Fe₃O₄@SiO₂@NH₂ nanocomposite was prepared for highly effective adsorption of two anionic dyes one of which is triarylmethane dye (light green, LG) and the other is azo dye (brilliant yellow, BY). The characterization results demonstrated that superparamagnetic Fe₃O₄ nanoparticles were covered with silica and functionalized with amino groups successfully without losing magnetic character. The effects of adsorbent dosage, contact time, pH, temperature, and dye molecular structure on the adsorption were investigated. Acidic pH was better for both LG and BY, on the other hand, alkaline pH was favorable to some extent for LG in comparison with BY due to the contribution of stacking effect in addition to electrostatic attraction. Kinetic data demonstrated that the driving force for adsorption process could be explained by pseudo-second order mechanism in both systems. The equilibrium data were more compatible with Langmuir isotherm than those of Freundlich isotherm and the maximum adsorption capacities of Fe₃O₄@SiO₂@NH₂ calculated from Langmuir isotherm model for LG and BY at 30?°C and natural pH of the solution were 40.2 and 35.5?mg g^?1. Thermodynamic calculations related to temperature dependence demonstrated that the adsorption process was spontaneous and exothermic.     

Magnetically separable ZnO/ZnFe2O4 and ZnO/CoFe2O4 photocatalysts supported onto nitrogen doped graphene for photocatalytic degradation of toxic dyes

Advanced oxidation processes (AOPs) counting heterogeneous photocatalysis has confirmed as one of the preeminent method for waste water remediation. In the present work, we have successfully fabricated novel visible-light-driven nitrogen-doped graphene (NG) supported magnetic ZnO/ZnFe₂O₄ (ZnO/ZF/NG) and ZnO/CoFe₂O₄ (ZnO/CF/NG) nanocomposites. ZnO synthesized via direct precipitation method. Hydrothermal method was used for the preparation of nitrogen-doped graphene supported magnetic ZnO/ZF (ZnO/ZnFe₂O₄) and ZnO/CF (ZnO/CoFe₂O₄) nanocomposites. The procured materials were scrutinized by assorted characterizations to acquire information on their chemical composition, crystalline structure and photosensitive properties. The absorption and photocatalytic performance of photocatalysts were studied via UV–Visible spectra. Photodegradation performance of the synthesized nanocomposites was estimated toward mineralization of methyl orange (MO) and malachite green (MG) dyes in aqueous solution. The high surface area of ZnO/ZF/NG and ZnO/CF/NG was suitable for adsorptive removal of MO and MG dyes. The photodegradation performance of heterojunction photocatalysts was superior to bare photocatalyst in 140 min under visible-light irradiation. Spectrophotometer, GC–MS (Gas chromatography–mass spectrometry) elucidation was carried out to expose the possible intermediates formed. Both ZnO/ZF/NG and ZnO/CF/NG were rapidly isolated from the aqueous phase by applying an external magnetic field in 20 sec and 2 min, respectively. The photocatalytic performance and stability of ZnO/ZF/NG and ZnO/CF/NG nanocomposites were confirmed by conducting 10 consecutive regeneration cycles. Owing to recyclability of ZnO/ZF/NG and ZnO/CF/NG, these heterogeneous nanocomposites might be used as cost-effective for treatment of discarded water. The observations endorse that the synthesized ternary heterogeneous nanocomposites facilitates wastewater decontamination using photocatalytic technology.     

结晶度对尖晶石LiMn2O4动力学性质的影响

应用溶胶-凝胶法制备两种结晶度尖晶石锂锰氧化物.X射线衍射(XRD)、电感耦合等离子体原子发射光谱(ICP)、扫描电镜(SEM)、恒电流充放电、循环伏安(CV)和交流阻抗谱(EIS)等方法测试表明:以较高温度焙烧制得的L iMn2O4样品结晶度较高,但结晶度较低的样品却具有较高的放电容量和较好的循环稳定性,这主要是结晶度较低的样品具有较快的电荷交换速率和锂离子扩散速率.     

Enhanced adsorption performance of a novel Fe‐Mn‐Zr metal oxide nanocomposite adsorbent for anionic dyes from binary dye mix: Response surface optimization and neural network modeling

A novel adsorbent, Fe‐Mn‐Zr metal oxide nanocomposite was synthesized and investigated for removal of methyl orange (MO) and eosin yellow (EY) dyes from binary dye solution. The magnetic nanocomposite has shown surface area of 143.01 m²/g and saturation magnetization of 15.29 emu/g. Optimization was carried out via response surface methodology (RSM) for optimizing process variables, and optimum dye removal of 99.26% and 99.55% were obtained for MO and EY dye, respectively with contact time 62 min, adsorbent dose 0.45 g/l, initial MO concentration 11.0 mg/l, and initial EY concentration 25.0 mg/l. A feed forward back propagation neural network model has shown better prediction ability than RSM model for predicting MO and EY dye removal (%). Adsorption process strictly follows Langmuir isotherm model, and enhanced adsorption capacities of 196.07 and 175.43 mg/g were observed for MO and EY dye, respectively due to synergistic effects of physicochemical properties of trimetal oxides. Surface adsorption and pore diffusions are the mechanisms involved in the adsorption as revealed from kinetic studies.     

A study of the system CdO-SeO2-H2O at 25 and 100°C

The solubility of the system CdO-SeO₂-H₂O was studied at 25 and 100°C. The fields of crystallization of α-CdSeO₃, 3CdSeO₃·H₂SeO₃ and CdSeO₃·SeO₂ were established at 25°C. At 100°C crystallize α-CdSeO₃, 3CdSeO₃·SeO₂, 2CdSeO₃·SeO₂ and CdSeO₃·SeO₂. The compounds obtained were identified by means of chemical, X-ray and crystal-optical analysis. The mechanism of thermal dissociation of α-CdSeO₃, 3CdSeO₃·H₂SeO₃ and CdSeO₃·SeO₂ was studied. This revised version was published online in August 2006 with corrections to the Cover Date.     

Cation Incorporation and Synergistic Effects on the Characteristics of Sulfur-Doped Manganese Ferrites S@Mn(Fe2O4) Nanoparticles for Boosted Sunlight-Driven Photocatalysis

In the present work, sulfur-doped manganese ferrites S@Mn(Fe₂O₄) nanoparticles were prepared by using the sol-gel and citrate method. The concentration of sulfur varied from 1 to 7% by adding Na₂S. The samples were characterized by performing Fourier Transformed Infrared Spectroscopy (FTIR), Energy Dispersive X-ray (EDX), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Ultraviolet–Visible spectroscopy (UV–Visible). The synthesized sulfur-doped manganese ferrites were applied to evaluate the photocatalytic degradation of the dyes. Further, the degradation studies revealed that the nanoparticles successfully degraded the methylene blue dye by adding a 0.006 g dose under the sunlight. The sulfur-doped manganese ferrite nanoparticles containing 3% sulfur completely degraded the dye in 2 h and 15 min in aqueous medium. Thus, the ferrite nanoparticles were found to be promising photocatalyst materials and could be employed for the degradation of other dyes in the future.     

Inclusion of sulfamethoxazole in a novel CuFe2O4 nanoparticles/mesoporous silica‐based nanocomposite: Release kinetics and antibacterial activity

In this work, we aimed to improve the antibacterial activity of sulfamethoxazole (SMX) via its inclusion in a newly synthesized nanocomposite composed of CuFe₂O₄ nanoparticles and poly(vinyl alcohol)/silica‐based mesoporous materials. Characterization of this formulation using different techniques confirmed the correct synthesis and showed that this mesoporous nanocomposite had an amorphous structure with relatively high surface area of 1,620.7 m² g^?1 and mean pore diameter of 1.6576 nm. Zeta potential of the formulation was obtained to be zero which led to its higher bioavailability in comparison to pure SMX with negative zeta potential. Antibacterial property of the prepared formulation against Staphylococcus aureus and Escherichia coli was evaluated. Minimum inhibitory concentration of the SMX‐loaded mesoporous nanocomposite was considerably lower than those of pure SMX, indicating the efficient function of the mesoporous material as a delivery system. Kinetics of SMX release was also studied using zero‐order, first‐order, Higuchi, and Korsmeyer–Peppas kinetics models. According to the obtained results, the release kinetics was found to obey zero‐order model. So the possibility of sustained release of SMX from the synthesized carrier may be suggested.     

Preparation of magnetic separable CoFe2O4/PAC composite and the adsorption of bisphenol A from aqueous solution

CoFe₂O₄/PAC composite adsorbent has been prepared via an immersing-calcination process, using ethylene diamine tetraacetic acid (EDTA) and citric acid (CIT) ligands containing sol as the CoFe₂O₄ precursor. The microstructure characterization and magnetic property of as-prepared sample were performed by means of XRD and VSM measurements. The adsorption kinetics, isotherms and thermodynamic process toward Bisphenol A molecules (BPA, which is considered as one of the typical endocrine disrupting chemicals) occurred on as-prepared magnetic adsorbent which were investigated by the pseudo-second order kinetic/intraparticle models, the Langmuir/Freundlich adsorption isothermal models and basic chemical thermodynamics principles, respectively.