A Multi‐component All‐DNA Biosensing System Controlled by a DNAzyme

We report on a programmable all‐DNA biosensing system that centers on the use of a 4‐way junction (4WJ) to transduce a DNAzyme reaction into an amplified signal output. A target acts as a primary input to activate an RNA‐cleaving DNAzyme, which then cleaves an RNA‐containing DNA substrate that is designed to be a component of a 4WJ. The formation of the 4WJ controls the release of a DNA output that becomes an input to initiate catalytic hairpin assembly (CHA), which produces a second DNA output that controls assembly of a split G‐quadruplex as a fluorescence signal generator. The 4WJ can be configured to produce either a turn‐off or turn‐on switch to control the degree of CHA, allowing target concentration to be determined in a quantitative manner. We demonstrate this approach by creating a sensor for E. coli that could detect as low as 50 E. coli cells mL^?1 within 85 min and offers an amplified bacterial detection method that does not require a protein enzyme.     

Catalytic Hairpin Assembly‐Programmed DNA Three‐Way Junction for Enzyme‐Free and Amplified Electrochemical Detection of Target DNA

DNA three‐way junctions (DNA 3WJ) have been widely used as important building blocks for the construction of DNA architectures and dynamic assemblies. Herein, we describe for the first time a catalytic hairpin assembly‐programmed DNA three‐way junction (CHA‐3WJ) strategy for the enzyme‐free and amplified electrochemical detection of target DNA. It takes full advantage of the target‐catalyzed hairpin assembly‐induced proximity effect of toehold and branch‐migration domains for the ingenious execution of the strand displacement reaction to form the DNA 3WJ on the electrode surface. A low detection limit of 0.5 pM with an excellent selectivity was achieved for target DNA detection. The developed CHA‐3WJ strategy also offers distinct advantages of simplicity in probe design and biosensor fabrication, as well as enzyme‐free operation. Thus, it opens a promising avenue for applications in bioanalysis, design of DNA‐responsive devices, and dynamic DNA assemblies.     

A Smart Theranostic Nanocapsule for Spatiotemporally Programmable Photo-Gene Therapy

The therapeutic performance of DNAzyme-involved gene silencing is significantly constrained by inefficient conditional activation and insufficient cofactor supply. Herein, a self-sufficient therapeutic nanosystem was realized through the delicate design of DNAzyme prodrugs and MnO₂ into a biocompatible nanocapsule with tumor-specific recognition/activation features. The indocyanine green (ICG)-modified DNA prodrugs are designed by splitting the DNAzyme and then reconstituted into the exquisite catalyzed hairpin assembly (CHA) amplification circuit. Based on the photothermal activation of ICG, the nanocapsule was disassembled to expose the MnO₂ ingredient which was immediately decomposed into Mn²⁺ ions to supplement an indispensable DNAzyme cofactor on-demand with a concomitant O₂ generation for enhancing the auxiliary phototherapy. The endogenous microRNA catalyzes the amplified assembly of DNA prodrugs via an exquisite CHA principle, leading to the DNAzyme-mediated simultaneous silencing of two key tumor-involved mRNAs. This self-activated theranostic nanocapsule could substantially expand the toolbox for accurate diagnosis and programmable therapeutics.     

Imaging Endogenous Metal Ions in Living Cells Using a DNAzyme–Catalytic Hairpin Assembly Probe

DNAzymes are a promising platform for metal ion detection, and a few DNAzyme‐based sensors have been reported to detect metal ions inside cells. However, these methods required an influx of metal ions to increase their concentrations for detection. To address this major issue, the design of a catalytic hairpin assembly (CHA) reaction to amplify the signal from photocaged Na⁺‐specific DNAzyme to detect endogenous Na⁺ inside cells is reported. Upon light activation and in the presence of Na⁺, the NaA43 DNAzyme cleaves its substrate strand and releases a product strand, which becomes an initiator that trigger the subsequent CHA amplification reaction. This strategy allows detection of endogenous Na⁺ inside cells, which has been demonstrated by both fluorescent imaging of individual cells and flow cytometry of the whole cell population. This method can be generally applied to detect other endogenous metal ions and thus contribute to deeper understanding of the role of metal ions in biological systems.     

Imaging Endogenous Metal Ions in Living Cells Using a DNAzyme–Catalytic Hairpin Assembly Probe

DNAzymes are a promising platform for metal ion detection, and a few DNAzyme-based sensors have been reported to detect metal ions inside cells. However, these methods required an influx of metal ions to increase their concentrations for detection. To address this major issue, the design of a catalytic hairpin assembly (CHA) reaction to amplify the signal from photocaged Na⁺-specific DNAzyme to detect endogenous Na⁺ inside cells is reported. Upon light activation and in the presence of Na⁺, the NaA43 DNAzyme cleaves its substrate strand and releases a product strand, which becomes an initiator that trigger the subsequent CHA amplification reaction. This strategy allows detection of endogenous Na⁺ inside cells, which has been demonstrated by both fluorescent imaging of individual cells and flow cytometry of the whole cell population. This method can be generally applied to detect other endogenous metal ions and thus contribute to deeper understanding of the role of metal ions in biological systems.     

Assistant deoxyribonucleic acid recycling with Zn and molecular beacon for electrochemical detection of deoxyribonucleic acid via target-triggered assembly of mutated DNAzyme

A novel enzyme-free amplification strategy was designed for sensitive electrochemical detection of deoxyribonucleic acid (DNA) based on Zn²⁺ assistant DNA recycling via target-triggered assembly of mutated DNAzyme. A gold electrode was used to immobilize molecular beacon (MB) as the recognition probe and perform the amplification procedure. In the presence of target DNA, the hairpin probe 1 was opened, and the DNAzyme was liberated from the caged structure. The activated DNAzyme first hybridized and then cleaved the MB in the presence of cofactor Zn²⁺. After cleavage, the MB was cleaved into two pieces and the ferrocene (Fc) labeled piece dissociated from the gold electrode, thus obviously decreasing the Fc signal and forming a free DNAzyme strand. Finally, each target-induced activated DNAzyme underwent many cycles to trigger the cleavage of many MB substrates. Therefore, the peak current of Fc dramatically decreased to approximately zero. The strategy showed a detection limit at 35 fM levels, which was about 2 orders of magnitude lower than that of the conventional hybridization without Zn²⁺-based amplification. The Zn²⁺ assistant DNA recycling offers a versatile platform for DNA detection in a cost-effective manner, and has a promising application in clinical diagnosis.     

Nucleic Acid Driven DNA Machineries Synthesizing Mg2+‐Dependent DNAzymes: An Interplay between DNA Sensing and Logic‐Gate Operations

Polymerase/nicking enzymes and nucleic‐acid scaffolds are implemented as DNA machines for the development of amplified DNA‐detection schemes, and for the design of logic gates. The analyte nucleic acid target acts, also, as input for the logic gates. In the presence of two DNA targets, acting as inputs, and appropriate DNA scaffolds, the polymerase‐induced replication of the scaffolds, followed by the nicking of the replication products, are activated, leading to the autonomous synthesis of the Mg²⁺‐dependent DNAzyme or the Mg²⁺‐dependent DNAzyme subunits. These biocatalysts cleave a fluorophore/quencher‐functionalized nucleic‐acid substrate, thus providing fluorescence signals for the sensing events or outputs for the logic gates. The systems are used to develop OR, AND, and Controlled‐AND gates, and the DNA‐analyte targets represent two nucleic acid sequences of the smallpox viral genome.     

Sensitive pseudobienzyme electrocatalytic DNA biosensor for mercury(II) ion by using the autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification

Herein, a novel sensitive pseudobienzyme electrocatalytic DNA biosensor was proposed for mercury ion (Hg²⁺) detection by using autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification. Thiol functionalized capture DNA was firstly immobilized on a nano-Au modified glass carbon electrode (GCE). In presence of Hg²⁺, the specific coordination between Hg²⁺ and T could result in the assembly of primer DNA on the electrode, which successfully triggered the HCR to form the hemin/G-quadruplex DNAzyme nanowires with substantial redox probe thionine (Thi). In the electrolyte of PBS containing NADH, the hemin/G-quadruplex nanowires firstly acted as an NADH oxidase to assist the concomitant formation of H₂O₂ in the presence of dissolved O₂. Then, with the redox probe Thi as electron mediator, the hemin/G-quadruplex nanowires acted as an HRP-mimicking DNAzyme that quickly bioelectrocatalyzed the reduction of produced H₂O₂, which finally led to a dramatically amplified electrochemical signal. This method has demonstrated a high sensitivity of Hg²⁺ detection with the dynamic concentration range spanning from 1.0 ng L⁻¹ to 10 mg L⁻¹ Hg²⁺ and a detection limit of 0.5 ng L⁻¹ (2.5 pM) at the 3S_blank level, and it also demonstrated excellent selectivity against other interferential metal ions.     

Enzyme‐Regulated Activation of DNAzyme: A Novel Strategy for a Label‐Free Colorimetric DNA Ligase Assay and Ligase‐Based Biosensing

The DNA nick repair catalyzed by DNA ligase is significant for fundamental life processes, such as the replication, repair, and recombination of nucleic acids. Here, we have employed ligase to regulate DNAzyme activity and developed a homogeneous, colorimetric, label‐free and DNAzyme‐based strategy to detect DNA ligase activity. This novel strategy relies on the ligation‐trigged activation or production of horseradish peroxidase mimicking DNAzyme that catalyzes the generation of a color change signal; this results in a colorimetric assay of DNA ligase activity. Using T4 DNA ligase as a model, we have proposed two approaches to demonstrate the validity of the DNAzyme strategy. The first approach utilizes an allosteric hairpin‐DNAzyme probe specifically responsive to DNA ligation; this approach has a wide detection range from 0.2 to 40 U mL^?1 and a detection limit of 0.2 U mL^?1. Furthermore, the approach was adapted to probe nucleic acid phosphorylation and single nucleotide mismatch. The second approach employs a “split DNA machine” to produce numerous DNAzymes after being reassembled by DNA ligase; this greatly enhances the detection sensitivity by a signal amplification cascade to achieve a detection limit of 0.01 U mL^?1.     

Signal-amplification detection of small molecules by use of Mg2+- dependent DNAzyme

Because small molecules can be beneficial or toxic in biology and the environment, specific and sensitive detection of small molecules is one of the most important objectives of the scientific community. In this study, new signal amplification assays for detection of small molecules based on Mg²⁺-dependent DNAzyme were developed. A cleavable DNA substrate containing a ribonucleotide, the ends of which were labeled with black hole quencher (BHQ) and 6-carboxyfluorescein (FAM), was used for fluorescence detection. When the small molecule of interest is added to the assay solution, the Mg²⁺-dependent DNAzyme is activated, facilitating hybridization between the Mg²⁺-dependent DNAzyme and the DNA substrate. Binding of the substrate to the DNAzyme structure results in hydrolytic cleavage of the substrate in the presence of Mg²⁺ ions. The fluorescence signal was amplified by continuous cleavage of the enzyme substrate. Ochratoxin A (OTA) and adenosine triphosphate (ATP) were used as model analytes in these experiments. This method can detect OTA specifically with a detection limit as low as 140 pmol?L^?1 and detect ATP specifically with a detection limit as low as 13 nmol?L^?1. Moreover, this method is potentially extendable to detection of other small molecules which are able to dissociate the aptamer from the DNAzyme, leading to activation of the DNAzyme.     

A Semisynthetic Bioluminescence Sensor for Ratiometric Imaging of Metal Ions In Vivo Using DNAzymes Conjugated to An Engineered Nano-Luciferase

DNA-based probes have gained significant attention as versatile tools for biochemical analysis, benefiting from their programmability and biocompatibility. However, most existing DNA-based probes rely on fluorescence as the signal output, which can be problematic due to issues like autofluorescence and scattering when applied in complex biological materials such as living cells or tissues. Herein, we report the development of bioluminescent nucleic acid (bioLUNA) sensors that offer laser excitation-independent and ratiometric imaging of the target in vivo. The system is based on computational modelling and mutagenesis investigations of a genetic fusion between circular permutated Nano-luciferase (NLuc) and HaloTag, enabling the conjugation of the protein with a DNAzyme. In the presence of Zn²⁺, the DNAzyme sensor releases the fluorophore-labelled strand, leading to a reduction in bioluminescent resonance energy transfer (BRET) between the luciferase and fluorophore. Consequently, this process induces ratiometric changes in the bioluminescent signal. We demonstrated that this bioLUNA sensor enabled imaging of both exogenous Zn²⁺ in vivo and endogenous Zn²⁺ efflux in normal epithelial prostate and prostate tumors. This work expands the DNAzyme sensors to using bioluminescence and thus has enriched the toolbox of nucleic acid sensors for a broad range of biomedical applications.     

A label-free colorimetric platform for DNA via target-catalyzed hairpin assembly and the peroxidase-like catalytic of graphene/Au-NPs hybrids

A target-catalyzed hairpin assembly (CHA) and graphene/Au-NPs hybrids-based platform has been developed for the determination of DNA. This new sensor not only avoided any labeling but also reduced the background signal. In the absence of target, the assembly of H1 and H2 couldn't be triggered. The catalytic activity of graphene/Au-NPs hybrids was inhibited by adsorption of H1 and H2, leading to the “inactive” hybrids unable to catalyze the oxidation reaction of 3,3′,5,5′-tetramethylbenzidine (TMB). However, with the addition of target DNA, the target-catalyzed hairpin assembly was initiated and produced plenty of H1–H2 duplex, which had a weak binding affinity with the graphene/Au-NPs. Thus, the protected interface of graphene/Au-NPs hybrids became active and catalyzed the oxidation reaction of TMB accompanied with a colorless to-blue color change. This approach exhibited good sensitivity and specificity for target DNA with a detection limit of 5.74 × 10⁻¹¹ M, and realized the assay of target DNA in human serum samples. Besides, this sensor could be further expanded to detect viruses or proteins by adapting the corresponding aptamers, showing great potential in biochemical detections.     

A Smart,Autocatalytic, DNAzyme Biocircuit for in Vivo,Amplified, MicroRNA Imaging

DNAzymes have been recognized as promising transducing agents for visualizing endogenous biomarkers, but their inefficient intracellular delivery and limited amplification capacity (including insufficient cofactor supply) preclude their extensive biological application. Herein, an autocatalytic DNAzyme (ACD) biocircuit is constructed for amplified microRNA imaging in vivo based on a hybridization chain reaction (HCR) and DNAzyme biocatalysis, sustained by a honeycomb MnO₂ nanosponge (hMNS). The hMNS not only delivers DNA probes, but also supplies Mn²⁺ as a DNAzyme cofactor and magnetic resonance imaging (MRI) agent. Through the subsequent cross-activation of HCR and DNAzyme amplicons, the ACD amplifies the limited signal resulting from miRNA recognition. The hMNS/ACD system was used to image microRNA in vivo, thus demonstrating its great promise in cancer diagnosis.     

A Smart,Autocatalytic, DNAzyme Biocircuit for in Vivo,Amplified, MicroRNA Imaging

DNAzymes have been recognized as promising transducing agents for visualizing endogenous biomarkers, but their inefficient intracellular delivery and limited amplification capacity (including insufficient cofactor supply) preclude their extensive biological application. Herein, an autocatalytic DNAzyme (ACD) biocircuit is constructed for amplified microRNA imaging in vivo based on a hybridization chain reaction (HCR) and DNAzyme biocatalysis, sustained by a honeycomb MnO₂ nanosponge (hMNS). The hMNS not only delivers DNA probes, but also supplies Mn²⁺ as a DNAzyme cofactor and magnetic resonance imaging (MRI) agent. Through the subsequent cross‐activation of HCR and DNAzyme amplicons, the ACD amplifies the limited signal resulting from miRNA recognition. The hMNS/ACD system was used to image microRNA in vivo, thus demonstrating its great promise in cancer diagnosis.     

Redox cycling amplified electrochemical detection of DNA hybridization: application to pathogen E. coli bacterial RNA

An electrochemical genosensor in which signal amplification is achieved using p-aminophenol (p-AP) redox cycling by nicotinamide adenine dinucleotide (NADH) is presented. An immobilized thiolated capture probe is combined with a sandwich-type hybridization assay, using biotin as a tracer in the detection probe, and streptavidin-alkaline phosphatase as reporter enzyme. The phosphatase liberates the electrochemical mediator p-AP from its electrically inactive phosphate derivative. This generated p-AP is electrooxidized at an Au electrode modified self-assembled monolayer to p-quinone imine (p-QI). In the presence of NADH, p-QI is reduced back to p-AP, which can be re-oxidized on the electrode and produce amplified signal. A detection limit of 1 pM DNA target is offered by this simple one-electrode, one-enzyme format redox cycling strategy. The redox cycling design is applied successfully to the monitoring of the 16S rRNA of E. coli pathogenic bacteria, and provides a detection limit of 250 CFU μL⁻¹.     

Enzyme‐Mediated Endogenous and Bioorthogonal Control of a DNAzyme Fluorescent Sensor for Imaging Metal Ions in Living Cells

Bioorthogonal control of metal‐ion sensors for imaging metal ions in living cells is important for understanding the distribution and fluctuation of metal ions. Reported here is the endogenous and bioorthogonal activation of a DNAzyme fluorescent sensor containing an 18‐base pair recognition site of a homing endonuclease (I‐SceI), which is found by chance only once in 7×10¹⁰ bp of genomic sequences, and can thus form a near bioorthogonal pair with I‐SceI for DNAzyme activation with minimal effect on living cells. Once I‐SceI is expressed inside cells, it cleaves at the recognition site, allowing the DNAzyme to adopt its active conformation. The activated DNAzyme sensor is then able to specifically catalyze cleavage of a substrate strand in the presence of Mg²⁺ to release the fluorophore‐labeled DNA fragment and produce a fluorescent turn‐on signal for Mg²⁺. Thus I‐SceI bioorthogonally activates the 10–23 DNAzyme for imaging of Mg²⁺ in HeLa cells.     

Target‐stimulated DNAzyme Concatamers Released from Aptasensor for Highly Sensitive and Specific Detection of Progesterone

Aiming at the detection of ultralow concentration target progesterone (Pro), a novel electrochemical aptasensor based on DNAzyme concatamers signal amplification strategy was proposed. The strategy consists of target DNA strands (TDNAs), and two different hairpin DNA molecules (H1 and H2). The signal is amplified by the large amount of DNAzyme. The TDNAs modified on the electrode open H1 structures in sequence and propagate a reaction of hybridization events between two alternating hairpins (H1and H2) to obtain abundant DNAzyme concatamers. Upon target Pro introduction, a specific Pro‐TDNAs reaction was executed, thereby resulting in the release of DNAzyme concatamers from the electrode. Subsequent differential pulse voltammetry(DPV) detection of aminoazobenzene (DAP) resulting by DNAzyme catalyze the oxidation of o‐phenylenediamine (OPD) with the aid of hydrogen peroxide (H₂O₂). Likewise, a small amount of target Pro can efficiently induce the release of a large number of the DNAzyme from the electrode in the form of DNAzyme concatamer. Under optimal conditions, the the proposed assay presents good electrochemical responses for determination of target Pro in the range of 0.5 to 15 ng/mL with the detection limit of 0.36 ng/mL. In addition, the resulting sensor can successfully distinguish Pro from coexisting interfering substance and show good stability and high repeatability. What's more, the methodology has also been demonstrated by assaying Pro‐spiked samples in serum.     

Rapid and sensitive DNA target detection using enzyme amplified electrochemical detection based on microchip

A rapid and sensitive DNA targets detection using enzyme amplified electrochemical detection (ED) based on microchip was described. We employed a biotin‐modified DNA, which reacted with avidin‐conjugated horseradish peroxidase (avidin–HRP) to obtain the HRP‐labeled DNA probe and hybridized with its complementary target. After hybridization, the mixture containing dsDNA‐HRP, excess ssDNA‐HRP, and remaining avidin–HRP was separated by MCE. The separations were performed at a separation voltage of +1.6 kV and were completed in less than 100 s. The HRP was used as catalytic labels to catalyze H₂O₂/o‐aminophenol reaction. Target DNA could be detected by the HRP‐catalyzed reduction with ED. With this protocol, the limits of quantification for the hybridization assay of 21‐ and 39‐mer DNA fragments were of 8×10^?12 M and 1.2×10^?11 M, respectively. The proposed method has been applied satisfactorily in the analysis of Escherichia coli genomic DNA. We selected the detection of PCR amplifications from the gene of E. coli to test the real applicability of our method. By using an asymmetric PCR protocol, we obtained ssDNA targets of 148 bp that could be directly hybridized by the single‐stranded probe and detected with ED.