Anaerobic Respiration on Self-Doped Conjugated Polyelectrolytes: Impact of Chemical Structure

We probe anaerobic respiration of bacteria in the presence of conjugated polyelectrolytes (CPEs). Three different CPEs were used to probe how structural variations impact biocurrent generation from Shewanella oneidensis MR-1. For the self-doped anionic CPE only, absorption spectroscopy shows that the addition of S. oneidensis MR-1 leads to the disappearance of the polaron (radical cation) band at >900 nm and an increase in the band at 735 nm due to the neutral species, consistent with electron transfer from microbe to polymer. Microbial three-electrode electrochemical cells (M3Cs) show an increase in the current generated by S. oneidensis MR-1 with addition of the self-doped CPE relative to other CPEs and controls. These experiments combined with in situ cyclic voltammetry suggest that the doped CPE facilitates electron transport to electrodes and reveal structure–function relationships relevant to developing materials for biotic/abiotic interfaces.     

Enhanced Intrinsic Catalytic Activity of λ‐MnO2 by Electrochemical Tuning and Oxygen Vacancy Generation

Chemically prepared λ‐MnO₂ has not been intensively studied as a material for metal–air batteries, fuel cells, or supercapacitors because of their relatively poor electrochemical properties compared to α‐ and δ‐MnO₂. Herein, through the electrochemical removal of lithium from LiMn₂O₄, highly crystalline λ‐MnO₂ was prepared as an efficient electrocatalyst for the oxygen reduction reaction (ORR). The ORR activity of the material was further improved by introducing oxygen vacancies (OVs) that could be achieved by increasing the calcination temperature during LiMn₂O₄ synthesis; a concentration of oxygen vacancies in LiMn₂O₄ could be characterized by its voltage profile as the cathode in a lithiun–metal half‐cell. λ‐MnO_2?z prepared with the highest OV exhibited the highest diffusion‐limited ORR current (5.5 mA cm^?2) among a series of λ‐MnO_2?z electrocatalysts. Furthermore, the number of transferred electrons (n) involved in the ORR was >3.8, indicating a dominant quasi‐4‐electron pathway. Interestingly, the catalytic performances of the samples were not a function of their surface areas, and instead depended on the concentration of OVs, indicating enhancement in the intrinsic catalytic activity of λ‐MnO₂ by the generation of OVs. This study demonstrates that differences in the electrochemical behavior of λ‐MnO₂ depend on the preparation method and provides a mechanism for a unique catalytic behavior of cubic λ‐MnO₂.     

Bioelectrochemical detection of L-lactate respiration using genetically modified Hansenula polymorpha yeast cells overexpressing flavocytochrome b2

In general, L-lactate respiration is difficult to detect in living yeast cells due to the small activity of L-lactate oxidizing enzymes within the mitochondria. Genetically modified cells of methylotrophic yeast Hansenula polymorpha overproducing L-lactate:cytochrome c-oxidoreductase (EC 1.1.2.3, also known as flavocytochrome b₂, FC b₂) were physically immobilized by means of a dialysis membrane onto various types of electrode materials in order to investigate the possibility of electrochemically detecting L-lactate respiration. It could be shown that in the case of genetically modified Hansenula polymorpha cells in contrast to cells from the parental strain, enhanced L-lactate-dependent respiration could be detected. Due to overproduction of FC b₂ the O₂ reduction current is decreased upon addition of L-lactate to the electrolyte solution. The electron transfer pathway in the L-lactate-dependent respiration process involves a cascade over three redox proteins, FC b₂, cytochrome c and Complex-IV, starting with L-lactate oxidation and ending with oxygen reduction. By means of selective inhibition of Complex IV with CN⁻, lactate respiration could be proven for causing the decrease in the O₂ reduction.     

Biotin-Conjugated Poly(Acrylic Acid)-Grafted Ultrasmall Gadolinium Oxide Nanoparticles for Enhanced Tumor Imaging

Herein, biotin (Bio)-conjugated poly(acrylic acid) (PAA)-grafted ultrasmall gadolinium oxide nanoparticles (Bio-PAA-Gd₂O₃ NPs) were synthesized for enhanced tumor imaging using Bio as a tumor-targeting ligand. The average particle diameter of Gd₂O₃ NPs was 2.1 nm. The Bio-PAA-Gd₂O₃ NPs exhibited excellent colloidal stability (i. e., no precipitation) and a high longitudinal water proton spin relaxivity (r₁) of 23.8 s⁻¹ mM⁻¹ (r₂/r₁=1.6 and r₂=transverse water proton spin relaxivity), which was ∼6 times higher than those of commercial Gd-chelated magnetic resonance imaging (MRI) contrast agents. Cytotoxicity tests using two cell lines showed that the Bio-PAA-Gd₂O₃ NPs were almost non-toxic up to the measured concentration of 500 μM Gd. The enhanced tumor imaging of the Bio-PAA-Gd₂O₃ NPs was demonstrated through their higher positive contrasts and longer contrast retention at the tumor after intravenous injection in T₁ MR images, compared with those of the control PAA-Gd₂O₃ NPs.     

Original close-packed structure and magnetic properties of the Pb4Mn9O20 manganite

The crystal structure of the Pb₄Mn₉O₂₀ compound (previously known as “Pb_0.43MnO_2.18”) was solved from powder X-ray diffraction, electron diffraction, and high resolution electron microscopy data (S.G. Pnma, a=13.8888(2) Å, b=11.2665(2) Å, c=9.9867(1) Å, R_I=0.016, R_P=0.047). The structure is based on a 6H (cch)₂ close packing of pure oxygen “h”-type (O₁₆) layers alternating with mixed “c”-type (Pb₄O₁₂) layers. The Mn atoms occupy octahedral interstices formed by the oxygen atoms of the close-packed layers. The MnO₆ octahedra share edges within the layers, whereas the octahedra in neighboring layers are linked through corner sharing. The relationship with the closely related Pb₃Mn₇O₁₅ structure is discussed. Magnetization measurements reveal a peculiar magnetic behavior with a phase transition at 52 K, a small net magnetization below the transition temperature, and a tendency towards spin freezing.     

The Hybrid of Gold Nanoparticles and 3D Flower‐like MnO2 Nanostructure with Enhanced Activity for Detection of Hydrogen Peroxide

3D Flower‐like manganese dioxide (MnO₂) nanostructure with the ability of catalysis for hydrogen peroxide (H₂O₂) and super large area that can support gold nanoparticles (AuNPs) with enhanced activity of electron transfer have been developed. The nanostructure of hybrids was prepared by directly mixing citric‐capped AuNPs and 3‐aminopropyltriethoxysilane (3‐APTES)‐capped nano‐MnO₂ using an electrostatic adsorption strategy. The Au‐MnO₂ composite was extensively characterized by scanning electron microscope (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), the Brunauer‐Emmett‐Teller (BET) method and X‐ray photoemission spectroscopy (XPS). Electrochemical properties were evaluated through cyclic voltammetry (CV) and amperometric method. The prepared sensor showed excellent electrochemical properties towards H₂O₂ with a wide linear range from 2.5×10⁻³∼1.39 mM and 3.89∼13.89 mM. The detection limit is 0.34 μM (S/N=3) with the sensitivities of 169.43 μA mM⁻¹ cm⁻² and 55.72 μA mM⁻¹ cm⁻². The detection of real samples was also studied. The result exhibited that the prepared sensor can be used for H₂O₂ detection in real samples.     

Proton Transport in the Outer-Membrane Flavocytochrome Complex Limits the Rate of Extracellular Electron Transport

The microbial transfer of electrons to extracellularly located solid compounds, termed extracellular electron transport (EET), is critical for microbial electrode catalysis. Although the components of the EET pathway in the outer membrane (OM) have been identified, the role of electron/cation coupling in EET kinetics is poorly understood. We studied the dynamics of proton transport associated with EET in an OM flavocytochrome complex in Shewanella oneidensis MR-1. Using a whole-cell electrochemical assay, a significant kinetic isotope effect (KIE) was observed following the addition of deuterated water (D₂O). The removal of a flavin cofactor or key components of the OM flavocytochrome complex significantly increased the KIE in the presence of D₂O to values that were significantly larger than those reported for proton channels and ATP synthase, thus indicating that proton transport by OM flavocytochrome complexes limits the rate of EET.     

Studies on the Chemistry of [Cd(NH3)4](MnO4)2. A Low Temperature Synthesis Route of the CdMn2O4+x Type NOx and CH3SH Sensor Precursors

Abstract. [Tetraamminecadmium(II)] bis(permanganate) ( 1 ) was prepared and its crystal structure was elucidated with XRD‐Rietveld refinement and vibrational spectroscopic methods. Compound 1 has a cubic lattice consisting of a 3D hydrogen‐bonded network built as four by four distorted tetrahedral blocks of [Cd(NH₃)₄]²⁺ cations and MnO₄^– anions, respectively. The other four permanganate ions are located in a crystallographically different environment, placed in the cavities formed by the attachment of the building blocks. A low‐temperature (≈100 °C) solid phase quasi‐intramolecular redox reaction producing ammonium nitrate and amorphous CdMn₂O₄ could be established. Neither solid phase nor aqueous solution phase thermal deammoniation of compound 1 can be used to prepare Cd(MnO₄)₂ and [Cd(NH₃)₂(MnO₄)₂]. During deammoniation of compound 1 in aqueous solution a precipitate consisting of Cd(OH)₂ forms. Additionally, solid MnO₂ and ammonium permanganate (NH₄MnO₄) forms. The solid phase deammoniation reaction (toluene used as heat convecting medium) with subsequent aqueous leaching of the ammonium nitrate formed has proved to be an easy and convenient technique for the synthesis of amorphous CdMn₂O_4+x type NO_x and MeSH sensor precursors. The 1 ‐ D perdeuterated complex was also synthesized to distinguish the N–H(D) and O–H(D) fragment signals in the TG‐MS spectra and to elucidate the vibrational characteristics of the overlapping Mn–O and Cd–N frequencies.     

Molybdenum Substitution for Improving the Charge Compensation and Activity of Li2MnO3

Lithium‐rich layer‐structured oxides xLi₂MnO₃? (1?x)LiMO₂ (0<x<1, M=Mn, Ni, Co, etc.) are interesting and potential cathode materials for high energy‐density lithium ion batteries. However, the characteristic charge compensation contributed by O^2? in Li₂MnO₃ leads to the evolution of oxygen during the initial Li⁺ ion extraction at high voltage and voltage fading in subsequent cycling, resulting in a safety hazard and poor cycling performance of the battery. Molybdenum substitution was performed in this work to provide another electron donor and to enhance the electrochemical activity of Li₂MnO₃‐based cathode materials. X‐ray diffraction and adsorption studies indicated that Mo⁵⁺ substitution expands the unit cell in the crystal lattice and weakens the Li?O and Mn?O bonds, as well as enhancing the activity of Li₂MnO₃ by lowering its delithiation potential and suppressing the release of oxygen. In addition, the chemical environment of O^2? ions in molybdenum‐substituted Li₂MnO₃ is more reversible than in the unsubstituted sample during cycling. Therefore molybdenum substitution is expected to improve the performances of the Li₂MnO₃‐based lithium‐rich cathode materials.     

Cyclic voltammetric study on the catalysis of electrodeposited manganese oxide on the electrochemical oxygen reduction reaction (ORR) in room temperature ionic liquids (RTILs) of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF<Subscript>4</Subscript>) on glassy carbon clectrode

For the first time, the electrochemical oxygen reduction reaction (ORR), was investigated using cyclic voltammetry (CV) on the electrodeposited manganese oxide (MnO _x )-modified glassy carbon (MnO _x -GC) electrode in the room temperature ionic liquids (RTILs) of EMIBF₄, i.e. 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF₄). The results demonstrated that, after being modified by MnO _x on a GC electrode, the reduction peak current of oxygen was increased to some extent, while the oxidation peak current, corresponding to the oxidation of superoxide anion, i.e., O₂⁻ was attenuated in some degree, suggesting that MnO _x could catalyze ORR in RTILs of EMIBF₄, which is consistent with the results obtained in aqueous solution. To accelerate the electron transfer rate, multi-walled carbon nanotubes (MWCNTs) was modified the GC electrode, and then MnO _x was electrodeposited onto the MWCNTs-modified GC electrode to give rise to a MnO _x /MWCNTs-modified GC electrode, consequently, the improved standard rate constant, k_s, originated from the modified MWCNTs, along with the modification of electrodeposited MnO _x , showed us a satisfactory electrocatalysis for ORR in RTILs of EMIBF₄. Published in Russian in Elektrokhimiya, 2009, Vol. 45, No. 3, pp. 340–345. The article is published in the original.     

Immunosensor based on carbon nanotube/manganese dioxide electrochemical tags

This article reports on carbon nanotube/manganese dioxide (CNT–MnO₂) composites as electrochemical tags for non-enzymatic signal amplification in immunosensing. The synthesized CNT–MnO₂ composites showed good electrochemical activity, electrical conductivity and stability. The electrochemical signal of CNT–MnO₂ composites coated glassy carbon electrode (GCE) increased by nearly two orders of magnitude compared to bare GCE in hydrogen peroxide (H₂O₂) environment. CNT–MnO₂ composite was subsequently validated as electrochemical tags for sensitive detection of α-fetoprotein (AFP), a tumor marker for diagnosing hepatocellular carcinoma. The electrochemical immunosensor demonstrated a linear response on a log-scale for AFP concentrations ranging from 0.2 to 100 ng mL⁻¹. The limit of detection (LOD) was estimated to be 40 pg mL⁻¹ (S/N = 3) in PBS buffer. Further measurements using AFP spiked plasma samples revealed the applicability of fabricated CNT–MnO₂ composites for clinical and diagnostic applications.     

Surface and Structural Investigation of a MnOx Birnessite‐Type Water Oxidation Catalyst Formed under Photocatalytic Conditions

Catalytically active MnO_x species have been reported to form in situ from various Mn‐complexes during electrocatalytic and solution‐based water oxidation when employing cerium(IV) ammonium ammonium nitrate (CAN) oxidant as a sacrificial reagent. The full structural characterization of these oxides may be complicated by the presence of support material and lack of a pure bulk phase. For the first time, we show that highly active MnO_x catalysts form without supports in situ under photocatalytic conditions. Our most active ⁴MnO_x catalyst (～0.84 mmol O₂ mol Mn^?1 s^?1) forms from a Mn₄O₄ bearing a metal–organic framework. ⁴MnO_x is characterized by pair distribution function analysis (PDF), Raman spectroscopy, and HR‐TEM as a disordered, layered Mn‐oxide with high surface area (216 m²g^?1) and small regions of crystallinity and layer flexibility. In contrast, the ^SMnO_x formed from Mn²⁺ salt gives an amorphous species of lower surface area (80 m²g^?1) and lower activity (～0.15 mmol O₂ mol Mn^?1 s^?1). We compare these catalysts to crystalline hexagonal birnessite, which activates under the same conditions. Full deconvolution of the XPS Mn2p_3/2 core levels detects enriched Mn³⁺ and Mn²⁺ content on the surfaces, which indicates possible disproportionation/comproportionation surface equilibria.     

Sensitive electrochemical detection of bisphenol A with chitosan and urchinlike MnO2 microsphere modified carbon ionic liquid electrode

In this article, a carbon ionic liquid electrode (CILE) was fabricated by using ionic liquid N-hexylpyridinium hexafluorophosphate as the binder and the modifier. Then urchinlike MnO₂ microsphere and chitosan (CTS) was further casted on the CILE surface step-by-step to get a modified electrode that was denoted as CTS/MnO₂/CILE. Cyclic voltammetric studies indicated that bisphenol A (BPA) exhibited a well-defined oxidation peak at 0.486 V in 22.83 g L^?1 pH 8.0 Britton?Robinson buffer solution, which was attributed to the electro-oxidation of BPA on the modified electrode. The presence of urchinlike MnO₂ microsphere on the electrode surface could increase the oxidation peak current (I_pa) greatly, which may be due to the larger surface area that could adsorb more BPA on the electrode surface. Electrochemical parameters of BPA on the modified electrode were calculated with the electron transfer coefficient (α) as 0.66 and the apparent heterogeneous electron transfer rate constant (ks) as 0.50 s^?1. Under the optimal conditions, a linear relationship between the I_pa of BPA and its concentration was obtained in the range from 1.37 × 10^–1 mg L^?1 to 182.6 mg L^?1 with the detection limit as 7.31 × 10^–3 mg L^?1 (3σ). The CTS/MnO₂/CILE was applied to the detection of BPA content in different kinds of samples with satisfactory results.     

MnO2上氧气第一个电子转移步骤的从头计算研究

采用裸露簇和嵌入簇模型, 对β-MnO₂ (001), (110), (111)三个晶面以及O₂在(110)晶面的单址吸附模式(Pauling和Griffths模式), 进行从头计算. 从β-MnO₂ (001), (110), (111)三个晶面的电子结构差异以及O₂在(110)晶面吸附的吸附能、几何结构、集居数以及净电荷数分析得到: (001), (110), (111)三个晶面中(110)晶面的催化活性最高, 其活性顺序为(110)＞(111)＞(001). 氧气在(110)晶面的吸附, Pauling和Griffths两种吸附模式均存在, 属于化学吸附中的离子吸附. 氧气与MnO₂固体间发生了单电子转移, 氧气得到电子被还原成O₂^-, 转移电子属于整个体系, 具有离域性.     

Assembly of Pt nanoparticles on electrospun In2O3 nanofibers for H2S detection

In this paper, we presented a simple and effective solution route to deposit Pt nanoparticles on electrospun In₂O₃ nanofibers for H₂S gas detection. The morphology and chemical structure of the as-prepared samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectra (XPS). The results showed that large quantities of In₂O₃ nanofibers with diameters about from 60 to 100 nm were obtained and the surface of them was decorated with Pt nanoparticles (5–10 nm in size). The In₂O₃ nanofibers decorated by Pt nanoparticles exhibited excellent gas sensing properties to H₂S, such as high sensitivity, good selectivity and fast response at relatively low temperature.     

A novel non-enzyme hydrogen peroxide sensor based on an electrode modified with carbon nanotube-wired CuO nanoflowers

We have prepared a novel sensor for hydrogen peroxide that is based on a glassy carbon electrode modified with a film containing multi-walled carbon nanotubes wired to CuO nanoflowers. The nanoflowers were characterized by X-ray powder diffraction, and the electrode was characterized by cyclic voltammetry (CV) and scanning electron microscopy. The response of the modified electrode towards hydrogen peroxide was investigated by CV and chronoamperometry and showed it to exhibit high electrocatalytic activity, with a linear range from 0.5?μM to 82?μM and a detection limit of 0.16?μM. The sensor also displays excellent selectivity and stability.

Electrocatalytic activity and stability of Ti/IrO2 + MnO2 anode in 0.5 M NaCl solution

Ti/IrO₂(x) + MnO₂(1-x) anodes have been fabricated by thermal decomposition of a mixed H₂IrCl₆ and Mn(NO₃)₂ hydrosolvent. Cyclic voltammetry (CV) and polarization curve have been utilized to investigate the electrochemical behavior and electrocatalytic activity of Ti/IrO₂(x) + MnO₂(1-x) anodes in 0.5 M NaCl solution (pH = 2). Ti/IrO₂+MnO₂ anode with 70 mol% IrO₂ content has the maximum value of q*, indicating that Ti/IrO₂(0.7) + MnO₂(0.3) anode has the most excellent electrocatalytic activity for the synchronal evolution of Cl₂ and O₂ in dilute NaCl solution. Tafel lines displayed two distinct linear regions with one of the slope close to 62 mV dec⁻¹ in the low potential region and the other close to 295 mV dec⁻¹ in the high potential region. Electrochemical impedance spectroscopic is employed to investigate the impedance behavior of Ti/IrO₂(x) + MnO₂(1-x) anodes in 0.5 M NaCl solution. It is observed that as the R _ct, R _s and R _f values for Ti/IrO₂(0.7) + MnO₂(0.3) anode become smaller, electrocatalytic activity of Ti/IrO₂(0.7) + MnO₂(0.3) anode becomes better than that of other Ti/IrO₂ + MnO₂ anodes with different compositions. Ti/IrO₂(0.7) + MnO₂(0.3) anode fabricated at 400 °C has been observed to possess the highest service life of 225 h, whereas the accelerated life test is carried out under the anodic current of 2 A cm⁻² at the temperature of 50 °C in 0.5 M NaCl solution (pH = 2).     

Influence of polycrystalline MoS2 nanoflowers on mouse breast cancer cell proliferation via molten salt sintering

In this paper, polycrystalline molybdenum disulfide (MoS₂) nanoflowers were prepared by mixing ammonium molybdate tetrahydrate [(NH₄)₆Mo₇O₂₄·4H₂O] and potassium thiocyanate (KSCN) at 300 °C for 2 h via molten salt sintering method. Under scanning electron microscope (SEM) and high-resolution transmission electron microscope (HRTEM), MoS₂ showed popcorn-like shape, which surface distribution defects were easy to be further modified. MoS₂ as a nano-enzyme was used to inhibit the proliferation of mouse breast cancer cells (4 T1), which had 69.8 % inhibitory effect on 4 T1 cell proliferation. Electron spin resonance (ESR) analysis showed that MoS₂ could produce a large number of stable hydroxyl radicals (–OH). The disulfide bond in MoS₂ was highly sensitive to reactive oxygen species (ROS). High ROS level leads to the death of cancer cells under oxidative stress and inhibits the proliferation of 4 T1. This work demonstrates that MoS₂ is a potential anticancer drug or carrier for cancer treatment.     

Facile Synthesis of MOF-derived Mn3O4@N-doped Carbon with Efficient Oxygen Reduction

Integration of MnO_x into the carbon matrix proves a viable strategy to improve the electrochemical performance of MnO_x materials. Mn₃O₄ nanoparticle-decorated N-doped carbon composites (Mn₃O₄@N-doped carbon) were facilely prepared from a non-porous eight-fold interpenetrated Zn^II-based MOF, which involves first synthesis of bimetallic Mn/Zn-MOF in one-pot reaction followed by direct pyrolysis at 1000 °C. In 0.1 m KOH solution, the optimal Mn₃O₄@N-doped carbon exhibits decent oxygen reduction activity with the onset potential (E_onset) of 0.94 V (vs. RHE) and half-wave potential (E_1/2) of 0.81 V (vs. RHE), excellent methanol tolerance as well as good durability.     

Boosting Water Oxidation through In Situ Electroconversion of Manganese Gallide: An Intermetallic Precursor Approach

For the first time, the manganese gallide (MnGa₄) served as an intermetallic precursor, which upon in situ electroconversion in alkaline media produced high‐performance and long‐term‐stable MnO_x‐based electrocatalysts for water oxidation. Unexpectedly, its electrocorrosion (with the concomitant loss of Ga) leads simultaneously to three crystalline types of MnO_x minerals with distinct structures and induced defects: birnessite δ‐MnO₂, feitknechtite β‐MnOOH, and hausmannite α‐Mn₃O₄. The abundance and intrinsic stabilization of Mn^III/Mn^IV active sites in the three MnO_x phases explains the superior efficiency and durability of the system for electrocatalytic water oxidation. After electrophoretic deposition of the MnGa₄ precursor on conductive nickel foam (NF), a low overpotential of 291 mV, comparable to that of precious‐metal‐based catalysts, could be achieved at a current density of 10 mA cm^?2 with a durability of more than five days.