Ru-Doping Enhanced Electrocatalysis of Metal–Organic Framework Nanosheets toward Overall Water Splitting

An Ru-doping strategy is reported to substantially improve both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalytic activity of Ni/Fe-based metal–organic framework (MOF) for overall water splitting. As-synthesized Ru-doped Ni/Fe MIL-53 MOF nanosheets grown on nickel foam (MIL-53(Ru-NiFe)@NF) afford HER and OER current density of 50 mA cm⁻² at an overpotential of 62 and 210 mV, respectively, in alkaline solution with a nominal Ru loading of ≈110 μg cm⁻². When using as both anodic and cathodic (pre-)catalyst, MIL-53(Ru-NiFe)@NF enables overall water splitting at a current density of 50 mA cm⁻² for a cell voltage of 1.6 V without iR compensation, which is much superior to state-of-the-art RuO₂-Pt/C-based electrolyzer. It is discovered that the Ru-doping considerably modulates the growth of MOF to form thin nanosheets, and enhances the intrinsic HER electrocatalytic activity by accelerating the sluggish Volmer step and improving the intermediate oxygen adsorption for increased OER catalytic activity.     

Partially Pyrolyzed Binary Metal–Organic Framework Nanosheets for Efficient Electrochemical Hydrogen Peroxide Synthesis

Herein, we developed a partially controlled pyrolysis strategy to create evenly distributed NiO nanoparticles within NiFe-MOF nanosheets (MOF NSs) for electrochemical synthesis of H₂O₂ by a two-electron oxygen reduction reaction (ORR). The elemental Ni can be partially transformed to NiO and uniformly distributed on the surface of the MOF NSs, which is crucial for the formation of the particular structure. The optimized MOF NSs-300 exhibits the highest activity for ORR with near-zero overpotential and excellent H₂O₂ selectivity (ca. 99 %) in 0.1 m KOH solution. A high-yield H₂O₂ production rate of 6.5 mol g_cat⁻¹ h⁻¹ has also been achieved by MOF NSs-300 in 0.1 m KOH and at 0.6 V (vs. RHE). In contrast to completely pyrolyzed products, the enhanced catalytic activities of partially pyrolyzed MOF NSs-300 originates mainly from the retained MOF structure and the newly generated NiO nanoparticles, forming the coordinatively unsaturated Ni atoms and tuning the performance towards electrochemical H₂O₂ synthesis.     

Defect Engineered Metal–Organic Framework with Accelerated Structural Transformation for Efficient Oxygen Evolution Reaction

Metal–organic frameworks (MOFs) have been increasingly applied in oxygen evolution reaction (OER), and the surface of MOFs usually undergoes structural transformation to form metal oxyhydroxides to serve as catalytically active sites. However, the controllable regulation of the reconstruction process of MOFs remains as a great challenge. Here we report a defect engineering strategy to facilitate the structural transformation of MOFs to metal oxyhydroxides during OER with enhanced activity. Defective MOFs (denoted as NiFc′_xFc_1-x) with abundant unsaturated metal sites are constructed by mixing ligands of 1,1′-ferrocene dicarboxylic acid (Fc′) and defective ferrocene carboxylic acid (Fc). NiFc′_xFc_1-x series are more prone to be transformed to metal oxyhydroxides compared with the non-defective MOFs (NiFc′). Moreover, the as-formed metal oxyhydroxides derived from defective MOFs contain more oxygen vacancies. NiFc′Fc grown on nickel foam exhibits excellent OER catalytic activity with an overpotential of 213 mV at the current density of 100 mA cm⁻², superior to that of undefective NiFc′. Experimental results and theoretical calculations suggest that the abundant oxygen vacancies in the derived metal oxyhydroxides facilitate the adsorption of oxygen-containing intermediates on active centers, thus significantly improving the OER activity.     

Isostructural NiII Metal–Organic Frameworks (MOFs) for Efficient Electrocatalysis of Oxygen Evolution Reaction and for Gas Sorption Properties

Design and synthesis of stable, active and cost-effective electrocatalyst for water splitting applications is an emerging area of research, given the depletion of fossil fuels. Herein, two isostructural Ni^II redox-active metal–organic frameworks (MOFs) containing flexible tripodal trispyridyl ligand ( L ) and linear dicarboxylates such as terephthalate (TA) and 2-aminoterphthalate (H₂NTA) are studied for their catalytic activity in oxygen evaluation reaction (OER). The 2D-layered MOFs form 3D hydrogen bonded frameworks containing one-dimensional hydrophilic channels that are filled with water molecules. The electrochemical studies reveal that MOFs display an efficient catalytic activity towards oxygen evolution reaction in alkaline conditions with an overpotential as low as 356 mV. Further, these 2D-MOFs exhibit excellent ability to adsorb water vapor (180–230 cc g⁻¹ at 273 K) and CO₂ (33 cc g⁻¹ at 273 K). The presence of hydrophilic functionality in the frameworks was found to significantly enhance the electrocatalytic activity as well as H₂O sorption.     

Two-Dimensional Metal–Organic Framework Nanosheets with Cobalt-Porphyrins for High-Performance CO2 Electroreduction

The electrochemical reduction of CO₂ presents a promising strategy to mitigate the greenhouse effect and reduce excess carbon dioxide emission to realize a carbon-neutral energy cycle, but it suffers from the lack of high-performance electrocatalysts. In this work, catalytic active cobalt porphyrin [TCPP(Co)=(5,10,15,20)-tetrakis(4-carboxyphenyl)porphyrin-Co^II] was precisely anchored onto water-stable 2D metal–organic framework (MOF) nanosheets (Zr-BTB) to obtain ultrathin 2D MOF nanosheets [TCPP(Co)/Zr-BTB] with accessible catalytic sites for the CO₂ reduction reaction. Compared with molecular cobalt porphyrin, the TCPP(Co)/Zr-BTB exhibits an ultrahigh turnover frequency (TOF=4768 h⁻¹ at −0.919 V vs. reversible hydrogen electrode, RHE) owing to high active-site utilization. In addition, three post-modified 2D MOF nanosheets [TCPP(Co)/Zr-BTB-PABA, TCPP(Co)/Zr-BTB-PSBA, TCPP(Co)/Zr-BTB-PSABA] were obtained, with the modifiers of p-(aminomethyl)benzoic acid (PABA), p-sulfobenzoic acid potassium (PSBA), and p-sulfamidobenzoic acid (PSABA), to change the micro-environments around TCPP(Co) through the tuning of steric effects. Among them, the TCPP(Co)/Zr-BTB-PSABA exhibited the best performance with a faradaic efficiency (FE_CO) of 85.1 %, TOF of 5315 h⁻¹, and j_total of 6 mA cm⁻² at −0.769 V (vs. RHE). In addition, the long-term durability of the electrocatalysts is evaluated and the role of pH buffer is revealed.     

2D Metal–Organic Framework Nanosheets based on Pd-TCPP as Photocatalysts for Highly Improved Hydrogen Evolution

In this report, a 2D MOF nanosheet derived Pd single-atom catalyst, denoted as Pd-MOF, was fabricated and examined for visible light photocatalytic hydrogen evolution reaction (HER). This Pd-MOF can provide a remarkable photocatalytic activity (a H₂ production rate of 21.3 mmol/gh in the visible range), which outperforms recently reported Pt-MOFs (with a H₂ production rate of 6.6 mmol/gh) with a similar noble metal loading. Notably, this high efficiency of Pd-MOF is not due to different chemical environment of the metal center, nor by changes in the spectral light absorption. The higher performance of the Pd-MOF in comparison to the analogue Pt-MOF is attributed to the longer lifetime of the photogenerated electron-hole pairs and higher charge transfer efficiency.     

Metal Organic Framework Glasses: A New Platform for Electrocatalysis?

Metal organic framework (MOF) glasses are a coordination network of metal nodes and organic ligands as an undercooled frozen-in liquid, and have therefore broadened the potential of MOF materials in the fundamental research and application scenarios. On the road to deploying MOF glasses as electrocatalysts, it remains several basic scientific hurdles although MOF glasses not only inherit the structural merits of MOFs but also endow with active catalytic features including concentrated defects, metal centers and disorder structure etc. The research on the ionic conductivity, catalytic stability and reactivity of MOF glasses has yielded scientific insights towards its electrocatalytic applications. Here, we first comb the history, definition and basic properties of MOF glasses. Then, we identify the main synthetic methods and characterization techniques. Finally, we advance the potentials and challenges of MOF glasses as electrocatalysts in furthering the understanding of these themes.     

A New Biscarbazole-Based Metal–Organic Framework for Efficient Host–Guest Energy Transfer

A new metal–organic framework (MOF), [Zn₆L₄(Me₂NH₂⁺)₄⋅3 H₂O] ( 1 ) was constructed based on [9, 9′-biscarbazole]-3, 3′, 6, 6′-tetracarboxylic acid (H₄L) and Zn²⁺ ions. The porous framework and intense blue fluorescence of the MOF based on the biscarbazole moiety of the ligand could facilitate efficient host to guest energy transfer, which makes it an ideal platform for the tuning of luminescence.     

3D Nitrogen-Doped Graphene Encapsulated Metallic Nickel–Iron Alloy Nanoparticles for Efficient Bifunctional Oxygen Electrocatalysis

It is extremely desirable to explore high-efficient, affordable and robust oxygen electrocatalysts toward rechargeable Zn–air batteries (ZABs). A 3D porous nitrogen-doped graphene encapsulated metallic Ni₃Fe alloy nanoparticles aerogel (Ni₃Fe-GA₁) was constructed through a facile hydrothermal assembly and calcination process. Benefiting from 3D porous configuration with great accessibility, high electrical conductivity, abundant active sites, optimal nitrogen content and strong electronic interactions at the Ni₃Fe/N-doped graphene heterointerface, the obtained aerogel showed outstanding catalytic performance toward the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Specifically, it exhibited an overpotential of 239 mV to attain 10 mA cm⁻² for OER, simultaneously providing a positive onset potential of 0.93 V within a half-wave potential of 0.8 V for ORR. Accordingly, when employed in the aqueous ZABs, Ni₃Fe-GA₁ achieved higher power density and superior reversibility than Pt/C−IrO₂ catalyst, making it a potential candidate for rechargeable ZABs.     

Surface Reorganization on Electrochemically-Induced Zn–Ni–Co Spinel Oxides for Enhanced Oxygen Electrocatalysis

Herein, we highlight redox-inert Zn²⁺ in spinel-type oxide (Zn_XNi_1−XCo₂O₄) to synergistically optimize physical pore structure and increase the formation of active species on the catalyst surface. The presence of Zn²⁺ segregation has been identified experimentally and theoretically under oxygen-evolving condition, the newly formed V_Zn−O−Co allows more suitable binding interaction between the active center Co and the oxygenated species, resulting in superior ORR performance. Moreover, a liquid flow Zn–air battery is constituted employing the structurally optimized Zn_0.4Ni_0.6Co₂O₄ nanoparticles supported on N-doped carbon nanotube (ZNCO/NCNTs) as an efficient air cathode, which presents remarkable power density (109.1 mW cm⁻²), high open circuit potential (1.48 V vs. Zn), excellent durability, and high-rate performance. This finding could elucidate the experimentally observed enhancement in the ORR activity of Zn_XNi_1−XCo₂O₄ oxides after the OER test.     

Ionic Polyimide Derived Porous Carbon Nanosheets as High-Efficiency Oxygen Reduction Catalysts for Zn–Air Batteries

Two-dimensional (2D) porous carbon nanosheets (2DPCs) have attracted great attention for their good porosity and long-distance conductivity. Factors such as templates, precursors, and carbonization–activation methods, directly determine their performance. However, rational design and preparation of porous carbon materials with controlled 2D morphology and heteroatom dopants remains a challenge. Therefore, an ionic polyimide with both sp²- and sp³-hybridized nitrogen atoms was prepared as a precursor for fabricating N-doped hexagonal porous carbon nanosheets through a hard-template approach. Because of the large surface area and efficient charge-mass transport, the resulting activated 2D porous carbon nanosheets (2DPCs-a) displayed promising electrocatalytic properties for oxygen reduction reaction (ORR) in alkaline and acidic media, such as ultralow half-wave potential (0.83 vs. 0.84 V of Pt/C) and superior limiting current density (5.42 vs. 5.14 mA cm⁻² of Pt/C). As air cathodes in Zn–air batteries, the as-developed 2DPCs-a exhibited long stability and high capacity (up to 614 mA h g⁻¹), which are both higher than those of commercial Pt/C. This work provides a convenient method for controllable and scalable 2DPCs fabrication as well as new opportunities to develop high-efficiency electrocatalysts for ORR and Zn–air batteries.     

Parallel Lipid Peroxide Accumulation Strategy Based on Bimetal–Organic Frameworks for Enhanced Ferrotherapy

Ferroptosis, a nonapoptotic cell-death pathway, is commonly regulated by ether lipid peroxide generation or glutathione consumption. In this work, a parallel lipid peroxide accumulation strategy was designed based on catalytic metal–organic frameworks (MOFs) for enhanced ferrotherapy. The bimetallic MOF was synthesized with iron porphyrin as a linker and cupric ion as a metal node, and erastin, a ferroptosis inducer, was sandwiched between the MOF layers with 4,4′-dipyridyl disulfide as spacers. In a tumor microenvironment, erastin was released from the layered MOFs through glutathione-responsive cleavage. The exfoliated MOFs served as a dual Fenton reaction inducer to generate numerous hydroxyl radicals for the accumulation of lipid peroxide, while erastin-aggravated glutathione depletion down-regulated glutathione peroxidase 4; this then inhibited the consumption of lipid peroxide. Therefore, a parallel lipid peroxide accumulation strategy was established for enhanced ferrotherapy that effectively inhibited tumor growth in live mice, opening up new opportunities to treat apoptosis-insensitive tumors.     

Hierarchical Porous N-Doped Carbon Nanosheets Obtained by Organic–Inorganic Bipolymeric Engineering for Improved Lithium–Sulfur Batteries

A new route for obtaining N-doped carbon nanosheets through an in situ solid-state thermal organic–inorganic polymerization and carbonization method, with glucose and melamine as precursors, due to different temperature intervals for glucose or melamine polymerization, is reported. At a current rate of 0.2 C, as a cathode for a lithium–sulfur cell, the N-doped carbon nanosheet/sulfur hybrid delivers a high capacity of 1313 and 722 mA h g⁻¹ in the 1st and 200th cycles, respectively; these values are over 40 % higher than that of cells with glucose-derived carbon nanosheets.     

Electric-Field Assisted In Situ Hydrolysis of Bulk Metal–Organic Frameworks (MOFs) into Ultrathin Metal Oxyhydroxide Nanosheets for Efficient Oxygen Evolution

Facile preparation of low-cost electrocatalysts for efficient oxygen evolution reaction (OER) remains a big challenge. Herein, a novel strategy for ultrafast (20 s) transformation of bulk metal–organic frameworks (MOFs) into ultrathin metal oxyhydroxide nanosheets for efficient OER has been developed. For two isomeric MOFs ( FJI-H25Fe and FJI-H25FeCo ), only the metastable FJI-H25FeCo bulk can immediately transform into FeCo-oxyhydroxides nanosheets through electric-field assisted hydrolysis. The potential evolution process from MOF bulk to FeCo-oxyhydroxides nanosheets has been investigated in detail. The as-made nanosheets exhibit excellent OER performances, showing an extremely low overpotential of 231 mV at the current density of 10 mA cm⁻², a relatively small Tafel slope of 42 mV dec⁻¹, and long-term durability of at least 30 h. This work not only provides a novel strategy for facile preparation of low-cost and efficient OER electrocatalysts, but also represents a new way for preparation of metal oxyhydroxides nanosheets with good crystallinity and morphology, and a fresh method for mild synthesis of nanosized derivatives from MOF materials.     

MOF-Mediated Fabrication of a Porous 3D Superstructure of Carbon Nanosheets Decorated with Ultrafine Cobalt Phosphide Nanoparticles for Efficient Electrocatalysis and Zinc–Air Batteries

Superstructures have attracted great interest owing to their potential applications. Herein, we report the first scalable preparation of a porous nickel-foam-templated superstructure of carbon nanosheets decorated with ultrafine cobalt phosphide nanoparticles. Uniform two-dimensional (2D) Co-metal organic framework (MOF) nanosheets (Co-MNS) grow on nickel foam, followed by a MOF-mediated tandem (carbonization/phosphidation) pyrolysis. The resulting superstructure has a porous 3D interconnected network with well-arranged 2D carbon nanosheets on it, in which ultrafine cobalt phosphide nanoparticles are tightly immobilized. A single piece of this superstructure can be directly used as a self-supported electrode for electrocatalysis without any binders. This “one-piece” porous superstructure with excellent mass transport and electron transport properties, and catalytically active cobalt phosphide nanoparticles with ultrasmall size (3–4 nm), shows excellent trifunctional electrocatalytic activities for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and oxygen reduction reaction (ORR), achieving great performances in water splitting and Zn–air batteries.     

Metal-Carboxyl Helical Chain Secondary Units Supported Ion-Exchangeable Anionic Uranyl–Organic Framework

As a less explored avenue, actinide-based metal-organic frameworks (MOFs) are worth studying for the particularity of actinide nodes in coordination behaviour and assembly modes. In this work, an azobenzenetetracarboxylate-based anionic MOF supported by uranyl–carboxyl helical chain units was synthesized, incorporating linear uranyl as the metal centre. This kind of helical chain-type building unit is reported for the first time in uranyl-based MOFs. Structural analysis reveals that the formation of helical chain secondary units can be attributed to restricted equatorial coordination of rigid flat azobenzene ligand to uranyl centres. Meanwhile, this newly-synthesized anionic material has been used to remove Eu³⁺ ions, as a non-radioactive surrogate of Am³⁺ ion, through an ion-exchange process with [(CH₃)₂NH₂]⁺ ions in its open channels, as evidenced by a combination of ¹H NMR spectroscopy, EDS and PXRD.     

Designing Heteroatom-Codoped Iron Metal–Organic Framework for Promotional Photoreduction of Carbon Dioxide to Ethylene

Rational engineering active sites and vantage defects of catalysts are promising but grand challenging task to enhance photoreduction CO₂ to high value-added C2 products. In this study, we designed an N,S-codoped Fe-based MIL-88B catalyst with well-defined bipyramidal hexagonal prism morphology via a facile and effective process, which was synthesized by addition of appropriate 1,2-benzisothiazolin-3-one (BIT) and acetic acid to the reaction solution. Under simulated solar irradiation, the designed catalyst exhibits high C₂H₄ evolution yield of 17.7 μmol g⁻¹⋅h, which has been rarely achieved in photocatalytic CO₂ reduction process. The synergistic effect of Fe-N coordinated sites and reasonable defects in the N,S-codoped photocatalyst can accelerate the migration of photogenerated carriers, resulting in high electron density, and this in turn helps to facilitate the formation and dimerization of C−C coupling intermediates for C₂H₄ effectively.     

CoPd Nanoalloys with Metal–Organic Framework as Template for Both N-Doped Carbon and Cobalt Precursor: Efficient and Robust Catalysts for Hydrogenation Reactions

In this work, a series of metal–organic framework (MOF)-derived CoPd nanoalloys have been prepared. The nanocatalysts exhibited excellent activities in the hydrogenation of nitroarenes and alkenes in green solvent (ethanol/water) under mild conditions (H₂ balloon, room temperature). Using ZIF-67 as template for both carbon matrix and cobalt precursor coating with a mesoporous SiO₂ layer, the catalyst CoPd/NC@SiO₂ was smoothly constructed. Catalytic results revealed a synergistic effect between Co and Pd components in the hydrogenation process due to the enhanced electron density. The mesoporous SiO₂ shell effectively prevented the sintering of hollow carbon and metal NPs at high temperature, furnishing the well-dispersed nanoalloy catalysts and better catalytic performance. Moreover, the catalyst was durable and showed negligible activity decay in recycling and scale-up experiments, providing a mild and highly efficient way to access amines and arenes.     

2D Metal–Organic Framework Derived CuCo Alloy Nanoparticles Encapsulated by Nitrogen-Doped Carbonaceous Nanoleaves for Efficient Bifunctional Oxygen Electrocatalyst and Zinc–Air Batteries

The development of efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) still remains a challenge in a wide range of renewable energy technologies. Herein, CuCo alloy nanoparticles encapsulated by nitrogen-doped carbonaceous nanoleaves (CuCo-NC) have been synthesized from a Cu(OH)₂/2D leaf-like zeolitic imidazolate framework (ZIF-L)-pyrolysis approach. Leaf-like Cu(OH)₂ is first prepared by the ultrasound-induced self-assembly of Cu(OH)₂ nanowires. The efficient encapsulation of Cu(OH)₂ in ZIF-L is obtained owing to the morphology fitting between the leaf-like Cu(OH)₂ and ZIF-L. CuCo-NC catalysts present superior electrocatalytic activity and stability toward ORR and OER over the commercial Pt/C and IrO₂, respectively, which are further used as bifunctional oxygen electrocatalysts in Zn–air batteries and exhibit impressive performance, with a high peak power density of 303.7 mW cm⁻², large specific capacity of up to 751.4 mAh g⁻¹ at 20 mA cm⁻², and a superior recharge stability.     

Redox-Reversible 2D Metal–Organic Framework Nanosheets (MONs) Based on the Hydroquinone/Quinone Couple

2D metal–organic nanosheets (MONs), akin to graphene, have aroused immense contemporary interest. In our quest to develop functional 2D MONs based on organic linkers designed de novo, we reasoned that benzene-tetrabenzoic acid, which has been exploited tremendously in the construction of pillared metal–organic frameworks (MOFs), could be maneuvered readily to access redox-active MONs based on the benzoquinone/hydroquinone redox couple. Herein, we show that the self-assembly of 2,3,5,6-tetrakis(p-carboxyphenyl)hydroquinone H₄BTA with Zn(NO₃)₂ does lead to 2D metal–organic nanosheets that stack down the y axis, affording a layered Zn MOF. Although the crystals of the latter do not exhibit a discernible chemically induced redox switching behavior, the 2D MONs accessed by ultrasound-induced liquid-phase exfoliation (UILPE) lend themselves to a facile redox switching behavior. Treatment of a dispersion of the 2D MONs in methanol with phenyliodine(III) diacetate (PIDA) results in the oxidation of the hydroquinone core to benzoquinone. Remarkably, the latter can be reverted to the former by treatment with ascorbic acid as a reducing agent; indeed, the redox process can be made out by the naked eye. The results constitute the first example of chemically induced redox switching of 2D MONs. In view of emergent applications of 2D materials in general and MONs in particular, for example, improvement of the performance of membranes in separations by doping with MONs, the redox-switchable property may lead to the development of unique materials with heretofore unexplored potential.