High‐Resolution Electrochemical Mapping of the Hydrogen Evolution Reaction on Transition‐Metal Dichalcogenide Nanosheets

High‐resolution scanning electrochemical cell microscopy (SECCM) is used to image and quantitatively analyze the hydrogen evolution reaction (HER) catalytically active sites of 1H‐MoS₂ nanosheets, MoS₂, and WS₂ heteronanosheets. Using a 20 nm radius nanopipette and hopping mode scanning, the resolution of SECCM was beyond the optical microscopy limit and visualized a small triangular MoS₂ nanosheet with a side length of ca. 130 nm. The electrochemical cell provides local cyclic voltammograms with a nanoscale spatial resolution for visualizing HER active sites as electrochemical images. The HER activity difference of edge, terrace, and heterojunction of MoS₂ and WS₂ were revealed. The SECCM imaging directly visualized the relationship of HER activity and number of MoS₂ nanosheet layers and unveiled the heterogeneous aging state of MoS₂ nanosheets. SECCM can be used for improving local HER activities by producing sulfur vacancies using electrochemical reaction at the selected region.     

Scanning electrochemical cell microscopy: High-resolution structure−property studies of mono- and polycrystalline electrode materials

Scanning electrochemical cell microscopy (SECCM) is a nanopipette-based scanning electrochemical probe microscopy technique that utilises a mobile droplet cell to measure and visualise electrode activity with high spatiotemporal resolution. This article spotlights the use of SECCM for studying the electrochemistry of crystalline electrode materials, ranging from well-defined monocrystals (e.g., transition metal dichalcogenides: MoS₂, WS₂ and WSe₂) to structurally/compositionally heterogeneous polycrystals (e.g., polycrystalline Pt, Au, Pd, Cu, Zn, low carbon steel, boron-doped diamond) and covering the diverse areas of (photo)electrocatalysis, corrosion science, surface science and electroanalysis. In particular, it is emphasised how nanoscale-resolved information from SECCM is readily related to electrode structure and properties, collected at a commensurate scale with complementary, co-located microscopy/spectroscopy techniques, to allow structure–property relationships to be assigned directly and unambiguously.     

Electrochemically exfoliated Ni-doped MoS2 nanosheets for highly efficient hydrogen evolution and Zn-H2O battery

Thanks to tunable physical and chemical properties, two-dimensional (2D) materials have received intensive interest, endowing their excellent electrocatalytic performances for applications in energy conversion. However, their catalytic activities are largely determined by poor adsorption energy and limited active edge sites. Herein, a one-step electrochemical exfoliation strategy was developed to fabricate 2D Ni-doped MoS₂ nanosheets (Ni-EX-MoS₂) with a lateral size of ～500 nm and thickness of ～3.5 nm. Profiting from high electrical conductivity and abundant exposing active sites, Ni-EX-MoS₂ catalyst displayed an admirable performance for electrochemical hydrogen evolution reaction (HER) with a low overpotential of 145 mV at 10 mA/cm² as well as a small Tafel slope of 89 mV/dec in alkaline media, which are superior to those of the most reported MoS₂-based electrocatalysts. The formed Ni species with tuning electronic structure played a crucial role as primary active center of Ni-EX-MoS₂, as well as the forming stable 1T/2H phase MoS₂ interface demonstrated a synergistic effect on electrocatalytic HER performance. Further, Ni-EX-MoS₂ was employed as a cathode electrode for alkaline Zn-H₂O battery, which displayed a high power density of 3.3 mW/cm² with excellent stability. This work will provide a simple and effective guideline for design of electrochemically exfoliated transition metal-doped MoS₂ nanosheets to inspire their practical applications in energy catalytic and storage.     

Vanadium‐Doped WS2 Nanosheets Grown on Carbon Cloth as a Highly Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Two‐dimensional transition‐metal dichalcogenides have been widely studied as electrocatalysts for the hydrogen evolution reaction (HER). However, limited active sites and poor conductivity hinder their application. To solve these disadvantages, heteroatom doping has attracted wide attention because it can not only increase the active sites but also affect the intrinsic catalytic properties of the electrocatalyst. Herein, we grew vanadium‐doped WS₂ nanosheets on carbon cloth (V‐WS₂/CC) as an electrocatalyst for HER under acidic and alkaline conditions. With a proper vanadium doping concentration, the electrochemical surface areas of V_0.065‐WS₂/CC were 9.6 and 2.6 times as large as that of pure WS₂ electrocatalyst under acidic and alkaline conditions, respectively. In addition, the charge‐transfer resistance also decreased with moderate vanadium doping. Based on this, the synthesized vanadium‐doped WS₂ nanosheets exhibited good stability with high HER catalytic activity and could reach a current density of 10 mA cm⁻² at overpotentials of 148 and 134 mV in 0.5 m H₂SO₄ and 1 m KOH, respectively. The corresponding Tafel slopes were 71 and 85 mV dec⁻¹. Therefore, our synthesized vanadium‐doped WS₂ nanosheets can be a promising electrocatalyst for the production of hydrogen over a wide pH range.     

Electrochemical sulfidation of WS2 nanoarrays: Strong dependence of hydrogen evolution activity on transition metal sulfide surface composition

The activity of transition metal sulfides for the hydrogen evolution reaction (HER) can be increased by sulfur-enrichment of active metal-sulfide sites. In this report, we investigate the electrochemical sulfidation of atmospherically aged WS₂ nanoarrays with respect to enhancing HER activity. In contrast to MoS₂, it is found that sulfidation diminishes HER activity. Electrochemical and XPS experiments suggest the involvement of insoluble tungsten oxides in the altered HER and electron transfer properties. This demonstrates the strong dependence of the transition metal dichalcogenide (TMD) composition with the successful sulfur incorporation and subsequent HER activity.     

WS<Subscript>2</Subscript> grafted on silicon and nano-silicon particles etched: a high-performance electrocatalyst for hydrogen evolution reaction

Most of research has been carried out for the development of electrocatalysts for hydrogen evolution reaction (HER), which are high activity and low cost. In this study, a practical, usable, highly active, cheap, and none noble metal catalyst was developed for HER. To this end, tungsten disulfide supported on silicon (WS₂/Si) and on silicon nanoparticles (WS₂/nano-Si) were prepared. To increase the catalytic activity of WS₂/nano-Si, chemical etching was used to prepare WS₂/nano-Si etched. The synthesized electrocatalysts were characterized using Fortier transform infrared spectroscopy, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction methods. To evaluate the electrochemical attributes of WS₂/Si and WS₂/n-Si before and after chemical etching, electrochemical impedance spectroscopy, linear sweep, and cyclic voltammetry were used. The electrochemical measurements indicated an intense activity of the WS₂/nano-Si/etched, through a high density of the current and low overpotential for HER, with a small overpotential of 0.14 V, Tafel slopes as small as 45 mV dec^?1, and large cathodic currents. These results show that through etching process of silicon in HF the quantities of the active sites have been changed and increased considerably.     

Bifunctional Electrocatalyst with 0D/2D Heterostructure for Highly Efficient Hydrogen and Oxygen Generation

A novel MoS₂ quantum dots/CoSe₂ nanosheet (MoS₂ QDs/CoSe₂) hybrid with 0D/2D heterostructure has been developed. The CoSe₂ nanosheets (NSs) enable an excellent oxygen evolution reaction (OER) activity with increasing vacancy configuration on one hand, while the MoS₂ QDs serve as an eminent hydrogen evolution reaction (HER) catalyst on the other. By integrating MoS₂ QDs and CoSe₂ NSs, the hybrid exhibits excellent electrocatalytic performances in HER and OER. The unique 0D/2D hetero‐interface increases the exposed active sites and facilitates electron transfer, thereby boosting the electrocatalytic activity. Relatively low overpotentials of 82 mV and 280 mV are required to drive the current density of 10 mA/cm² for HER and OER, with corresponding Tafel slopes of 69 and 75 mV/dec, respectively. As such, this work provides an efficient yet simple approach to construct bifunctional electrocatalysts with enhanced activity and stability.     

Strain tuned efficient heterostructure photoelectrodes

van der Waals（vd Ws） heterostructures based on two-dimensional（2D） materials have become a promising candidate for photoelectrochemical（PEC） catalyst not only because of the freedom in materials design that enable the band-offset construction and facilitate the charge separation. They also provide a platform for the study of various of interface effect in PEC. Here, we report a new kind of mixed-dimensional vd Ws heterostructure photoelectrode and investigate the strain enhanced PEC performance ...     

Ultrathin WS2 Nanoflakes as a High‐Performance Electrocatalyst for the Hydrogen Evolution Reaction

Much has been done to search for highly efficient and inexpensive electrocatalysts for the hydrogen evolution reaction (HER), which is critical to a range of electrochemical and photoelectrochemical processes. A new, high‐temperature solution‐phase method for the synthesis of ultrathin WS₂ nanoflakes is now reported. The resulting product possesses monolayer thickness with dimensions in the nanometer range and abundant edges. These favorable structural features render the WS₂ nanoflakes highly active and durable catalysts for the HER in acids. The catalyst exhibits a small HER overpotential of approximately 100 mV and a Tafel slope of 48 mV/decade. These ultrathin WS₂ nanoflakes represent an attractive alternative to the precious platinum benchmark catalyst and rival MoS₂ materials that have recently been heavily scrutinized for the electrocatalytic HER.     

One‐pot Synthesis of CdS Nanocrystals Hybridized with Single‐Layer Transition‐Metal Dichalcogenide Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Exploration of low‐cost and earth‐abundant photocatalysts for highly efficient solar photocatalytic water splitting is of great importance. Although transition‐metal dichalcogenides (TMDs) showed outstanding performance as co‐catalysts for the hydrogen evolution reaction (HER), designing TMD‐hybridized photocatalysts with abundant active sites for the HER still remains challenge. Here, a facile one‐pot wet‐chemical method is developed to prepare MS₂–CdS (M=W or Mo) nanohybrids. Surprisedly, in the obtained nanohybrids, single‐layer MS₂ nanosheets with lateral size of 4–10 nm selectively grow on the Cd‐rich (0001) surface of wurtzite CdS nanocrystals. These MS₂–CdS nanohybrids possess a large number of edge sites in the MS₂ layers, which are active sites for the HER. The photocatalytic performances of WS₂–CdS and MoS₂–CdS nanohybrids towards the HER under visible light irradiation (>420 nm) are about 16 and 12 times that of pure CdS, respectively. Importantly, the MS₂–CdS nanohybrids showed enhanced stability after a long‐time test (16 h), and 70 % of catalytic activity still remained.     

Composite electrocatalyst Mo<Subscript>x</Subscript>W<Subscript>1-x</Subscript>S<Subscript>2</Subscript> nanosheets on carbon fiber paper for highly efficient hydrogen evolution reaction

Molybdenum disulfide (MoS₂) or tungsten disulfide (WS₂), as a promising catalyst, is widely investigated for hydrogen evolution reaction (HER). In this work, a composite electrocatalysts Mo_xW_1-xS₂ is successfully decorated on carbon fiber paper (CFP) through a facile hydrothermal method. The three-dimensional porous CFP can enable the diffusion and penetration of electrolyte. Comparing with MoS₂ and WS₂ catalyst, the composite electrocatalyst Mo_xW_1-xS₂ nanosheets can expose the large number of electrochemically active sites. Hence, the as-prepared Mo_xW_1-xS₂/CFP (3:1) exhibit the outstanding HER catalytic activity with the small Tafel slope of 68 mV dec^?1 and the low overpotential of ??178.4?±?0.5 mV at a current density of 10 mA cm^?2. Chronoamperometric current test for 18 h confirm the long-term stability of the composite electrocatalyst.     

磷掺杂缺陷WS2纳米片诱导的高效析氢性能

通过超声剥离法制备二硫化钨(WS₂)纳米片,将纳米片和红磷(P)混合,用氩气(Ar)等离子体对混合物进行处理,制备了P掺杂缺陷WS₂纳米片。对制备的材料进行电催化析氢反应(hydrogen evolution reaction,HER)测试,结果表明P掺杂的缺陷WS₂纳米片相对于缺陷WS₂纳米片和WS₂纳米片表现出优越的HER催化活性(较小的过电位和Tafel斜率、优异的稳定性)。密度泛函理论计算结果表明,在WS₂结构中P原子和缺陷结构改善了其电子结构,使其具有更加合适的H⁺吸附能垒和H₂生成动力学性能,从而提高催化活性。     

磷掺杂缺陷WS2纳米片诱导的高效析氢性能

通过超声剥离法制备二硫化钨(WS₂)纳米片,将纳米片和红磷(P)混合,用氩气(Ar)等离子体对混合物进行处理,制备了P掺杂缺陷WS₂纳米片。对制备的材料进行电催化析氢(hydrogen evolution reaction,HER)测试,结果表明P掺杂的缺陷WS₂纳米片相对于缺陷WS₂纳米片和WS₂纳米片表现出优越的HER催化活性(较小的过电位和Tafel斜率,优异的稳定性)。密度泛函理论计算结果表明,在WS₂结构中P原子和缺陷结构改善了其电子结构,使其具有更加合适的H⁺吸附能垒和H₂生成动力学性能,从而提高催化活性。     

Local Surface Structure and Composition Control the Hydrogen Evolution Reaction on Iron Nickel Sulfides

In order to design more powerful electrocatalysts, developing our understanding of the role of the surface structure and composition of widely abundant bulk materials is crucial. This is particularly true in the search for alternative hydrogen evolution reaction (HER) catalysts to replace platinum. We report scanning electrochemical cell microscopy (SECCM) measurements of the (111)‐crystal planes of Fe_4.5Ni_4.5S₈, a highly active HER catalyst. In combination with structural characterization methods, we show that this technique can reveal differences in activity arising from even the slightest compositional changes. By probing electrochemical properties at the nanoscale, in conjunction with complementary structural information, novel design principles are revealed for application to rational material synthesis.     

Enhancement of electrochemical and catalytic properties of MoS2 through ball-milling

MoS₂ nanosheets of one to few layer thickness present novel electronic and enhanced catalytic properties with respect to the bulk material. Here we show that a simple and highly scalable ball-milling procedure can lead to significant improvements of the electrochemical and catalytic properties of the bulk natural MoS₂. We characterized the material before and after the milling process by means of scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy in order to evaluate morphological and chemical features. We investigated the electrochemical properties by means of voltammetry techniques to monitor the electron transfer with [Fe(CN)₆]^{4 −/3 −} redox probe and the catalytic properties by monitoring the electrochemical hydrogen evolution reaction (HER). A significant overpotential lowering of about 210 mV is obtained for the HER by the ball-milled material when compared to bulk materials. This has a huge potential for the lowering of the energy consumption during hydrogen evolution. Ball-milling offers highly scalable dry method for large scale production of electrocatalyst with enhanced properties.     

Tuning the Intrinsic Activity and Electrochemical Surface Area of MoS2 via Tiny Zn Doping: Toward an Efficient Hydrogen Evolution Reaction (HER) Catalyst

Molybdenum sulfide (MoS₂) is considered as an alternative material for commercial platinum catalysts for electrocatalytic hydrogen evolution reaction (HER). Improving the apparent HER activity of MoS₂ to a level comparable to that of Pt is an essential premise for the commercial use of MoS₂. In this work, a Zn-doping strategy is proposed to enhance the HER performance of MoS₂. It is shown that tiny Zn doping into MoS₂ leads to the enhancement of the electrochemical surface area, increases in proportion of HER active 1T phase in the material and formation of catalytic sites of higher intrinsic activity. These benefits result in a high-performance HER electrocatalyst with a low overpotential of 190 mV(@10 mA cm⁻²) and a low Tafel slope of 58 mV dec⁻¹. The origin for the excellent electrochemical performance of the doped MoS₂ is rationalized with both experimental and theoretical investigations.     

Gold Nanoclusters Grown on MoS2 Nanosheets by Pulsed Laser Deposition: An Enhanced Hydrogen Evolution Reaction

Au nanoparticles were decorated on a 2H MoS₂ surface to form an Au/MoS₂ composite by pulse laser deposition. Improved HER activity of Au/MoS₂ is evidenced by a positively shifted overpotential (−77 mV) at a current density of −10 mA cm⁻² compared with pure MoS₂ nanosheets. Experimental evidence shows that the interface between Au and MoS₂ provides more sites to combine protons to form an active H atom. The density functional theory calculations found that new Au active sites on the Au and MoS₂ interface with improved conductivity of the whole system are essential for enhancing HER activity of Au/MoS₂.     

Heterostructures of NiFe LDH hierarchically assembled on MoS2 nanosheets as high-efficiency electrocatalysts for overall water splitting

Typically, rational interfacial engineering can effectively modify the adsorption energy of active hydrogen molecules to improve water splitting efficiency. NiFe layered double hydroxide (NiFe LDH) composite, an efficient oxygen evolution reaction (OER) catalyst, suffers from slow hydrogen evolution reaction (HER) kinetics, restricting its application for overall water splitting. Herein, we construct the hierarchical MoS₂/NiFe LDH nanosheets with a heterogeneous interface used for HER and OER. Benefiting the hierarchical heterogeneous interface optimized hydrogen Gibbs free energy, tens of exposed active sites, rapid mass- and charge-transfer processes, the MoS₂/NiFe LDH displays a highly efficient synergistic electrocatalytic effect. The MoS₂/NiFe LDH electrode in 1 mol/L KOH exhibits excellent HER activity, only 98 mV overpotential at 10 mA/cm². Significantly, when it assembled as anode and cathode for overall water splitting, only 1.61 V cell voltage was required to achieve 10 mA/cm² with excellent durability (50 h).     

Ultrathin MoS2 Nanosheets Supported on N‐doped Carbon Nanoboxes with Enhanced Lithium Storage and Electrocatalytic Properties

Molybdenum disulfide (MoS₂) has received considerable interest for electrochemical energy storage and conversion. In this work, we have designed and synthesized a unique hybrid hollow structure by growing ultrathin MoS₂ nanosheets on N‐doped carbon shells (denoted as C@MoS₂ nanoboxes). The N‐doped carbon shells can greatly improve the conductivity of the hybrid structure and effectively prevent the aggregation of MoS₂ nanosheets. The ultrathin MoS₂ nanosheets could provide more active sites for electrochemical reactions. When evaluated as an anode material for lithium‐ion batteries, these C@MoS₂ nanoboxes show high specific capacity of around 1000 mAh g^?1, excellent cycling stability up to 200 cycles, and superior rate performance. Moreover, they also show enhanced electrocatalytic activity for the electrochemical hydrogen evolution.     

MoS2 Nanosheets Supported on 3D Graphene Aerogel as a Highly Efficient Catalyst for Hydrogen Evolution

The development of efficient catalysts for electrochemical hydrogen evolution is essential for energy conversion technologies. Molybdenum disulfide (MoS₂) has emerged as a promising electrocatalyst for hydrogen evolution reaction, and its performance greatly depends on its exposed edge sites and conductivity. Layered MoS₂ nanosheets supported on a 3D graphene aerogel network (GA‐MoS₂) exhibit significant catalytic activity in hydrogen evolution. The GA‐MoS₂ composite displays a unique 3D architecture with large active surface areas, leading to high catalytic performance with low overpotential, high current density, and good stability.