Theoretical evidence of PtSn alloy efficiency for CO oxidation

The efficiency of PtSn alloy surfaces toward CO oxidation is demonstrated from first-principles theory. Oxidation kinetics based on atomistic density-functional theory calculations shows that the Pt3Sn surface alloy exhibits a promising catalytic activity for fuel cells. At room temperature, the corresponding rate outstrips the activity of Pt(111) by several orders of magnitude. According to the oxidation pathways, the activation barriers are actually lower on Pt3Sn(111) and Pt3Sn/Pt(111) surfaces than on Pt(111). A generalization of Hammer's model is proposed to elucidate the key role of tin on the lowering of the barriers. Among the energy contributions, a correlation is evidenced between the decrease of the barrier and the strengthening of the attractive interaction energy between CO and O moieties. The presence of tin modifies also the symmetry of the transition states which are composed of a CO adsorbate on a Pt near-top position and an atomic O adsorption on an asymmetric mixed PtSn bridge site. Along the reaction pathways, a CO2 chemisorbed surface intermediate is obtained on all the surfaces. These results are supported by a thorough vibrational analysis including the coupling with the surface phonons which reveals the existence of a stretching frequency between the metal substrate and the CO2 molecule.     

Pt（111）和Pt3Ni（111）表面上CO催化氧化反应的密度泛函理论研究

采用密度泛函理论,对Pt(111)和Pt3Ni(111)表面上CO和O的单独吸附、共吸附以及CO的氧化反应进行了系统的研究. 结果表明, Pt3Ni(111)表面上CO的吸附弱于Pt(111)表面, O的吸附明显强于Pt(111)表面. 两个表面表现出相似的CO催化氧化活性. 表面Ni的存在不但稳定了O的吸附,同时也降低了过渡态O的能量.     

Effects of the surface mobility on the oxidation of adsorbed CO on platinum electrodes in alkaline media. The role of the adlayer and surface defects

The oxidation of adsorbed CO on Pt single crystal electrodes has been studied in alkaline media. The surfaces used in this study were the Pt(111) electrode and vicinal stepped and kinked surfaces with (111) terraces. The kinked surfaces have either (110) steps broken by (100) kinks or (100) steps broken by (110) kinks and different kink densities. The voltammetric profiles for the CO stripping on those electrodes show peaks corresponding to the oxidation of CO on the (111) terraces, on the (100) steps/kinks and on the (110) steps/kinks at very distinctive potentials. Additionally, the stripping voltammograms always present a prewave. The analysis of the results with the different stepped and kinked surfaces indicates that the presence of the prewave is not associated with defects or kinks in the electrode surface. Also, the clear separation of the CO stripping process in different peak contributions indicates that the mobility of CO on the surface is very low. Using partial CO stripping experiments and studies at different pH, it has been proposed that the low mobility is a consequence of the negative absolute potential at which the adlayers are formed in alkaline media. Also, the surface diffusion coefficient for CO in these media has been estimated from the dependence of the stripping charge of the peaks with the scan rate of the voltammetry.     

A first-principles investigation of the effect of Pt cluster size on CO and NO oxidation intermediates and energetics

As catalysis research strives toward designing structurally and functionally well-defined catalytic centers containing as few active metal atoms as possible, the importance of understanding the reactivity of small metal clusters, and in particular of systematic comparisons of reaction types and cluster sizes, has grown concomitantly. Here we report density functional theory calculations (GGA-PW91) that probe the relationship between particle size, intermediate structures, and energetics of CO and NO oxidation by molecular and atomic oxygen on Pt(x) clusters (x = 1-5 and 10). The preferred structures, charge distributions, vibrational spectra, and energetics are systematically examined for oxygen (O(2), 2O, and O), CO, CO(2), NO, and NO(2), for CO/NO co-adsorbed with O(2), 2O, and O, and for CO(2)/NO(2) co-adsorbed with O. The binding energies of oxygen, CO, NO, and of the oxidation products CO(2) and NO(2) are all markedly enhanced on Pt(x) compared to Pt(111), and they trend toward the Pt(111) levels as cluster size increases. Because of the strong interaction of both the reactants and products with the Pt(x) clusters, deep energy sinks develop on the potential energy surfaces of the respective oxidation processes, indicating worse reaction energetics than on Pt(111). Thus the smallest Pt clusters are less effective for catalyzing CO and NO oxidation in their original state than bulk Pt. Our results further suggests that oxidation by molecular O(2) is thermodynamically more favourable than by atomic O on Pt(x). Conditions and applications in which the Pt(x) clusters may be effective catalysts are discussed.     

Catalytic oxidation activity of Pt3O4 surfaces and thin films

The catalytic oxidation activity of platinum particles in automobile catalysts is thought to originate from the presence of highly reactive superficial oxide phases which form under oxygen-rich reaction conditions. Here we study the thermodynamic stability of platinum oxide surfaces and thin films and their reactivities toward oxidation of carbon compounds by means of first-principles atomistic thermodynamics calculations and molecular dynamics simulations based on density functional theory. On the Pt(111) surface the most stable superficial oxide phase is found to be a thin layer of alpha-PtO2, which appears not to be reactive toward either methane dissociation or carbon monoxide oxidation. A PtO-like structure is most stable on the Pt(100) surface at oxygen coverages of one monolayer, while the formation of a coherent and stress-free Pt3O4 film is favored at higher coverages. Bulk Pt3O4 is found to be thermodynamically stable in a region around 900 K at atmospheric pressure. The computed net driving force for the dissociation of methane on the Pt3O4(100) surface is much larger than that on all other metallic and oxide surfaces investigated. Moreover, the enthalpy barrier for the adsorption of CO molecules on oxygen atoms of this surface is as low as 0.34 eV, and desorption of CO2 is observed to occur without any appreciable energy barrier in molecular dynamics simulations. These results, combined, indicate a high catalytic oxidation activity of Pt3O4 phases that can be relevant in the contexts of Pt-based automobile catalysts and gas sensors.     

Synergetic effect of surface and subsurface Ni species at Pt-Ni bimetallic catalysts for CO oxidation

Various well-defined Ni-Pt(111) model catalysts are constructed at atomic-level precision under ultra-high-vacuum conditions and characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. Subsequent studies of CO oxidation over the surfaces show that a sandwich surface (NiO(1-x)/Pt/Ni/Pt(111)) consisting of both surface Ni oxide nanoislands and subsurface Ni atoms at a Pt(111) surface presents the highest reactivity. A similar sandwich structure has been obtained in supported Pt-Ni nanoparticles via activation in H(2) at an intermediate temperature and established by techniques including acid leaching, inductively coupled plasma, and X-ray adsorption near-edge structure. Among the supported Pt-Ni catalysts studied, the sandwich bimetallic catalysts demonstrate the highest activity to CO oxidation, where 100% CO conversion occurs near room temperature. Both surface science studies of model catalysts and catalytic reaction experiments on supported catalysts illustrate the synergetic effect of the surface and subsurface Ni species on the CO oxidation, in which the surface Ni oxide nanoislands activate O(2), producing atomic O species, while the subsurface Ni atoms further enhance the elementary reaction of CO oxidation with O.     

Dynamics of CO at the solid/liquid interface studied by modeling and simulation of CO electro-oxidation on Pt and PtRu electrodes

We consider theoretical models for CO monolayer oxidation on stepped Pt single-crystal electrodes and Ru-modified Pt(111) electrodes. For both systems, our aim is to assess the importance of CO surface diffusion in reproducing the experimental chronoamperometry or voltammetry. By comparing the simulations with the experimental chronoamperometric transients for CO oxidation on a series of stepped Pt surfaces, it was concluded that mixing of CO on the Pt(111) terrace is good, implying rapid diffusion (N. P. Lebedeva, M. T. M. Koper, J. M. Feliu and R. A. van Santen, J. Phys. Chem. B, submitted). We discuss here a more detailed model in which the CO adsorbed on steps is converted into CO adsorbed on terraces as the oxygen-containing species occupy the steps (as observed experimentally on stepped Pt in UHV), followed by a subsequent oxidation of the latter, to reproduce the observed chronoamperometry on stepped surfaces with a higher step density. On Ru-modified Pt(111), the experimentally observed splitting of the CO stripping voltammetry into two stripping peaks, may suggest a slow diffusion of CO on Pt(111). This apparent contradiction with the conclusions of the experiments on stepped surfaces, is resolved by assuming a weaker CO binding to a Pt atom which has Ru neighbors than to "bulk" Pt(111), in agreement with recent quantum-chemical calculations. This makes the effective diffusion from the uncovered Pt(111) surface to the perimeter of the Ru islands, which are considered to be the active sites in CO oxidation electrocatalysis on PtRu surfaces, very slow. Different models for the reaction are considered, and discussed in terms of their ability to explain experimental observations.     

Dynamics of surface catalyzed reactions; the roles of surface defects, surface diffusion, and hot electrons

The mechanism that controls bond breaking at transition metal surfaces has been studied with sum frequency generation (SFG), scanning tunneling microscopy (STM), and catalytic nanodiodes operating under the high-pressure conditions. The combination of these techniques permits us to understand the role of surface defects, surface diffusion, and hot electrons in dynamics of surface catalyzed reactions. Sum frequency generation vibrational spectroscopy and kinetic measurements were performed under 1.5 Torr of cyclohexene hydrogenation/dehydrogenation in the presence and absence of H(2) and over the temperature range 300-500 K on the Pt(100) and Pt(111) surfaces. The structure specificity of the Pt(100) and Pt(111) surfaces is exhibited by the surface species present during reaction. On Pt(100), pi-allyl c-C6H9, cyclohexyl (C6H11), and 1,4-cyclohexadiene are identified adsorbates, while on the Pt(111) surface, pi-allyl c-C6H9, 1,4-cyclohexadiene, and 1,3-cyclohexadiene are present. A scanning tunneling microscope that can be operated at high pressures and temperatures was used to study the Pt(111) surface during the catalytic hydrogenation/dehydrogenation of cyclohexene and its poisoning with CO. It was found that catalytically active surfaces were always disordered, while ordered surface were always catalytically deactivated. Only in the case of the CO poisoning at 350 K was a surface with a mobile adsorbed monolayer not catalytically active. From these results, a CO-dominated mobile overlayer that prevents reactant adsorption was proposed. By using the catalytic nanodiode, we detected the continuous flow of hot electron currents that is induced by the exothermic catalytic reaction. During the platinum-catalyzed oxidation of carbon monoxide, we monitored the flow of hot electrons over several hours using a metal-semiconductor Schottky diode composed of Pt and TiO2. The thickness of the Pt film used as the catalyst was 5 nm, less than the electron mean free path, resulting in the ballistic transport of hot electrons through the metal. The electron flow was detected as a chemicurrent if the excess electron kinetic energy generated by the exothermic reaction was larger than the effective Schottky barrier formed at the metal-semiconductor interface. The measurement of continuous chemicurrent indicated that chemical energy of exothermic catalytic reaction was directly converted into hot electron flux in the catalytic nanodiode. We found the chemicurrent was well-correlated with the turnover rate of CO oxidation separately measured by gas chromatography.     

Role of Bi promotion and solvent in platinum-catalyzed alcohol oxidation probed by in situ X-ray absorption and ATR-IR spectroscopy

Modification of 5 wt% Pt/Al(2)O(3) by Bi (0.9 wt%) affords a drastic improvement of catalytic activity in the liquid phase aerobic oxidation of benzyl alcohol. The nature of the solvent employed, cyclohexane or toluene, seems to influence the catalytic activity as well. We have investigated the catalysts under working conditions using in situ X-ray absorption spectroscopy (XAS) and attenuated total reflection infrared spectroscopy (ATR-IR), aiming at uncovering the roles of the metal promoter and the reaction medium. XAS confirms that Bi is oxidized more easily than Pt, maintaining the catalytic activity of the metallic Pt sites for a longer period of time. Interestingly, toluene contrary to cyclohexane reduced Pt to a large extent. The freshly reduced noble metal sites seem to directly interact with the solvent, inducing an immediate poisoning of the material and limiting its performance. This behaviour is not observed in the presence of Bi, whose geometric effect (site blocking) is interpreted as additionally limiting the adsorption of toluene and the premature deactivation of Pt. ATR-IR spectroscopy during CO adsorption on Pt and during reaction indicates that Bi is located rather on extended surfaces than on step or kink sites. Side products, CO and benzoate species, appearing during the reaction reveal that the geometric suppression of undesired reactions does not occur to the same extent on Pt-based catalysts as on Pd, suggesting that decarbonylation of the produced aldehyde on Pt may occur also on sites other than the (111) terraces.     

Co-adsorption of CO onto a Ag-modified Pt(111)--restructuring of a Ag UPD layer monitored by EC-STM

The effect of co-adsorption of CO on an underpotentially deposited (UPD) silver monolayer on a Pt(111) single crystal electrode in 0.05 M sulfuric acid is investigated for the first time by means of electrochemical scanning tunneling microscopy (EC-STM). Pure electrochemical experiments suggest that the co-adsorption of CO onto Pt single crystal electrodes previously modified by a monolayer of Ag, forces Ag atoms of the first UPD monolayer into a second adlayer. The present EC-STM studies reveal the formation of a large-area Ag network after the co-adsorption of CO. The resulting Ag nanostructures formed on wide Pt(111) terraces are approximately 0.5 nm high and 10 nm wide. The desorption of the newly formed second Ag adlayer, the oxidation of CO and the desorption of Ag atoms from the first adlayer are monitored by EC-STM and simultaneously detected in the corresponding CVs in three different oxidation peaks. EC-STM images recorded afterwards show the unchanged Pt surface. The presence of Ag on the surface leads to a downward shift of the onset of oxygen adsorption on the Pt(111) surface.     

Heterogeneous catalysis on the atomic scale

Information about the elementary processes underlying heterogeneous catalysis may be obtained by investigating well-defined single crystal surfaces. The success of this "surface science" approach for "'real" catalysis can be demonstrated, for example, with ammonia synthesis. The progress of catalytic reactions can be observed on an atomic scale by applying scanning tunneling microscopy and other surface physical techniques, as is shown with different examples in this paper: CO oxidation on a Pt(111) surface proceeds preferentially along the boundaries between adsorbed O and CO patches. Ru is practically inactive for the same reaction under lower pressure conditions but is transformed into RuO2 under atmospheric pressure conditions, where part of the surface Ru atoms function as coordinatively unsaturated sites (cus). In contrast, in the hydrogen oxidation reaction on Pt(111), an autocatalytic reaction step comes into prominence, and is responsible for the formation of propagating concentration patterns on the surface as a characteristic of nonlinear dynamics. Additionally, the limits of the concept of thermal equilibrium in surface rate processes are explored by applying ultrafast (femtosecond) laser techniques.     

IR chemiluminescence probe of the vibrational energy distribution of CO2 formed during steady-state CO oxidation on Pt(111) and Pt(110) surfaces

The infrared (IR) chemiluminescence spectra of CO2 were measured during the steady-state CO + O2 reaction over Pt(110) and Pt(111) surfaces. Analysis of the IR emission spectra indicates that the bending vibrational temperature (TVB), as well as the antisymmetric vibrational temperature (TVAS), was higher on Pt(110) than on Pt(111). On the Pt(110) surface, the highly excited bending vibrational mode compared to the antisymmetric vibrational mode was observed under reaction conditions at low CO coverage (theta(CO) < 0.2) or at high surface temperatures (TS > or = 700 K). This can be related to the activated complex of CO2 formation in a more bent form on the inclined (111) terraces of the Pt(110)(1 x 2) structure. On the other hand, at high CO coverage (theta(CO) > 0.2) or at low surface temperatures (TS < 650 K), TVAS was higher than TVB, which can be caused by the reconstruction of the Pt(110)(1 x 2) surface to the (1 x 1) form with high CO coverage.     

Comprehensive mechanism and structure-sensitivity of ethanol oxidation on platinum: new transition-state searching method for resolving the complex reaction network

Ethanol oxidation on Pt is a typical multistep and multiselectivity heterogeneous catalytic process. A comprehensive understanding of this fundamental reaction would greatly benefit design of catalysts for use in direct ethanol fuel cells and the degradation of biomass-derived oxygenates. In this work, the reaction network of ethanol oxidation on different Pt surfaces, including close-packed Pt{111}, stepped Pt{211}, and open Pt{100}, is explored thoroughly with an efficient reaction path searching method, which integrates our new transition-state searching technique with periodic density functional theory calculations. Our new technique enables the location of the transition state and saddle points for most surface reactions simply and efficiently by optimization of local minima. We show that the selectivity of ethanol oxidation on Pt depends markedly on the surface structure, which can be attributed to the structure-sensitivity of two key reaction steps: (i) the initial dehydrogenation of ethanol and (ii) the oxidation of acetyl (CH3CO). On open surface sites, ethanol prefers C-C bond cleavage via strongly adsorbed intermediates (CH2CO or CHCO), which leads to complete oxidation to CO2. However, only partial oxidizations to CH3CHO and CH3COOH occur on Pt{111}. Our mechanism points out that the open surface Pt{100} is the best facet to fully oxidize ethanol at low coverages, which sheds light on the origin of the remarkable catalytic performance of Pt tetrahexahedra nanocrystals found recently. The physical origin of the structure-selectivity is rationalized in terms of both thermodynamics and kinetics. Two fundamental quantities that dictate the selectivity of ethanol oxidation are identified: (i) the ability of surface metal atoms to bond with unsaturated C-containing fragments and (ii) the relative stability of hydroxyl at surface atop sites with respect to other sites.     

Relationships between the activities and Ce~(3+) concentrations of CeO_2(111) for CO oxidation:A first-principle investigation

CO oxidation at ceria surfaces has been studied for decades,and many efforts have been devoted to understanding the effect of surface reduction on the catalytic activity.In this work,we theoretically studied the CO oxidation on the clean and reduced CeO_2(111) surfaces using different surface cells to dete rmine the relationships between the reduction degrees and calculated reaction energetics.It is found that the calculated barrier for the direct reaction between CO and surface lattice O drastically decreases with the increase of surface reduction degree.From electronic analysis,we found that the surface reduction can lead to the occurrence of localized electrons at the surface Ce,which affects the charge distribution at surface O.As the result,the surface O becomes more negatively charged and therefore more active in reacting with CO.This work then suggests that the localized 4 f electron reservoir of Ce can act as the "pseudo-anion" at reduced CeO_2 surfaces to activate surface lattice O for catalytic oxidative reactions.     

A Theoretical Study on Electronic Transition of CO Adsorption on Platinum Pt(111) Surface

It is now technically possible for Raman spectroscopy to investigate in detail the catalytic reaction on the transition metal surfaces. However, there are only few theoretical papers reported on the contribution of the electronic excited states to the spectroscopic properties. During the interaction of the visible light with the transition metal surface, there exist a number of low-lying excited states due to the unfilled d orbital Nakai and Nakatsuji studied theoretically adsorbed CO on the Pt₂ cluster to simulate CO adsorbed on plartinum surfaces.¹ However it is known that the cluster with only two platinum atoms is insufficient to simulate CO adsorbed at surface. It is suggested in literature that a good simulated result generally needs to adopt a cluster with more than seven atoms. In this paper, we use a duster with 8 platinum atoms in the surface layer, which has been used by Kua and Goddard to mimic the oxidation of methanol on the Pt(111) surface.² Based on the interstitial electron model, they found that the cluster is the smallest and the best cluster possible to be used to mimic Pt(111) surface.     

Mechanism of CO oxidation on Pt(111) in alkaline media

Electrochemical techniques, coupled with in situ scanning tunneling microscopy, have been used to examine the mechanism of CO oxidation and the role of surface structure in promoting CO oxidation on well-ordered and disordered Pt(111) in aqueous NaOH solutions. Oxidation of CO occurs in two distinct potential regions: the prepeak (0.25-0.70 V) and the main peak (0.70 V and higher). The mechanism of reaction is Langmuir-Hinshelwood in both regions, but the OH adsorption site is different. In the prepeak, CO oxidation occurs through reaction with OH that is strongly adsorbed at defect sites. Adsorption of OH on defects at low potentials has been verified using charge displacement measurements. Not all CO can be oxidized in the prepeak, since the Pt-CO bond strength increases as the CO coverage decreases. Below theta(CO) = 0.2 monolayer, CO is too strongly bound to react with defect-bound OH. Oxidation of CO at low coverage occurs in the main peak through reaction with OH adsorbed on (111) terraces, where the Pt-OH bond is weaker than on defects. The enhanced oxidation of CO in alkaline media is attributed to the higher affinity of the Pt(111) surface for adsorption of OH at low potentials in alkaline media as compared with acidic media.     

A first principles study of oxygen reduction reaction on a Pt(111) surface modified by a subsurface transition metal M (M = Ni, Co, or Fe)

We have performed first-principle density functional theory calculations to investigate how a subsurface transition metal M (M = Ni, Co, or Fe) affects the energetics and mechanisms of oxygen reduction reaction (ORR) on the outermost Pt mono-surface layer of Pt/M(111) surfaces. In this work, we found that the subsurface Ni, Co, and Fe could down-shift the d-band center of the Pt surface layer and thus weaken the binding of chemical species to the Pt/M(111) surface. Moreover, the subsurface Ni, Co, and Fe could modify the heat of reaction and activation energy of various elementary reactions of ORR on these Pt/M(111) surfaces. Our DFT results revealed that, due to the influence of the subsurface Ni, Co, and Fe, ORR would adopt a hydrogen peroxide dissociation mechanism with an activation energy of 0.15 eV on Pt/Ni(111), 0.17 eV on Pt/Co(111), and 0.16 eV on Pt/Fe(111) surface, respectively, for their rate-determining O2 protonation reaction. In contrast, ORR would follow a peroxyl dissociation mechanism on a pure Pt(111) surface with an activation energy of 0.79 eV for its rate-determining O protonation reaction. Thus, our theoretical study explained why the subsurface Ni, Co, and Fe could lead to multi-fold enhancement in catalytic activity for ORR on the Pt mono-surface layer of Pt/M(111) surfaces.     

Oscillatory reactions on single crystal surfaces

Heterogeneous catalytic reactions exhibit under certain conditions kinetic oscillations which have been investigated both with polycrystalline materials and with single crystal surfaces as catalysts. The present paper reviews single-crystal experiments conducted under isothermal, low pressure conditions (p < 10^-3 mbar). Two different reaction systems have been investigated: catalytic CO oxidation on various Pt and Pd orientations and catalytic NO reduction on Pt(100) using CO, H₂, or NH₃ as the reducing agent. The different reaction systems exhibit a wide variety of interesting phenomena which are well-known in nonlinear dynamics, for example, such as spatiotemporal pattern formation, the existence of Turing structures and the appearance of deterministic chaos, and chemical turbulence. The mechanistic steps leading to the observed phenomena have been investigated and appropriate mathematical models have been formulated and analyzed using bifurcation theory. The driving force for the rate oscillations has been shown to result from structural changes of the substrate in the case of catalytic CO oxidation on Pt surfaces, subsurface oxygen formation in the case of catalytic CO oxidation on Pd surfaces, and in the chemical reaction network described by a vacancy model in the case of the NO reduction reactions.     

CO oxidation on Pt nanoclusters, size and coverage effects: a density functional theory study

CO oxidation on Pt nanoclusters of approximately 1 nm in size was studied using density functional theory (DFT). Reaction barriers on various sites of a cuboctahedral 55-atom cluster and of several two-layer plane clusters representing (111) and (100) facets of the 147-atom cluster have been calculated at various coverage. The effect of atomic structure of various clusters was discussed. It was concluded that the 147-atom cuboctahedral cluster reveals properties of the Pt single crystal surfaces, while a 55-atom cluster cannot be fully described in terms of Pt single crystal surfaces. It was found that CO oxidation may occur faster at higher coverage and that for cluster sizes up to a few nanometers in size, larger platinum clusters can be more efficient in CO oxidation than the smaller clusters. The size effect was found to depend upon coverage.     

Carbon Monoxide Oxidation on Metal‐Supported Monolayer Oxide Films: Establishing Which Interface is Active

Ultrathin (monolayer) films of transition metal oxides grown on metal substrates have recently received considerable attention as promising catalytic materials, in particular for low‐temperature CO oxidation. The reaction rate on such systems often increases when the film only partially covers the support, and the effect is commonly attributed to the formation of active sites at the metal/oxide boundary. By studying the structure and reactivity of FeO(111) films on Pt(111), it is shown that, independent of the film coverage, CO oxidation takes place at the interface between reduced and oxidized phases in the oxide film formed under reaction conditions. The promotional role of a metal support is to ease formation of the reduced phase by reaction between CO adsorbed on metal and oxygen at the oxide island edge.