Control of Intramolecular Hydrogen Bonding in a Conformation‐Switchable Helical‐Spring Polymer by Solvent and Temperature

A substituted poly(phenylacetylene) derivative (PPA_HB) with two hydroxymethyl groups at the meta position of the side phenyl ring was examined as a conformation‐switchable helical spring polymer that responds to solvent and heat stimuli in a precisely controlled manner. Intramolecular hydrogen bonds, which cause the helical structure of the polymer, were broken and re‐formed by adjusting the hydrogen‐bonding strength values (pK_HB) of various combinations of solvents or by varying the temperature. In this process, a reversible conformational change from cis–cisoid to cis–transoid, accompanied by a phase transition in the form of a helix‐coil transformation occurred, with the polymer exhibiting critical changes of color fading and recovery in specific environments. These results demonstrate that PPA_HB can be used as either a pK_HB indicator or a thermometer. The color changes of the polymer solution are described in detail based on spectroscopic analyses and thermodynamic considerations.     

Hydrogen bonding of 1- and 2-substituted tetrazoles with conventional proton donors

Dissociation constants of H-complexes formed by 1- and 2-substituted tetrazoles with 4-fluorophenol in carbon tetrachloride and methylene chloride were determined by Fourier-transform IR spectroscopy. The nature of substituents on the endocyclic nitrogen and carbon atoms was found to weakly affect the pK _HB value. By contrast, the position of the N-substituent is significant. For example, 1-methyl-5-phenyl-1H-tetrazole (pK _HB = 0.66 in CH₂Cl₂) is a stronger proton acceptor than 2-methyl-5-phenyl-2H-tetrazole (pK _HB = 0.05 in CH₂Cl₂). The proton affinity of the examined compounds appreciably decreases in going from less polar carbon tetrachloride to more polar methylene chloride. No general correlation was revealed between the pK _HB values of substituted 1H- and 2H-tetrazoles and shifts of the OH stretching vibration frequency of methanol (Δν) upon formation of H-complexes.     

Origin of the color of π‐conjugated columnar polymers: Poly(p‐n‐octylthiophenyl)acetylene prepared using a [Rh(norbornadiene)Cl]2 catalyst

Highly stereospecific polymerization of a novel sulfur containing aromatic acetylenes, that is, (p‐n‐octylthiophenyl)acetylene (pOctSPA), was successfully performed using the Rh complex, [Rh(norbornadiene)Cl]₂‐TEA, catalyst in the presence of various solvents under mild conditions. The resulting polymers were characterized in detail by ¹H NMR, ESR, laser Raman, diffuse reflective UV‐Vis (DRUV‐Vis), and wide angle X‐ray diffraction methods. The data showed that the resulting polymers bear cis‐transoid form, which can induce the cis‐to‐trans isomerization when the cis polymers are subjected to pressure at room temperature under vacuum, breaking rotationally the cis C?C bonds in the main‐chain giving two kinds of π‐radicals, the so‐called cis radical and trans radical as the origin of a polymer magnet like a novel spin glass material. Further, the resulting cis poly(acetylene)s were found to have a helical main‐chain, which is packed in pseudohexagonal crystal called π‐conjugated columnar or nano π‐conjugated columnar as a novel color controllable material. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2836–2850, 2005     

2-alkyl-5-aryltetrazoles as hydrogen bond acceptors

The dissociation constants of the H-complexes formed by 2-alkyl-5-aryltetrazoles and p-fluorophenol in carbon tetrachloride (pK _HB 0.9–1.3) were determined by Fourier-transform IR spectroscopy. 2-Alkyl-5-aryltetrazoles were found to act as medium-strength hydrogen bond acceptors comparable with diazines. The thermodynamic parameters of the equilibrium formation of H-complex with 2-isopropyl-5-phenyltetrazole were determined. The electronic nature of substituents in the tetrazole ring only slightly affects the pK _HB values of tetrazoles.     

Preparation and properties of isomeric polyphenylacetylenes

Polyphenylacetylenes were prepared using ferric acetylacetonate and (i-Bu)₂AlH, RhCl[(C₆H₅)₃P]₃ and thermal initiation. Color, infrared spectra, softening temperatures, ultraviolet fluorescence, solubility, and crystallinity are described. A method is presented for assigning to these three macromolecular species predominantly cis, trans, and cis–trans copolymer structures, respectively. The dominantly cis polymer is believed to form in a transoid conformation which can easily be transformed to a more helical arrangement which exhibits a degree of crystallinity. Pyridine promotes the isomerization of cis to trans structure. The rhodium phosphine is thought to effect chain growth by repeated additions of the acetylenic C? H of monomer across a terminal triple bond. Phenylacetylene thus behaves as a bifunctional molecule in this system. Color, polymer conformation, and crystallinity appear to be strongly interrelated.     

Synthesis and photoisomerization of poly(1‐methylpropargyl ester)s carrying azobenzene moieties

Optically active 1‐methylpropargyl esters bearing azobenzene groups, namely, (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐butyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 1 ), (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐hexyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 2 ), and (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐octyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 3 ) were synthesized and polymerized with Rh⁺(nbd)[η⁶‐C₆H₅B^?(C₆H₅)₃] (nbd, norbornadiene) as a catalyst to afford the corresponding poly(1‐methyloropargyl ester)s with moderate molecular weights (M_n = 24,000–31,300) in good yields (79–84%). Polymers were soluble in common organic solvents including toluene, CHCl₃, CH₂Cl₂, THF, and DMSO, whereas insoluble in diethyl ether, n‐hexane, and methanol. Large optical rotations and strong CD signals demonstrated that all the polymers take a helical structure with a predominantly one‐handed screw sense. The helical structure of the polymers changed with the addition of MeOH and heat. The trans‐azobenzene of the polymer side chains isomerized into cis on UV irradiation, which was accompanied with drastic helical conformational changes of the polymer backbone. The cis‐azobenzene moiety reisomerized into trans on visible‐light irradiation, which induced the recovery of chiral geometry of azobenzene moieties in the side chain. Conformational analysis revealed that the polymers form a tightly twisted right‐handed helical structure with a dihedral angle of 70° at the single bond of the main chain. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4749–4761, 2009     

Mutual conversion between stretched and contracted helices accompanied by a drastic change in color and spatial structure of poly(phenylacetylene) prepared with a [Rh(nbd)Cl]2‐amine catalyst

The yellow‐colored poly(phenylacetylene), Poly( Y ), is obtained from phenylacetylene using a [Rh(nbd)Cl]₂‐NEt₃ catalyst in ethanol at 25 °C. The color of Poly( Y ) drastically changes into red Poly( R ) or reddish‐black Poly( B ) by immersion in acetylacetone or exposure to chloroform vapor, respectively. Poly( R ) is also created from Poly( B ) by contact with acetylacetone. Poly( Y ) is regenerated from both Poly( R ) and Poly( B ) by reprecipitation from their chloroform solution into methanol. Wide‐angle X‐ray scattering (WAXS) patterns of Poly( Y ) and Poly( R ) correspond to a pseudohexagonal crystal called a columnar as stretched cis‐transoid and contracted cis‐cisoid helices, respectively. These helical diameters and pitch widths obtained from the WAXS measurements are agreed with those of MMFF94 calculation models. The smallest helical pitch width is 3.3 Å for Poly( R ) and Poly( B ). Moreover, information regarding the size and ordering of the vacant space within each polymer is estimated by using ¹²⁹Xe NMR technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 752–759     

Factors driving the protonation of poly(N-vinylimidazole) hydrogels

Poly(N-vinylimidazole) hydrogels immersed in aqueous acid solutions produce an increment in the pH of the bath because of proton uptake by basic imidazole moieties, leading to hydrogel protonation. Both kinetic and equilibrium measurements of the pH of the bath have been performed under a variety of conditions and with different hydrogel samples. The kinetics of the xerogel protonation process (which includes solvent and titrant diffusion, the true protonation reaction or ion–dipole association, and the polymer relaxation to a new conformation) are mostly driven by the size of the hydrogel sample, whereas other magnitudes, such as the initial pH, the effective polymer concentration, and the network structure, governed by the crosslinker ratio and total comonomer concentration in the feeding, have a minor influence. pK_a changes with the degree of protonation (α), delimitating two different regions: (1) a broad α range in which pK_a decreases with increasing α but less pronouncedly with increasing ionic strength and (2) an α range close to α = 1 in which pK_a decreases abruptly, more markedly with sulfate than with chloride counteranions and with larger ionic strengths. In the first region, pK_a is determined by repulsive electrostatic interactions and so is larger for titration with H₂SO₄ than with HCl and increases as the effective polymer concentration and ionic strength increase. Two steps (i.e., two protonation sites) can be observed in the titration curves, the second one corresponding to abrupt changes in the basicity of the second pK_a-versus-α region. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2294–2307, 2004     

Synthesis and absorption/emission properties of novel poly(silylenearylenevinylene)s

Polymerization of p-(dimethylsilyl)phenylacetylene in toluene at 25 and 80 °C with RhI(PPh₃)₃ catalyst afforded highly regio- and stereoregular poly(dimethylsilylene-1,4-phenylenevinylene)s [cis- and trans-poly( 1a )s] containing 98% cis- and 99% trans-vinylene moieties, respectively. The trans-type polymers exhibited redshifts and hyperchromic effects in the ultraviolet–visible spectrum as compared with the cis-type counterparts. Photoirradiation of cis- and trans-poly( 1a )s gave cis-rich mixtures at equilibrium states. The trans and cis polymers exhibited different emission properties, for example—trans polymer, emissn λ_max = 400 nm, quantum yield: 3.4 × 10⁻³ and cis polymer, emissn λ_max = 380 nm, quantum yield: 1.5 × 10⁻³. Besides poly( 1a ), poly(dimethylsilylenearylenevinylene)s containing biphenylene and phenylenesilylenephenylene units [poly( 3 )] were prepared. The extent of conjugation in these polymers decreased in the orders of biphenylene > phenylene > phenylenesilylenephenylene as well as trans-vinylene > cis-vinylene. The quantum yield of the trans-rich polymer with biphenylene moiety was fairly large and 0.15. Polyaddition of 1,4-bis(dimethylsilyl)benzene and three types of diethynylarenes (4,4′-diethynylbiphenyl, 2,7-diethynylfluorene, and 2,6-diethynylnaphthalene) catalyzed by RhI(PPh₃)₃ provided novel regio- and stereoregular polymers [poly( 6 )]. These polymers displayed blue light emission with high quantum yields (4–81%). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3615–3624, 2003     

Photoregulation of polymer conformation by photochromic moieties. I. Anionic ligand to an anionic polymer

Abstract— Photoregulated biological processes appear to make use of membrane-bound photochromic macromolecules. In order to elucidate various physicochemical pathways by which these processes can be triggered, model studies have been undertaken employing photochromic moieties bound to synthetic macromolecules with a labile fold structure. Inspired by Lovrien's 1967 work, attention was first focused on the anionic dis-azo stilbene dye chrysophenine (CHP) and poly(methacrylic acid) (PMA) in aqueous solution. This ligand is found to bind to and unfold PMA only if the degree of ionization of the polymer is below 0·75. Viscosity as well as equilibrium dialysis data indicate that maximally one CHP per ten monomer units PMA is bound. The apparent degree of ionization conferred to PMA by the ionic CHP ligand leading to polymer unfolding is the same as the known real degree of ionization leading to polymer unfolding in the absence of CHP. Upon trans→cis photoisomerization, the ligand either desorbs or creates a higher local dielectric constant because of the large cis-azo dipole moments. As a result some refolding to a more compact hydrodynamic volume occurs, as deduced from the viscosity measurements at a low degree of ionization. Simultaneously a lowering of the pK_app by 0·1 pK unit is observed at degrees of ionization below 0·075. Photoregulation of conformation as well as of pK_app indicates two possible pathways for the regulation of ionic fluxes such as have been postulated for photobiological transducers.     

The Role of Hydrophobicity in the Antimicrobial and Hemolytic Activities of Polymethacrylate Derivatives

We synthesized cationic random amphiphilic copolymers by radical copolymerization of methacrylate monomers with cationic or hydrophobic groups and evaluated their antimicrobial and hemolytic activities. The nature of the hydrophobic groups, and polymer composition and length were systematically varied to investigate how structural parameters affect polymer activity. This allowed us to obtain the optimal composition of polymers suitable to act as non-toxic antimicrobials as well as non-selective polymeric biocides. The antimicrobial activity depends sigmoidally on the mole fraction of hydrophobic groups (f_HB). The hemolytic activity increases as f_HB increases and levels off at high values of f_HB, especially for the high-molecular-weight polymers. Plots of HC₅₀ values versus the number of hydrophobic side chains in a polymer chain for each polymer series showed a good correlation and linear relationship in the log–log plots. We also developed a theoretical model to analyze the hemolytic activity of polymers and demonstrated that the hemolytic activity can be described as a balance of membrane binding of polymers through partitioning of hydrophobic side chains into lipid layers and the hydrophobic collapsing of polymer chains. The study on the membrane binding of dye-labeled polymers to large, unilamellar vesicles showed that the hydrophobicity of polymers enhances their binding to lipid bilayers and induces collapse of the polymer chain in solution, reducing the apparent affinity of polymers for the membranes.     

Bridge‐Splitting Reactions of Platinum(II) Complexes with Parametalated Pyridine Spacer Groups: A Kinetic and Mechanistic Study

Substitution reactions of three dinuclear Pt(II) complexes connected by a pyridine‐bridging ligand of variable length, namely [ cis‐{PtOH₂(NH₃)₂}₂–μ–L]⁴⁺, where L = 4,4′‐bis(pyridine)sulfide ( Pt1 ), 4,4′‐bis(pyridine)disulfide ( Pt2 ), and 1,2‐bis(4‐pyridyl)ethane ( Pt3 ) with S‐donor nucleophiles (thiourea, 1,3‐dimethyl‐2‐thiourea, and 1,1,3,3‐tetramethyl‐2‐thiourea) and anionic nucleophiles (SCN^?, I^?, and Br^?) were investigated. The substitutions were followed under pseudo–first‐order conditions as a function of the nucleophile concentration and temperature, using stopped‐flow and UV–visible spectrophotometric methods. The observed pK_a values were, respectively, Pt1 (pK_a1: 4.86; pK_a2: 5.53), Pt2 (pK_a1: 5.19; pK_a2: 6.42), and Pt3 (pK_a1: 5.04; pK_a2: 5.45). The second‐order rate constants for the lability of aqua ligands in the first step decreased in the order Pt2 > Pt3 > Pt1 , whereas for the second step it is Pt1 > Pt2 > Pt3 . The obtained results indicate that introduction of a spacer atom(s) on the structure of the bridging ligand influences the substitution reactivity as well as acidity of the investigated dinuclear Pt(II) complexes. Also nonplanarity of the bridging ligand of Pt1 complex significantly slows down the rate of substitution due to steric hindrance, whereas release of the strain enhances the dissociation of the bridging ligand. The release of the bridging ligand in the second step was confirmed by the ¹H NMR of Pt1‐Cl with thiourea in DMF‐d₇. The temperature dependence of the second–order rate constants and the negative values of entropies of activation (ΔS^#) support an associative mode of the substitution mechanism.     

New Types of Planar Chiral [2.2]Paracyclophanes and Construction of One‐Handed Double Helices

New types of planar chiral (R_p)‐ and (S_p)‐4,7,12,15‐tetrasubstituted [2.2]paracyclophanes were synthesized from racemic 4,12‐dihydroxy[2.2]paracyclophane as the starting compound. Regioselective dibromination and transformation afforded a series of planar chiral (R_p)‐ and (S_p)‐4,7,12,15‐tetrasubstituted [2.2]paracyclophanes, which can be used as chiral building blocks. In this study, left‐ and right‐handed double helical structures were constructed via chemoselective Sonogashira–Hagihara coupling. The double helical compounds were excellent circularly polarized luminescence (CPL) emitters with large molar extinction coefficients, good photoluminescence quantum efficiencies, and large CPL dissymmetry factors.     

Polymerization of α-methylstyrene by living polymer in tetrahydrofuran

Kinetics of polymerization of α-methylstyrene by poly-α-methylstyrylsodium (a “living” polymer) has been studied in tetrahydrofuran at ?78°C. Complex dependences were established: that of the conversion X on reduced time φ and that of the apparent rate constant for the polymer chain propagation on conversion X and on the concentration of living polymers and monomer. The experimental data obtained were explained by assuming a coordination mechanism of anionic polymerization including the following elementary reaction: (a) generation of active polymerization centers (K₁) by interaction of the living polymer with the monomer; (b) propagation of the polymer chains (K₂); (c) monomolecular (K₃₁) and bimolecular (K₃₂) reactions of isomerization of active centers resulting in the formation of high molecular weight living polymers capable of again becoming active centers of polymerization. Approximate derivation of kinetic equation was carried out and the constants of elementary reactions were determined (K₁ = 0.15, K₂ = 24, K₃₂ = 14.1./mole-min and K₃₁ = 0.05 min^?1). The coincidence of the expected dependencies X = F(τ; φ) K_p = F(X; n₀^?1/2); dx/dτ = F(n₀) with the experimental ones was followed with the aid of computers. The expected change in the values of X and K_p depending on the contribution of each elementary reaction to the overall polymerization process was analyzed.     

Preparation,Characterisation, and Structure of N-Methylated Derivatives of 1,3,5-Triamino-1,3,5-trideoxy-cis-inositol: Polyalcohols with Unusual Acidity

1,3,5-Trideoxy-1,3,5-tris(dimethylamino)-cis-inositol (TDCI) and 1,3,5-trideoxy-1,3,5-tris(trimethylammonio)-cis-inositol (TTCI) were prepared by methylation of 1,3,5-triamino-1,3,5-trideoxy-cis-inositol (TACI). The ability of TDCI to form both intermolecular and intramolecular H-bonds, as demonstrated by X-ray diffraction, is probably responsible for the good solubility of TDCI in almost every common solvent. TTCI was found to be a polyol of unusual high acidity (pK₁ = 8.14 ± 0.02, pK₂ = 13.0 ± 0.2). This phenomenon could be explained by electrostatic interactions between the charged substituents of the cyclohexane residue.     

Coefficients of molecular packing and intrinsic birefringence of aromatic polyimides estimated using refractive indices and molecular polarizabilities

Molecular structure dependences of the coefficients of molecular packing (K_p) and the intrinsic birefringence (Δn⁰) were investigated for aromatic polyimides (PIs) using a method based on the modified Lorentz–Lorenz equation and the Vuks equation. This method needs only average refractive indices and polarizability tensors ( ) for PI repeating units. αˆ was calculated using the density functional theory at the B3LYP/6-31+G(d) theory level that was confirmed as optimal for PI repeating units. Because bent or kinked structures in main chain hinder the ordering of polymer chains, K_p decreases in cases that ether linkages are introduced in the main chain and that kinked-structured dianhydrides are used. Introduction of side groups, trifluoromethyl ( CF₃) groups in particular, also causes decreases in K_p. On the other hand, the estimated values of Δn⁰ are proportional to the calculated anisotropy in αˆ (Δα/V_vdw), thus Δn⁰ can be well predicted by computation. The values of Δα/V_vdw are decreased not only by bent structures in the main chain (e.g., ether linkage), presence of side groups, but also by large fractions of imide rings in the polymer structures. The estimated values of Δn⁰ range from 0.338 to 0.470, which are much larger than the reported ones for optically transparent conventional polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2354–2366, 2004     

Cucurbit[7]uril Complexation Drives Thermal trans–cis‐Azobenzene Isomerization and Enables Colorimetric Amine Detection

Complexation of yellow diaminoazobenzenes 1 and 3 inside cucurbit[7]uril (CB[7]) results in the formation of purple‐colored CB[7] ? cis‐ 1? 2 H⁺ and CB[7] ? cis‐ 3? 2 H⁺ complexes, respectively. The high binding affinity and selectivity displayed by CB[7] toward 1 and 3 pays the >10 kcal mol^?1 thermodynamic cost for this isomerization. We investigated the behavior of these complexes as a function of pH and observed large pK_a shifts and high pH responsiveness, which are characteristic of cucurbit[n]uril molecular containers. The remarkable yellow to purple color change was utilized in the construction of an indicator displacement assay for biologically active amines 4 – 10 . This indicator displacement assay is capable of quantifying the pseudoephedrine ( 5 ) content in Sudafed tablets over the 5–350 μM range.     

Tunable phase transition behaviors of pH-sensitive polyaspartamides having various cationic pendant groups

New pH-sensitive graft copolymers based on poly(2-hydroxyethyl aspartamide) (PHEA) were prepared by attaching various cationic monomers, such as 4-(aminomethyl)pyridine (PY), 1-(3-aminopropyl)imidazole (IM), and N-(3-aminopropyl)dibuthylamine (BU), as pH-sensitive units and octadecylamine (C₁₈) as a hydrophobic segment on poly(succinimide). Phase transition of each copolymer solution occurred at a vicinity of the pK _a value of the cationic groups, and their insoluble pH ranges were broadened as the feed amount of pH-sensitive moieties was increased. Depending on the cationic grafts having different pK _a values, the pH ranges where the copolymer became insoluble could be tuned. Copolymers PHEA-g-C₁₈-PY, PHEA-g-C₁₈-IM, and PHEA-g-C₁₈-BU exhibited phase separations in solutions at pH ranges of 4∼6, 6∼8, and 9∼12, respectively. These polymers have the unique feature of their pH sensitivity profiles being identified to three regimes. Under low pH conditions (below pK _a ), the polymer solution is transparent. At medium pH (around pK _a ), polymer precipitation occurred in solution. At pH > pK _a , the polymer solution is gradually dissolved again.     

A cyanide-bridged 1-D helical chain involving both four- and six-coordinate nickel(II)

A cyanide-bridged coordination polymer, {[Ni(tren)][Ni(CN)₄]} _n (tren?=?tris(2-aminoethyl)amine), has been synthesized by self-assembly of cis-[Ni(tren)]²⁺ and [Ni(CN)₄]^2? building blocks. In the molecular structure, the paramagnetic cis-[Ni(tren)]²⁺ cations are bridged by diamagnetic [Ni(CN)₄]^2? anions through two cis-cyanides to form a 1-D helical chain of {[Ni(tren)][Ni(CN)₄]} _n . The compound crystallizes with a centrosymmetrical space group, P2₁ /n, in which the helical chains are packed in alternating right- and left-handed chiralities with a helical pitch of 10.2566(3)?Å (equal to the length of the b-axis), leading to the formation of a racemic compound. The crystal packing is stabilized by moderately strong hydrogen-bonding between primary amines of tren and nitrogens of terminal cyanide.     

Preparation of ureido group bearing polymers and their upper critical solution temperature in water

Poly(2‐ureidoethylmethacrylate) (PUEM_n) was synthesized via reversible addition‐fragmentation chain transfer (RAFT) radical polymerization and following polymer reaction. We prepared two PUEM_n samples with different degrees of polymerization (n = 100 and 49). The polymers exhibited upper critical solution temperature (UCST) in phosphate‐buffered saline (PBS) solution. The phase separation temperature (T_p) in PBS can be controlled ranging from 17 to 55 °C by changing molecular weight of the polymer, polymer concentration, and adding NaCl concentration. The polymers in PBS formed coacervate drops by liquid–liquid phase separations below T_p. Results of the dielectric relaxation measurement, the hydration number per monomeric unit was 5 above T_p. Based on a fluorescence study, the polymer formed slightly hydrophobic environments below T_p. The liquid–liquid phase separation was occurred presumably because of weak hydrophobic interactions and intermolecularly hydrogen bonding interactions between the pendant ureido groups. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2845–2854