A Conjugated Polymeric Supramolecular Network with Aggregation‐Induced Emission Enhancement: An Efficient Light‐Harvesting System with an Ultrahigh Antenna Effect

Superior artificial light‐harvesting systems (ALHSs) require exceptional capacity in harvesting light and transferring energy. In this work, we report a novel strategy to build ALHSs with an unprecedented antenna effect (35.9 in solution and 90.4 in solid film). The ALHSs made use of a conjugated polymeric supramolecular network (CPSN), a crosslinked network obtained from the self‐assembly of a pillar[5]arene‐based conjugated polymeric host ( CPH ) and conjugated ditopic guests (Gs). The excellent performance of the CPSN could be attributed to the following factors: 1) The “molecular wire effect” of the conjugated polymeric structure, 2) aggregation‐induced enhanced emission (AEE) moieties in the CPH backbone, and 3) high capacity of donor–acceptor energy transfer, and 4) crosslinked structures triggered by the host–guest binding between Gs and CPH . Moreover, the emission of the CPSN could be tuned by using different Gs or varying the host/guest ratio, thus reaching a 96 % sRGB area.     

Acridan‐Grafted Poly(biphenyl germanium) with High Triplet Energy,Low Polarizability,and an External Heavy‐Atom Effect for Highly Efficient Sky‐Blue TADF Electroluminescence

We propose the novel σ–π conjugated polymer poly(biphenyl germanium) grafted with two electron‐donating acridan moieties on the Ge atom for use as the host material in a polymer light‐emitting diode (PLED) with the sky‐blue‐emitting thermally activated delayed fluorescence (TADF) material DMAC‐TRZ as the guest. Its high triplet energy (E_T) of 2.86 eV is significantly higher than those of conventional π–π conjugated polymers (E_T=2.65 eV as the limit) and this guest emitter (E_T=2.77 eV). The TADF emitter emits bluer emission than in other host materials owing to the low orientation polarizability of the germanium‐based polymer host. The Ge atom also provides an external heavy‐atom effect, which increases the rate of reverse intersystem crossing in this TADF guest, so that more triplet excitons are harvested for light emission. The sky‐blue TADF electroluminescence with this host/guest pair gave a record‐high external quantum efficiency of 24.1 % at maximum and 22.8 % at 500 cd m^?2.     

Acridan‐Grafted Poly(biphenyl germanium) with High Triplet Energy,Low Polarizability,and an External Heavy‐Atom Effect for Highly Efficient Sky‐Blue TADF Electroluminescence

We propose the novel σ–π conjugated polymer poly(biphenyl germanium) grafted with two electron‐donating acridan moieties on the Ge atom for use as the host material in a polymer light‐emitting diode (PLED) with the sky‐blue‐emitting thermally activated delayed fluorescence (TADF) material DMAC‐TRZ as the guest. Its high triplet energy (E_T) of 2.86 eV is significantly higher than those of conventional π–π conjugated polymers (E_T=2.65 eV as the limit) and this guest emitter (E_T=2.77 eV). The TADF emitter emits bluer emission than in other host materials owing to the low orientation polarizability of the germanium‐based polymer host. The Ge atom also provides an external heavy‐atom effect, which increases the rate of reverse intersystem crossing in this TADF guest, so that more triplet excitons are harvested for light emission. The sky‐blue TADF electroluminescence with this host/guest pair gave a record‐high external quantum efficiency of 24.1 % at maximum and 22.8 % at 500 cd m^?2.     

Quantifying the efficiency of förster‐assisted optical gain in semiconducting polymer blends by excitation wavelength selective amplified spontaneous emission

We study the correlation between Förster resonance energy transfer (FRET) and optical gain properties in conjugated polymer blends based on regioregular poly(3‐hexylthiophene) (P3HT) and poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole) (F8BT). First, FRET dynamics are investigated with femtosecond transient absorption spectroscopy observing a sub‐picosecond energy transfer from F8BT to P3HT (550 fs) at medium doping levels (40% wt P3HT in F8BT). Amplified spontaneous emission (ASE) is then characterized in blends upon exciting predominantly the host and guest polymers, respectively. The corresponding density of absorbed photons at threshold conditions is compared upon host or guest photoexcitation as a method to quantitatively determine the FRET‐assisted ASE efficiencies. We observe a reduction in ASE efficiency upon host photoexcitation of 20%, in the best case, respect to guest photoexcitation. Our results confirm that even in strongly coupled host:guest mixtures delayed exciton population by energy transfer is subtle to losses ascribed to exciton–exciton annihilation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2311–2317.     

Host–Guest Interactions of Phosphorescent Molecular Tweezers Based on an Alkynylplatinum(II) Terpyridine System with Polyaromatic Hydrocarbons

Host–guest interactions of a molecular tweezer complex 1 with various planar organic molecules including polyaromatic hydrocarbons (PAHs) were investigated by 1D and 2D ¹H NMR spectroscopy, UV/Vis absorption and emission titration studies. 2D and DOSY NMR spectroscopies support the sandwiched binding mode based on 1:1 host–guest interactions. The binding constants (K_S) of complex 1 for various PAHs were determined by NMR titration studies and the values were found to span up to an order of 10⁴ M ^?1 for coronene to no observable interaction for benzene, indicating that the π‐surface area is important for such host–guest interactions. The substituent effect on the host–guest interaction based on the guest series of 9‐substituted anthracenes was also studied. In general, a stronger interaction was observed for the anthracene guest with electron‐donating groups, although steric and π‐conjugation factors cannot be completely excluded. The photophysical responses of complex 1 upon addition of various PAHs were measured by UV/Vis and emission titration studies. The UV/Vis absorption spectra were found to show a drop in absorbance of the metal‐to‐ligand charge‐transfer (MLCT) and ligand‐to‐ligand charge‐transfer (LLCT) admixture band upon addition of various guest molecules to 1 , whereas the emission behavior was found to change differently depending on the guest molecules, showing emission enhancement and/or quenching. It was found that emission quenching occurred either via energy transfer or electron transfer pathway or both, while emission enhancement was caused by the increase in rigidity of complex 1 as a result of host–guest interaction.     

Insights into the Correlation of Cross-linking Modes with Mechanical Properties for Dynamic Polymeric Networks

Simultaneously introducing covalent and supramolecular cross-links into one system to construct dually cross-linked networks, has been proved an effective approach to prepare high-performance materials. However, so far, features and advantages of dually cross-linked networks compared with those possessing individual covalent or supramolecular cross-linking points are rarely investigated. Herein, on the basis of comparison between supramolecular polymer network (SPN), covalent polymer network (CPN) and dually cross-linked polymer network (DPN), we reveal that the dual cross-linking strategy can endow the DPN with integrated advantages of CPN and SPN. Benefiting from the energy dissipative ability along with the dissociation of host–guest complexes, the DPN shows excellent toughness and ductility similar to the SPN. Meanwhile, the elasticity of covalent cross-links in the DPN could rise the structural stability to a level comparable to the CPN, exhibiting quick deformation recovery capacity. Moreover, the DPN has the strongest breaking stress and puncture resistance among the three, proving the unique property advantages of dual cross-linking method. These findings gained from our study further deepen the understanding of dynamic polymeric networks and facilitate the preparation of high-performance elastomeric materials.     

Photoluminescence of bridged polysilsesquioxanes containing urea groups: Doping with Safranine‐O to generate red‐light emission

Bridged polysilsesquioxanes containing urea groups (ureasils) exhibit a broad photoluminescent emission in the visible spectrum. For a particular bridged polysilsesquioxane synthesized by the hydrolytic condensation of a precursor prepared by reaction of 4,4′‐[1,3 phenylenebis‐(1‐methylethylidene)]bis(aniline) (BSA) with 3‐(isocyanatepropyl)triethoxysilane (IPTES), we show that the broad photoluminescent band could be transformed into a relatively narrow emission band located in the red region of the spectra, by doping with Safranine‐O. The spectral overlap between the host emission and the dye absorption generated an efficient energy transfer process (antenna effect). Absorption, emission, and triplet–triplet absorption spectra revealed an efficient dispersion of the dye in the ureasil as well as the presence of strong host‐guest specific interactions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 289–296, 2008     

A Rapidly Self‐Healing Supramolecular Polymer Hydrogel with Photostimulated Room‐Temperature Phosphorescence Responsiveness

Development of self‐healing and photostimulated luminescent supramolecular polymeric materials is important for artificial soft materials. A supramolecular polymeric hydrogel is reported based on the host–guest recognition between a β‐cyclodextrin (β‐CD) host polymer (poly‐β‐CD) and an α‐bromonaphthalene (α‐BrNp) polymer (poly‐BrNp) without any additional gelator, which can self‐heal within only about one minute under ambient atmosphere without any additive. This supramolecular polymer system can be excited to engender room‐temperature phosphorescence (RTP) signals based on the fact that the inclusion of β‐CD macrocycle with α‐BrNp moiety is able to induce RTP emission (CD‐RTP). The RTP signal can be adjusted reversibly by competitive complexation of β‐CD with azobenzene moiety under specific irradiation by introducing another azobenzene guest polymer (poly‐Azo).     

Restricted Conformational Flexibility of a Triphenylamine Derivative on the Formation of Host–Guest Complexes with Various Macrocyclic Hosts

Herein, we report the host–guest‐type complex formation between the host molecules cucurbit[7]uril (CB[7]), β‐cyclodextrin (β‐CD), and dibenzo[24]crown‐8 ether (DB24C8) and a newly synthesized triphenylamine (TPA) derivative 1 X₃ as the guest component. The host–guest complex formation was studied in detail by using ¹H NMR, 2D NOESY, UV/Vis fluorescence, and time‐resolved emission spectroscopy. The chloride salt of the TPA derivative was used for recognition studies with CB[7] and β‐CD in an aqueous medium. The restricted internal rotation of the guest molecule on complex formation with either of these two host molecules was reflected in the enhancement of the emission quantum yield and the average excited‐state lifetime for the triphenylamine‐based excited states. Studies with DB24C8 as the host molecule were performed in dichloromethane, a medium that maximizes the noncovalent interaction between the host and guest fragments. The Förster resonance energy transfer (FRET) process involving DB24C8 and 1 (PF₆)₃, as the donor and acceptor fragments, respectively, was established by electrochemical, steady‐state emission, and time‐correlated single‐photon counting studies.     

Recognition‐Mediated Hydrogel Swelling Controlled by Interaction with a Negative Thermoresponsive LCST Polymer

Most polymeric thermoresponsive hydrogels contract upon heating beyond the lower critical solution temperature (LCST) of the polymers used. Herein, we report a supramolecular hydrogel system that shows the opposite temperature dependence. When the non‐thermosesponsive hydrogel NaphtGel, containing dialkoxynaphthalene guest molecules, becomes complexed with the tetra cationic macrocyclic host CBPQT⁴⁺, swelling occurred as a result of host–guest complex formation leading to charge repulsion between the host units, as well as an osmotic contribution of chloride counter‐ions embedded in the network. The immersion of NaphtGel in a solution of poly(N‐isopropylacrylamide) with tetrathiafulvalene (TTF) end groups complexed with CBPQT⁴⁺ induced positive thermoresponsive behaviour. The LCST‐induced dethreading of the polymer‐based pseudorotaxane upon heating led to transfer of the CBPQT⁴⁺ host and a concomitant swelling of NaphtGel. Subsequent cooling led to reformation of the TTF‐based host–guest complexes in solution and contraction of the hydrogel.     

High triplet energy polymer as host for electrophosphorescence with high efficiency

We report the conjugated polymer P(tBu-CBP) as a host with high triplet energy (E(T) 2.53 eV) and suitable HOMO (5.3 eV) and LUMO (2.04 eV) energy levels. Upon doping with green and red emission Ir-complexes, it gives devices with high luminous and external quantum efficiencies for green emission (23.7 cd/A, 6.57%) and for red emission (5.1 cd/A, 4.23%), respectively, and low turn-on voltage (3 V). For both devices, the efficiencies are higher than those of the corresponding devices with the same backbone P(3,6-Cz) as a host by a factor of 4, even though the latter has an E(T) (2.6 eV) slightly higher than that of the former. The results reflect that, in phosphorescent devices, the difference in E(T) between the host and guest is not the only factor that determines the device efficiency, and the present side group modification via the 9 position of carbazole also plays an important role, which allows a tuning of HOMO and LUMO levels to provide more balance in electron and hole fluxes and provides prevention from formation of excimer.     

Ultra-High to Ultra-Low Drug-Loaded Micelles: Probing Host–Guest Interactions by Fluorescence Spectroscopy

Polymer micelles are an attractive means to solubilize water insoluble compounds such as drugs. Drug loading, formulations stability and control over drug release are crucial factors for drug-loaded polymer micelles. The interactions between the polymeric host and the guest molecules are considered critical to control these factors but typically barely understood. Here, we compare two isomeric polymer micelles, one of which enables ultra-high curcumin loading exceeding 50 wt.%, while the other allows a drug loading of only 25 wt.%. In the low capacity micelles, steady-state fluorescence revealed a very unusual feature of curcumin fluorescence, a high energy emission at 510 nm. Time-resolved fluorescence upconversion showed that the fluorescence life time of the corresponding species is too short in the high-capacity micelles, preventing an observable emission in steady-state. Therefore, contrary to common perception, stronger interactions between host and guest can be detrimental to the drug loading in polymer micelles.     

Polarized photoluminescence from poly(p-phenylene-ethynylene) via a block copolymer nanotemplate

A new approach based on a conjugated polymer/block copolymer guest/host system for the generation of polarized photoluminescence is reported. Synthetic modification of a poly(p-phenylene-ethynylene) (PPE) conjugated polymer is used for domain-specific incorporation into a cylindrical morphology block copolymer host matrix. Subsequent ordering of the host nanostructure via roll cast processing templates uniaxial alignment of the guest PPE. The ordered films are optically anisotropic displaying both polarized absorption with a dichroic ratio of 3.0 at 440 nm and polarized emission with a polarization ratio of 7.3 at 472 nm.     

Programmable Polymer‐Based Supramolecular Temperature Sensor with a Memory Function

A new class of polymeric thermometers with a memory function is reported that is based on the supramolecular host–guest interactions of poly(N‐isopropylacrylamide) (PNIPAM) with side‐chain naphthalene guest moieties and the tetracationic macrocycle cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) as the host. This supramolecular thermometer exhibits a memory function for the thermal history of the solution, which arises from the large hysteresis of the thermoresponsive LCST phase transition (LCST=lower critical solution temperature). This hysteresis is based on the formation of a metastable soluble state that consists of the PNIPAM–CBPQT⁴⁺ host–guest complex. When heated above the transition temperature, the polymer collapses, and the host–guest interactions are disrupted, making the polymer more hydrophobic and less soluble in water. Aside from providing fundamental insights into the kinetic control of supramolecular assemblies, the developed thermometer with a memory function might find use in applications spanning the physical and biological sciences.     

Engineering Donor–Acceptor Heterostructure Metal–Organic Framework Crystals for Photonic Logic Computation

Photonic materials use photons as information carriers and offer the potential for unprecedented applications in optical and optoelectronic devices. In this study, we introduce a new strategy for photonic materials using metal–organic frameworks (MOFs) as the host for the rational construction of donor–acceptor (D–A) heterostructure crystals. We have engineered a rich library of heterostructure crystals using the MOF NKU‐111 as a host. NKU‐111 is based upon an electron‐deficient tridentate ligand (acceptor) that can bind to various electron‐rich guests (donors). The resulting heterocrystals exhibit spatially segregated multi‐color emission resulting from the guest‐dependent charge‐transfer (CT) emission. Spatially effective mono‐directional energy transfer results from tuning the energy gradient between adjacent domains through the selection of donor guest molecules, which suggests potential applications in integrated optical circuit devices, for example, photonic diodes, on‐chip signal processing, optical logic gates.     

Highly Flexible,Tough, and Self‐Healing Supramolecular Polymeric Materials Using Host–Guest Interaction

Flexible, tough, and self‐healable polymeric materials are promising to be a solution to the energy problem by substituting for conventional heavy materials. A fusion of supramolecular chemistry and polymer chemistry is a powerful method to create such intelligent materials. Here, a supramolecular polymeric material using multipoint molecular recognition between cyclodextrin (CD) and hydrophobic guest molecules at polymer side chain is reported. A transparent, flexible, and tough hydrogel (host–guest gel) is formed by a simple preparation procedure. The host–guest gel shows self‐healing property in both wet state and dry state due to reversible nature of host–guest interaction. The practical utility of the host–guest gel as a scratch curable coating is demonstrated.

     

Self‐Healing,Expansion–Contraction,and Shape‐Memory Properties of a Preorganized Supramolecular Hydrogel through Host–Guest Interactions

Supramolecular materials cross‐linked between polymer chains by noncovalent bonds have the potential to provide dynamic functions that are not produced by covalently cross‐linked polymeric materials. We focused on the formation of supramolecular polymeric materials through host–guest interactions: a powerful method for the creation of nonconventional materials. We employed two different kinds of host–guest inclusion complexes of β‐cyclodextrin (βCD) with adamantane (Ad) and ferrocene (Fc) to bind polymers together to form a supramolecular hydrogel (βCD‐Ad‐Fc gel). The βCD‐Ad‐Fc gel showed self‐healing ability when damaged and responded to redox stimuli by expansion or contraction. Moreover, the βCD‐Ad‐Fc gel showed a redox‐responsive shape‐morphing effect. We thus succeeded in deriving three functions from the introduction of two kinds of functional units into a supramolecular material.     

Activating Versatile Mechanoluminescence in Organic Host–Guest Crystals by Controlling Exciton Transfer

Mechanoluminescence (ML) materials are attracting increasing interest owing to promising applications in various areas. However, to date, it remains a major challenge to develop a precise and universal route to achieving organic ML materials. Herein, we show that ML can be easily realized in organic piezophotonic host–guest crystals, under conditions in which neither the host nor the guest is ML-active. The experimental and theoretical results reveal that excitons of the host generated by piezoelectricity can be harvested effectively by the guest for light emission, owing to the restraint of intersystem crossing process. Moreover, different host–guest crystals are constructed, wherein the emission color, intensity, color purity, and emission duration of ML can be manipulated. This work deepens our understanding of organic ML generation in piezophotonic host–guest crystals and provides an inspiring principle to design more organic ML materials.     

Supramolecular hydrogen-bonded liquid–crystalline polymer complexes. Design of side-chain polymers and a host–guest system by noncovalent interaction

Supramolecular liquid–crystalline polymeric complexes based on a backbone that contains vinyl pyridine units and azobenzene or biphenyl derivatives that posses alkyl chains terminated by carboxylic acid have been obtained by the formation of intermolecular hydrogen bonds between the carboxylic acid and the pyridyl moieties. The polymeric complexes behave as side-chain liquid–crystalline polymers and exhibit smectic phases. A new type of H-bonded host-guest liquid–crystalline system is also reported. The liquid–crystalline host copolymers contain both mesogenic acrylate and 4-vinylpyridine units. The guest molecule is an azobenzene that has a carboxylic acid moiety at one of its extremities. The H-bonded polymeric host–guest complexes exhibit nematic phases. Sequential UV and visible light irradiation of the polymeric complex causes reversible photochemically induced phase transitions. The isothermal nematic–isotropic and isotropic–nematic transitions result from the trans-cis and cis-trans photoisomerization of the guest azobenzene in the host–guest system. © 1996 John Wiley & Sons, Inc.