A 3D Hydroxylated MXene/Carbon Nanotubes Composite as a Scaffold for Dendrite‐Free Sodium‐Metal Electrodes

Sodium metal is a promising anode, but uneven Na deposition with a dendrite growth seriously impedes its application. Herein, a fibrous hydroxylated MXene/carbon nanotubes (h‐Ti₃C₂/CNTs) composite is designed as a scaffold for dendrite‐free Na metal electrodes. This composite displays fast Na⁺/electron transport kinetics and good thermal conductivity and mechanical properties. The h‐Ti₃C₂ contains abundant sodiophilic functional groups, which play a significant role in inducing homogeneous nucleation of Na. Meanwhile, CNTs provide high tensile strength and ease of film‐forming. As a result, h‐Ti₃C₂/CNTs exhibit a high average Coulombic efficiency of 99.2 % and no dendrite after 1000 cycles. The h‐Ti₃C₂/CNTs/Na based symmetric cells show a long lifespan over 4000 h at 1.0 mA cm^?2 with a capacity of 1.0 mAh cm^?2. Furthermore, Na‐O₂ batteries with a h‐Ti₃C₂/CNTs/Na anode exhibit a low potential gap of 0.11 V after an initial 70 cycles.     

Revealing an Interconnected Interfacial Layer in Solid‐State Polymer Sodium Batteries

Replacing the commonly used nonaqueous liquid electrolytes in rechargeable sodium batteries with polymer solid electrolytes is expected to provide new opportunities to develop safer batteries with higher energy densities. However, this poses challenges related to the interface between the Na‐metal anode and polymer electrolytes. Driven by systematically investigating the interface properties, an improved interface is established between a composite Na/C metal anode and electrolyte. The observed chemical bonding between carbon matrix of anode with solid polymer electrolyte, prevents delamination, and leads to more homogeneous plating and stripping, which reduces/suppresses dendrite formation. Full solid‐state polymer Na‐metal batteries, using a high mass loaded Na₃V₂(PO₄)₃ cathode, exhibit ultrahigh capacity retention of more than 92 % after 2 000 cycles and over 80 % after 5 000 cycles, as well as the outstanding rate capability.     

Dendrite-Free Sodium Metal Anodes Enabled by a Sodium Benzenedithiolate-Rich Protection Layer

Sodium metal is an ideal anode material for metal rechargeable batteries, owing to its high theoretical capacity (1166 mAh g⁻¹), low cost, and earth-abundance. However, the dendritic growth upon Na plating, stemming from unstable solid electrolyte interphase (SEI) film, is a major and most notable problem. Here, a sodium benzenedithiolate (PhS₂Na₂)-rich protection layer is synthesized in situ on sodium by a facile method that effectively prevents dendrite growth in the carbonate electrolyte, leading to stabilized sodium metal electrodeposition for 400 cycles (800 h) of repeated plating/stripping at a current density of 1 mA cm⁻². The organic salt, PhS₂Na₂, is found to be a critical component in the protection layer. This finding opens up a new and promising avenue, based on organic sodium slats, to stabilize sodium metals with a protection layer.     

Facile Stabilization of the Sodium Metal Anode with Additives: Unexpected Key Role of Sodium Polysulfide and Adverse Effect of Sodium Nitrate

Sodium metal is an attractive anode for next‐generation energy storage systems owing to its high specific capacity, low cost, and high abundance. Nevertheless, uncontrolled Na dendrite growth caused by the formation of unstable solid electrolyte interphase (SEI) leads to poor cycling performance and severe safety concerns. Sodium polysulfide (Na₂S₆) alone is revealed to serve as a positive additive or pre‐passivation agent in ether electrolyte to improve the long‐term stability and reversibility of the Na anode, while Na₂S₆‐NaNO₃ as co‐additive has an adverse effect, contrary to the prior findings in the lithium anode system. A superior cycling behavior of Na anode is first demonstrated at a current density up to 10 mA cm^?2 and a capacity up to 5 mAh cm^?2 over 100 cycles. As a proof of concept, a high‐capacity Na‐S battery was prepared by pre‐passivating the Na anode with Na₂S₆. This study gives insights into understanding the differences between Li and Na systems.     

Constructing Co3O4 Nanowires on Carbon Fiber Film as a Lithiophilic Host for Stable Lithium Metal Anodes

Lithium metal has been considered as the most promising anode electrode for substantially improving the energy density of next‐generation energy storage devices. However, uncontrollable lithium dendrite growth, an unstable solid electrolyte interface (SEI), and infinite volume variation severely shortens its service lifespan and causes safety hazards, thus hindering the practical application of lithium metal electrodes. Here, carbon fiber film (CFF) modified by lithiophilic Co₃O₄ nanowires (denoted as Co₃O₄ Nws) was proposed as a matrix for prestoring lithium metal through a thermal infusion method. The homogeneous needle‐like Co₃O₄ nanowires can effectively promote molten lithium to infiltrate into the CFF skeleton. The post‐formed Co?Li₂O nanowires produced by the reaction of Co₃O₄ Nws and molten lithium can homogeneously distribute lithium ions flux and efficaciously increase the adsorption energy with lithium ions proved by density functional theory (DFT) calculation, boosting a uniform lithium deposition without dendrite growth. Therefore, the obtained composite anode (denoted as CFF/Co?Li₂O@Li) exhibits superior electrochemical performance with high stripping/plating capacities of 3 mAh cm^?2 and 5 mAh cm^?2 over long‐term cycles in symmetrical batteries. Moreover, in comparison with bare lithium anode, superior Coulombic efficiencies coupled with copper collector and full battery behaviors paired with LiFePO₄ cathode are achieved when CFF/Co?Li₂O@Li composite anode was employed.     

Flexible Li-CO2 Batteries with Liquid-Free Electrolyte

Developing flexible Li-CO₂ batteries is a promising approach to reuse CO₂ and simultaneously supply energy to wearable electronics. However, all reported Li-CO₂ batteries use liquid electrolyte and lack robust electrolyte/electrodes structure, not providing the safety and flexibility required. Herein we demonstrate flexible liquid-free Li-CO₂ batteries based on poly(methacrylate)/poly(ethylene glycol)-LiClO₄-3 wt %SiO₂ composite polymer electrolyte (CPE) and multiwall carbon nanotubes (CNTs) cathodes. The CPE (7.14×10⁻² mS cm⁻¹) incorporates with porous CNTs cathodes, displaying stable structure and small interface resistance. The batteries run for 100 cycles with controlled capacity of 1000 mAh g⁻¹. Moreover, pouch-type flexible batteries exhibit large reversible capacity of 993.3 mAh, high energy density of 521 Wh kg⁻¹, and long operation time of 220 h at different degrees of bending (0–360°) at 55 °C.     

Layer-By-Layer (LBL) hybrid MOF coating for graphene-based multilayer composite: Synthesis and application as anode for lithium ion batteries

The hybrid anodic materials with high porosity and low charge resistance exhibit high specific capacity and stable cyclic stability for lithium ion battery (LIBs). For this purpose, three-dimensional hollow material, metal organic framework (MOF-199) was coated over the active surface of oxidized derivative of graphene (Graphene oxide, GO), via layer-by-layer (LBL) coating method. Cupric acetate and benzene-1,3,5-tricarboxylic acid [Cu₃(BTC)₂], were alternatively coated on the active surface of GO as an anode material, to enhance the structural diversity and reduce the synergistic effect of insertion and extraction of Li⁺ ions for LIBs. Sharp absorption peaks from 1620 cm⁻¹ to 1360 cm⁻¹ and intense ring bends ∼1000 cm⁻¹ was identified through FTIR. Powder XRD provides the evidence for size reduction of Cu₃(BTC)₂@GO composite (32.6 nm) comparative to GO (43.7 nm). Outcome of EIS analysis shows the charge transfer resistance of simple GO is 2410 Ω, which is 4 times higher than R_ct of Cu₃(BTC)₂@GO composite (590 Ω). Similarly the Warburg impedance co-efficient for simple GO (448.8 Ωs^−1/2) is also higher than A_w of Cu₃(BTC)₂@GO composite (77.64 Ωs^−1/2). The synthesized material show high initial charge/discharge capacity, 1200/1420 mAh/g with 85% Coulombic efficiency and reversible discharge capacity, 1296 mAh/g after 100 cycles at 100 mA/g current density. The 98.9% Coulombic efficiency and 91% retaining capacity of composite at 100th cycle with cyclic stability, provides the phenomenon approach towards the rechargeable LIBs for industrial technology.     

Processable and Moldable Sodium‐Metal Anodes

Sodium‐ion batteries are similar in concept and function to lithium‐ion batteries, but their development and commercialization lag far behind. One obstacle is the lack of a standard reference electrode. Unlike Li foil reference electrodes, sodium is not easily processable or moldable and it deforms easily. Herein we fabricate a processable and moldable composite Na metal anode made from Na and reduced graphene oxide (r‐GO). With only 4.5 % percent r‐GO, the composite anodes had improved hardness, strength, and stability to corrosion compared to Na metal, and can be engineered to various shapes and sizes. The plating/stripping cycling of the composite anode was significantly extended in both ether and carbonate electrolytes giving less dendrite formation. We used the composite anode in both Na‐O₂ and Na‐Na₃V₂(PO₄)₃ full cells.     

Dendrite‐Free Sodium Metal Anodes Enabled by a Sodium Benzenedithiolate‐Rich Protection Layer

Sodium metal is an ideal anode material for metal rechargeable batteries, owing to its high theoretical capacity (1166 mAh g^?1), low cost, and earth‐abundance. However, the dendritic growth upon Na plating, stemming from unstable solid electrolyte interphase (SEI) film, is a major and most notable problem. Here, a sodium benzenedithiolate (PhS₂Na₂)‐rich protection layer is synthesized in situ on sodium by a facile method that effectively prevents dendrite growth in the carbonate electrolyte, leading to stabilized sodium metal electrodeposition for 400 cycles (800 h) of repeated plating/stripping at a current density of 1 mA cm^?2. The organic salt, PhS₂Na₂, is found to be a critical component in the protection layer. This finding opens up a new and promising avenue, based on organic sodium slats, to stabilize sodium metals with a protection layer.     

A Polarized Gel Electrolyte for Wide-Temperature Flexible Zinc-Air Batteries

The development of flexible zinc-air batteries (FZABs) has attracted broad attention in the field of wearable electronic devices. Gel electrolyte is one of the most important components in FZABs, which is urgent to be optimized to match with Zn anode and adapt to severe climates. In this work, a polarized gel electrolyte of polyacrylamide-sodium citric (PAM-SC) is designed for FZABs, in which the SC molecules contain large amount of polarized −COO⁻ functional groups. The polarized −COO⁻ groups can form an electrical field between gel electrolyte and Zn anode to suppress Zn dendrite growth. Besides, the −COO⁻ groups in PAM-SC can fix H₂O molecules, which prevents water from freezing and evaporating. The polarized PAM-SC hydrogel delivers a high ionic conductivity of 324.68 mS cm⁻¹ and water retention of 96.85 % after being exposed for 96 h. FZABs with the PAM-SC gel electrolyte exhibit long cycling life of 700 cycles at −40 °C, showing the application prospect under extreme conditions.     

Catalytic Chemistry Derived Artificial Solid Electrolyte Interphase for Stable Lithium Metal Anodes Working at 20 mA cm−2 and 20 mAh cm−2

A stable solid electrolyte interphase (SEI) layer is crucial for lithium metal anode (LMA) to survive in long-term cycling. However, chaotic structures and chemical inhomogeneity of natural SEI make LMA suffering from exasperating dendrite growth and severe electrode pulverization, which hinder the practical application of LMAs. Here, we design a catalyst-derived artificial SEI layer with an ordered polyamide-lithium hydroxide (PA-LiOH) bi-phase structure to modulate ion transport and enable dendrite-free Li deposition. The PA-LiOH layer can substantially suppress the volume changes of LMA during Li plating/stripping cycles, as well as alleviate the parasitic reactions between LMA and electrolyte. The optimized LMAs demonstrate excellent stability in Li plating/stripping cycles for over 1000 hours at an ultra-high current density of 20 mA cm⁻² in Li||Li symmetric cells. A high coulombic efficiency up to 99.2 % in Li half cells in additive-free electrolytes is achieved even after 500 cycles at a current density of 1 mA cm⁻² with a capacity of 1 mAh cm⁻².     

Designing Solid Electrolyte Interfaces towards Homogeneous Na Deposition: Theoretical Guidelines for Electrolyte Additives and Superior High-Rate Cycling Stability

Metallic Na is a promising metal anode for large-scale energy storage. Nevertheless, unstable solid electrolyte interphase (SEI) and uncontrollable Na dendrite growth lead to disastrous short circuit and poor cycle life. Through phase field and ab initio molecular dynamics simulation, we first predict that the sodium bromide (NaBr) with the lowest Na ion diffusion energy barrier among sodium halogen compounds (NaX, X=F, Cl, Br, I) is the ideal SEI composition to induce the spherical Na deposition for suppressing dendrite growth. Then, 1,2-dibromobenzene (1,2-DBB) additive is introduced into the common fluoroethylene carbonate-based carbonate electrolyte (the corresponding SEI has high mechanical stability) to construct a desirable NaBr-rich stable SEI layer. When the Na||Na₃V₂(PO₄)₃ cell utilizes the electrolyte with 1,2-DBB additive, an extraordinary capacity retention of 94 % is achieved after 2000 cycles at a high rate of 10 C. This study provides a design philosophy for dendrite-free Na metal anode and can be expanded to other metal anodes.     

EC modified PEO/PVDF-LLZO composite electrolytes for solid state lithium metal batteries

The polymer-ceramic composite electrolytes have great application potential for next-generation solid state lithium batteries, as they have the merits to eliminate the problem of liquid organic electrolytes and enhancing chemical/electrochemical stability. However, polymer-ceramic composite electrolytes show poor ionic conductivity, which greatly hinders their practical applications. In this work, the addition of plasticizer ethylene carbonate (EC) into polymer-ceramic composite electrolyte for lithium batteries effectively promotes the ionic conductivity. A high ionic conductivity can be attained by adding 40 wt% EC to the polyethylene oxide (PEO)/polyvinylidene fluoride (PVDF)-Li₇La₃Zr₂O₁₂ (LLZO) based polymer-ceramic composite electrolytes, which is 2.64 × 10⁻⁴ S cm⁻¹ (tested at room temperature). Furthermore, the cell assembled with lithium metal anode, this composite electrolyte, and LiFePO₄ cathode can work more than 80 cycles at room temperature (tested at 0.2 C). The battery delivers a high reversible specific capacity after 89 cycles, which is 119 mAh g⁻¹.     

Graphene-Enabled Electric-Field Regulation and Ionic Redistribution Around Lithiophilic Aurum Nanoparticles Toward a Dendrite-Free and 2000-Cycle-Life Lithium Metal Battery

Lithium metal batteries (LMBs) have attracted extensive attention owing to their high energy density. However, the uncontrolled volume changes and serious dendrite growth of the Li metal anode have hindered their commercialization. Herein, a three-dimensional Cu foam decorated with Au nanoparticles and conformal graphene layer was designed to tune the Li plating/stripping behaviors. The 3D−Cu conductive host anchored by lithiophilic Au nanoparticles can effectively alleviate the volume expansion caused by the continuous plating/stripping of Li and reduce the nucleation energy barrier. Notably, the conductive graphene not only facilitates the transfer of electrons, but also acts as an ionic rectifier, thereby avoiding the aggregation of local current density and Li⁺ ions around Au nanoparticles and enabling the uniform Li⁺ flux. As a result, the G−Au@3D−Cu/Li anode ensures the non-dendritic and homogeneous Li⁺ plating/stripping. Electrochemical results show that the symmetric G−Au@3D−Cu/Li cell delivers a low voltage hysteresis of 110 mV after 1000 h at 1 mA cm⁻². Matched with a layered LiNi_0.6Co_0.2Mn_0.2O₂ cathode, the NCM622||G−Au@3D−Cu/Li full cell exhibits a long cycle life of 2000 cycles and an ultra-low capacity decay rate (0.01 % per cycle).     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Inorganic–Organic Hybrid Multifunctional Solid Electrolyte Interphase Layers for Dendrite-Free Sodium Metal Anodes

Constructing a stable and robust solid electrolyte interphase (SEI) is crucial for achieving dendrite-free sodium metal anodes and high-performance sodium batteries. However, maintaining the integrity of SEI during prolonged cycle life under high current densities poses a significant challenge. In this study, we propose an integrated multifunctional SEI layer with inorganic/organic hybrid construction (IOHL−Na) to enhance the durability of sodium metal anode during reduplicative plating/stripping processes. The inorganic components with high mechanical strength and strong sodiophilicity demonstrate optimized ionic conduction efficiency and dendrite inhibition ability. Simultaneously, the organic component contributes to the formation of a dense and elastic membrane structure, preventing fracture and delamination issues during volume fluctuations. The symmetrical batteries of IOHL−Na achieve stable cycling over 2000 hours with an extremely low voltage hysteresis of around 15.8 mV at a high current density of 4 mA cm⁻². Moreover, the Na−O₂ batteries sustain exceptional long-term stability and impressive capacity retention, exploiting a promising approach for constructing durable SEI and dendrite-free sodium metal anodes.     

High ionic conductive protection layer on Zn metal anode for enhanced aqueous zinc-ion batteries

Aqueous zinc-ion batteries (ZIBs) has been regarded as a promising energy storage system for large-scale application due to the advantages of low cost and high safety. However, the growth of Zn dendrite, hydrogen evolution and passivation issues induce the poor electrochemical performance of ZIBs. Herein, a Na₃Zr₂Si₂PO₁₂ (NZSP) protection layer with high ionic conductivity of 2.94 mS/cm on Zn metal anode was fabricated by drop casting approach. The protection layer prevents Zn dendrites formation, hydrogen evolution as well as passivation, and facilitates a fast Zn²⁺ transport. As a result, the symmetric cells based on NZSP-coated Zn show a stable cycling over 1360 h at 0.5 mA/cm² with 0.5 mAh/cm² and 1000 h even at a high current density of 5 mA/cm² with 2 mAh/cm². Moreover, the full cells combined with V₂O₅-based cathode displays high capacities and high rate capability. This work offers a facile and effective approach to stabilizing Zn metal anode for enhanced ZIBs.     

Locally Concentrated Ionic Liquid Electrolytes Enabling Low-Temperature Lithium Metal Batteries

Lithium metal is a promising anode material for next-generation high-energy-density batteries but suffers from low stripping/plating Coulombic efficiency and dendritic growth particularly at sub-zero temperatures. Herein, a poorly-flammable, locally concentrated ionic liquid electrolyte with a wide liquidus range extending well below 0 °C is proposed for low-temperature lithium metal batteries. Its all-anion Li⁺ solvation and phase-nano-segregation solution structure are sustained at low temperatures, which, together with a solid electrolyte interphase rich in inorganic compounds, enable dendrite-free operation of lithium metal anodes at −20 °C and 0.5 mA cm⁻², with a Coulombic efficiency of 98.9 %. As a result, lithium metal batteries coupling thin lithium metal anodes (4 mAh cm⁻²) and high-loading LiNi_0.8Co_0.15Al_0.05O₂ cathodes (10 mg cm⁻²) retain 70 % of the initial capacity after 100 cycles at −20 °C. These results, as a proof of concept, demonstrate the applicability of locally concentrated ionic liquid electrolytes for low-temperature lithium metal batteries.     

Polyoxometalates-Based Metal–Organic Frameworks Made by Electrodeposition and Carbonization Methods as Cathodes and Anodes for Asymmetric Supercapacitors

Hybrid materials have obtained well-deserved attention for energy storage devices, because they show high capacitances and high energy densities induced by the synergistic effect between complementary components. Polyoxometalate-based metal–organic frameworks (POMOFs) possess the abundant redox-active sites and ordered structures of polyoxometalates (POMs) and metal–organic frameworks (MOFs), respectively. Here, an asymmetric supercapacitor (ASC) NENU-5/PPy/60//FeMo/C was fabricated in which both its electrodes are prepared from POMOF precursors. A typical POMOF material, NENU-5, was first connected with polypyrrole (PPy) through electrodeposition to form the cathode material NENU-5/PPy. Another representative POMOFs material, PMo₁₂@MIL-100, was carbonized to obtain the anode material FeMo/C. Cathode NENU-5/PPy exhibited an extraordinary capacitance of 508.62 F g⁻¹ (areal capacitance: 2034.51 mF cm⁻²). In addition, anode FeMo/C shows excellent cyclic stability attributed to its unique structure. Finally, benefiting from the outstanding capacitances and structural merits of the anode and cathode, assembled asymmetric supercapacitor NENU-5/PPy/60//FeMo/C achieves an energy density of 1.12 mWh cm⁻³ at a power density output of 27.78 mW cm⁻³, as well as a notable life of 10 000 cycles with an capacity retention of 80.62 %. Thus, the unique ASC is strongly competitive in high capacitance, long cycle life, and high energy-required energy storage devices.     

Surface-tuned two-dimension MXene scaffold for highly reversible zinc metal anode

Zinc metal has aroused increasing interest as anode material of Zn-based batteries for their energy storage application. However, the uneven Zn stripping/plating processes induce severe dendrite growth, leading to low Coulombic efficiency and safety hazards. Herein, a surface-tuned two-dimensional (2D) MXene Ti₃C₂T_x scaffold as a robust skeleton is developed to facilitate the uniform Zn stripping/plating. The Ti₃C₂T_x with high electrical conductivity and unique structure provides fast ionic-transport paths, promising even Zn²⁺ stripping/plating processes. With suppressed Zn dendrite growth and uniform nucleation, the proposed 2D Ti₃C₂T_x scaffold for Zn metal anode delivers a low voltage hysteresis of 63 mV and long lifespan over 280 h. This surface-tuned engineering strategy demonstrates the potential application of Zn anode with MXene skeleton for next-generation Zn-based batteries.