Highly Proton-Conductive Zinc Metal-Organic Framework Based On Nickel(II) Porphyrinylphosphonate

The design of new solid-state proton-conducting materials is a great challenge for chemistry and materials science. Herein, a new anionic porphyrinylphosphonate-based MOF ( IPCE-1Ni ), which involves dimethylammonium (DMA) cations for charge compensation, is reported. As a result of its unique structure, IPCE-1Ni exhibits one of the highest value of the proton conductivity among reported proton-conducting MOF materials based on porphyrins (1.55×10⁻³ S cm⁻¹ at 75 °C and 80 % relative humidity).     

Two Novel Three-Dimensional Tetraphenylethylene-Based Rare Earth MOFs with Ultra-High Proton Conductivity and Performance Stability

In this work, the two example rare earth-based metal-organic frameworks (La^III-based MOFs), Eu-ETTB and Gd-ETTB, were obtained by self-assembly. Both materials showed extremely high proton conductivity, with the proton conductivity of Eu-ETTB being 1.53×10⁻² S cm⁻¹ at 98 % relative humidity (RH) and 85 °C and that of Gd-ETTB being 2.63×10⁻² S cm⁻¹ at 98 % RH and 75 °C. This was almost the best performance observed for three-dimensional porous MOFs without post-synthetic modification and was based on milder conditions than for most materials. Furthermore, cycle test experiments and continuous work tests showed that both materials had excellent performance both in terms of stability and durability. Water vapor adsorption experiments showed that a large number of water molecules are adsorbed the hydrogen-bond network's being rebuilt by the adsorbed water molecules in the pore channel and thus optimizing the channels for proton transfer explained the MOF's high performance.     

Superhigh intrinsic proton conductivity in densely carboxylic covalent organic framework

Herein, we developed for the first time two carboxylic acid based intrinsic proton conductors (COOH-COF-1 and COOH-COF-2) via pre-assembly approach. The obtained COOH-COF-1 and COOH-COF-2 not only show outstanding chemical and thermal stabilities, but also exhibit superhigh intrinsic proton conductive behaviors. Especially, the intrinsic proton conductivity of COOH-COF-2 is up to 2.6 × 10⁻³ S/cm at 353 K and 98% RH, which is the highest value among all the reported acid functionalized COFs. This work lights up the way for the rational design of functional COFs with remarkably intrinsic proton conducting performance and related practical applications.     

Chitosan‐based composite membranes containing chitosan‐coated carbon nanotubes for polymer electrolyte membranes

Considering the poor dispersion and inert ionic conduction ability of carbon nanotubes (CNTs), functionalization of CNTs is a critical issue for their application in polymer electrolyte membranes. Herein, CNTs were functionalized by the polyelectrolyte, chitosan (CS), via a facile noncovalent surface‐deposition method. The obtained CS‐coated CNTs (CS@CNTs) were then incorporated into the CS matrix and fabricated composite membranes. The CS coating can enhance the compatibility between CNTs and the matrix, thus ensuring the homogenous dispersion of CS@CNTs and effectively improved the mechanical properties of the composites. Moreover, the CS coating can make CS@CNTs act as an additional proton‐conducting pathway through the membranes. The CS/CS@CNTs‐1 composite shows the highest proton conductivity of 3.46 × 10⁻² S cm⁻¹ at 80°C, which is about 1.5‐fold of the conductivity of pure CS membrane. Consequently, the single cell equipped with CS/CS@CNTs‐1 membrane exhibits a peak power density of 47.5 mW cm⁻², which is higher than that of pure CS (36.1 mW cm⁻²).     

Modification of proton conductive polymer membranes with phosphonated polysilsesquioxanes

New hybrid membranes for fuel cell applications based on sulfonated poly(ether ether ketone) (SPEEK) and phosphonated polysilsesquioxanes were synthesized. The impedance spectroscopy measurements show an increase of the proton conductivity for all studied composites, in comparison to plain SPEEK. For hybrid membranes containing 20 wt% of polysilsesquioxane with 80 mol% of phosphonated units the conductivities can reach values that are similar to Nafion 117^® at 100% RH. The best results of proton conductivity (142 mS/cm) were obtained for composites with 40 wt% of the same polysilsesquioxane at 120 °C also at 100% RH.     

Optimal method for preparing sulfonated polyaryletherketones with high ion exchange capacity by acid-catalyzed crosslinking for proton exchange membrane fuel cells

Sulfonated polyaryletherketones (SPAEK) bearing four sulfonic acid groups on the phenyl side groups were synthesized. The benzophenone moiety of polymer backbone was further reduced to benzydrol group with sodium borohydride. The membranes were crosslinked by acid-catalyzed Friedel-Crafts reaction without sacrifice of sulfonic acid groups and ion exchange capacity (IEC) values. Crosslinked membranes with the same IEC value but different water uptake could be prepared. The optimal crosslinking condition was investigated to achieve lower water uptake, better chemical stability (Fenton's test), and higher proton conductivity. In addition, the hydrophilic ionic channels from originally course and disordered could be modified to be narrow and continuous by this crosslinking method. The crosslinked membranes, CS4PH-40-PEKOH (IEC = 2.4 meq./g), reduced water uptake from 200 to 88% and the weight loss was reduced from 11 to 5% during the Fenton test compared to uncrosslinked one (S4PH-40-PEK). The membrane showed comparable proton conductivity (0.01–0.19 S/cm) to Nafion 212 at 80°C from low to high relative humidity (RH). Single H₂/O₂ fuel cell based on the crosslinked SPAEK with catalyst loading of 0.25 mg/cm² (Pd/C) exhibited a peak power density of 220.3 mW/cm², which was close to that of Nafion 212 (214.0 mW/cm²) at 80°C under 53% RH. These membranes provide a good option as proton exchange membrane with high ion exchange capacity for fuel cells.     

Proton conductivity of nanoporous anatase xerogels prepared by a particulate sol–gel method

Nanoporous anatase xerogels were prepared via particulate sol–gel processes. The calcined xerogels were mesoporous, with a BET surface area of 121 m²/g, an average pore diameter of 5.8 nm and a pore volume of 0.236 cc/g. Proton conductivity of the membranes was measured as a function of temperature and relative humidity (RH). When anatase membranes are treated at pH 1.5, the proton conductivity increased in the whole range of temperature and RH. It indicates that the surface site density (number of water molecules per square nanometer) of these materials has a strong effect on conductivity. The proton conductivity of the studied anatase xerogels followed an Arrhenius-like dependence on the temperature (from room temperature to 90°C), in both treated and untreated membranes. A sigmoidal dependence of the conductivity on the RH was observed with the greatest increase noted between 58% and 81% RH in both treated and untreated anatase membranes. The highest value of proton conductivity was found to be 0.015 S/cm at 90°C and 81% RH, for treated anatase ceramic membranes. An increase in the conductivity could be achieved by means of longer times of treatment. According to the activation energy values, proton migration in this kind of materials could be dominated by the Grotthuss mechanism in the whole range of RH. The similar values of proton conductivity, lower cost and higher hydrophilicity of these membranes make them potential substitutes for perfluorosulfonic polymeric membranes in proton exchange membrane fuel cells (PEMFCs). Presented at the conference Solid State Chemistry 2004, September 13–17, Prague, Czech Republic     

Proton Conductivities of Graphene Oxide Nanosheets: Single,Multilayer, and Modified Nanosheets

Proton conductivities of layered solid electrolytes can be improved by minimizing strain along the conduction path. It is shown that the conductivities (σ) of multilayer graphene oxide (GO) films (assembled by the drop‐cast method) are larger than those of single‐layer GO (prepared by either the drop‐cast or the Langmuir‐Blodgett (LB) method). At 60 % relative humidity (RH), the σ value increases from 1×10⁻⁶ S cm⁻¹ in single‐layer GO to 1×10⁻⁴ and 4×10⁻⁴ S cm⁻¹ for 60 and 200 nm thick multilayer films, respectively. A sudden decrease in conductivity was observed for with ethylenediamine (EDA) modified GO (enGO), which is due to the blocking of epoxy groups. This experiment confirmed that the epoxide groups are the major contributor to the efficient proton transport. Because of a gradual improvement of the conduction path and an increase in the water content, σ values increase with the thickness of the multilayer films. The reported methods might be applicable to the optimization of the proton conductivity in other layered solid electrolytes.     

Failure-Experiment-Supported Optimization of Poorly Reproducible Synthetic Conditions for Novel Lanthanide Metal-Organic Frameworks with Two-Dimensional Secondary Building Units**

Novel metal–organic frameworks containing lanthanide double-layer-based secondary building units (KGF-3) were synthesized by using machine learning (ML). Isolating pure KGF-3 was challenging, and the synthesis was not reproducible because impurity phases were frequently obtained under the same synthetic conditions. Thus, dominant factors for the synthesis of KGF-3 were identified, and its synthetic conditions were optimized by using two ML techniques. Cluster analysis was used to classify the obtained powder X-ray diffractometry patterns of the products and thus automatically determine whether the experiments were successful. Decision-tree analysis was used to visualize the experimental results, after extracting factors that mainly affected the synthetic reproducibility. Water-adsorption isotherms revealed that KGF-3 possesses unique hydrophilic pores. Impedance measurements demonstrated good proton conductivities (σ=5.2×10⁻⁴ S cm⁻¹ for KGF-3(Y)) at a high temperature (363 K) and relative humidity of 95 % RH.     

Preparation and characterization of conductive chitosan–ionic liquid composite membranes

Anhydrous conductive membranes composing of a composite of chitosan (CS) and ionic liquids with symmetrical carboxyl groups were explored. Scanning electron microscope images revealed that porous composite membranes could be obtained by combining CS with different amounts of 1,4‐bis(3‐carboxymethyl‐imidazolium)‐1‐yl butane chloride ([CBIm]Cl). Fourier transform infrared and proton nuclear magnetic resonance confirmed that the formation of ammonium salts after CS was combined with [CBIm]Cl. The thermal property of CS–ionic liquid composite membranes was studied through thermogravimetric analysis. The anhydrous ionic conductivities of CS–[CBIm]X (X = Cl, Ac, BF₄, and I) composite membranes were measured using ac impedance spectroscopy at room temperature in N₂ atmosphere. The conductivities (0.4–0.7 × 10^?4 Scm^?1), found to be in the same range as semiconductors, were significantly higher than those of pure CS membrane (<10^?8 Scm^?1). In addition, the anhydrous conductivity of composite membrane based on CS–[CBIm]I at room temperature reached a level as high as 0.91 × 10^?2 Scm^?1 when iodine was doped. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication of Ultrathin Membranes Using 2D-MOF Nanosheets for Tunable Gas Separation

Two-dimensional (2D) metal-organic frameworks (MOF) nanosheets have emerged as novel membrane materials for gas separation. However, the development of ultrathin MOF membranes with tunable separation performances is still a challenge. Herein, we developed a facile GO-assisted restacking method to fabricate defect-free membranes with monolayer Zr-BTB nanosheets. Obtained ultrathin membranes ranging from 130 nm to 320 nm show tunable separation performances and exceed the 2008 Robeson upper bound by changing the amount of nanolayers in vertical stacking direction. Furthermore, a heating filtration method was used to change the restacking process of nanosheets in the horizontal direction. As a result, H₂/CO₂ selectivity can be enhanced by two times with the same membrane thickness (130 nm) and H₂ permeance is almost maintained to be 7.0×10⁻⁷ mol m⁻² s⁻¹ pa⁻¹. This method may provide a possible way to efficiently tune the gas separation performances of MOF membranes.     

Alternative proton-conducting electrolytes and their electrochemical performances

This study was focused on the performances of membrane electrode assemblies (MEAs) consisting of the proton–conducting 90PVA/3PWA/4GPTMS/1P₂O₅/2Gl and 80PVA/10PWA/6GPTMS/2P₂O₅/2Gl hybrid membranes as electrolytes together with a Pt/C electrode for proton exchange membrane fuel cells. The MEAs were fabricated and tested as a function of temperature and humidity, and yielded a current density value of about 350?mA?cm^?2 at 60?°C and 100% relative humidity (RH) for the membrane electrolyte 80PVA/10PWA/6GPTMS/2P₂O₅/2Gl. These values were compared with Nafion? membranes, and the single-cell performances based on proton-conducting organic/inorganic hybrid electrolytes were discussed. The test conditions employed were equivalent for each MEA that had an active area of 5?cm². These hybrid membranes showed a high proton conductivity in the range of 10^?3–10^?2 S cm^?1 at low temperatures, i.e., 60, 80, and 90?°C, and 50%, 75%, and 100% RH.     

Copoly(arylene ether nitrile) and copoly(arylene ether sulfone) ionomers with pendant sulfobenzoyl groups for proton conducting fuel cell membranes

Three series of fully aromatic ionomers with naphthalene moieties and pendant sulfobenzoyl side chains were prepared via K₂CO₃ mediated nucleophilic aromatic substitution reactions. The first series consisted of poly(arylene ether)s prepared by polycondensations of 2,6‐difluoro‐2′‐sulfobenzophenone (DFSBP) and 2,6‐dihydroxynaphthalene or 2,7‐dihydroxynaphthalene (2,7‐DHN). In the second series, copoly(arylene ether nitrile)s with different ion‐exchange capacities (IECs) were prepared by polycondensations of DFSBP, 2,6‐difluorobenzonitrile (DFBN), and 2,7‐DHN. In the third series, bis(4‐fluorophenyl)sulfone was used instead of DFBN to prepare copoly(arylene ether sulfone)s. Thus, all the ionomers had sulfonic acid units placed in stable positions close to the electron withdrawing ketone link of the side chains. Mechanically strong proton‐exchange membranes with IECs between 1.1 and 2.3 meq g⁻¹ were cast from dimethylsulfoxide solutions. High thermal stability was indicted by high degradation temperatures between 266 and 287 °C (1 °C min⁻¹ under air) and high glass transition temperatures between 245 and 306 °C, depending on the IEC. The copolymer membranes reached proton conductivities of 0.3 S cm⁻¹ under fully humidified conditions. At IECs above ∼1.6 meq g⁻¹, the copolymer membranes reached higher proton conductivities than Nafion^® in the range between −20 and 120 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Two Molecular Hybrids Based on Typical or Decorated Poly-Keggin-Anion Chains: Syntheses, Structures, and Proton-Conductivities

Two proton-conductive molecular hybrids were constructed by introducing protonated water clusters, alkaline-earth metal ions and [PMo₁₂O₄₀]^3? anions in the gallery of H-bonding networks based on isonicotinic acid N-oxide. Single-crystal X-ray diffraction analyses at 293?K revealed that two complexes crystallized in the orthorhombic space group Pnnm, exhibited very close unit cell parameters, and presented similar three-dimensional hydrogen-bonded networks with large one-dimensional (1D) channels. Interestingly, typical or decorated poly-Keggin-anion chains are formed in the 1D channels. Surprisingly, the proton conductivities of two complexes in the temperature range of 85?C100?°C under 98% RH conditions reached good proton conductivities of 10^?3?S?cm^?1. A possible mechanism of the proton conduction was proposed according to the experimental results.     

Synthesis and properties of novel sulfonated (co)polyimides bearing sulfonated aromatic pendant groups for PEFC applications

Novel sulfonated diamines bearing aromatic pendant groups, namely, 3,5‐diamino‐3′‐sulfo‐4′‐(4‐sulfophenoxy) benzophenone (DASSPB) and 3,5‐diamino‐3′‐sulfo‐4′‐(2,4‐disulfophenoxy) benzophenone (DASDSPB), were successfully synthesized. Novel side‐chain‐type sulfonated (co)polyimides (SPIs) were synthesized from these two diamines, 1,4,5,8‐naphthalene tetracarboxylic dianhydride (NTDA) and nonsulfonated diamines such as 4,4′‐bis(3‐aminophenoxy) phenyl sulfone (BAPPS). Tough and transparent membranes of SPIs with ion exchange capacity of 1.5–2.9 meq g^?1 were prepared. They showed good solubility and high thermal stability up to 300 °C. They showed isotropic membrane swelling in water, which was different from the main‐chain‐type and sulfoalkoxy‐based side‐chain‐type SPIs. The relative humidity (RH) and temperature dependence of proton conductivity were examined. At low RH, the novel SPI membranes showed much higher conductivity than the sulfoalkoxy‐based SPIs. They showed comparable or even higher proton conductivity than Nafion 112 in water at 60 °C (>0.10 S cm^?1). The membrane of NTDA‐DASDSPB/BAPPS (1/1)‐s displayed reasonably high proton conductivities of 0.05 and 0.30 S cm^?1 at 50 and 100% RH, respectively, at 120 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2862–2872, 2006     

Highly proton conducting proton‐exchange membranes based on fluorinated poly(arylene ether ketone)s with octasulfonated segments

A new bisphenol monomer containing a pair of electron‐rich tetra‐arylmethane units was designed and synthesized. Based on this monomer, along with commercial 4,4′‐(hexafluoroisopropylidene)diphenol A and 4,4′‐difluorobenzophenone, a series of novel poly(arylene ether ketone)s containing octasulfonated segments of varying molar percentage (x) (6F‐SPAEK‐x) were successfully synthesized by polycondensation reactions, followed by sulfonation. Tough, flexible, and transparent membranes, exhibiting excellent thermal stabilities and mechanical properties were obtained by casting. 6F‐SPAEK‐x samples exhibited appropriate water uptake and swelling ratios at moderate ion exchange capacities (IECs) and excellent proton conductivities. The highest proton conductivity (215 mS cm⁻¹) is observed for hydrated 6F‐SPAEK‐15 (IEC = 1.68 meq g⁻¹) at 100 °C, which is more than 1.5 times that of Nafion 117. Furthermore, the 6F‐SPAEK‐10 membrane exhibited comparable proton conductivity (102 mS cm⁻¹) to that of Nafion 117 at 80 °C, with a relatively low IEC value (1.26 meq g⁻¹). Even under 30% relative humidity, the 6F‐SPAEK‐20 membrane (2.06 meq g⁻¹) showed adequate conductivity (2.1 mS cm⁻¹) compared with Nafion 117 (3.4 mS cm⁻¹). The excellent comprehensive properties of these membranes are attributed to well‐defined nanophase‐separated structures promoted by strong polarity differences between highly ionized and fluorinated hydrophobic segments. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 25–37     

Two‐Dimensional Metal–Organic Framework Nanosheets for Membrane‐Based Gas Separation

Metal–organic framework (MOF) nanosheets could serve as ideal building blocks of molecular sieve membranes owing to their structural diversity and minimized mass‐transfer barrier. To date, discovery of appropriate MOF nanosheets and facile fabrication of high performance MOF nanosheet‐based membranes remain as great challenges. A modified soft‐physical exfoliation method was used to disintegrate a lamellar amphiprotic MOF into nanosheets with a high aspect ratio. Consequently sub‐10 nm‐thick ultrathin membranes were successfully prepared, and these demonstrated a remarkable H₂/CO₂ separation performance, with a separation factor of up to 166 and H₂ permeance of up to 8×10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ at elevated testing temperatures owing to a well‐defined size‐exclusion effect. This nanosheet‐based membrane holds great promise as the next generation of ultrapermeable gas separation membrane.     

Bimetallic Anionic Organic Frameworks with Solid-State Cation Conduction for Charge Storage Applications

A new phosphonate-based anionic bimetallic organic framework, with the general formula of A₄−Zn−DOBDP (wherein A is Li⁺ or Na⁺, and DOBDP⁶⁻ is the 2,5-dioxido-1,4-benzenediphosphate ligand) is prepared and characterized for energy storage applications. With four alkali cations per formula unit, the A₄−Zn−DOBDP MOF is found to be the first example of non-solvated cation conducting MOF with measured conductivities of 5.4×10⁻⁸ S cm⁻¹ and 3.4×10⁻⁸ S cm⁻¹ for Li₄- and Na₄- phases, indicating phase and composition effects of Li⁺ and Na⁺ shuttling through the channels. Three orders of magnitude increase in ionic conductivity is further attained upon solvation with propylene carbonate, placing this system among the best MOF ionic conductors at room temperature. As positive electrode material, Li₄−Zn−DOBDP delivers a specific capacity of 140 mAh g⁻¹ at a high average discharge potential of 3.2 V (vs. Li⁺/Li) with 90 % of capacity retention over 100 cycles. The significance of this research extends from the development of a new family of electroactive phosphonate-based MOFs with inherent ionic conductivity and reversible cation storage, to providing elementary insights into the development of highly sought yet still evasive MOFs with mixed-ion and electron conduction for energy storage applications.     

A Rare 2D Framework Cu(atz)2 with Ferrimagnetic and High Proton Conductivity

Materials combining proton conductivity and magnetism have attracted great attention in recent years due to their intriguing application in sensors and fuel cells. Herein a two-dimensional metal-organic framework, [Cu(atz)₂(H₂O)₂]⋅H₂O ( 1 ) (Hatz=5-aminotetrazole), has been obtained in a green synthesis method. The single-crystal structure revealed that the atz⁻ ligands as linkers coordinate with copper ions to sql networks, between which water molecules are immobilized through hydrogen bonds. The resulting complex 1 exhibits a high proton conductivity of 1.11×10⁻⁴ and 6.19×10⁻⁴ S cm⁻¹ at room temperature and 333 K, respectively, under 98% RH with an activation energy of 0.56 eV. Upon dehydration, the proton conductivity of 1_dg drops by an order of magnitude. Furthermore, the magnetic behavior changes from long-range ferrimagnetic ordering of 1 to canted antiferromagnetic behaviour of 1_dg .     

Preparation of novel sulfonated block copolyimides for proton conductivity membranes

In this article novel sulfonated block copolyimides with various diamine compositions and block chain lengths were synthesized by chemical imidization using a two‐pot procedure. The proton conductivities of the block copolyimide membranes were measured as functions of the relative humidity and temperature using four‐point‐probe electrochemical impedance spectroscopy. The proton conductivity of the membranes strongly depended on the block chain lengths and increased with an increase in the block chain lengths. The proton conductivity of NTDA‐BDSA‐b‐6FAP (112/48) as the block copolyimide membrane was approximately 0.35 S cm⁻¹ which indicated a higher value when compared to that determined for Nafion®. Copyright © 2005 John Wiley & Sons, Ltd.