Preparation and characterization of copper/polysulfonamide complex immobilized on geraphene oxide as a novel catalyst for the synthesis of pyrimido[1,2-a]benzimidazoles

Copper–polysulfonamide complex immobilized on geraphene oxide as a novel heterogeneous catalyst (GO@PSA-Cu) was synthesized and the structure and morphology of catalyst were characterized with various analytical techniques such as Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray, N₂ isotherms, elemental mapping, inductively coupled plasma–MS, and thermogravimetric analysis. The GO@PSA-Cu catalyst demonstrated good to excellent yields for the synthesis new derivatives of pyrimido[1,2-a]benzimidazoles via one-pot three-component condensation reaction of various aromatic aldehydes, 2-aminobenzimidazole, and ethyl acetoacetate in ethanol. The method presented herein has several prominent advantages such as cost-effectiveness, operational simplicity, short reaction times, high yields, and reusability of the catalyst even after six consecutive runs.     

Novel organometallic nanomagnetic catalyst for multicomponent synthesis of spiroindoline derivatives

A novel, green, reusable polyaniline (PANI)/Fe₃O₄/carbon nanotube (CNT) nanomagnetic catalyst has been prepared, characterized by Fourier-transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD) analysis, and applied for four-component synthesis of spiro[indoline-3,4′-pyrano[2,3-c]pyrazole] derivatives from isatin, hydrazine hydrate or phenylhydrazine, ethyl acetoacetate, and malononitrile or ethyl cyanoacetate in aqueous medium at room temperature. Use of water as safe and environmentally benign solvent, short reaction time, high product yield, easy workup procedure, and easy separation and reusability of the catalyst are noteworthy advantages of this approach.     

CeO2/CuO@N-GQDs@NH2 nanocomposite as a high-performance catalyst for the synthesis of benzo[g]chromenes

A three-component reaction of aromatic aldehydes, malononitrile or ethyl cyanoacetate and 2-hydroxy-1,4-naphthaquinone has been achieved in the presence of an amino-functionalized CeO₂/CuO@ nitrogen graphene quantum dot nanocomposite as a highly effective heterogeneous catalyst to produce benzo[g]chromenes. The catalyst has been characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, energy-dispersive X-ray spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller (BET) and vibrating sample magnetometry. This new catalyst has been demonstrated to be highly effective in the preparation of benzo[g]chromenes.     

Effective one-pot synthesis of tetrahydrobenzo[b]pyran derivatives using nickel Schiff-base complex immobilized on iron oxide nanoparticles

Nickel Schiff-base complex immobilized on silica-coated Fe₃O₄ as a heterogeneous catalyst was designed and characterized by different techniques, such as Fourier transform infrared (FT-IR), X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), inductively coupled plasma (ICP) and vibrating sample magnetometry (VSM) thermogravimetric analysis (TGA), and Brunauer–Emmett–Teller (BET). The synthesized nanocatalyst has been explored as a new and efficient recyclable heterogeneous catalyst for the one-pot three-component synthesis of tetrahydrobenzo[b]pyran derivatives. The reaction proceeds smoothly to supply the respective products in excellent yields and low reaction times. The catalyst can be easily recovered by a magnetic field and reused for eight consecutive reaction cycles without significant loss of activity.     

Synthesis,characterization and application of Fe3O4@SiO2@CPTMO@DEA-SO3H nanoparticles supported on bentonite nanoclay as a magnetic catalyst for the synthesis of 1,4-dihydropyrano[2,3-c]pyrazoles

Fe₃O₄ nanoparticles were prepared and decorated on the surface of nanobentonite (NB), and subsequently modified by the organic and inorganic linkers and then sulfonic acid immobilization on the nanoparticles. The NB-Fe₃O₄@SiO₂@CPTMO@DEA-SO₃H catalyst was characterized via Fourier transform-infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, vibrating-sample magnetometer, X-ray diffraction patterns, Brunauer–Emmett–Teller and thermal gravimetric analysis. The new catalyst benefits from a simple preparation method, and environmentally friendly and high magnetic properties of the nanocatalyst, Accordingly, we used it for the synthesis of dihydropyrano[2,3c]pyrazole derivatives in water and ethanol mixture as a green solvent under reflux conditions. Use of mild conditions, easy catalyst separation, cost-effectiveness, short reaction time, reusability of the catalyst, excellent yield and easy work-up are the main advantages of the present method.     

Microstructure and microanalysis of bismuth molybdates

The microstructures of commercially important bismuth molybdate catalysts in relation to olefin oxidation reactions are examined by electron microscopy (EM) techniques. The microstructural characterization has been carried out using dynamic (in situ) EM, high resolution EM, and microanalysis. The coprecipitated catalyst system Bi₂MoO₆ or γ, together with the γ phase, contains small amounts of tetragonal Bi₂MoO₆ phase, Bi₂Mo₃O₁₂ (α phase), Bi₂O₃, and MoO₃. In reduction with propylene, at catalyst operating temperatures of 400–500°C, in the dynamic experiments conducted on α- and γ-phase crystallites under reaction conditions no evidence for extended defects such as crystallographic shear planes has been obtained, instead an ordered intermediate phase similar to (101) Bi₂Mo₂O₉ (β phase) is observed which is found to be unstable. Observations by electron microscopy have been confirmed with parallel measurements made in a reactor connected to a gas chromatograph and mass spectrometer system. The possible influence of the microstructural changes on the catalytic behavior of the system is examined.     

Preparation and characterization of nano-Co-[4-chlorophenyl-salicylaldimine-methyl pyranopyrazole]Cl2 as a new Schiff base complex and catalyst for the solvent-free synthesis of 1-amidoalkyl-2-naphthols

By the reaction of 4-chlorobenzaldehyde with ethyl acetoacetate, malononitrile, and hydrazine hydrate, 6-amino-4-(4-chlorophenyl)-3-methyl-2,4-dihydropyrano[2,3-c]pyrazole-5-carbonitrile was prepared and then reacted with salicylaldehyde and CoCl₂·6H₂O to produce nano-Co-[4-cholorophenyl-salicylaldimine-methylpyranopyrazole]Cl₂ (nano-[Co-4CSMP]Cl₂). The prepared nano-Schiff base complex was reported for the first time and fully characterized by Fourier transform-infrared spectroscopy, thermal gravimetric analysis, differential thermal gravimetric analysis, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and Brunner–Emmett–Teller analyses and applied as an efficient catalyst for the synthesis of some 1-amidoalkyl-2-naphthol derivatives.     

Synthesis and properties of bismuth oxide nanoshell coated polyaniline nanoparticles for promising photovoltaic properties

A novel heterostructure made of polyaniline (PANI) nanoparticles coated by nanolayer of bismuth oxide Bi₂O₃ was synthesized. The structure was characterized by scanning electron microscopy, X‐ray diffraction, and transmission electron microscopy. These characterizations showed that the bismuth oxide nanoshell was pure and crystalline, and has thickness in the range of 10 nm. The experiment on photoluminescence (PL) of Bi₂O₃ nanoshell coated polyaniline nanoparticle, at room temperature, shows an emission band peaked at around 385 nm. When compared with the PL spectrum of Bi₂O₃ nanoparticles, about 100 times PL enhancement was found in the PL spectrum of Bi₂O₃ nanoshell coated polyaniline nanoparticle. The current density versus voltage (J–V) measurements in dark and illumination showed that this heterojunction has 4 orders of magnitude rectification in the dark and 3 orders of magnitude rectification under illumination. The obtained power conversion efficiency of polyaniline nanoparticles coated by nanoshell of bismuth oxide (η = 7.453%) was much enhanced compared with polyaniline alone (η = 8.33 × 10^?4%) this indicates that the prepared heterostructure represents a promising photovoltaic solar cell. Copyright © 2009 John Wiley & Sons, Ltd.     

Hydrothermal Synthesis of Bismuth Sulfide (Bi2S3) Nanorods: Bismuth(III) Monosalicylate Precursor in the Presence of Thioglycolic Acid

Well-segregated bismuth sulfide (Bi₂S₃) nanorods with a high order of crystallinity have been successfully prepared from bismuth(III) monosalicylate [BiO(C₇H₅O₃)] by a simple hydrothermal reaction in H₂O at 180 °C. Bismuth(III) monosalicylate and thioglycolic acid act as the starting materials. The products were characterized by powder X-ray diffraction, Ultraviolet–Visible (UV–Vis) spectroscopy, transmission electron microscopy photoluminescence spectroscopy, and Fourier transform infrared spectra. The powder X-ray diffraction pattern shows the product belongs to the orthorhombic Bi₂S₃ phase. Their UV–Vis spectrum shows the absorbance at 328 nm, with its direct energy band gap of 2.6 eV. Bismuth salicylate, which is known to be a complex, may play a critical role as a precursor and a template for the growth of linear bismuth sulfide nanorods. Finally the influences of the reaction conditions are discussed and a possible mechanism for the formation of Bi₂S₃ nanorods is proposed.     

Preparation of a visible light-driven Bi2O3–TiO2 composite photocatalyst by an ethylene glycol-assisted sol–gel method,and its photocatalytic properties

A visible light-driven Bi₂O₃–TiO₂ composite photocatalyst was prepared by an ethylene glycol-assisted sol–gel method in which ethylene glycol acted as a polycondensation agent to capture metal ions by reacting with bismuth and titanium sources via a complex polycondensation pathway. The photocatalyst was characterized by X-ray photoelectron spectroscopy, X-ray diffraction, acquisition of N₂ adsorption–desorption isotherms, transmission electron microscopy, and UV–visible diffuse reflectance spectroscopy. The results revealed that the Bi₂O₃–TiO₂ composite was of smaller particle size, greater specific surface area, and had stronger absorbance in the visible light region than pure TiO₂. The photocatalytic activity of the as-prepared catalyst was evaluated by degradation of rhodamine B under visible light irradiation (λ > 400 nm); the as-prepared Bi₂O₃–TiO₂ composite was substantially more active than pure TiO₂. This was ascribed to the high surface area and the heterojunction structure.     

Nicotinic acid-supported cobalt ferrite-catalyzed one-pot synthesis of substituted chromeno[3,4-b]quinolines

One-pot synthesis of substituted chromeno[3,4-b]quinoline derivatives was developed by three-component reaction of aldehydes, dimedone or 1,3-cyclohexadione, and 4-aminocoumarin in the presence of nicotinic acid-supported cobalt ferrite [CoFe₂O₄@SiO₂@Si(CH₂)₃Cl@NA] as a novel magnetic catalyst in chloroform at reflux conditions. Nicotinic acid-supported cobalt ferrite was characterized via Fourier transform infrared spectroscopy, X-ray diffraction, thermal gravimetric analysis, scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, and vibrating sample magnetometry. Moreover, the catalyst could be easily recovered by magnetic separation and recycled up to five times without significant loss of its catalytic activity. The products formed in excellent yields over appropriate reaction times under environmentally friendly conditions. High efficiency and easy isolation of the catalyst from products by simple magnetic attraction are some of the considerable advantages of this procedure.     

Synthesis and characterization of a novel and green rod-like magnetic ZnS/CuFe2O4/agar organometallic hybrid catalyst for the synthesis of biologically-active 2-amino-tetrahydro-4H-chromene-3-carbonitrile derivatives

The magnetic biocompatible rod-like ZnS/CuFe₂O₄/agar organometallic hybrid catalyst was designed and prepared based on a natural macromolecule (agar) through a green and convenient method using inexpensive, nontoxic, and easily available substances. Then, the as-prepared catalyst was characterized by several techniques such as Fourier transform-infrared spectroscopy, energy-dispersive X-ray analysis, scanning electron microscopy image, transmission electron microscopy, vibrating sample magnetometry curve, X-ray diffraction pattern, and thermogravimetric analysis. Eventually, the catalytic application of the ZnS/CuFe₂O₄/agar nanobiocomposite was assessed in sequential Knoevenagel condensation–Michael addition reaction of dimedone, malononitrile, and different substituted aromatic aldehydes for the synthesis of 2-amino-tetrahydro-4H-chromene-3-carbonitrile derivatives. Some notable strengths of this environmentally benign catalyst include simplicity of catalyst preparation and separation, affording desired products with satisfactory yields (81%–97%) in very short reaction times (3–18 min), and with no need for complicated work-up processes. Experimental tests showed that the catalyst can be successfully reused after five sequential runs without significant reduction in its catalytic efficiency.     

Investigation of synthesis and microstructure of bismuth titanates with TiO<Subscript>2</Subscript> rich compositions

Preliminary examinations regarding formation of bismuth titanates in a part of Bi₂O₃—TiO₂ system rich with TiO₂ have been carried out. Bismuth titanates have been synthesized from mixtures of Bi₂O₃ and TiO₂ (anatase) by the conventional solid-state method at the temperatures ranged from 1273 to 1473 K. Differential thermal analysis (DTA), powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) have been used to study the formation of bismuth titanates. The following compounds have been achieved: Bi₄Ti₃O₁₂, Bi₂Ti₂O₇ and Bi₂Ti₄O₁₁. Existence of controversial bismuth titanate of formula Bi₂Ti₃O₉ in the Bi₂O₃—TiO₂ system has not been confirmed.     

Fe3O4@SiO2@ADMPT/H6P2W18O62: a novel Wells–Dawson heteropolyacid-based magnetic inorganic–organic nanohybrid material as potent Lewis acid catalyst for the efficient synthesis of 1,4-dihydopyridines

A novel Wells–Dawson heteropolyacid-based magnetic Inorganic–organic nanohybrid, Fe₃O₄@SiO₂@ADMPT/H₆P₂W₁₈O₆₂, was fabricated and used as a green, efficient, eco-friendly, and highly recyclable catalyst for the one-pot and multi-component synthesis of 1,4-Dihydopyridine (1,4-DHP) derivatives from the reaction of various aromatic aldehydes with ethyl acetoacetate and ammonium acetate with good to excellent yields and in a short span of time. The nanohybrid catalyst was prepared by the chemical anchoring of Wells–Dawson heteropolyacid H₆P₂W₁₈O₆₂ onto the surface of functionalized Fe₃O₄ nanoparticles with 2,4-bis(3,5-dimethylpyrazol)-triazine (ADMPT) linker. These nanocatalysts were identified by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR) and vibrating sample magnetometer (VSM). This protocol is developed as a safe, cost-effective and convenient alternate method for the synthesis of 1,4-DHP derivatives utilizing an eco-friendly, and a highly reusable catalyst.     

Preparation of benzo[4,5]thiazolo[3,2-a]chromeno[4,3-d]pyrimidin-6-one derivatives using MgO-MgAl2O4 composite nano-powder

MgO-MgAl₂O₄ nanocomposite was prepared from the co-precipitation of Mg(NO₃)₂ and Al(NO₃)₃ salts, characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and fourier transform infrared spectroscopy (FTIR) techniques and evaluated in the synthesis of thirty five derivatives of benzo[4,5]thiazolo[3,2-a]chromeno[4,3-d]pyrimidin-6-ones (d₁-d₃₄) via the multi-component reaction of 4-hydroxycoumarins, aldehydes, and 2-aminobenzothiazole derivatives under solvent free condition. The catalytic activity of MgO-MgAl₂O₄ nanocomposite and the synthesis of the above mentioned compounds were investigated under thermal solvent free (times: 1.4–3 h; yields: 75–95%), ultrasonic irradiation (US) conditions (times: 1–2.5 h; yields: 69–97%) and using high-speed ball milling (HSBM) technique (times: 0.7–2.5 h; yields: 67–97%). In all cases, the products were obtained in excellent yields. Nuclear Magnetic Resonance (NMR) and MASS spectroscopy were used to characterize the structure of the desired product. The mechanism for the preparation of compounds d₁-d₃₄ was proposed and confirmed by ¹H NMR investigations.     

Glycolic acid-supported cobalt ferrite-catalyzed one-pot synthesis of pyrimido[4,5-b]quinoline and indenopyrido[2,3-d]pyrimidine derivatives

Herein, one-pot synthesis of pyrimido[4,5-b]quinoline and indenopyrido[2,3-d]pyrimidine derivatives was developed by the three-component reaction of aldehydes, 6-amino-1,3-dimethyluracil, and 1,3-dicarbonyl compounds in the presence of glycolic acid-supported cobalt ferrite CoFe₂O₄@SiO₂@Si (CH₂)₃NHCOOCH₂COOH as a novel magnetic catalyst in ethanol at reflux conditions. Glycolic acid-supported cobalt ferrite was characterized via Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and vibrating sample magnetometer (VSM). Moreover, the catalyst was easily recovered with magnetic separation and recycled at least for five times without significant loss of its catalytic activity. The products were formed in excellent yields over appropriate reaction times under environmentally friendly conditions. The high efficiency and easy isolation of catalyst from products with an external permanent magnet are some of the remarkable advantages of this method.     

Phosphorus modified MoO<Subscript>3</Subscript>–Bi<Subscript>2</Subscript>SiO<Subscript>5</Subscript>/SiO<Subscript>2</Subscript> catalyst for gas-phase epoxidation of propylene by molecular oxygen

The phosphorus (P) modified MoO₃–Bi₂SiO₅/SiO₂ catalyst was prepared by a simple co-impregnation method and investigated in the epoxidation of propylene by molecular oxygen. The catalyst was characterized by X-ray diffraction (XRD), N₂ adsorption–desorption analysis, NH₃-temperature-programmed desorption (NH₃-TPD), transmission electron microscopy, and Raman spectroscopy. It was found that the P-modified MoO₃–Bi₂SiO₅/SiO₂ catalyst with a P/Mo molar ratio of 0.5 exhibits the best catalytic performance for epoxidation of propylene by O₂, the TOFs for propylene oxide (PO) formation was four times higher than that of the unmodified one at 633 K. The modification by P could promote the dispersion of MoO₃ nanoparticles and increase the number of weak and moderate acid sites with respect to the phosphorus-free MoO₃–Bi₂SiO₅/SiO₂ catalyst, which were beneficial to the formation of PO. Moreover, the introduction of P also could protect the mesoporous structure by inhibiting the formation of Bi₂Mo₃O₁₂, which was beneficial to the dispersion of active species. We suppose that the phosphorus, bismuth and molybdenum species of P-modified MoO₃–Bi₂SiO₅/SiO₂ catalyst play important roles for propylene epoxidation by molecular oxygen.     

The application of copolymer-coated graphene oxide-Fe3O4 in the highly efficient synthesis of 2′-aminospiro[indeno[1,2-b]quinoxaline-11,4′-[4'H] pyran]-3′-carbonitrile and 2′-aminospiro[indeno-2,4′-[4'H]pyran]-3′-carbonitrile

A magnetic nanocomposite based on graphene oxide was prepared. Fe₃O₄ nanoparticles were loaded on graphene oxide sheets and GO-Fe₃O₄ was covered by aniline-pyrrole copolymer to afford poly(Py-co-Ani)@GO-Fe₃O₄. This nanocomposite was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, vibrating sample magnetometry, X-ray diffraction, thermogravimetric analysis, and X-ray photoelectron spectroscopy techniques, and its catalytic activity was evaluated in the multicomponent synthesis of 2′-aminospiro[indeno[1,2-b]quinoxaline-11,4′-[4'H]pyran]-3′-carbonitrile and 2′-aminospiro[indeno-2,4′-[4'H]pyran]-3′-carbonitrile derivatives. This magnetically separable catalyst is heterogeneous noncorrosive, highly efficient, and reusable.     

Electrophysical properties of bismuth titanates with the pyrochlore structure Bi<Subscript>1.6</Subscript>M<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Ti<Subscript>2</Subscript>O<Subscript>7–δ</Subscript> (M = In,Li)

Lithium-containing bismuth titanates with the pyrochlore-type structure Bi_1.6Li_xTi₂O_7–δ were obtained for the first time. The formation of the pyrochlore phase was confirmed by X-ray diffraction analysis, scanning electron microscopy and local microanalysis. In Bi_1.6M_xTi₂O_7–δ, the lithium and indium are occupied the bismuth sites, primarily. The electrophysical properties of doped bismuth titanates were studied by impedance spectroscopy in the frequency range 1–10⁶ Hz. In the low-temperature range (of up to ~400°C), electron conductivity predominates; above 400°C, the oxygen-ion type of conductivity is revealed. In the range p(O₂) = 0.21–1 atm, the average value of the sum of ion transport numbers is 0.5 at 500–550°C. The relaxation process was found from the frequency dependences of the dielectric parameters (ε', tan δ, M''), which was of the same type for systems with different dopants (In, Li) probably due to the hopping mechanism of oxygen conductivity.     

Synthesis,structure, and properties of substituted bismuth niobates Bi<Subscript>3</Subscript>Nb<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>Er<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>7–δ</Subscript>

Results are reported of a study of the structural and electrical characteristics of substituted bismuth niobates with composition Bi₃Nb_1–x Er _x O_7–δ, which are promising oxygen-ion conductors. The homogeneity regions of solid solutions were determined by X-ray phase analysis and electron microscopy with X-ray fluorescence microanalysis, and their crystal-chemical parameters were calculated. The electrical conductivity of sintered samples was examined by impedance spectroscopy.