Synthesis and characterization of a pair of temperature and cosolvent-dependent Zn(II)-organic frameworks containing a novel discrete single-walled Zn(II)-organic coordination polymer nanotube

A pair of temperature and cosolvent-controlled assemblies of one dimensional (1-D) and two dimensional (2-D) Zn(II)-organic frameworks (ZOFs] based on 5-iodoisophthalic acid (H₂IIP) and an auxiliary flexible ligand, 1,4-bis(triazol-1-ylmethyl)benzene (bbtz) with different structures, has been rationally designed and successfully synthesized. Results show that when the reaction was carried out under ambient condition, the novel discrete single-walled Zn(II)-organic coordination polymer nanotube {[Zn(IIP)(bbtz)(H₂O)]·H₂O}_n (SWCPNT-1), which shows a fascinating 3-D supramolecular interdigitated columnar microporous architecture supported by face to face π?π stacking interactions and hydrogen bonds, was generated, whereas under solvothermal condition at 120?°C, an interesting 3-D-polycatenated array of layers, [Zn(IIP)(bbtz)] (2), which further extends into a threefold-interpenetrated 3-D supramolecular mesoporous framework with 1-D channels (ca. 3.46?×?1.54?nm²) through C–I?O halogen bonds would be obtained. Interestingly, the reversible in situ rapid rehydration from static air is significantly observed in the discrete SWCPNT-1, revealing its potential application as water absorbent and sensing material. The dehydrated SWCPNT-1 shows selective gas adsorption of CO₂ over N₂. Luminescent studies show that SWCPNT-1, dehydrated SWCPNT-1, and 2 exhibit blue fluorescence in the solid state. The water molecules in SWCPNT-1 affect its fluorescent property.     

Selective sensing of CrVI and FeIII ions in aqueous solution by an exceptionally stable TbIII-organic framework with an AIE-active ligand

We herein report a new lanthanide metal-organic framework (MOF) that exhibits excellent chemical stability, especially in the aqueous solution over a wide pH range from 1 to 14. In contrast to many reported lanthanide MOFs, this Tb-based MOF emits cyan fluorescence inherited from the integrated AIE-active ligand, rather than Ln³⁺ ions. More remarkably, its fluorescence signal features a highly selective and sensitive “turn-off” response toward CrO₄²⁻, Cr₂O₇²⁻ and Fe³⁺ ions, highlighted with the low detection limits down to 68.18, 69.85 and 138.8 ppm, respectively. Thus, the exceptional structural stability and sensing performance render this material able to be a superior luminescent sensor for heavy metal ions in wastewater.     

Highly sensitive and selective detect of p‐arsanilic acid with a new water‐stable europium metal–organic framework

The p‐arsanilic acid (p‐ASA), as an aromatic organoarsenic compounds, had received considerable concerns for their potential toxicity and carcinogenic properties. It was essential to detect p‐ASA with a facile method. In this paper, an europium based fluorescent metal–organic framework (MOF) [Eu₂(clhex)·2H₂O)]·H₂O ( BUC‐69 ) was successfully prepared under hydrothermal conditions with 1,2,3,4,5,6‐cyclohexanehexacarboxylic acid (H₆clhex) as organic linker. BUC‐69 displayed superior fluorescence capability to achieve selective and sensitive detection toward p‐ASA in water, which presented the first example of a MOF‐based sensor to detect p‐ASA. BUC‐69 showed excellent chemical stability in solutions under pH ranging from 4 to 12, which makes it be a potential sensor both in acidity and alkalinity condition. Significantly, BUC‐69 performed well in fluorescent sensing of p‐ASA at a low concentration (10^?6 M) in the simulated wastewater prepared with real lake water, and the results were comparable to the values detected by Inductively Coupled Plasma Optical Emission Spectrometer (ICP‐OES). The corresponding mechanism of fluorescent sensing toward p‐ASA with BUC‐69 was proposed and affirmed.     

Synthesis and characteristics of copper(ii) trimesate composites with thermal decomposition products of the coffee and tea waste

Composites containing a metal–organic framework of copper(ii) 1,3,5-benzenetricarboxylate with activated carbons from pyrolysis of the coffee bean as well as green and black tea waste have been found suitable for recovery of the organic dyes Congo red and methylene blue from their aqueous solutions with a maximum adsorption of 180 mg g^–1     

Electroactive Organic Building Blocks for the Chemical Design of Functional Porous Frameworks (MOFs and COFs) in Electronics

Electroactive organic molecules have received a lot of attention in the field of electronics because of their fascinating electronic properties, easy functionalization and potential low cost towards their implementation in electronic devices. In recent years, electroactive organic molecules have also emerged as promising building blocks for the design and construction of crystalline porous frameworks such as metal–organic frameworks (MOFs) and covalent-organic frameworks (COFs) for applications in electronics. Such porous materials present certain additional advantages such as, for example, an immense structural and functional versatility, combination of porosity with multiple electronic properties and the possibility of tuning their physical properties by post-synthetic modifications. In this Review, we summarize the main electroactive organic building blocks used in the past few years for the design and construction of functional porous materials (MOFs and COFs) for electronics with special emphasis on their electronic structure and function relationships. The different building blocks have been classified based on the electronic nature and main function of the resulting porous frameworks. The design and synthesis of novel electroactive organic molecules is encouraged towards the construction of functional porous frameworks exhibiting new functions and applications in electronics.     

A new luminescent anionic metal–organic framework based on heterometallic zinc(II)–barium(II) for selective detection of Fe3+ and Cu2+ ions in aqueous solution

Over the past two decades, the development of novel inorganic–organic hybrid porous crystalline materials or metal–organic frameworks (MOFs) using crystal engineering has provoked significant interest due to their potential applications as functional materials. In this context, luminescent MOFs as fluorescence sensors have recently received significant attention for the sensing of ionic species and small molecules. In this work, a new luminescent heterometallic zinc(II)–barium(II)‐based anionic metal–organic framework, namely poly[imidazolium [triaqua(μ₆‐benzene‐1,3,5‐tricarboxylato)bariumtrizinc] tetrahydrate], {(C₃H₄N₂)[BaZn₃(C₉H₃O₆)₃(H₂O)₃]·4H₂O}_n ( 1 ), was synthesized under hydrothermal conditions and characterized. Compound 1 presents a three‐dimensional framework with an unprecedented (3,5)‐connected topology of the point symbol (3.9²).(3³.4².5.9³.10), and exhibits `turn‐off' luminescence responses for the Cu²⁺ and Fe³⁺ ions in aqueous solution based on significantly different quenching mechanisms.     

A Systematic Study of Fluorescence‐Based Detection of Nitroexplosives and Other Aromatics in the Vapor Phase by Microporous Metal–Organic Frameworks

A systematic study is conducted on four microporous metal–organic framework compounds built on similar ligands but different structures, namely [Zn₃(bpdc)₃(bpy)] ? 4 DMF ? H₂O ( 1 ), [Zn₃(bpdc)₃(2,2′dmbpy)] ? 4 DMF ? H₂O ( 2 ), [Zn₂(bpdc)₂(bpe)] ? 2 DMF ( 3 ), and [Zn(bpdc)(bpe)] ? DMF ( 4 ) (bpdc=4,4′‐biphenyldicarboxylate; bpy=4,4′‐bipyridine; 2,2′dmbpy=2,2′‐dimethyl‐4,4′bipyridine; bpe=1,2‐bis(4‐pyridyl)ethane; DMF=N,N′‐dimethylformamide) to investigate their photoluminescence properties and sensing/detection behavior upon exposure to vapors of various aromatic molecules (analytes) including nitroaromatic explosives. The results show that all four compounds are capable of detecting these molecules in the vapor phase through fluorescence quenching or enhancement. Both electrochemical measurements and theoretical calculations are performed to analyze the analyte–MOF interactions, to explain the difference in signal response by different analytes, and to understand the mechanism of fluorescence quenching or enhancement observed in these systems. Interestingly, compound 3 also shows an emission frequency shift when exposed to benzene (BZ), chlorobenzene (ClBZ), and toluene (TO), which provides an additional variable for the identification of different analytes in the same category.     

A stable pillared metal–organic framework constructed by H4TCPP ligand as luminescent sensor for selective detection of TNP and Fe3+ ions

A novel luminescent metal–organic framework ( Zn‐TCPP/BPY ) with pillared structure based on 2,3,5,6‐tetrakis(4‐carboxyphenyl)pyrazine (H₄TCPP) and 4,4′‐bipyridine (BPY) has been designed and synthesized through a solvothermal reaction. The [Zn₂(COO)₄] paddlewheel units are linked by TCPP^4? ligands to form two‐dimensional layers and further connected by BPY ligands as pillars to construct the twofold interpenetrating three‐dimensional framework. Interestingly, Zn‐TCPP/BPY possesses outstanding stability in organic solvents and water as well as maintains its structural rigidity in aqueous solutions of different pH values (3–12). After activation, Zn‐TCPP/BPY possesses permanent porosity with Brunauer–Emmett–Teller surface area of 630 m² g^–1. Remarkably, Zn‐TCPP/BPY displays excellent fluorescent property in virtue of the aggregation‐induced emission effect of the H₄TCPP ligand, which can be highly active and quenched by small amounts of 2,4,6‐trinitrophenol (TNP) and Fe³⁺ ions. Furthermore, the detection effect of Zn‐TCPP/BPY remains basically the same even after five cycles. The excellent stability, high sensitivity, and recyclability of Zn‐TCPP/BPY make it an outstanding chemical sensor for detecting TNP and Fe³⁺ ions.     

An imidazole functionalized copper(II)-organic framework for highly selective sensing of picric acid and metal ions in water

An imidazole functionalized metal–organic framework (MOF), [Cu(HL)(H₂O)]·(H₂O)·(DMA) ( HBU-166 , H₃L = 4,4′,4″-(1H-imidazole-2,4,5-triyl)tribenzoic acid, DMA = N,N-dimethylacetamide) was synthesized and characterized by single-crystal X-ray diffraction. HBU-166 was observed as a two-dimensional MOF and showed good stability in water, an acidic solution (pH = 4), and an alkaline solution (pH = 9). HBU-166 exhibited ligand-based luminescence with a blue shift, which could be attributed to the coordination effect. Moreover, HBU-166 could be applied to detect nitroaromatic compounds (NACs) and metal ions in water with preferable selectivity and sensitivity. In particular, HBU-166 could be used as a promising luminescent sensor for picric acid (PA) with enhancement of emission intensity. The mechanism for PA detection likely involved electron transfer and weak interaction between ligand and electron-deficient of NACs at the beginning to increase the emission intensity. Additionally, HBU-166 exhibited excellent selectivity in the sensing of 4-nitrophenol and Fe³⁺ through fluorescence quenching.     

硼酸官能化金属-有机骨架磁性纳米复合材料的制备及其在茶叶农药残留检测中的应用

在茶叶的农药残留检测中,茶多酚及色素具有很强的基质效应,严重影响了色谱检测结果.该文将Fe3O4磁性纳米粒子与硼酸官能化金属有机骨架(BA-MOF)材料相结合,制备出一种对茶多酚等基质具有高效捕获能力的吸附材料Fe3O4@BA-MOF.结合气相色谱-质谱联用技术,建立了一种茶叶样品中农药残留的有效分析方法.通过在金属有...     

A quantum chemical consideration of ligand exchange in palladium(ii) aqueous and chloride complexes

The behavior of potassium tetrachloropalladate(II) in media simulating biological fluids has been studied. In aqueous solutions of NaCl, the aquation rate is higher than the rate of chloro ligand introduction into the internal coordination sphere of palladium. In HCl solutions, on the contrary, the process of palladium chloro complex formation predominates. The latter is apparently due to protonation of water molecules composing aqua complexes. By means of the ZINDO/1 method, the substitution of ligands – water molecules and hydronium ion – in planar complexes of palladium(II) by chloride ion has been investigated. All complexes containing H₂O and H₃O⁺ ligands, other than [Pd(H₂O)₄]²⁺, have intramolecular hydrogen bonds. In [Pd(H₂O)₃(H₃O)]³⁺ and trans-[Pd(H₂O)₂(H₃O)Cl]²⁺, a “non-classic” symmetric hydrogen bond O ··· H ··· O is established (ZINDO/1, RHF/STO-6G*). By the first three steps the substitution of hydronium ion in the internal sphere of palladium atom is more favorable thermodynamically, compared to water molecules. Logarithms of stepwise stability constants of palladium(II) chloride complexes correlate linearly to enthalpies (ZINDO/1, PM3) of water substitution by chloride ion.     

A Recyclable bi‐functional Luminescent Zinc (II) metal–organic framework as highly selective and sensitive sensing probe for nitroaromatic explosives and Fe3+ ions

By introducing carboxyl tag to the aromatic ligands system and borrowing the organic template open framework idea, a stable fluorescent Zn metal–organic framework was successfully prepared through a rigid ligand H₆L (3,5‐bis‐(3‐carboxyphenoxy)benzoic acid) under hydrothermal conditions. The selectivity and sensitivity of the Zn‐MOF to metal ions and nitro‐aromatic compounds (NACs) were investigated by fluorescence quenching. And the Zn‐MOF showed a high sensibility of nitro‐aromatic compounds (NACs) and Fe³⁺ ions, especially for 4‐(4‐nitropheny lazo) resorcinol (NPLR). More importantly, the detection limit of the Zn‐MOF for detecting NPLR solution was found to be 1.71 ppb. Moreover, this sensor is remarkable recyclable and is promisingly applied for rapid, on‐site and sensing of explosive residuals.     

Preparation of core/shell/shell CoFe2O4/OCMC/Cu (BDC) nanostructure as a magnetically heterogeneous catalyst for the synthesis of substituted xanthenes,quinazolines and acridines under ultrasonic irradiation

Highly efficient synthesized magnetic cobalt ferrite nanoparticles supported on OCMC@Cu (BDC) was utilized in the preparation of biologically active heterocyclic compounds through one-pot three-component reactions between of aldehydes, dimedone, aryl amines/2-naphthol/urea under ultrasonic irradiation. This method has various advantages including excellent yields, little catalyst loading, simple procedure, facile catalyst separation, short reaction times, eco-friendly approach and simple purification. The catalyst was characterized by various spectroscopy methods such as fourier-transform infrared (FT-IR), energy-dispersive X-ray (EDX), scanning electron microscope (SEM), X-ray diffraction (XRD) and N₂ adsorption–desorption isotherm (BET). Furthermore, the heterocyclic compounds were characterized by spectral techniques. The nanocomposite was simply separated byusing an external magnet, and it can be recycled several times without significant loss of activity.     

A study of adsorptive stripping voltammetric behavior of ofloxacine antibiotic in the presence of Fe(III) and its determination in tablets and biological fluids

Square-wave voltammetry was used to explore the adsorption property of ofloxacine complex with iron ion on the hanging mercury drop electrode (HMDE). By employing the adsorptive stripping voltammetric approach, a sensitive electroanalytical method for the quantitative analysis of ofloxacine antibiotic was achieved. A well-developed voltammetric peak was obtained in pH 7.5 Britton–Robinson buffer (B–R buffer) at ?1400 mV. The cyclic voltammetric studies indicated that the reduction process was irreversible and primarily controlled by adsorption. An investigations of the variation of adsorptive voltammetric peak current with supporting electrolyte, pH, accumulation time, accumulation potential, ion concentration, scan rate, pulse amplitude, SW frequency, working electrode area and convection rate has resulted in the recognition of optimal experimental conditions for ofloxacine analysis. The studied electroanalytical signal showed a linear response for ofloxacine in the concentration range 5 × 10^?7 to 1.7 × 10^?6 mol l^?1 (r = 0.999). A limit of detection of 1.1 × 10^?8 mol l^?1 (3.98 ppb) with relative standard deviation of 1.21 RSD% and mean recovery of 99.6% were obtained. Possible interferences by several substances usually present in pharmaceutical formulation were also evaluated. The analytical quantification of ofloxacine in commercially available pharmaceutical formulation was performed and compared with data from HPLC technique.     

A Cd(II) Luminescent Coordination Grid as a Multiresponsive Fluorescence Sensor for Cr(VI) Oxyanions and Cr(III), Fe(III), and Al(III) in Aqueous Medium

Hydro(solvo)thermal reactions of Cd(NO₃)₂, N-(pyridin-3-ylmethyl)-4-(pyridin-4-yl)-1,8-naphthalimide (NI-mbpy-34), and 5-bromobenzene-1,3-dicarboxylic acid (Br-1,3-H₂bdc) afforded a luminescent coordination polymer, {[Cd(Br-1,3-bdc)(NI-mbpy-34)(H₂O)]∙2H₂O}_n (1). Single-crystal X-ray diffraction analysis showed that 1 features a two-dimensional (2-D) gridlike sql layer with the point symbol of (4⁴·6²), where the Cd(II) center adopts a {CdO₅N₂} pentagonal bipyramidal geometry. Thermogravimetric (TG) analysis confirmed the thermal stability of 1 up to about 340 °C, whereas XRPD patterns proved the maintenance of crystallinity and framework integrity of 1 in CH₂Cl₂, H₂O, CH₃OH, and toluene. Photoluminescence studies indicated that 1 displayed intense blue fluorescence emissions in both solid-state and H₂O suspension-phase. Owing to the good fluorescent properties, 1 could serve as an excellent turn-off fluorescence sensor for selective and sensitive Cr(VI) detection in water, with LOD = 15.15 μM for CrO₄²⁻ and 14.91 μM for Cr₂O₇²⁻, through energy competition absorption mechanism. In addition, 1 could also sensitively detect Cr³⁺, Fe³⁺, and Al³⁺ ions in aqueous medium via fluorescence-enhancement responses, with LOD = 2.81 μM for Cr³⁺, 3.82 μM for Fe³⁺, and 3.37 μM for Al³⁺, mainly through an absorbance-caused enhancement (ACE) mechanism.     

A Zn(II)-Based Sql Type 2D Coordination Polymer as a Highly Sensitive and Selective Turn-On Fluorescent Probe for Al3+

A luminescent coordination polymer with the overall formula {[Zn(tr₂btd)(bpdc)]∙DMF}_n (where tr₂btd = 4,7-di(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole; bpdc = 4,4′-biphenyldicarboxylate) was synthesized and characterized by single-crystal and powder X-ray diffraction, thermogravimetric, infrared spectroscopy, and elemental analyses. Luminescent properties of the obtained compound were studied in detail both in the solid state and as a suspension in N,N-dimethylacetamide (DMA). It was found that {[Zn(tr₂btd)(bpdc)]∙DMF}_n exhibits bright turquoise luminescence with excellent quantum efficiency and demonstrates turn-on fluorescence enhancement effect upon soaking in DMA Al³⁺ solution. Fluorescence titration experiments were carried out and the detection limit for Al³⁺ ions was calculated to be 120 nM, which is among the lowest reported values for similar materials. Moreover, compound demonstrated excellent selectivity and reusability, and the mechanism of the response is discussed. These results indicate that {[Zn(tr₂btd)(bpdc)]∙DMF}_n is a promising probe for sensitive fluorescent Al³⁺ detection.     

A Water‐Stable Terbium(III)–Organic Framework as a Chemosensor for Inorganic Ions,Nitro‐Containing Compounds and Antibiotics in Aqueous Solutions

Effective detection of organic/inorganic pollutants, such as antibiotics, nitro‐compounds, excessive Fe³⁺ and MnO₄^?, is crucial for human health and environmental protection. Here, a new terbium(III)–organic framework, namely [Tb(TATAB)(H₂O)]?2H₂O ( Tb‐MOF , H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐m‐aminobenzoic acid), was assembled and characterized. The Tb‐MOF exhibits a water‐stable 3D bnn framework. Due to the existence of competitive absorption, Tb‐MOF has a high selectivity for detecting Fe³⁺, MnO₄^?, 4‐nirophenol and nitroimidazole (ronidazole, metronidazole, dimetridazole, ornidazole) in aqueous through luminescent quenching. The results suggest that Tb‐MOF is a simple and reliable reagent with multiple sensor responses in practical applications. To the best of our knowledge, this work represents the first Tb^III‐based MOF as an efficient fluorescent sensor for detecting metal ions, inorganic anions, nitro‐compounds, and antibiotics simultaneously.     

A novel (3,6)‐connected CdII coordination polymer based on an ether‐linked tricarboxylate ligand: synthesis,topology and luminescence sensing properties in aqueous solution

A novel three‐dimensional coordination polymer, namely, poly[[diaquabis(μ‐4,4′‐bipyridine)bis{μ₃‐5‐[(2‐carboxyphenoxy)methyl]isophthalato}tricadmium(III)] dimethylformamide monosolvate 2.5‐hydrate], {[Cd₃(C₁₆H₉O₇)₂(C₁₀H₈N₂)₂(H₂O)₂]·2C₃H₇NO·5H₂O}_n, was obtained by the reaction of ether‐linked 5‐[(2‐carboxyphenoxy)methyl]isophthalic acid (H₃L) with Cd^II salts in the presence of 4,4′‐bipyridine (bpy) under solvothermal conditions. In this complex, the Cd^II centres are connected by the carboxylate ligands to form two‐dimensional wave‐like layers, which are pillared by bpy ligands and extended into a rare three‐dimensional (3,6)‐connected sqc27 framework. The complex demonstrated good water stability and strong luminescence emissions. It not only possesses excellent luminescence sensing activities toward Fe³⁺ and Cr₂O₇^2? in aqueous solution, but can also distinguish between Cr₂O₇^2? and CrO₄^2? by luminescence. Furthermore, it could be simply and quickly regenerated at least five times. A study of the sensing mechanism indicated that luminescence quenching may be related to the energy competition between the complex and sensing analytes.     

A two‐dimensional zinc(II) coordination polymer created via in situ ligand synthesis involving C—N bond formation

The novel Zn^II coordination polymer poly[{μ₄‐2‐[3‐(pyridin‐2‐yl)‐1H‐pyrazol‐3‐yl]butanedioato}zinc(II)], [Zn(C₁₂H₉N₃O₄)]_n, has been synthesized hydrothermally and structurally characterized. The results demonstrate that the complex shows two‐dimensional neutral wave‐like layers. The complex was prepared by the conjugate addition reaction of 2‐(1H‐pyrazol‐3‐yl)pyridine to cis‐fumaric acid in the presence of Zn(OAc)₂·2H₂O (OAc is acetate) at 413 K.     

A zinc(II) metal–organic framework with a novel topology formed from 4,4′,4′′‐nitrilotribenzoate and 4,4′‐bipyridine ligands

A metal–organic framework with a novel topology, poly[sesqui(μ₂‐4,4′‐bipyridine)bis(dimethylformamide)bis(μ₄‐4,4′,4′′‐nitrilotribenzoato)trizinc(II)], [Zn₃(C₂₁H₁₂NO₆)₂(C₁₀H₈N₂)_1.5(C₃H₇NO)₂]_n, was obtained by the solvothermal method using 4,4′,4′′‐nitrilotribenzoic acid and 4,4′‐bipyridine (bipy). The structure, determined by single‐crystal X‐ray diffraction analysis, possesses three kinds of crystallographically independent Zn^II cations, as well as binuclear Zn₂(COO)₄(bipy)₂ paddle‐wheel clusters, and can be reduced to a novel topology of a (3,3,6)‐connected 3‐nodal net, with the Schläfli symbol {5.6²}₄{5².6}₄{5⁸.8⁷} according to the topological analysis.