Decorated CuO nanoparticles over chitosan-functionalized magnetic nanoparticles: Investigation of its anti-colon carcinoma and anti-gastric cancer effects

In this study, a green protocol for supporting CuO nanoparticles over chitosan-modified amino-magnetic nanoparticles is described. The physicochemical and morphological properties of the desired nanocomposite assessed by various techniques like ICP, FT-IR, FE-SEM, EDX, TEM, XRD and VSM. In the oncological part of the recent study, the Cu(NO₃)₂, Fe₃O₄, and Fe₃O₄-NH₂@CS/CuO nanocomposite cell viability was very low against human gastric cancer cell lines i.e. MKN45, AGS, and KATO III and human colorectal carcinoma cell lines i.e. HT-29, HCT 116, HCT-8 [HRT-18], and Ramos.2G6.4C10. The IC50 of Fe₃O₄-NH₂@CS/CuO nanocomposite against MKN45, AGS, KATO III, HT-29, HCT 116, HCT-8 [HRT-18], and Ramos.2G6.4C10 cell lines were 517, 525, 544, 282, 214, 420, and 477 µg/mL, respectively. Thereby, the best anti-gastro-duodenal cancers findings of our Fe₃O₄-NH₂@CS/CuO nanocomposite was seen in the HCT 116 cell line case.     

The immobilized Ni(II)‐thiourea complex on silica‐layered copper ferrite: A novel and reusable nanocatalyst for one‐pot reductive‐acetylation of nitroarenes

In this study, magnetically nanoparticles of CuFe₂O₄@SiO₂@PTMS@Tu@Ni(II) as novel and reusable catalyst were prepared. Synthesis of the Ni (II)‐nanocatalyst was carried out through the complexation of Ni(OAc)₂·4H₂O with the immobilized thiourea on silica‐layered CuFe₂O₄. The prepared nanocomposite system was then characterized using SEM, EDX, XRD, VSM, ICP‐OES, Raman, UV–Vis and FT‐IR analyses. Catalytic activity of the Ni(II)‐CuFe₂O₄ system was investigated towards rapid reduction of aromatic nitro compounds to arylamines with sodium borohydride as well as one‐pot reductive‐acetylation of nitroarenes to acetanilides with NaBH₄/Ac₂O system without the isolation of intermediate arylamines. All reactions were carried out in H₂O within 3–7 min to afford the products arylamines/acetanilides in high to excellent yields. Reusability of the Ni(II)‐nanocatalyst was examined for seven consecutive cycles without the significant loss of the catalytic activity.     

Magnetic properties of nanocrystalline CuFe2O4 and kinetics of thermal decomposition of precursor

CuFe₂(C₂O₄)₃·4.5H₂O was synthesized by solid-state reaction at low heat using CuSO₄·5H₂O, FeSO₄·7H₂O, and Na₂C₂O₄ as raw materials. The spinel CuFe₂O₄ was obtained via calcining CuFe₂(C₂O₄)₃·4.5H₂O above 400 °C in air. The CuFe₂(C₂O₄)₃·4.5H₂O and its calcined products were characterized by thermogravimetry and differential scanning calorimetry, Fourier transform FT-IR, X-ray powder diffraction, scanning electron microscopy, energy dispersive X-ray spectrometer, and vibrating sample magnetometer. The result showed that CuFe₂O₄ obtained at 400 °C had a saturation magnetization of 33.5 emu g^?1. The thermal process of CuFe₂(C₂O₄)₃·4.5H₂O experienced three steps, which involved the dehydration of four and a half crystal water molecules at first, then decomposition of CuFe₂(C₂O₄)₃ into CuFe₂O₄ in air, and at last crystallization of CuFe₂O₄. Based on KAS equation, OFW equation, and their iterative equations, the values of the activation energy for the thermal process of CuFe₂(C₂O₄)₃·4.5H₂O were determined to be 85 ± 23 and 107 ± 7 kJ mol^?1 for the first and second thermal process steps, respectively. Dehydration of CuFe₂(C₂O₄)₃·4.5H₂O is multistep reaction mechanisms. Decomposition of CuFe₂(C₂O₄)₃ into CuFe₂O₄ could be simple reaction mechanism, probable mechanism function integral form of thermal decomposition of CuFe₂(C₂O₄)₃ is determined to be 1 ? (1 ? α)^1/4.     

Influence of the heat treatment conditions on the formation of CuFe2O4 from mechanical milled precursors oxides

Stoichiometric mixture of CuO and ??-Fe₂O₃ milled in air up to 30?h was subjected to different heat treatments. The evolution of the heat treated milled powders was investigated by X-ray diffraction (XRD). The CuFe₂O₄ was partially obtained by milling, the material consisting in a mixture of phases. By applying different heat treatments in air and in vacuum, for 2?C6?h, in 500?C800?°C temperature range the phases composition of the milled samples is changed. A heat treatment at 500?°C in vacuum favours the formation of delafossite (CuFeO₂) and tenorite (CuO) phases. If the same heat treatment is made in air, the CuFe₂O₄ phase formation with a cubic structure is favoured. Differential scanning calorimetry (DSC) investigation realised in Ar atmosphere revealed two large exothermic peaks. The first one is associated with the formation of the delafossite and tenorite phases and the second one with the formation of CuFe₂O₄. The XRD patterns of the samples subjected to the DSC measurements present maxima corresponding to the delafossite and cuprospinel (CuFe₂O₄) phases. For the heat treatment at 600?°C in air the phases present in the sample are the same as for the annealing performed at 500?°C: CuFe₂O₄, ??-Fe₂O₃ and CuO. The heat treatment in air at 800?°C leads to the complete reaction between the different phases and the formation of CuFe₂O₄ phase in whole the sample volume. The CuFe₂O₄ ferrite crystallises after this heat treatment in two crystal systems: cubic and tetragonal.     

纳米CuFe2O4-rGO复合材料的制备及电化学性能

采用溶剂热法成功制备了纳米CuFe₂O₄-rGO复合材料。通过X射线衍射（XRD）,扫描电子显微镜（SEM）、透射电子显微镜（TEM）和电化学工作站对样品的结构、形貌及电容特性进行表征。结果表明,CuFe₂O₄纳米粒子均匀地分散在石墨烯片层间,其中CuFe₂O₄-20% rGO复合材料具有最优的电化学性能,当电流密度1 A·g^-1时,其比电容为1 952.5 F·g^-1,当电流密度为1 A·g^-1时,CuFe₂O₄-20% rGO复合材料经1 000次充放电后的比电容保持率为86.17%。     

Green supported Cu nanoparticles on modified Fe3O4 nanoparticles using thymbra spicata flower extract: Investigation of its antioxidant and the anti-human lung cancer properties

In recent days, the green synthesized nanomagnetic biocomposites have been evolved with tremendous potential as the future biological agents. This has encouraged us to design and synthesis of a novel Cu NPs supported Thyme flower extract modified magnetic nanomaterial (Fe₃O₄/Thyme-Cu). It was meticulously characterized using advanced analytical techniques like FT-IR, FESEM, TEM, EDX, VSM, XRD and ICP-OES. After the characterization, the synthesized Fe₃O₄/Thyme-Cu nanocomposite was engaged in biological assays like study of anti-oxidant properties by DPPH mediated free radical scavenging test using BHT as a reference molecule. Thereafter, on having a significant IC50 value in radical scavenging assay, we extended the bio-application of the desired nanocomposite in anticancer study of A549, Calu6 and H358 human lung cell lines in-vitro through MTT assay. They had very low cell viability and high anti-human lung cancer activities dose-dependently against A549, Calu6 and H358 cell lines without any cytotoxicity on the normal cell line (MRC-5). The IC50 of Fe₃O₄/Thyme-Cu nanocomposite was 124, 265, and 181 µg/mL against A549, Calu6 and H358 cell lines, respectively. Maybe significant anti-human lung cancer potentials of Fe₃O₄/Thyme-Cu nanocomposite against common lung cancer cell lines are related to their antioxidant activities. So, these results suggest that synthesized Fe₃O₄/Thyme-Cu nanocomposite as a chemotherapeutic nanomaterial have a suitable anticancer activity against lung cell lines.     

Magnetic copper ferrite catalyzed homo‐ and cross‐coupling reaction of terminal alkynes under ambient atmosphere

The application of non‐toxic and magnetically separable nano‐CuFe₂O₄ as an efficient catalyst for oxidative homo‐ and cross‐coupling reaction of terminal alkynes is described. A wide range of symmetrical and unsymmetrical 1,3‐diynes have been synthesized in moderate to good yields under ambient atmosphere. The nano CuFe₂O₄ can be recovered with a magnet and reused at least five consecutive cycles with no appreciable loss of its catalytic activity.     

纳米CuFe_2O_4-rGO复合材料的制备及电化学性能

采用溶剂热法成功制备了纳米CuFe_2O_4-rGO复合材料。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和电化学工作站对样品的结构、形貌及电容特性进行表征。结果表明,CuFe_2O_4纳米粒子均匀地分散在石墨烯片层间,其中CuFe_2O_4-20%rGO复合材料具有最优的电化学性能,当电流密度1 A·g~(-1)时,其比电容为1 952.5 F·g~(-1),当电流密度为1 A·g~(-1)时,CuFe_2O_4-20%rGO复合材料经1 000次充放电后的比电容保持率为86.17%。     

Green synthesis of Ag/Fe3O4 nanoparticles using Mentha extract: Preparation,characterization and investigation of its anti-human lung cancer application

In this study, silver nanoparticles (Ag NPs) were decorated on the surface of magnetic nanoparticles in an eco-friendly pathway applying Mentha extract as reducing/stabilizing agent. The morphological and physicochemical features of the prepared Ag/Fe₃O₄nanocomposite were determined using several advanced techniques. Hence, our protocol is green and advantageous in terms of- i) biochemical modified biocompatible nanocomposite; ii) nanomaterial providing high surface area and larger number reactive sites; iii) very simplistic synthetic procedure; vi) very low load of metal in the composite and v) high yield in short time. In the medicinal part, the anticancer properties of Ag/Fe₃O₄ nanocomposite against lung cancer cell lines were determined. The free radical for the antioxidant effects was DPPH. The IC₅₀ of Ag/Fe₃O₄ nanocomposite was 200 µg/ml in the antioxidant test. The IC₅₀ of the Ag/Fe₃O₄ nanocomposite were 183, 176, 169, and 125 µg/mL against lung cancer (NCI-H661, NCI-H1975, NCI-H1573, and NCI-H1563) cell lines, respectively. In addition, the current study offer that Ag/Fe₃O₄ nanocomposite could be a new potential adjuvant chemopreventive and chemotherapeutic agent against cytotoxic cells.     

CuFe2O4@GO nanocomposite as an effective and recoverable catalyst of peroxymonosulfate activation for degradation of aqueous dye pollutants

Recently, heterogeneous activation of peroxymonosulfate (PMS) to oxidatively degrade organic pollutants has been a hotspot. In the present work, copper ferrite-graphite oxide hybrid (CuFe₂O₄@GO) was prepared and used as catalyst to activate PMS for degradation of methylene blue (MB) in aqueous solution. A high degradation efficiency (93.3%) was achieved at the experimental conditions of 20 mg/L MB, 200 mg/L CuFe₂O₄@GO, 0.8 mmol/L PMS, and 25 °C temperature. Moreover, CuFe₂O₄@GO showed an excellent reusability and stability. The effects of various operational parameters including pollutant type, solution pH, catalyst dosage, PMS dosage, pollutant concentration, temperature, natural organic matter (NOM), and inorganic anions on the catalytic degradation process were comprehensively investigated and elucidated. The further mechanistic study revealed the Cu(II)/Cu(I) redox couple on CuFe₂O₄@GO played the dominant role in PMS activation, where both hydroxyl and sulfate radicals were generated and proceeded the degradation of pollutants. In general, CuFe₂O₄@GO is a promising heterocatalyst for PMS-based advanced oxidation processes (AOPs) in wastewater treatment.     

Fabrication of SiO2/CuFe2O4/polyaniline composite: A highly efficient adsorbent for heavy metals removal from aquatic environment

A novel multifunctional of SiO₂/CuFe₂O₄/polyaniline composite was synthesized through the interaction between silica (SiO₂), copper iron oxide (CuFe₂O₄), and polyaniline (PANI) as starting materials. SiO₂/CuFe₂O₄/polyaniline composite was characterized for morphology, crystallinity, textural properties, and utilised for the removal of Fe(II), Mn(II), and Cu(II) from synthetic wastewater solutions. The roles of solution pH (2.0–6.0), interaction time (15–420 min), initial ion concentration (50–700 mg/L), and solution temperature (30–50 °C) in the adsorption process were investigated. The adsorption capacities of SiO₂/CuFe₂O₄/PANI for the tested metal ions were high compared to SiO₂, CuFe₂O_4, and polyaniline. Equilibrium studies indicated that Fe(II) and Mn(II) adsorption were compliant with the Langmuir model, while the Freundlich equation described the removal of Cu(II) ions. The maximum Langmuir capacities were up to 285.71, 416.67, and 454.55 mg/g for Cu(II), Fe(II), and Mn(II), respectively. The pseudo-first-order kinetic model fitted well the metal ions removal data. The rate-controlling step reflected the involvement of surface and inner pore diffusion (intraparticle) processes. Electrostatic attractions and chelation were mainly responsible for the binding of metals ions onto SiO₂/CuFe₂O₄/PANI. The selectivity of the studied ions was governed mainly by the hydrated ionic radii and the composite adsorption active sites. SiO₂/CuFe₂O₄/PANI can be easily reused with a slight decrease (around 2–3%) in metal removal efficiency after four successive regeneration cycles.     

Copper nanoparticles supported on polyethylene glycol-modified magnetic Fe3O4 nanoparticles: Its anti-human gastric cancer investigation

In that work, we have described the synthesis of novel Cu NPs decorated polyethylene glycol (PEG₂₀₀₀) coated magnetic nanoparticles (Fe₃O₄/PEG2000/Cu NPs) in an eco-friendly pathway applying Green Tea extract as reducing/stabilizing agent. The morphological and physicochemical features of the prepared nanocomposite were determined using several advanced techniques like ICP-OES, FE-SEM, EDX, atomic mapping, TEM, VSM, and XRD studies. In the antioxidant test, the IC50 of Fe₃O₄/PEG₂₀₀₀/Cu nanocomposite and BHT against DPPH free radicals were 198 and 85 µg/mL, respectively. In the cellular and molecular part of the recent study, the treated cells with Fe₃O₄/PEG₂₀₀₀/Cu nanocomposite were assessed by MTT assay for 48 h about the cytotoxicity and anti-human gastric cancer properties on normal (HUVEC) and gastric cancer cell lines i.e. NCI-N87 and MKN45. The IC50 of Fe₃O₄/PEG₂₀₀₀/Cu nanocomposite were 316 and 131 µg/mL against NCI-N87 and MKN45 cell lines, respectively. The viability of malignant gastric cell line reduced dose-dependently in the presence of Fe₃O₄/PEG₂₀₀₀/Cu nanocomposite. It seems that the anti-human gastric cancer effect of recent nanoparticles is due to their antioxidant effects.     

Highly selective conversion of methane to ethanol over CuFe2O4-carbon nanotube catalysts at low temperature

Conversion of methane into liquid alcohol such as ethanol at low temperature in a straight, selective and low energy consumption process remains a topic of intense scientific research but a great challenge. In this work, Cu Fe₂O₄/CNT composite is successfully synthesized via a facile co-reduction method and used as catalysts to selectively oxidize methane. At a low temperature of 150 °C, methane is directly converted to ethanol in a single process on the as-prepared CuFe     

A Voltammetric Sensor Based on Spinel-Structured Copper Ferrite Nanoparticles Multiwalled Carbon Nanotubes Modified Carbon Paste Electrode for Determination of Dacarbazine

A simple and sensitive method was used to develop a novel sensor for determination of dacarbazine on the surface of multi-walled carbon nanotubes/CuFe₂O₄ nanoparticles modified carbon paste electrode (MWCNTs/CuFe₂O₄/CPE). Cyclic voltammetry, differential pulse voltammetry, chronoamperometry, and electrochemical impedance spectroscopy were used to investigate the electrochemical behavior of dacarbazine at the chemically modified electrode. According to the results, MWCNTs/CuFe₂O₄/CPE showed high electrocatalytic activity for dacarbazine oxidation, producing a sharp oxidation peak current at about +0.80 vs. Ag/AgCl reference electrode at pH 5.0. The peak current was linearly dependent on dacarbazine concentration over the range of 0.10–76.0 μmol L^–1 with the detection limit (3σ) of 0.08 μmol L^?1. In addition, chronoamperometry was also used to determine diffusion coefficient of dacarbazine at MWCNTs/CuFe₂O₄/CPE.     

Supported silver nanoparticles over alginate-modified magnetic nanoparticles: Synthesis,characterization and treat the human lung carcinoma

This article displays synthesis of Silver nanoparticles (Ag NPs) decorated on sodium alginate covered magnetite (Fe₃O₄/Alg-Ag NPs) nanocomposite. Sodium alginate shell as a natural anionic polysaccharide on Fe₃O₄ microparticles core acted as a stabilizing agent for the reduction of Ag(I) ions into Ag NPs. The structural features of the synthesized nanocomposite were investigated by fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopes (FE-SEM), transmission electron microscopes (TEM), energy-dispersive X-ray spectroscopy (EDX) and vibrating-sample magnetometer (VSM) studies and inductively coupled plasma-optical emission spectroscopy (ICP-OES). 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay was used on common lung cancer cell lines i.e., NCI-H1975, NCI-H1563, and NCI-H1299 to survey the cytotoxicity and anti-lung cancer effects of the synthesized nanocomposite. The synthesized nanocomposite had very low cell viability and high anti-lung cancer activities dose-dependently against NCI-H1975, NCI-H1563, and NCI-H1299 cell lines without any cytotoxicity on the normal cell line (Human umbilical vein endothelial cells (HUVECs)). To determine the antioxidant properties of the synthesized nanocomposite, the 2,2-diphenyl-1-picrylhydrazyl (DPPH) test was used in the presence of butylated hydroxytoluene as the positive control. The synthesized nanocomposite inhibited half of the DPPH molecules in the concentration of 194 µg/mL. Maybe significant anti-human lung cancer potentials of the synthesized nanocomposite against common human lung cancer cell lines are linked to their antioxidant activities.     

Inclusion of sulfamethoxazole in a novel CuFe2O4 nanoparticles/mesoporous silica‐based nanocomposite: Release kinetics and antibacterial activity

In this work, we aimed to improve the antibacterial activity of sulfamethoxazole (SMX) via its inclusion in a newly synthesized nanocomposite composed of CuFe₂O₄ nanoparticles and poly(vinyl alcohol)/silica‐based mesoporous materials. Characterization of this formulation using different techniques confirmed the correct synthesis and showed that this mesoporous nanocomposite had an amorphous structure with relatively high surface area of 1,620.7 m² g^?1 and mean pore diameter of 1.6576 nm. Zeta potential of the formulation was obtained to be zero which led to its higher bioavailability in comparison to pure SMX with negative zeta potential. Antibacterial property of the prepared formulation against Staphylococcus aureus and Escherichia coli was evaluated. Minimum inhibitory concentration of the SMX‐loaded mesoporous nanocomposite was considerably lower than those of pure SMX, indicating the efficient function of the mesoporous material as a delivery system. Kinetics of SMX release was also studied using zero‐order, first‐order, Higuchi, and Korsmeyer–Peppas kinetics models. According to the obtained results, the release kinetics was found to obey zero‐order model. So the possibility of sustained release of SMX from the synthesized carrier may be suggested.     

Polyaniline/CoFe2O4 nanocomposite inhibits the growth of Candida albicans 077 by ROS production

In recent years, polyaniline/CoFe₂O₄ nanocomposites have gained attention because of their wide utilization in optoelectronics and biomedical studies. However, very limited research has been carried out on the anticandidal activity of polyaniline/CoFe₂O₄ nanocomposite against Candida spp. Thus, the study was designed to investigate the anticandidal potential of PANI/CoFe₂O₄ nanocomposite against Candida albicans 077. PANI/CoFe₂O₄ nanocomposite (denoted as “cfPNCs”) was synthesized by polymerization of aniline in the presence of CoFe₂O₄ nanoparticles. The structural and thermal properties of the synthesized PANI/CoFe₂O₄ nanocomposite were investigated. It was noteworthy that PANI/CoFe₂O₄ nanocomposite showed promising anticandidal activity in a dose-dependent manner. Results also showed that the protection of histidine (a ROS quencher) against ROS clearly suggested the implication of ROS in anticandidal activity of PANI/CoFe₂O₄ nanocomposite. It is encouraging to conclude that PANI/CoFe₂O₄ nanocomposite bears the potential of their applications in biomedicine, especially nanotherapy for diseases caused by C. albicans.     

Novel CuFe2O4@SiO2‐OP2O5H magnetic nanoparticles: Preparation,characterization and first catalytic application to the synthesis of 1,8‐dioxo‐octahydroxanthenes

New functionalized magnetic core–shell nanoparticles, CuFe₂O₄@SiO₂‐OP₂O₅H, were prepared by grafting of phosphorus pentoxide on CuFe₂O₄@SiO₂ nanoparticles and characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, inductively coupled plasma optical emission spectrometry and vibrating sample magnetometry. The catalytic activity of CuFe₂O₄@SiO₂‐OP₂O₅H as a novel catalyst was evaluated in the synthesis of 1,8‐dioxo‐octahydroxanthenes under solvent‐free conditions. The results showed that the catalyst has high activity and the desired products are obtained in high yields within short reaction times. The catalyst is readily recovered using magnetic decantation and can be used at least four times without noticeable deterioration in catalytic activity.     

Synthesis and characterization of CuFe2O4/NiMgAl-LDH composite for the efficient removal of oxytetracycline antibiotic

In this study, a modified copper ferrite/NiMgAl layered double hydroxide (CuFe₂O₄/NiMgAl-LDH) composite was developed for the adsorptive removal of oxytetracycline hydrochloride (OTC) antibiotic from aqueous solution. Material characterization by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transforms infrared spectrum (FTIR) and X-ray photoelectron spectroscopy (XPS) confirms that the resultant material composes of a hexagonal layered doubled hydroxide structure with surficial deposits on CuFe₂O₄ cubes. The adsorption of OTC onto the prepared materials were studied as a function of solution pH, initial OTC concentration, reaction time and temperature. The OTC adsorption capacities of the prepared materials were as follows: CuFe₂O₄/NiMgAl-LDH composite > NiMgAl-LDH > CuFe₂O₄. The adsorption of OTC in the presence of salts like CuSO₄, NaHCO₃, NaCl were also studied and the results revealed that CuSO₄ has a positive effect on OTC adsorption while NaHCO₃ and NaCl showed the neutral and antagonistic effect. The results revealed that hydrogen bonding, anionic exchange, and electrostatic forces were mainly involved in the adsorption of OTC onto CuFe₂O₄/NiMgAl-LDH composite. OTC adsorption followed the pseudo-second-order kinetic model while the adsorption equilibrium data were well fitted to the Langmuir isotherm model with the maximum adsorption capacity of 192 mg/g at 323K. Furthermore, the thermodynamic study revealed that the adsorption process was spontaneous and endothermic.     

Preparation of CuFe2O4/SiO2 nanocomposite starting from Cu(II)–Fe(III) carboxylates embedded in hybrid silica gels

Nanocomposites of the type 30 % CuFe₂O₄/70 % SiO₂ were synthesized using the modified sol–gel method starting from tetraethylorthosilicate, metal nitrates (Fe(NO₃)₃·9H₂O, Cu(NO₃)₂·3H₂O) and the diol: 1,3-propane diol. The obtained hybrid gel, which contains within the pores, the metal nitrates and diol, was thermally treated at 140 °C, when the redox reaction between metal nitrates and 1,3-propane diol takes place forming Cu(II)–Fe(III) carboxylate compounds of malonate type. The thermal decomposition of the carboxylates within the gels pores, at ~300 °C, leads to simple or mixed metal oxides, uniformly distributed within the amorphous silica matrix. The spinel system CuFe₂O₄/SiO₂ was obtained starting with 700 °C. The evolution of the spinel phase with the annealing temperature was investigated and resulted that at 1,000 °C, the matrix crystallizes into cristobalite and quartz. The formation of bulk CuFe₂O₄, starting from the same type of Cu(II)–Fe(III) carboxylate compounds was also investigated. A comparison between the thermal evolution of bulk CuFe₂O₄ and CuFe₂O₄/SiO₂ starting from Cu(II)–Fe(III) carboxylate compounds was made. The magnetic behavior of the ferrite nanocrystallites depending on the annealing temperature was also investigated.