Realizing Low-Temperature Graphite-based Rechargeable Potassium-Ion Full Battery

Graphite (Gr) has been considered as the most promising anode material for potassium-ion batteries (PIBs) commercialization due to its high theoretical specific capacity and low cost. However, Gr-based PIBs remain unfeasible at low temperature (LT), suffering from either poor kinetics based on conventional carbonate electrolytes or K⁺-solvent co-intercalation issue based on typical ether electrolytes. Herein, a high-performance Gr-based LT rechargeable PIB is realized for the first time by electrolyte chemistry. Applying unidentate-ether-based molecule as the solvent dramatically weakens the K⁺-solvent interactions and lowers corresponding K⁺ de-solvation kinetic barrier. Meanwhile, introduction of steric hindrance suppresses co-intercalation of K⁺-solvent into Gr, greatly elevating operating voltage and cyclability of the full battery. Consequently, the as-prepared Gr||prepotassiated 3,4,9,10-perylene-tetracarboxylicacid-dianhydride (KPTCDA) full PIB can reversibly charge/discharge between −30 and 45 °C with a considerable energy density up to 197 Wh kg_cathode⁻¹ at −20 °C, hopefully facilitating the development of LT PIBs.     

Understanding High‐Rate K+‐Solvent Co‐Intercalation in Natural Graphite for Potassium‐Ion Batteries

Graphite shows great potential as an anode material for rechargeable metal‐ion batteries because of its high abundance and low cost. However, the electrochemical performance of graphite anode materials for rechargeable potassium‐ion batteries needs to be further improved. Reported herein is a natural graphite with superior rate performance and cycling stability obtained through a unique K⁺‐solvent co‐intercalation mechanism in a 1 m KCF₃SO₃ diethylene glycol dimethyl ether electrolyte. The co‐intercalation mechanism was demonstrated by ex situ Fourier transform infrared spectroscopy and in situ X‐ray diffraction. Moreover, the structure of the [K‐solvent]⁺ complexes intercalated with the graphite and the conditions for reversible K⁺‐solvent co‐intercalation into graphite are proposed based on the experimental results and first‐principles calculations. This work provides important insights into the design of natural graphite for high‐performance rechargeable potassium‐ion batteries.     

Flexible graphite film with laser drilling pores as novel integrated anode free of metal current collector for sodium ion battery

In this work, flexible polyimide graphite films with laser drilling pores were prepared by laser drilling pore technique. Then a full cell was built based on the porous graphite film anode, Na₃V₂(PO₄)₃ cathode, and NaPF₆ in diglyme electrolyte. This unique battery system makes the best of co-intercalation mechanism of Na⁺-solvent into porous graphite film host. Moreover, the porous graphite film is directly served as an integrated anode with no electrochemically inactive components, such as binders, conductive agents and metallic current collectors. The above merits allow remarkable progress in electrochemical performance, especially the high energy density and much improved cycle life, which will significantly boost the high energy batteries. Our sodium-ion system is potentially promising power sources for promoting the substantial use of low-cost energy storage systems.     

Ultra-Thin Wrinkled Carbon Sheet as an Anode Material of High-Power-Density Potassium-Ion Batteries

Although K⁺ is readily inserted into graphite, the volume expansion of graphite of up to 60% upon the formation of KC₈, together with its slow diffusion kinetics, prevent graphite from being used as an anode for potassium-ion batteries (PIBs). Soft carbon with low crystallinity and an incompact carbon structure can overcome these shortcomings of graphite. Here, ultra-thin two-dimensional (2D) wrinkled soft carbon sheets (USCs) are demonstrated to have high specific capacity, excellent rate capability, and outstanding reversibility. The wrinkles themselves prevent the dense stacking of micron-sized sheets and provide sufficient space to accommodate the volume change of USCs during the insertion/extraction of K⁺. The ultra-thin property reduces strain during the formation of K-C compounds, and further maintains structural stability. The wrinkles and heteroatoms also introduce abundant edge defects that can provide more active sites and shorten the K⁺ migration distance, improving reaction kinetics. The optimized USC₂₀₋₁ electrode exhibits a reversible capacity of 151 mAh g⁻¹ even at 6400 mA g⁻¹, and excellent cyclic stability up to 2500 cycles at 1000 mA g⁻¹. Such comprehensive electrochemical performance will accelerate the adoption of PIBs in electrical energy applications.     

Mitigating Swelling of the Solid Electrolyte Interphase using an Inorganic Anion Switch for Low-temperature Lithium-ion Batteries

In overcoming the Li⁺ desolvation barrier for low-temperature battery operation, a weakly-solvated electrolyte based on carboxylate solvent has shown promises. In case of an organic-anion-enriched primary solvation sheath (PSS), we found that the electrolyte tends to form a highly swollen, unstable solid electrolyte interphase (SEI) that shows a high permeability to the electrolyte components, accounting for quickly declined electrochemical performance of graphite-based anode. Here we proposed a facile strategy to tune the swelling property of SEI by introducing an inorganic anion switch into the PSS, via LiDFP co-solute method. By forming a low-swelling, Li₃PO₄-rich SEI, the electrolyte-consuming parasitic reactions and solvent co-intercalation at graphite-electrolyte interface are suppressed, which contributes to efficient Li⁺ transport, reversible Li⁺ (de)intercalation and stable structural evolution of graphite anode in high-energy Li-ion batteries at a low temperature of −20 °C.     

Rechargeable Potassium-Ion Full Cells Operating at −40 °C

Potassium-ion batteries (PIBs) are promising for cryogenic energy storage. However, current researches on low-temperature PIBs are limited to half cells utilizing potassium metal as an anode, and realizing rechargeable full cells is challenged by lacking viable anode materials and compatible electrolytes. Herein, a hard carbon (HC)-based low-temperature potassium-ion full cell is successfully fabricated for the first time. Experimental evidence and theoretical analysis revealed that potassium storage behaviors of HC anodes in the matched low-temperature electrolyte involve defect adsorption, interlayer co-intercalation, and nanopore filling. Notably, these unique potassiation processes exhibited low interfacial resistances and small reaction activation energies, enabling an excellent cycling performance of HC with a capacity of 175 mAh g⁻¹ at −40 °C (68 % of its room-temperature capacity). Consequently, the HC-based full cells demonstrated impressive rechargeability and high energy density above 100 Wh kg⁻¹_cathode at −40 °C, representing a significant advancement in the development of PIBs.     

Alkali and alkaline-earth metal ion–solvent co-intercalation reactions in nonaqueous rechargeable batteries

Alkali and alkaline-earth metal ion–solvent co-intercalation reactions have attracted extensive attention in recent years owing to the advantage of the absence of a desolvation process, which generally results in fast kinetics and good rate performance for batteries. However, less attention has been paid to summarizing the mechanism, performance and other related aspects about ion–solvent co-intercalation reaction in batteries. A summary of alkali and alkaline-earth metal ion–solvent co-intercalation reactions in nonaqueous rechargeable batteries is presented in this review, which mainly focuses on the electrochemical performance, ion–solvent co-intercalation mechanism, conditions for reversible ion–solvent co-intercalation and potential for practical application. It is suggested that future research should focus on reducing the redox potential of the ion–solvent co-intercalation reaction to achieve high energy-density and power-density full cells. This review provides an understanding of alkali and alkaline-earth metal ion–solvent co-intercalation reactions in nonaqueous rechargeable batteries and will serve as significant guidance for researchers to further develop ion–solvent co-intercalation reactions for fast-charging batteries.

This review summarizes the recent progress of alkali and alkaline-earth metal ion–solvent co-intercalation reactions in nonaqueous rechargeable batteries.     

K0.67Ni0.17Co0.17Mn0.66O2: A cathode material for potassium-ion battery

A novel layered ternary material K_0.67Ni_0.17Co_0.17Mn_0.66O₂ has been fabricated via a co-precipitation assisted solid-phase method and further evaluated as a cathode for potassium-ion batteries for the first time. Highly reversible K⁺ intercalation/deintercalation is demonstrated in this material. It delivers a reversible capacity of 76.5 mAh/g with average voltage of 3.1 V and shows good cycling performance with capacity retention of 87% after 100 cycles at 20 mA/g. This work may give a new insight into developing cathode materials for potassium-ion batteries.     

Ultrarapid Nanomanufacturing of High-Quality Bimetallic Anode Library toward Stable Potassium-Ion Storage

Bimetallic alloy nanomaterials are promising anode materials for potassium-ion batteries (KIBs) due to their high electrochemical performance. The most well-adopted fabrication method for bimetallic alloy nanomaterials is tube furnace annealing (TFA) synthesis, which can hardly satisfy the trade-off among granularity, dispersity and grain coarsening due to mutual constraints. Herein, we report a facile, scalable and ultrafast high-temperature radiation (HTR) method for the fabrication of a library of ultrafine bimetallic alloys with narrow size distribution (≈10–20 nm), uniform dispersion and high loading. The metal-anchor containing heteroatoms (i.e., O and N), ultrarapid heating/cooling rate (≈10³ K s⁻¹) and super-short heating duration (several seconds) synergistically contribute to the successful synthesis of small-sized alloy anodes. As a proof-of-concept demonstration, the as-prepared BiSb-HTR anode shows ultrahigh stability indicated by negligible degradation after 800 cycles. The in situ X-ray diffraction reveals the K⁺ storage mechanism of BiSb-HTR. This study can shed light on the new, rapid and scalable nanomanufacturing of high-quality bimetallic alloys toward extended applications of energy storage, energy conversion and electrocatalysis.     

Self-Assembled FeSe2 Microspheres with High-Rate Capability and Long-Term Stability as Anode Material for Sodium- and Potassium-Ion Batteries

Sodium- and potassium-ion batteries have attracted intensive attention recently as low-cost alternatives to lithium-ion batteries with naturally abundant resources. However, the large ionic radii of Na⁺ and K⁺ render their slow mobility, leading to sluggish diffusion in host materials. Herein, hierarchical FeSe₂ microspheres assembled by closely packed nano/microrods are rationally designed and synthesized through a facile solvothermal method. Without carbonaceous material incorporation, the electrode delivers a reversible Na⁺ storage capacity of 559 mA h g⁻¹ at a current rate of 0.1 A g⁻¹ and a remarkable rate performance with a capacity of 525 mA h g⁻¹ at 20 A g⁻¹. As for K⁺ storage, the FeSe₂ anode delivers a high reversible capacity of 393 mA h g⁻¹ at 0.4 A g⁻¹. Even at a high current rate of 5 A g⁻¹, a discharge capacity of 322 mA h g⁻¹ can be achieved, which is among the best high-rate anodes for K⁺ storage. The excellent electrochemical performance can be attributed to the favorable morphological structure and the use of an ether-based electrolyte during cycling. Moreover, quantitative study suggests a strong pseudocapacitive contribution, which boosts fast kinetics and interfacial storage.     

Safe,Low‐Cost,Fast‐Kinetics and Low‐Strain Inorganic‐Open‐Framework Anode for Potassium‐Ion Batteries

A key challenge for potassium‐ion batteries is to explore low‐cost electrode materials that allow fast and reversible insertion of large‐ionic‐size K⁺. Here, we report an inorganic‐open‐framework anode (KTiOPO₄), which achieves a reversible capacity of up to 102 mAh g^?1 (307 mAh cm^?3), flat voltage plateaus at a safe average potential of 0.82 V (vs. K/K⁺), a long lifespan of over 200 cycles, and K⁺‐transport kinetics ≈10 times faster than those of Na‐superionic conductors. Combined experimental analysis and first‐principles calculations reveal a charge storage mechanism involving biphasic and solid solution reactions and a cell volume change (9.5 %) even smaller than that for Li⁺‐insertion into graphite (≈10 %). KTiOPO₄ exhibits quasi‐3D lattice expansion on K⁺ intercalation, enabling the disintegration of small lattice strain and thus high structural stability. The inorganic open‐frameworks may open a new avenue for exploring low‐cost, stable and fast‐kinetic battery chemistry.     

Safe,Low‐Cost,Fast‐Kinetics and Low‐Strain Inorganic‐Open‐Framework Anode for Potassium‐Ion Batteries

A key challenge for potassium‐ion batteries is to explore low‐cost electrode materials that allow fast and reversible insertion of large‐ionic‐size K⁺. Here, we report an inorganic‐open‐framework anode (KTiOPO₄), which achieves a reversible capacity of up to 102 mAh g^?1 (307 mAh cm^?3), flat voltage plateaus at a safe average potential of 0.82 V (vs. K/K⁺), a long lifespan of over 200 cycles, and K⁺‐transport kinetics ≈10 times faster than those of Na‐superionic conductors. Combined experimental analysis and first‐principles calculations reveal a charge storage mechanism involving biphasic and solid solution reactions and a cell volume change (9.5 %) even smaller than that for Li⁺‐insertion into graphite (≈10 %). KTiOPO₄ exhibits quasi‐3D lattice expansion on K⁺ intercalation, enabling the disintegration of small lattice strain and thus high structural stability. The inorganic open‐frameworks may open a new avenue for exploring low‐cost, stable and fast‐kinetic battery chemistry.     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Triple-function Hydrated Eutectic Electrolyte for Enhanced Aqueous Zinc Batteries

Aqueous rechargeable zinc-ion batteries (ARZBs) are impeded by the mutual problems of unstable cathode, electrolyte parasitic reactions, and dendritic growth of zinc (Zn) anode. Herein, a triple-functional strategy by introducing the tetramethylene sulfone (TMS) to form a hydrated eutectic electrolyte is reported to ameliorate these issues. The activity of H₂O is inhibited by reconstructing hydrogen bonds due to the strong interaction between TMS and H₂O. Meanwhile, the preferentially adsorbed TMS on the Zn surface increases the thickness of double electric layer (EDL) structure, which provides a shielding buffer layer to suppress dendrite growth. Interestingly, TMS modulates the primary solvation shell of Zn²⁺ ultimately to achieve a novel solvent co-intercalation ((Zn-TMS)²⁺) mechanism, and the intercalated TMS works as a “pillar” that provides more zincophilic sites and stabilizes the structure of cathode (NH₄V₄O₁₀, (NVO)). Consequently, the Zn||NVO battery exhibits a remarkably high specific capacity of 515.6 mAh g⁻¹ at a low current density of 0.2 A g⁻¹ for over 40 days. This multi-functional electrolytes and solvent co-intercalation mechanism will significantly propel the practical development of aqueous batteries.     

Effects of current densities on the formation of LiCoO<Subscript>2</Subscript>/graphite lithium ion battery

The activation characteristics and the effects of current densities on the formation of a separate LiCoO₂ and graphite electrode were investigated and the behavior also was compared with that of the full LiCoO₂/graphite batteries using various electrochemical techniques. The results showed that the formation current densities obviously influenced the electrochemical impedance spectrum of Li/graphite, LiCoO₂/Li, and LiCoO₂/graphite cells. The electrolyte was reduced on the surface of graphite anode between 2.5 and 3.6 V to form a preliminary solid electrolyte interphase (SEI) film of anode during the formation of the LiCoO₂/graphite batteries. The electrolyte was oxidized from 3.95 V vs Li⁺/Li on the surface of LiCoO₂ to form a SEI film of cathode. A highly conducting SEI film could be formed gradually on the surface of graphite anode, whereas the SEI film of LiCoO₂ cathode had high resistance. The LiCoO₂ cathode could be activated completely at the first cycle, while the activation of the graphite anode needed several cycles. The columbic efficiency of the first cycle increased, but that of the second decreased with the increase in the formation current of LiCoO₂/graphite batteries. The formation current influenced the cycling performance of batteries, especially the high-temperature cycling performance. Therefore, the batteries should be activated with proper current densities to ensure an excellent formation of SEI film on the anode surface.     

The Development of Vanadyl Phosphate Cathode Materials for Energy Storage Systems: A Review

Various cathode materials have been proposed for high-performance rechargeable batteries. Vanadyl phosphate is an important member of the polyanion cathode family. VOPO₄ has seven known crystal polymorphs with tunneled or layered frameworks, which allow facile cation (de)intercalations. Two-electron transfer per formula unit can be realized by using V^V/V^IV and V^IV/V^III redox couples. The electrochemical performance is closely related to the structures of VOPO₄ and the types of inserted cations. This Review outlines the crystal structures of VOPO₄ polymorphs and their lithiated phases. The research progress of vanadyl phosphate cathode materials for different energy storage systems, including lithium-ion batteries, sodium-ion batteries, potassium-ion batteries, multivalent batteries, and supercapacitors, as well as the related mechanism investigations are summarized. It is hoped that this Review will help with future directions of using vanadyl phosphate materials for energy storage.     

A Black Phosphorus–Graphite Composite Anode for Li‐/Na‐/K‐Ion Batteries

Black phosphorus (BP) is a desirable anode material for alkali metal ion storage owing to its high electronic/ionic conductivity and theoretical capacity. In‐depth understanding of the redox reactions between BP and the alkali metal ions is key to reveal the potential and limitations of BP, and thus to guide the design of BP‐based composites for high‐performance alkali metal ion batteries. Comparative studies of the electrochemical reactions of Li⁺, Na⁺, and K⁺ with BP were performed. Ex situ X‐ray absorption near‐edge spectroscopy combined with theoretical calculation reveal the lowest utilization of BP for K⁺ storage than for Na⁺ and Li⁺, which is ascribed to the highest formation energy and the lowest ion diffusion coefficient of the final potassiation product K₃P, compared with Li₃P and Na₃P. As a result, restricting the formation of K₃P by limiting the discharge voltage achieves a gravimetric capacity of 1300 mAh g^?1 which retains at 600 mAh g^?1 after 50 cycles at 0.25 A g^?1.     

Dynamic Hydrogen-Bond Network as a Modulator of Bismuth–Antimony Complex Anodes for Self-Healable and Wider Temperature Adaptive Potassium Ion Batteries

Antimony (Sb)-based anodes are attractive candidates in potassium-ion batteries (PIBs) due to their superior capacities and rational potassium inserting voltages. However, the sluggish kinetics and poor interface compatibility severely hinder practical application. Herein, Bi_0.67Sb_1.33S₃ nanospheres embedded into in situ formed poly(3,4-ethylenedioxythiophene) crosslinked with polythioctic acid (PET@PTA) (Bi_0.67Sb_1.33S₃/PET@PTA) were elaborately conceptualized with hydrogen bonds exchangeable binding (HBEB) sites. Bi_0.67Sb_1.33S₃/PET@PTA exhibits notable self-healing ability and wider temperature adaptability. Bi_0.67Sb_1.33S₃/PET@PTA displays an impressive capacity of 819 mAh g⁻¹ at 0.05 A g⁻¹, prominent cycle ability with a 73 % capacity conservation after 500 cycles at 2 A g⁻¹, and high capacity retention of 66 % and 84 % at −40 and 70 °C to that case at room temperature, respectively, for potassium storage. This work provides a new perspective for HBEB sites in maximizing the desirable K⁺ storage performance.     

A Black Phosphorus–Graphite Composite Anode for Li-/Na-/K-Ion Batteries

Black phosphorus (BP) is a desirable anode material for alkali metal ion storage owing to its high electronic/ionic conductivity and theoretical capacity. In-depth understanding of the redox reactions between BP and the alkali metal ions is key to reveal the potential and limitations of BP, and thus to guide the design of BP-based composites for high-performance alkali metal ion batteries. Comparative studies of the electrochemical reactions of Li⁺, Na⁺, and K⁺ with BP were performed. Ex situ X-ray absorption near-edge spectroscopy combined with theoretical calculation reveal the lowest utilization of BP for K⁺ storage than for Na⁺ and Li⁺, which is ascribed to the highest formation energy and the lowest ion diffusion coefficient of the final potassiation product K₃P, compared with Li₃P and Na₃P. As a result, restricting the formation of K₃P by limiting the discharge voltage achieves a gravimetric capacity of 1300 mAh g⁻¹ which retains at 600 mAh g⁻¹ after 50 cycles at 0.25 A g⁻¹.     

Rechargeable Room‐Temperature Na–CO2 Batteries

Developing rechargeable Na–CO₂ batteries is significant for energy conversion and utilization of CO₂. However, the reported batteries in pure CO₂ atmosphere are non‐rechargeable with limited discharge capacity of 200 mAh g^?1. Herein, we realized the rechargeability of a Na–CO₂ battery, with the proposed and demonstrated reversible reaction of 3 CO₂+4 Na?2 Na₂CO₃+C. The battery consists of a Na anode, an ether‐based electrolyte, and a designed cathode with electrolyte‐treated multi‐wall carbon nanotubes, and shows reversible capacity of 60000 mAh g^?1 at 1 A g^?1 (≈1000 Wh kg^?1) and runs for 200 cycles with controlled capacity of 2000 mAh g^?1 at charge voltage <3.7 V. The porous structure, high electro‐conductivity, and good wettability of electrolyte to cathode lead to reduced electrochemical polarization of the battery and further result in high performance. Our work provides an alternative approach towards clean recycling and utilization of CO₂.