双硫腙后处理诱导的钙钛矿膜二次结晶和钝化

有机-无机杂化钙钛矿较低的缺陷形成能和表面的悬挂键会导致其薄膜中产生铅缺陷.这些深能级缺陷会直接引起载流子的非辐射复合,导致有机-无机杂化钙钛矿光伏器件的界面接触和载流子传输效率变差,最终降低了器件的综合性能.采用双硫腙作为钙钛矿薄膜表面的二次结晶诱导剂和铅缺陷钝化剂,通过对钙钛矿膜进行后处理的方法实现对钙钛矿薄膜的形...     

Observing Defect Passivation of the Grain Boundary with 2‐Aminoterephthalic Acid for Efficient and Stable Perovskite Solar Cells

Metal halide perovskite solar cells (PSCs), with their exceptional properties, show promise as photoelectric converters. However, defects in the perovskite layer, particularly at the grain boundaries (GBs), seriously restrict the performance and stability of PSCs. Now, a simple post‐treatment procedure involves applying 2‐aminoterephthalic acid to the perovskite to produce efficient and stable PSCs. By optimizing the post‐treatment conditions, we created a device that achieved a remarkable power conversion efficiency (PCE) of 21.09 % and demonstrated improved stability. This improvement was attributed to the fact that the 2‐aminoterephthalic acid acted as a cross‐linking agent that inhibited the migration of ions and passivated the trap states at GBs. These findings provide a potential strategy for designing efficient and stable PSCs regarding the aspects of defect passivation and crystal growth.     

Limiting Perovskite Solar Cell Performance by Heterogeneous Carrier Extraction

Although the power conversion efficiency of perovskite solar cells has improved rapidly, a rational path for further improvement remains unclear. The effect of large morphological heterogeneity of polycrystalline perovskite films on their device performance by photoluminescence (PL) microscopy has now been studied. Contrary to the common belief on the deleterious effect of morphological heterogeneity on carrier lifetimes and diffusivities, in neat CH₃NH₃PbI₃(Cl) polycrystalline perovskite films, the local (intra‐grain) carrier diffusivities in different grains are all surprisingly high (1.5 to 3.3 cm² s^?1; comparable to bulk single‐crystals), and the local carrier lifetimes are long (ca. 200 ns) and surprisingly homogenous among grains, and uniform across grain boundary and interior. However, there is a large heterogeneity of carrier extraction efficiency at the perovskite grain–electrode interface. Improving homogeneity at perovskite grain–electrode contacts is thus a promising direction for improving the performance of perovskite thin‐film solar cells.     

In Quest of Environmentally Stable Perovskite Solar Cells: A Perspective

Inorganic-organic halide perovskites pose a once-in-a-generation opportunity to revolutionize photovoltaic technology as they are excellent semiconductor candidates with a combination of many desirable attributes. Specifically, halide perovskite solar cells with extremely high device efficiency are easily fabricated and present great promise for commercialization in the near future. However, their non-ideal environmental stability under real operating conditions can limit their further development. Both the academic and industrial research communities have been devoting considerable effort to overcome this critical deficiency through material and device engineering. Significant progress has been reported in this direction, and in this perspective, we review the recent strategies that promise to improve solar cell stability focusing on two interwoven topics. The first one is the development of environmentally stable semiconductor materials, while the second one is dedicated to the reported progress in improving solar cell device stability. Although, the currently adopted methods have not resolved the above problems, yet they build a foundation of principles for future advances to overcome them. In this regard, we believe commercial perovskite-related photovoltaics might indeed be on the horizon, not only replacing the currently commercially available ones, but also improving them.     

Efficient and Stable Thin‐Film Luminescent Solar Concentrators Enabled by Near‐Infrared Emission Perovskite Nanocrystals

A novel triphenylphosphine (TPP) treatment strategy was developed to prepare the near‐infrared emission CsPbI₃ nanocrystal (NC)‐polymer composite thin‐film luminescent solar concentrators (LSCs) featuring high absolute photoluminescence quantum yield (PLQY), low reabsorption, and high stability. The PL emission of the LSCs is centered at about 700 nm with 99.4±0.4 % PLQY and narrow full width at half maximum (FWHM) of 75 meV (30 nm). Compared with LSCs prepared with classic CsPbI₃ NCs, the stability of the LSCs after TPP treatments has been greatly improved, even after long‐term (30 days) immersion in water and strong mercury‐lamp irradiation (50 mW cm^?2). Owing to the presence of lone‐pair electrons on the phosphorus atom, TPP is also used as a photoinitiator, with higher efficiency than other common photoinitiators. Large‐area (ca. 75 cm²) infrared LSCs were achieved with a high optical conversion efficiency of 3.1 % at a geometric factor of 10.     

Exploring the Effect of Ammonium Iodide Salts Employed in Multication Perovskite Solar Cells with a Carbon Electrode

Perovskite solar cells that use carbon (C) as a replacement of the typical metal electrodes, which are most commonly employed, have received growing interest over the past years, owing to their low cost, ease of fabrication and high stability under ambient conditions. Even though Power Conversion Efficiencies (PCEs) have increased over the years, there is still room for improvement, in order to compete with metal-based devices, which exceed 25% efficiency. With the scope of increasing the PCE of Carbon based Perovskite Solar Cells (C-PSCs), in this work we have employed a series of ammonium iodides (ammonium iodide, ethylammonium iodide, tetrabutyl ammonium iodide, phenethylammonium iodide and 5-ammonium valeric acid iodide) as additives in the multiple cation-mixed halide perovskite precursor solution. This has led to a significant increase in the PCE of the corresponding devices, by having a positive impact on the photocurrent values obtained, which exhibited an increase exceeding 20%, from 19.8 mA/cm², for the reference perovskite, to 24 mA/cm², for the additive-based perovskite. At the same time, the ammonium iodide salts were used in a post-treatment method. By passivating the defects, which provide charge recombination centers, an improved performance of the C-PSCs has been achieved, with enhanced FF values reaching 59%, which is a promising result for C-PSCs, and V_oc values up to 850 mV. By combining the results of these parallel investigations, C-PSCs of the triple mesoscopic structure with a PCE exceeding 10% have been achieved, while the in-depth investigation of the effects of ammonium iodides in this PSC structure provide a fruitful insight towards the optimum exploitation of interface and bulk engineering, for high efficiency and stable C-PSCs, with a structure that is favorable for large area applications.     

Dimethylammonium Cation-Induced 1D/3D Heterostructure for Efficient and Stable Perovskite Solar Cells

Mixed-dimensional perovskite engineering has been demonstrated as a simple and useful approach to achieving highly efficient and more-durable perovskite solar cells (PSCs), which have attracted increasing research interests worldwide. In this work, 1D/3D mixed-dimensional perovskite has been successfully obtained by introducing DMAI via a two-step deposition method. The additive DMA⁺ can facilitate the crystalline growth and form 1D DMAPbI₃ at grain boundaries of 3D perovskite, leading to improved morphology, longer charge carrier lifetime, and remarkably reduced bulk trap density for perovskite films. Meanwhile, the presence of low-dimension perovskite is able to prevent the intrusion of moisture, resulting in enhanced long-term stability. As a result, the PSCs incorporated with 1D DMAPbI₃ exhibited a first-class power conversion efficiency (PCE) of 21.43% and maintained 85% of their initial efficiency after storage under ambient conditions with ~45% RH for 1000 h.     

A Lead Iodide Perovskite Based on a Large Organic Cation for Solar Cell Applications

Methylammonium (CH₃NH₃⁺) and formamidinium ((NH₂)₂CH⁺) based lead iodide perovskites are currently the two commonly used organic–inorganic lead iodide perovskites. There are still no alternative organic cations that can produce perovskites with band gaps spanning the visible spectrum (that is, <1.7 eV) for solar cell applications. Now, a new perovskite using large propane‐1,3‐diammonium cation (1,3‐Pr(NH₃)₂²⁺) with a chemical structure of (1,3‐Pr(NH₃)₂)_0.5PbI₃ is demonstrated. X‐ray diffraction (XRD) shows that the new perovskite exhibits a three‐dimensional tetragonal phase. The band gap of the new perovskite is about 1.6 eV, which is desirable for photovoltaic applications. A (1,3‐Pr(NH₃)₂)_0.5PbI₃ perovskite solar cell (PSC) yields a power conversion efficiency (PCE) of 5.1 %. More importantly, this perovskite is composed of a large hydrophobic cation that provides better moisture resistance compared to CH₃NH₃PbI₃ perovskite.     

Stabilization of Highly Efficient and Stable Phase-Pure FAPbI3 Perovskite Solar Cells by Molecularly Tailored 2D-Overlayers

As a result of their attractive optoelectronic properties, metal halide APbI₃ perovskites employing formamidinium (FA⁺) as the A cation are the focus of research. The superior chemical and thermal stability of FA⁺ cations makes α-FAPbI₃ more suitable for solar-cell applications than methylammonium lead iodide (MAPbI₃). However, its spontaneous conversion into the yellow non-perovskite phase (δ-FAPbI₃) under ambient conditions poses a serious challenge for practical applications. Herein, we report on the stabilization of the desired α-FAPbI₃ perovskite phase by protecting it with a two-dimensional (2D) IBA₂FAPb₂I₇ (IBA=iso-butylammonium overlayer, formed via stepwise annealing. The α-FAPbI₃/IBA₂FAPb₂I₇ based perovskite solar cell (PSC) reached a high power conversion efficiency (PCE) of close to 23 %. In addition, it showed excellent operational stability, retaining around 85 % of its initial efficiency under severe combined heat and light stress, that is, simultaneous exposure with maximum power tracking to full simulated sunlight at 80 °C over 500 h.     

A peri-Xanthenoxanthene Centered Columnar-Stacking Organic Semiconductor for Efficient,Photothermally Stable Perovskite Solar Cells

Modulating the structure and property of hole-transporting organic semiconductors is of paramount importance for high-efficiency and stable perovskite solar cells (PSCs). This work reports a low-cost peri-xanthenoxanthene based small-molecule P1, which is prepared at a total yield of 82 % using a three-step synthetic route from the low-cost starting material 2-naphthol. P1 molecules stack in one-dimensional columnar arrangement characteristic of strong intermolecular π–π interactions, contributing to the formation of a solution-processed, semicrystalline thin-film exhibiting one order of magnitude higher hole mobility than the amorphous one based on the state-of-the art hole-transporter, 2,2-7,7-tetrakis(N,N′-di-paramethoxy-phenylamine 9,9′-spirobifluorene (spiro-OMeTAD). PSCs employing P1 as the hole-transporting layer attain a high efficiency of 19.8 % at the standard AM 1.5 G conditions, and good long-term stability under continuous full sunlight exposure at 40 °C.     

Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells

In several photovoltaic (PV) technologies, the presence of electronic defects within the semiconductor band gap limit the efficiency, reproducibility, as well as lifetime. Metal halide perovskites (MHPs) have drawn great attention because of their excellent photovoltaic properties that can be achieved even without a very strict film‐growth control processing. Much has been done theoretically in describing the different point defects in MHPs. Herein, we discuss the experimental challenges in thoroughly characterizing the defects in MHPs such as, experimental assignment of the type of defects, defects densities, and the energy positions within the band gap induced by these defects. The second topic of this Review is passivation strategies. Based on a literature survey, the different types of defects that are important to consider and need to be minimized are examined. A complete fundamental understanding of defect nature in MHPs is needed to further improve their optoelectronic functionalities.     

Managing Multiple Halide-Related Defects for Efficient and Stable Inorganic Perovskite Solar Cells

Halide-related surface defects on inorganic halide perovskite not only induce charge recombination but also severely limit the long-term stability of perovskite solar cells. Herein, adopting density functional theory calculation, we verify that iodine interstitials (I_i) has a low formation energy similar to that of the iodine vacancy (V_I) and is also readily formed on the surface of all-inorganic perovskite, and it is regarded to function as an electron trap. We screen a specific 2,6-diaminopyridine (2,6-DAPy) passivator, which, with the aid of the combined effects from halogen-N_pyridine and coordination bonds, not only successfully eliminates the I_i and dissociative I₂ but also passivates the abundant V_I. Furthermore, the two symmetric neighboring -NH₂ groups interact with adjacent halides of the octahedral cluster by forming hydrogen bonds, which further promotes the adsorption of 2,6-DAPy molecules onto the perovskite surface. Such synergetic effects can significantly passivate harmful iodine-related defects and undercoordinated Pb²⁺, prolong carrier lifetimes and facilitate the interfacial hole transfer. Consequently, these merits enhance the power-conversion efficiency (PCE) from 19.6 % to 21.8 %, the highest value for this type of solar cells, just as importantly, the 2,6-DAPy-treated CsPbI_3−xBr_x films show better environmental stability.     

反式锡基钙钛矿光伏电池的制备及稳定性策略

近年来,钙钛矿光伏电池（PSCs）取得了突飞猛进的发展,迄今最高认证光电转换效率达到25.7%,但是钙钛矿材料常使用有毒的重金属元素铅,对环境和人体都有极大的危害,不利于其实际应用,因此发展无铅PSCs受到越来越多的关注。锡基钙钛矿材料具有优异的光电性质,特别是带隙窄、载流子迁移率高和激子复合能低,是无铅钙钛矿中最具有潜力的材料。反式（p-i-n型）锡基PSCs由于低迟滞效应、可低温制备及低成本等优点获得普遍关注,取得了一系列重要突破,目前最高效率已经突破14%,具有巨大的发展潜力。鉴于反式锡基钙钛矿太阳能的迅速发展,本文系统综述了反式锡基PSCs制备及稳定性研究进展,尤其关注反式锡基PSCs的界面修饰、锡基钙钛矿材料性能、构筑高质量锡基钙钛矿薄膜的方法以及提高稳定性的策略,并讨论了锡基PSCs的前景展望。     

Highly Efficient Perovskite Solar Cells Employing an Easily Attainable Bifluorenylidene‐Based Hole‐Transporting Material

The 4,4′‐dimethoxydiphenylamine‐substituted 9,9′‐bifluorenylidene ( KR216 ) hole transporting material has been synthesized using a straightforward two‐step procedure from commercially available and inexpensive starting reagents, mimicking the synthetically challenging 9,9′‐spirobifluorene moiety of the well‐studied spiro‐OMeTAD. A power conversion efficiency of 17.8 % has been reached employing a novel HTM in a perovskite solar cells.     

When Aggregation-Induced Emission Meets Perovskites: Efficient Defect-Passivation and Charge-Transfer for Ambient Fabrication of Perovskite Solar Cells

The intrinsic defects in perovskite film can serve as non-radiative recombination center to limit the performance and stability of metal halide perovskite solar cells (PSCs). The additive engineering in perovskite film is always applied to produce high-efficiency PSCs in recent years. Here, a typical donor-acceptor (D−A) structured aggregation-induced emission (AIE) molecule tetraphenylethene-2-dicyano-methylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran (TPE-TCF) was introduced into perovskite film. The D−A structure of TPE-TCF molecule provided additional charge transfer channels, contributing to transporting electron of TPE-TCF-based device. The cyano (C≡N) of TPE-TCF can interact with the uncoordinated Pb to from a relatively stable intermediate, PbI₂⋅TPE-TCF, resulting in the slower crystal growth, reduced the defects at the grain boundaries and suppressed carrier recombination. As a consequence, the power conversion efficiency (PCE) of TPE-TCF-modified PSCs achieved a remarkably enhanced from 15.63 to 19.66 % with negligible hysteresis, which was prominent in methylammonium lead iodide-based devices fabricated under ambient condition. Furthermore, the PSCs modified by AIE molecule possessed an outstanding stability and maintain about 86 % of the initial PCE after 300 h storage in air at 25–35 °C with a high relative humidity (RH) of ≈85 %. This work suggests that incorporating AIE molecule into perovskite is a promising strategy for facilitating high-performance PSCs commercialization in ambient environment without glovebox.     

Novel Push-Pull Benzodithiophene-Containing Polymers as Hole-Transport Materials for Efficient Perovskite Solar Cells

Donor-acceptor conjugated polymers are considered advanced semiconductor materials for the development of thin-film electronics. One of the most attractive families of polymeric semiconductors in terms of photovoltaic applications are benzodithiophene-based polymers owing to their highly tunable electronic and physicochemical properties, and readily scalable production. In this work, we report the synthesis of three novel push–pull benzodithiophene-based polymers with different side chains and their investigation as hole transport materials (HTM) in perovskite solar cells (PSCs). It is shown that polymer P3 that contains triisopropylsilyl side groups exhibits better film-forming ability that, along with high hole mobilities, results in increased characteristics of PSCs. Encouraging a power conversion efficiency (PCE) of 17.4% was achieved for P3-based PSCs that outperformed the efficiency of devices based on P1, P2, and benchmark PTAA polymer. These findings feature the great potential of benzodithiophene-based conjugated polymers as dopant-free HTMs for the fabrication of efficient perovskite solar cells.     

Retardation of Trap-Assisted Recombination in Lead Halide Perovskite Solar Cells by a Dimethylbiguanide Anchor Layer

Reaching the full potential of solar cells based on photo-absorbers of organic-inorganic hybrid perovskites requires highly efficient charge extraction at the interface between perovskite and charge transporting layer. This demand is generally challenged by the presence of under-coordinated metal or halogen ions, causing surface charge trapping and resultant recombination losses. These problems can be tackled by introducing a small molecule interfacial anchor layer based on dimethylbiguanide (DMBG). Benefitting from interactions between the nitrogen-containing functional groups in DMBG and unsaturated ions in CH₃NH₃PbI₃ perovskites, the electron extraction of TiO₂ is dramatically improved in association with reduced Schottky–Read–Hall recombination, as revealed by photoluminescence spectroscopy. As a consequence, the power conversion efficiency of CH₃NH₃PbI₃ solar cells is boosted from 17.14 to 19.1 %, showing appreciably reduced hysteresis. The demonstrated molecular strategy based on DMBG enables one to achieve meliorations on key figures of merit in halide perovskite solar cells with improved stability.     

Targeted Management of Perovskite Film by Co(II) Sulfophenyl Porphyrin for Efficient and Stable Solar Cells†

In the lead halide perovskite solar cells (PSCs), the redox reaction of I^– and Pb²⁺ ions in perovskite materials under the fabrication and operation processes causes the formation of defects to destroy the cell efficiency and long-term stability. Herein, we have employed a Co(II) sulfophenyl porphyrin (CoTPPS) to modify the perovskite film. The sulfonic group could coordinate with Pb²⁺ to efficiently passivate the uncoordinated Pb²⁺. Additionally, Co²⁺ ions in CoTPPS could react with I₂ generated under the thermal and light stress to yield the Co³⁺ and I^–, thus achieving the regeneration of I^– in perovskite film. Therefore, the CoTPPS could realize the targeted management of the imperfections in perovskite film. As a result, the modified PSCs reveal the remarkably enhanced cell performance. More importantly, the CoTPPS modified device retains 75% of its initial efficiency value storing at 85°C for 2000 h and about 70% of its efficiency when being continuously illuminated at a simulated sunlight for 1200 h. This strategy tackles the chemical reaction and inhibits the defect generation, thus improving the operational stability and efficiency of PSCs.      

All‐Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Recently, lead halide‐based perovskites have become one of the hottest topics in photovoltaic research because of their excellent optoelectronic properties. Among them, organic‐inorganic hybrid perovskite solar cells (PSCs) have made very rapid progress with their power conversion efficiency (PCE) now at 23.7 %. However, the intrinsically unstable nature of these materials, particularly to moisture and heat, may be a problem for their long‐term stability. Replacing the fragile organic group with more robust inorganic Cs⁺ cations forms the cesium lead halide system (CsPbX₃, X is halide) as all‐inorganic perovskites which are much more thermally stable and often more stable to other factors. From the first report in 2015 to now, the PCE of CsPbX₃‐based PSCs has abruptly increased from 2.9 % to 17.1 % with much enhanced stability. In this Review, we summarize the field up to now, propose solutions in terms of development bottlenecks, and attempt to boost further research in CsPbX₃ PSCs.