Intermediate Formation of Macrocycles for Efficient Crystallization of 2D Covalent Organic Frameworks with Enhanced Photocatalytic Hydrogen Evolution

Covalent organic frameworks (COFs) have gained significant attention as key photocatalysts for efficient solar light conversion into hydrogen production. Unfortunately, the harsh synthetic conditions and intricate growth process required to obtain highly crystalline COFs greatly hinder their practical application. Herein, we report a simple strategy for the efficient crystallization of 2D COFs based on the intermediate formation of hexagonal macrocycles. Mechanistic investigation suggests that the use of 2,4,6-triformyl resorcinol (TFR) as the asymmetrical aldehyde build block allows the equilibration between irreversible enol-to-keto tautomerization and dynamic imine bonds to produce the hexagonal β-ketoenamine-linked macrocycles, the formation of which could provide COFs with high crystallinity in half hour. We show that COF-935 with 3 wt % Pt as cocatalyst exhibit a high hydrogen evolution rate of 67.55 mmol g⁻¹ h⁻¹ for water splitting when exposed to visible light. More importantly, COF-935 exhibits an average hydrogen evolution rate of 19.80 mmol g⁻¹ h⁻¹ even at a low loading of only 0.1 wt % Pt, which is a significant breakthrough in this field. This strategy would provide valuable insights into the design of highly crystalline COFs as efficient organic semiconductor photocatalysts.     

Thiophene-based covalent organic frameworks for highly efficient iodine capture

Development of adsorbent materials for highly efficient iodine capture is high demand from the perspective of ecological environment and human health. Herein, the two kinds of thiophene-based covalent organic frameworks (COFs) with different morphologies were synthesized by solvothermal reaction using thieno[3,2-b]thiophene-2,5-dicarbaldehyde (TT) as the aldehyde monomer and tri(4-aminophenyl)benzene (PB) or tris(4-aminophenyl)amine (PA) as the amino monomer (denoted as PB-TT COF and PA-TT COF) and the as-prepared two heteroatoms-rich COFs possessed many excellent properties, including high thermal stability and abundant binding sites. Among them, PB-TT COF exhibited ultra-high iodine uptake up to 5.97 g/g in vapor, surpassing most of adsorbents previously reported, which was ascribed to its high specific surface (1305.3 m²/g). Interestingly, PA-TT COF with low specific surface (48.6 m²/g) showed good adsorption ability for iodine in cyclohexane solution with uptake value of 750 mg/g, which was 2.38 times higher than that obtained with PB-TT COF due to its unique sheet-like morphology. Besides, the two COFs possessed good reusability, high selectivity and iodine retention ability. Based on experimental results, the adsorption mechanisms of both COFs were studied, revealing that iodine was captured by the physical-chemical adsorption. Furthermore, the both COFs showed excellent adsorption ability in real radioactive seawater treated safely, demonstrating their great potential in real environment.     

Experimental and theoretical insights into copper phthalocyanine-based covalent organic frameworks for highly efficient radioactive iodine capture

Exploring efficient materials for capturing radioactive iodine in nuclear waste is of great significance for the progress of nuclear energy as well as the protection of ecological environment. Covalent organic frameworks (COFs) have emerged as promising adsorbents because of their predesignable and functionalizable skeleton structures. However, it remains a grand challenge to achieve large scale preparation of COFs. In this work, we developed a mild and efficient microwave irradiation method instead of the traditional solvothermal method to prepare copper phthalocyanine-based covalent organic frameworks (Cu_xPc-COFs) within only 15 min. The nitrogen-rich 1,2,4,5-tetracarbonitrilebenzene (TCNB) was selected as the solely organic ligand to construct copper phthalocyanine-based 2D conjugated COFs. The resultant Cu_xPc-COFs exhibited excellent iodine enrichment with 2.99 g/g for volatile iodine and 492.27 mg/g for iodine-cyclohexane solution, respectively, outperforming that of many porous materials. As indicated by spectroscopic analysis and DFT calculations, this impressive adsorption performance can be attributed to the charge transfer arising from nitrogen-rich phthalocyanine structures and electron-rich π-conjugated systems with iodine molecules. Moreover, the strong electrostatic interaction between Cu(II) on chelate centers and polyiodide anions (I_x^?) also play an important role in the firmly trapping radioactive iodine. Therefore, this study provides a facile and intelligent approach to implement metal-based COFs for the remediation of toxic radioactive iodine.     

Multicomponent Synthesis of Imidazole-Linked Fully Conjugated 3D Covalent Organic Framework for Efficient Electrochemical Hydrogen Peroxide Production

The semiconducting properties and applications of three dimensional (3D) covalent organic frameworks (COFs) are greatly hampered because of their long-ranged non-conjugated skeletons and relatively unstable linkages. Here, a robust imidazole-linked fully conjugated 3D covalent organic framework (BUCT-COF-7) is synthesized through the one-pot multicomponent Debus-Radziszewski reaction of the saddle-shaped aldehyde-substituted cyclooctatetrathiophene, pyrene-4,5,9,10-tetraone, and ammonium acetate. The semiconducting BUCT-COF-7, as a metal-free catalyst, shows excellent two electron oxygen reduction reaction (ORR) activity in alkaline medium with high hydrogen peroxide (H₂O₂) selectivity of 83.4 %. When the BUCT-COF-7 as cathode catalyst is assembled into the electrolyzer, the devices showed high electrochemical production rate of H₂O₂ up to 326.9 mmol g⁻¹ h⁻¹. The accumulative amount of H₂O₂ could totally degrade the dye methylene blue via Fenton reaction for wastewater treatment. This is the first report about intrinsic 3D COFs for efficient electrochemical synthesis of H₂O₂, revealing the promising applications of fully conjugated 3D COFs in the environment-related field.     

Tetrathiafulvalene-based covalent organic frameworks for ultrahigh iodine capture

To safeguard the development of nuclear energy, practical techniques for capture and storage of radioiodine are of critical importance but remain a significant challenge. Here we report the synergistic effect of physical and chemical adsorption of iodine in tetrathiafulvalene-based covalent organic frameworks (COFs), which can markedly improve both iodine adsorption capacity and adsorption kinetics due to their strong interaction. These functionalized architectures are designed to have high specific surface areas (up to 2359 m² g⁻¹) for efficient physisorption of iodine, and abundant tetrathiafulvalene functional groups for strong chemisorption of iodine. We demonstrate that these frameworks achieve excellent iodine adsorption capacity (up to 8.19 g g⁻¹), which is much higher than those of other materials reported so far, including silver-doped adsorbents, inorganic porous materials, metal–organic frameworks, porous organic frameworks, and other COFs. Furthermore, a combined theoretical and experimental study, including DFT calculations, electron paramagnetic resonance spectroscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy, reveals the strong chemical interaction between iodine and the frameworks of the materials. Our study thus opens an avenue to construct functional COFs for a critical environment-related application.

The synergistic effect of physical and chemical adsorption of iodine in tetrathiafulvalene-based covalent organic frameworks (COFs) has been explored. The iodine adsorption capacity of these materials is higher than other materials reported so far.     

Record Ultralarge-Pores,Low Density Three-Dimensional Covalent Organic Framework for Controlled Drug Delivery**

The unique structural characteristics of three-dimensional (3D) covalent organic frameworks (COFs) like high surface areas, interconnected pore system and readily accessible active sites render them promising platforms for a wide set of functional applications. Albeit promising, the reticular construction of 3D COFs with large pores is a very demanding task owing to the formation of interpenetrated frameworks. Herein we report the designed synthesis of a 3D non-interpenetrated stp net COF, namely TUS-64, with the largest pore size of all 3D COFs (47 Å) and record-low density (0.106 g cm⁻³) by reticulating a 6-connected triptycene-based linker with a 4-connected porphyrin-based linker. Characterized with a highly interconnected mesoporous scaffold and good stability, TUS-64 shows efficient drug loading and controlled release for five different drugs in simulated body fluid environment, demonstrating the competency of TUS-64 as drug nanocarriers.     

One-Dimensional Covalent Organic Frameworks for the 2e− Oxygen Reduction Reaction

Two-dimensional covalent organic frameworks (2D COFs) are often employed for electrocatalytic systems because of their structural diversity. However, the efficiency of atom utilization is still in need of improvement, because the catalytic centers are located in the basal layers and it is difficult for the electrolytes to access them. Herein, we demonstrate the use of 1D COFs for the 2e⁻ oxygen reduction reaction (ORR). The use of different four-connectivity blocks resulted in the prepared 1D COFs displaying good crystallinity, high surface areas, and excellent chemical stability. The more exposed catalytic sites resulted in the 1D COFs showing large electrochemically active surface areas, 4.8-fold of that of a control 2D COF, and thus enabled catalysis of the ORR with a higher H₂O₂ selectivity of 85.8 % and activity, with a TOF value of 0.051 s⁻¹ at 0.2 V, than a 2D COF (72.9 % and 0.032 s⁻¹). This work paves the way for the development of COFs with low dimensions for electrocatalysis.     

Poly(benzimidazobenzophenanthroline)-Ladder-Type Two-Dimensional Conjugated Covalent Organic Framework for Fast Proton Storage**

Electrochemical proton storage plays an essential role in designing next-generation high-rate energy storage devices, e.g., aqueous batteries. Two-dimensional conjugated covalent organic frameworks (2D c-COFs) are promising electrode materials, but their competitive proton and metal-ion insertion mechanisms remain elusive, and proton storage in COFs is rarely explored. Here, we report a perinone-based poly(benzimidazobenzophenanthroline) (BBL)-ladder-type 2D c-COF for fast proton storage in both a mild aqueous Zn-ion electrolyte and strong acid. We unveil that the discharged C−O⁻ groups exhibit largely reduced basicity due to the considerable π-delocalization in perinone, thus affording the 2D c-COF a unique affinity for protons with fast kinetics. As a consequence, the 2D c-COF electrode presents an outstanding rate capability of up to 200 A g⁻¹ (over 2500 C), surpassing the state-of-the-art conjugated polymers, COFs, and metal–organic frameworks. Our work reports the first example of pure proton storage among COFs and highlights the great potential of BBL-ladder-type 2D conjugated polymers in future energy devices.     

2D and 3D Porphyrinic Covalent Organic Frameworks: The Influence of Dimensionality on Functionality

The construction of 2D and 3D covalent organic frameworks (COFs) from functional moieties for desired properties has gained much attention. However, the influence of COFs dimensionality on their functionalities, which can further assist in COF design, has never been explored. Now, by selecting designed precursors and topology diagrams, 2D and 3D porphyrinic COFs (2D‐PdPor‐COF and 3D‐PdPor‐COF) are synthesized. By model building and Rietveld refinement of powder X‐ray diffraction, 2D‐PdPor‐COF crystallizes as 2D sheets while 3D‐PdPor‐COF adopts a five‐fold interpenetrated pts topology. Interestingly, compared with 2D‐PdPor‐COF, 3D‐PdPor‐COF showed interesting properties, including 1) higher CO₂ adsorption capacity; 2) better photocatalytic performance; and 3) size‐selective photocatalysis. Based on this study, we believe that with the incorporation of functional moieties, the dimensionality of COFs can definitely influence their functionalities.     

Synthesizing Interpenetrated Triazine-based Covalent Organic Frameworks from CO2

Crystalline triazine-based covalent organic frameworks (COFs) are aromatic nitrogen-rich porous materials. COFs typically show high thermal/chemical stability, and are promising for energy applications, but often require harsh synthesis conditions and suffer from low crystallinity. In this work, we propose an environmentally friendly route for the synthesis of crystalline COFs from CO₂ molecules as a precursor. The mass ratio of CO₂ conversion into COFs formula unit reaches 46.3 %. The synthesis consists of two steps; preparation of 1,4-piperazinedicarboxaldehyde from CO₂ and piperazine, and condensation of the dicarboxaldehyde and melamine to construct the framework. The CO₂-derived COF has a 3-fold interpenetrated structure of 2D layers determined by powder X-ray diffraction, high-resolution transmission electron microscopy, and select-area electron diffraction. The structure shows a high Brunauer–Emmett–Teller surface area of 945 m² g⁻¹ and high stability against strong acid (6 M HCl), base (6 M NaOH), and boiling water over 24 hours. Post-modification of the framework with oxone has been demonstrated to modulate hydrophilicity, and it exhibits proton conductivity of 2.5×10⁻² S cm⁻¹ at 85 °C, 95 % of relative humidity.     

Optimizing Fe-Based Metal-Organic Frameworks through Ligand Conformation Regulation for Efficient Dye Adsorption and C2H2/CO2 Separation

Regulating the structure of metal-organic frameworks (MOFs) by adjusting the ligands reasonably is expected to enhance the interaction of MOFs on special molecules/ions, which has significant application value for the selective adsorption of guest molecules. Herein, two tricarboxylic ligands H₃L−Cl and H₃L−NH₂ were designed and synthesized based on the ligand H₃TTCA by replacing part of the benzene rings with C=C bonds and modifying the chlorine and amino groups on the 4-position of the benzene ring. Two 3D Fe-MOFs ( UPC-60-Cl and UPC-60-NH₂ ) with the new topology types were constructed. As the C=C bonds of the ligands have flexible torsion angles, UPC-60-Cl features three types of irregular 2D channels, while UPC-60-NH₂ has a cage with two types of windows on the surface. The synergistic effect of unique channels and modification of functional groups endows UPC-60-Cl and UPC-60-NH₂ with high adsorption capacity for organic dyes. Compound UPC-60-Cl shows high adsorption capacity for CV (147.2 mg g⁻¹), RHB (100.3 mg g⁻¹), and MO (220.9 mg g⁻¹), whereas UPC-60-NH₂ exhibits selective adsorption of MO (158.7 mg g⁻¹). Meanwhile, based on the diverse pore structure and modification of active sites, UPC-60-Cl and UPC-60-NH₂ show the selective separation of equimolar C₂H₂/CO₂. Therefore, reasonable regulation of organic ligands plays a significant role in guiding the structure diversification and performance improvement of MOFs.     

Precision Construction of 2D Heteropore Covalent Organic Frameworks by a Multiple‐Linking‐Site Strategy

Integrating different kinds of pores into one covalent organic framework (COF) endows it with hierarchical porosity and thus generates a member of a new class of COFs, namely, heteropore COFs. Whereas the construction of COFs with homoporosity has already been well developed, the fabrication of heteropore COFs still faces great challenges. Although two strategies have recently been developed to successfully construct heteropore COFs from noncyclic building blocks, they suffer from the generation of COF isomers, which decreases the predictability and controllability of construction of this type of reticular materials. In this work, this drawback was overcome by a multiple‐linking‐site strategy that offers precision construction of heteropore COFs containing two kinds of hexagonal pores with different shapes and sizes. This strategy was developed by designing a building block in which double linking sites are introduced at each branch of a C₃‐symmetric skeleton, the most widely used scaffold to construct COFs with homogeneous porosity. This design provides a general way to precisely construct heteropore COFs without formation of isomers. Furthermore, the as‐prepared heteropore COFs have hollow‐spherical morphology, which has rarely been observed for COFs, and an uncommon staggered AB stacking was observed for the layers of the 2D heteropore COFs.     

Regulating Relative Nitrogen Locations of Diazine Functionalized Covalent Organic Frameworks for Overall H2O2 Photosynthesis

Nitrogen-heterocycle-based covalent organic frameworks (COFs) are considered promising candidates for the overall photosynthesis of hydrogen peroxide (H₂O₂). However, the effects of the relative nitrogen locations remain obscured and photocatalytic performances of COFs need to be further improved. Herein, a collection of COFs functionalized by various diazines including pyridazine, pyrimidine, and pyrazine have been judiciously designed and synthesized for photogeneration of H₂O₂ without sacrificial agents. Compared with pyrimidine and pyrazine, pyridazine embedded in TpDz tends to stabilize endoperoxide intermediate species, leading toward the more efficient direct 2e^- oxygen reduction reaction (ORR) pathway. Benefiting from the effective electron-hole separation, low charge transfer resistance, and high-efficiency ORR pathway, an excellent production rate of 7327 μmol g⁻¹ h⁻¹ and a solar-to-chemical conversion (SCC) value of 0.62 % has been achieved by TpDz, which ranks one of the best COF-based photocatalysts. This work might shed fresh light on the rational design of functional COFs targeting photocatalysts in H₂O₂ production.     

Postsynthetic Functionalization of Three‐Dimensional Covalent Organic Frameworks for Selective Extraction of Lanthanide Ions

Chemical functionalization of covalent organic frameworks (COFs) is critical for tuning their properties and broadening their potential applications. However, the introduction of functional groups, especially to three‐dimensional (3D) COFs, still remains largely unexplored. Reported here is a general strategy for generating a 3D carboxy‐functionalized COF through postsynthetic modification of a hydroxy‐functionalized COF, and for the first time exploration of the 3D carboxy‐functionalized COF in the selective extraction of lanthanide ions. The obtained COF shows high crystallinity, good chemical stability, and large specific surface area. Furthermore, the carboxy‐functionalized COF displays high metal loading capacities together with excellent adsorption selectivity for Nd³⁺ over Sr²⁺ and Fe³⁺ as confirmed by the Langmuir adsorption isotherms and ideal adsorbed solution theory (IAST) calculations. This study not only provides a strategy for versatile functionalization of 3D COFs, but also opens a way to their use in environmentally related applications.     

Designing Thiophene-Enriched Fully Conjugated 3D Covalent Organic Framework as Metal-Free Oxygen Reduction Catalyst for Hydrogen Fuel Cells

The application of three-dimensional (3D) covalent organic frameworks (COFs) in renewable energy fields is greatly limited due to their non-conjugated skeletons. Here, we design and successfully synthesize a thiophene-enriched fully conjugated 3D COF (BUCT-COF-11) through an all-thiophene-linked saddle-shaped building block (COThTh-CHO). The BUCT-COF-11 exhibits excellent semiconducting property with intrinsic metal-free oxygen reduction reaction (ORR) activity. Using the COF as cathode catalyst, the assembled anion-exchange membrane fuel cells (AEMFCs) exhibited a high peak power density up to 493 mW cm⁻². DFT calculations reveal that thiophene introduction in the COF not only improves the conductivity but also optimizes the electronic structure of the sample, which therefore boosts the ORR performance. This is the first report on the application of COFs as metal-free catalysts in fuel cells, demonstrating the great potential of fully conjugated 3D COFs as promising semiconductors in energy fields.     

Stable 2D Heteroporous Covalent Organic Frameworks for Efficient Ionic Conduction

Two‐dimensional (2D) covalent organic frameworks (COFs) feature open and ordered one‐dimensional column nanochannels which offer immense possibilities for incorporation of various guests for specific functions. However, the relatively low chemical stability of most COFs originating from the dynamic covalent linkages hinders their practical application. In this work, a highly crystalline and heteroporous dibenzo[g,p]chrysene‐based COF (DBC‐2P) was synthesized and served as a host material for ionic conduction. DBC‐2P exhibits excellent stability both in strong acid and base due to the large conjugated DBC‐based knot that reinforces the interlayer interactions. Subsequent encapsulation of linear polyethylene glycol (PEG) and PEG‐LiBF₄ salt into the nanochannels of DBC‐2P affords a hybrid material with a high ionic conductivity of 2.31×10^?3 S cm^?1. This work demonstrates an efficient post‐synthetic strategy for the development of new COF–polymer composites with intriguing properties.     

具有高气态碘吸附的二维介孔共价有机框架

合成了一种新型的二维介孔共价有机框架(COF)材料JUC-573. 粉末X射线衍射、 氮气吸附-脱附和热重等表征结果表明合成的COF材料具有高结晶度、 高比表面积以及良好的热稳定性. 在333 K、 常压条件下, 该材料表现出优异的碘吸附能力, 且吸附量高达4.15 g/g. 这是由于在JUC-573中规则定向的垂直一维介孔孔道能够有效地避免碘吸附后的堵塞, 从而优化了材料的吸附能力. JUC-573可多次循环用于气态碘的捕获且保持几乎不变的吸附量.     

Construction of Tetrathiafulvalene-based Covalent Organic Frameworks for Superior Iodine Capture

The effective capture of radioiodine species during nuclear fuel reprocessing and nuclear accidents is of primary importance but remains challenging for the sustainable development of nuclear energy. Herein, we report two newly designed two-dimensional(2D) and three-dimensional(3D) covalent organic frameworks by introducing tetrathiafulvalene functional groups into the building units for the simultaneous physisorption and chemisorption capture of iodine molecules. Remarkably, the obtained 3D TTF-TAPT-COF material exhibited a superior iodine vapor adsorption capacity of up to 5.02 g/g at 348 K and under ambient pressure and an adsorption kinetics of 0.515 g/(g∙h), surpassing most of other materials reported so far. The strong physiochemical interactions between iodine molecules and the frameworks of the obtained COFs were revealed by a set of experimental techniques. This study provides a feasible approach for the rational design and the construction of novel and effective COF-based adsorbents for iodine enrichment and related environmental remediation.     

Stable Immobilization of Nickel Ions on Covalent Organic Frameworks for Panchromatic Photocatalytic Hydrogen Evolution

Post-coordination design on covalent organic frameworks (COFs) is an efficient strategy for elevating the photocatalytic activity of organic moiety. However, the rigid skeletons and densely layered stacking of two-dimensional (2D) COFs cannot be flexibly adapted for specific conformations of metal complexes, thereby impairing the metal-COF cooperation. Here, we adopt a solvothermal method to immobilize nickel(II) ions into a 2,2′-bipyridine-containing 2D COF, forming a stable coordination motif. Such the complex remarkably enhances the photocatalytic performance, giving an optimized H₂ evolution rate of as high as 51 300 μmol h⁻¹ g⁻¹, 2.5 times higher than the pristine COF. The evolved hydrogen gas can also be detected upon 700-nm light irradiation, while its analog synthesized by the traditional coordination method is photo-catalytically inert. This work provides a strategy for optimizing the metal-COF coordination system and strengthening a synergy for electronic regulation in photocatalysis.     

Three‐Dimensional Anionic Cyclodextrin‐Based Covalent Organic Frameworks

Three‐dimensional covalent organic frameworks (3D COFs) are promising crystalline materials with well‐defined structures, high porosity, and low density; however, the limited choice of building blocks and synthetic difficulties have hampered their development. Herein, we used a flexible and aliphatic macrocycle, namely γ‐cyclodextrin (γ‐CD), as the soft struts for the construction of a polymeric and periodic 3D extended network, with the units joined via tetrakis(spiroborate) tetrahedra with various counterions. The inclusion of pliable moieties in the robust open framework endows these CD‐COFs with dynamic features, leading to a prominent Li ion conductivity of up to 2.7 mS cm⁻¹ at 30 °C and excellent long‐term Li ion stripping/plating stability. Exchanging the counterions within the pores can effectively modulate the interactions between the CD‐COF and CO₂ molecules.