Reversible Postsynthetic Modification in a Metal–Organic Framework

Postsynthetic modification (PSM) of metal–organic frameworks (MOFs) provides access to functional materials and advanced porous solid engineering. Herein, we report the reversible PSM of a multivariate isoreticular MOF by applying dynamic furan-maleimide Diels–Alder (DA) chemistry. The key step involves incorporating a furan group into the MOF via “click” PSM, which can then undergo repeated cycles of modification and de-modification with maleimides. The structural integrity, crystallinity, and porosity of the furan-appended MOF remained intact even after three consecutive PSM/de-modification cycles using three different functionalized maleimides.     

Incarceration of Iodine in a Pyrene-Based Metal–Organic Framework

A pyrene-based metal-organic framework (MOF) SION-8 captured iodine (I₂) vapor with a capacity of 460 and 250 mg g⁻¹_MOF at room temperature and 75 °C, respectively. Single-crystal X-ray diffraction analysis and van-der-Waals-corrected density functional theory calculations confirmed the presence of I₂ molecules within the pores of SION-8 and their interaction with the pyrene-based ligands. The I₂–pyrene interactions in the I₂-loaded SION-8 led to a 10⁴-fold increase of its electrical conductivity compared to the bare SION-8 . Upon adsorption, ≥95 % of I₂ molecules were incarcerated and could not be washed out, signifying the potential of SION-8 towards the permanent capture of radioactive I₂ at room temperature.     

Coordination-Induced Band Gap Reduction in a Metal–Organic Framework

Herein, we report on the synthesis of a microporous, three-dimensional phosphonate metal–organic framework (MOF) with the composition Cu₃(H₅-MTPPA)₂ ⋅ 2 NMP (H₈-MTPPA=methane tetra-p-phenylphosphonic acid and NMP=N-methyl-2-pyrrolidone). This MOF, termed TUB1, has a unique one-dimensional inorganic building unit composed of square planar and distorted trigonal bipyramidal copper atoms. It possesses a (calculated) BET surface area of 766.2 m²/g after removal of the solvents from the voids. The Tauc plot for TUB1 yields indirect and direct band gaps of 2.4 eV and 2.7 eV, respectively. DFT calculations reveal the existence of two spin-dependent gaps of 2.60 eV and 0.48 eV for the alpha and beta spins, respectively, with the lowest unoccupied crystal orbital for both gaps predominantly residing on the square planar copper atoms. The projected density of states suggests that the presence of the square planar copper atoms reduces the overall band gap of TUB1, as the beta-gap for the trigonal bipyramidal copper atoms is 3.72 eV.     

Stabilizing DNAzymes through Encapsulation in a Metal–Organic Framework

DNAzymes are a promising class of bioinspired catalyst; however, their structural instability limits their potential. Herein, a method to stabilize DNAzymes by encapsulating them in a metal–organic framework (MOF) host is reported. This biomimetic mineralization process makes DNAzymes active under a wider range of conditions. The concept is demonstrated by encapsulating hemin-G-quadruplex (Hemin-G4) into zeolitic imidazolate framework-90 (ZIF-90), which indeed increases the DNAzyme's structural stability. The stabilized DNAzymes show activities in the presence of Exonuclease I, organic solvents, or high temperature. Owing to its elevated stability and heterogeneous nature, it is possible to perform catalysis under continuous-flow conditions, and the DNAzyme can be reactivated in situ by introducing K⁺. Moreover, it is found that the encapsulated DNAzyme maintains its high enantiomer selectivity, demonstrated by the sulfoxidation of thioanisole to (S)-methyl phenyl sulfoxide. This concept of stabilizing DNAzymes expands their potential application in chemical industry.     

Evidence of a Uranium-Paddlewheel Node in a Catecholate-Based Metal–Organic Framework

The interactions between uranium and non-innocent organic species are an essential component of fundamental uranium redox chemistry. However, they have seldom been explored in the context of multidimensional, porous materials. Uranium-based metal–organic frameworks (MOFs) offer a new angle to study these interactions, as these self-assembled species stabilize uranium species through immobilization by organic linkers within a crystalline framework, while potentially providing a method for adjusting metal oxidation state through coordination of non-innocent linkers. We report the synthesis of the MOF NU-1700 , assembled from U⁴⁺-paddlewheel nodes and catecholate-based linkers. We propose this highly unusual structure, which contains two U⁴⁺ ions in a paddlewheel built from four linkers—a first among uranium materials—as a result of extensive characterization via powder X-ray diffraction (PXRD), sorption, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA), in addition to density functional theory (DFT) calculations.     

A Chemiluminescent Metal–Organic Framework

The synthesis and characterization of a chemiluminescent metal–organic framework with high porosity is reported. It consists of Zr₆O₆(OH)₄ nodes connected by 4,4′-(anthracene-9,10-diyl)dibenzoate as the linker and luminophore. It shows the topology known for UiO-66 and is therefore denoted PAP-UiO. The MOF was not only obtained as bulk material but also as a thin film. Exposure of PAP-UiO as bulk or film to a mixture of bis-(2,4,6-trichlorophenyl) oxalate, hydrogen peroxide, and sodium salicylate in a mixture of dimethyl and dibutyl phthalate evoked strong and long lasting chemiluminescence of the PAP-UiO crystals. Time dependent fluorescence spectroscopy on bulk PAP-UiO and, for comparison, on dimethyl 4,4′-(anthracene-9,10-diyl)dibenzoate provided evidence that the chemiluminescence originates from luminophores being part of the PAP-UiO, including the luminophores inside the crystals.     

Solid State Machinery of Multiple Dynamic Elements in a Metal–Organic Framework

Engineering coordinated rotational motion in porous architectures enables the fabrication of molecular machines in solids. A flexible two-fold interpenetrated pillared Metal-Organic Framework precisely organizes fast mobile elements such as bicyclopentane (BCP) (10⁷ Hz regime at 85 K), two distinct pyridyl rotors and E-azo group involved in pedal-like motion. Reciprocal sliding of the two sub-networks, switched by chemical stimuli, modulated the sizes of the channels and finally the overall dynamical machinery. Actually, iodine-vapor adsorption drives a dramatic structural rearrangement, displacing the two distinct subnets in a concerted piston-like motion. Unconventionally, BCP mobility increases, exploring ultra-fast dynamics (10⁷ Hz) at temperatures as low as 44 K, while the pyridyl rotors diverge into a faster and slower dynamical regime by symmetry lowering. Indeed, one pillar ring gained greater rotary freedom as carried by the azo-group in a crank-like motion. A peculiar behavior was stimulated by pressurized CO_2, which regulates BCP dynamics upon incremental site occupation. The rotary dynamics is intrinsically coupled to the framework flexibility as demonstrated by complementary experimental evidence (multinuclear solid-state NMR down to very low temperatures, synchrotron radiation XRD, gas sorption) and computational modelling, which helps elucidate the highly sophisticated rotor-structure interplay.     

Amorphization of Metal–Organic Framework MOF-5 by Electrical Discharge

Amorphization of various solid materials has attracted increasing attentions. We report here an amorphization of metal–organic framework-5 (MOF-5) of composition Zn₄O(BDC)₃ (BDC = 1,4-benzenedicarboxylate) using dielectric-barrier discharge (DBD) treatment at ambient pressure and low gas temperature (around 120°C). The irreversible amorphization was confirmed by x-ray diffraction (XRD) characterization. The result of N₂ adsorption–desorption measurements revealed a collapse of pores, which further supported the XRD results. The destroying of part of carboxylate groups might be the main reason resulting in the amorphization of MOF-5.     

Emergence of a Radical-Stabilizing Metal–Organic Framework as a Radio-photoluminescence Dosimeter

Radio-photoluminescence (RPL) materials display a distinct radiation-induced permanent luminescence center, and therefore find application in the detection of ionizing radiation. The current inventory of RPL materials, which were discovered by serendipity, has been limited to a small number of metal-ion-doped inorganic materials. Here we document the RPL of a metal–organic framework (MOF) for the first time: X-ray induced free radicals are accumulated on the organic linker and are subsequently stabilized in the conjugated fragment in the structure, while the metal center acts as the X-ray attenuator. These radicals afford new emission features in both UV-excited and X-ray excited luminescence spectra, making it possible to establish linear relationships between the radiation dose and the normalized intensity of the new emission feature. The MOF-based RPL materials exhibit advantages in terms of the dose detection range, reusability, emission stability, and energy threshold. Based on a comprehensive electronic structure and energy diagram study, the rational design and a substantial expansion of candidate RPL materials can be anticipated.     

High Ammonia Uptake of a Metal–Organic Framework Adsorbent in a Wide Pressure Range

Although numerous porous adsorbents have been investigated for NH₃ capture applications, these materials often exhibit insufficient NH₃ uptake, low NH₃ affinity at the ppm level, and poor chemical stability against wet NH₃ conditions. The NH₃ capture properties of M₂(dobpdc) complexes (M=Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, and Zn²⁺; dobpdc⁴⁻=4,4-dioxidobiphenyl-3,3-dicarboxylate) that contain open metal sites is presented. The NH₃ uptake of Mg₂(dobpdc) at 298 K was 23.9 mmol g⁻¹ at 1 bar and 8.25 mmol g⁻¹ at 570 ppm, which are record high capacities at both pressures among existing porous adsorbents. The structural stability of Mg₂(dobpdc) upon exposure to wet NH₃ was superior to that of the other M₂(dobpdc) and the frameworks tested. Overall, these results demonstrate that Mg₂(dobpdc) is a recyclable compound that exhibits significant NH₃ affinity and capacity, making it a promising candidate for real-world NH₃-capture applications.     

Solvent-Driven Reversible Phase Transition of a Pillared Metal–Organic Framework

Over the last decade, the controllable reversible phase transition of functional materials has received growing interest as it shows unique suitability for various technological applications. Although many metal–organic frameworks (MOFs) possess a lamellar structure, the reversible structural transformation of MOFs between their three-dimensional (3D) phase and two-dimensional (2D) phase remains a largely unexplored area. Herein, we report for the first time a europium MOF with unprecedented reversible morphology in different solvents at room temperature. This europium MOF displayed a 3D nanorod morphology in organic solvent and a 2D nanobelt architecture in water. As a proof of concept for potential applications of this reversible-phase-transition MOF, we were able to use a delamination recovery method to load dye molecules that previously could not be loaded into europium MOFs.     

A Spiderweb-Like Metal–Organic Framework Multifunctional Foam

Processing metal–organic frameworks (MOFs) into hierarchical macroscopic materials can greatly extend their practical applications. However, current strategies suffer from severe aggregation of MOFs and limited tuning of the hierarchical porous network. Now, a strategy is presented that can simultaneously tune the MOF loading, composition, spatial distribution, and confinement within various bio-originated macroscopic supports, as well as control the accessibility, robustness, and formability of the support itself. This method enables the good dispersion of individual MOF nanoparticles on a spiderweb-like network within each macrovoid even at high loadings (up to 86 wt %), ensuring the foam pores are highly accessible for excellent adsorption and catalytic capacity. Additionally, this approach allows the direct pre-incorporation of other functional components into the framework. This strategy provides precise control over the properties of both the hierarchical support and MOF.     

Solvent-Vapor-Induced Reversible Single-Crystal-to-Single-Crystal Transformation of a Triphosphaazatriangulene-Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha-Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π-conjugated framework, which enables the stimuli-responsive reversible transformation of [Cu(HL)(DMSO)⋅(MeOH)]_n, a 3D-MOF that exhibits reversible sorption characteristics, into (H₃L⋅0.5 [Cu₂(OH)₄⋅6 H₂O] ⋅4 H₂O), a 1D-columnar assembled proton-conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10⁻³ S cm⁻¹ at 95 % relative humidity and 60 °C.     

Magnetic Phase Transitions in a Ni4O4-Cubane-Based Metal–Organic Framework

An unprecedented spin cluster-based network architecture {[Ni^II₂(pdaa)(OH)₂(H₂O)]_n (H₂pdaa=1,4-phenylene diacetic acid)}, comprising 1D linear chains of Ni^II ions crosslinked via Ni₄O₄ cubanes, forms under hydrothermal conditions; this 3D coordination network exhibits magnetic ordering at 23.9 K as well as a second magnetic ordering process at 2.8 K likely associated with a structural phase transition.     

Tuning Electrical- and Photo-Conductivity by Cation Exchange within a Redox-Active Tetrathiafulvalene-Based Metal–Organic Framework

To activate electronic and optical functions of the redox-active metal–organic framework, (Me₂NH₂)[In^III(TTFTB)]⋅0.7 C₂H₅OH⋅DMF (Me₂NH₂@ 1 , TTFTB=tetrathiafulvalene-tetrabenzoate, DMF=N,N-dimethylformamide), has been exchanged by tetrathiafulvalenium (TTF^.+) and N,N′-dimethyl-4,4′-bipyridinium (MV²⁺). These cations provide electron carriers and photosensitivity. The exchange retains the crystallinity allowing single-crystal to single-crystal post-synthetic transformation to TTF@ 1 and MV@ 1 . Both TTF^.+ and MV²⁺ enhance the electrical conductivity by a factor of 10² and the visible light induced photocurrent by 4 and 28 times, respectively. EPR evidences synergetic effect involving charge transfer between the framework redox-active TTFTB bridges and MV²⁺. The results demonstrate that functionalization of MOF by cation exchange without perturbing the crystallinity extends possibilities to achieve switchable materials.     

Thermal Elimination of Ethylene from Cyclobutyl Groups Characterized by X-ray Crystallography in a Metal–Organic Framework Matrix

Methods to synthesize and characterize aromatic molecules with vinyl substituents are sought after yet limited in the literature. Here, we introduce cyclobutyl groups into a metal–organic framework (MOF) matrix that are poised to produce ethylene upon heating. The expulsion of ethylene produces vinyl groups on an aromatic core, which are isolated by the crystalline matrix of the framework. This enables full characterization of the thermolysis by single-crystal X-ray diffraction. Further, we modify the vinyl groups by a bromine addition reaction. Importantly, the two transformations happen in a single-crystal-to-single-crystal manner without changing the overall network structure of the parent framework. New insights into the structural and synthetic chemistry of this important class of compound are generated. Installing reactive vinyl tags in materials by the high temperature thermolysis of cyclobutyl groups is a powerful strategy for altering their physicochemical characteristics.     

Porphyrinylphosphonate-Based Metal–Organic Framework: Tuning Proton Conductivity by Ligand Design

A novel metal–organic framework [Zn₃(Ni-H₂TPPP)(Ni-H₄TPPP)(Ni-H₅TPPP) ⋅ 7(CH₃)₂NH₂ ⋅ DMF ⋅ 7 H₂O] (where Ni-H_xTPPP (x=2,4,5) are partially deprotonated [5,10,15,20-tetrakis(3-(phosphonatophenyl)-porphyrinato(2-))]nickel(II) species), IPCE-2Ni , with outstanding proton conductivity (1.0×10⁻² S cm⁻¹ at 75 °C and 95 % relative humidity) has been obtained. The high concentration of free phosphonate groups and compensating dimethylammonium cations bound by hydrogen bonds in the unique crystal structure of IPCE-2Ni is a key factor responsible for the observed high proton conductivity, which is one order of magnitude higher than for the corresponding MOF based on 5,10,15,20-tetrakis(4-(phosphonatophenyl)porphyrinato(2-))]nickel(II) IPCE-1Ni and comparable with that of leaders among MOFs.     

Effective C4 Separation by Zeolite Metal–Organic Framework Composite Membranes

Inorganic zeolites have excellent molecular sieving properties, but they are difficult to process into macroscopic structures. In this work, we use metal–organic framework (MOF) glass as substrates to engineer the interface with inorganic zeolites, and then assemble the discrete crystalline zeolite powders into monolithic structures. The zeolites are well dispersed and stabilized within the MOF glass matrix, and the monolith has satisfactory mechanical stabilities for membrane applications. We demonstrate the effective separation performance of the membrane for 1,3-butadiene (C₄H₆) from other C₄ hydrocarbons, which is a crucial and challenging separation in the chemical industry. The membrane achieves a high permeance of C₄H₆ (693.00±21.83 GPU) and a high selectivity over n-butene, n-butane, isobutene, and isobutane (9.72, 9.94, 10.31, and 11.94, respectively). This strategy opens up new possibilities for developing advanced membrane materials for difficult hydrocarbon separations.     

Photocatalytic Dehalogenative Deuteration of Halides over a Robust Metal–Organic Framework

Deuterium labelling of organic compounds is an important process in chemistry. We report the first example of photocatalytic dehalogenative deuteration of both arylhalides and alkylhalides (40 substrates) over a metal–organic framework, MFM-300(Cr), using CD₃CN as the deuterium source at room temperature. MFM-300(Cr) catalyses high deuterium incorporation and shows excellent tolerance to various functional groups. Synchrotron X-ray powder diffraction reveals the activation of halogenated substrates via confined binding within MFM-300(Cr). In situ electron paramagnetic resonance spectroscopy confirms the formation of carbon-based radicals as intermediates and reveals the reaction pathway. This protocol removes the use of precious-metal catalysts from state-of-the-art processes based upon direct hydrogen isotope exchange and shows high photocatalytic stability, thus enabling multiple catalytic cycles.