High‐Performance Perovskite Light‐Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation

Defect passivation has been demonstrated to be effective in improving the radiative recombination of charge carriers in perovskites, and consequently, the device performance of the resultant perovskite light‐emitting diodes (LEDs). State‐of‐the‐art useful passivation agents in perovskite LEDs are mostly organic chelating molecules that, however, simultaneously sacrifice the charge‐transport properties and thermal stability of the resultant perovskite emissive layers, thereby deteriorating performance, and especially the operational stability of the devices. We demonstrate that lithium halides can efficiently passivate the defects generated by halide vacancies and reduce trap state density, thereby suppressing ion migration in perovskite films. Efficient green perovskite LEDs based on all‐inorganic CsPbBr₃ perovskite with a peak external quantum efficiency of 16.2 %, as well as a high maximum brightness of 50 270 cd m^?2, are achieved. Moreover, the device shows decent stability even under a brightness of 10⁴ cd m^?2. We highlight the universal applicability of defect passivation using lithium halides, which enabled us to improve the efficiency of blue and red perovskite LEDs.     

Water-Driven Synthesis of Deep-Blue Perovskite Colloidal Quantum Wells for Electroluminescent Devices

Perovskite colloidal quantum wells (QWs) are promising to realize narrow deep-blue emission, but the poor optical performance and stability suppress their practical application. Here, we creatively propose a water-driven synthesis strategy to obtain size-homogenized and strongly confined deep-blue CsPbBr₃ QWs, corresponding to three monolayers, which emit at the deep-blue wavelength of 456 nm. The water controls the orientation and distribution of the ligands on the surface of the nanocrystals, thus inducing orientated growth through the Ostwald ripening process by phagocytizing unstable nanocrystals to form well-crystallized QWs. These QWs present remarkable stability and high photoluminescence quantum yield of 94 %. Furthermore, we have prepared light-emitting diodes based on the QWs via the all-solution fabrication strategy, achieving an external quantum efficiency of 1 % and luminance of 2946 cd m⁻², demonstrating state-of-the-art brightness for perovskite QW-based LEDs.     

High‐Performance CsPb1−xSnxBr3 Perovskite Quantum Dots for Light‐Emitting Diodes

All inorganic CsPbBr₃ perovskite quantum dots (QDs) are potential emitters for electroluminescent displays. We have developed a facile hot‐injection method to partially replace the toxic Pb²⁺ with highly stable Sn⁴⁺. Meanwhile, the absolute photoluminescence quantum yield of CsPb_1−x Sn_x Br₃ increased from 45 % to 83 % with Sn^IV substitution. The transient absorption (TA) exciton dynamics in undoped CsPbBr₃ and CsPb_0.67Sn_0.33Br₃ QDs at various excitation fluences were determined by femtosecond transient absorption, time‐resolved photoluminescence, and single‐dot spectroscopy, providing clear evidence for the suppression of trion generation by Sn doping. These highly luminescent CsPb_0.67Sn_0.33Br₃ QDs emit at 517 nm. A device based on these QDs exhibited a luminance of 12 500 cd m⁻², a current efficiency of 11.63 cd A⁻¹, an external quantum efficiency of 4.13 %, a power efficiency of 6.76 lm w⁻¹, and a low turn‐on voltage of 3.6 V, which are the best values among reported tin‐based perovskite quantum‐dot LEDs.     

Triphenylamine-Derived Solid-State Emissive Carbon Dots for Multicolor High-Efficiency Electroluminescent Light-Emitting Diodes

Two kinds of triphenylamine-derived solid-state emissive carbon dots (CDs) with orange and yellow color are facilely synthesized through solvothermal treatment, taking advantage of the nonplanar structure and good carrier mobility of triphenylamine unit. Theoretical calculations show that the triphenylamine structure could greatly inhibit the direct π–π stacking of aromatic skeletons and enhance the fluorescence properties of CDs in aggregation state. By adopting the CDs as single emissive layer, high-performance orange-color and green-color electroluminescent light-emitting diodes (LEDs) are successfully fabricated, with maximum brightness of 9450/4236 cd m⁻², high current efficiency of 1.57/2.34 cd A⁻¹ and low turn-on voltage of 3.1/3.6 eV are respectively achieved. Significantly, white-color LED device is further prepared. This work provides a universal platform for the construction of novel solid-state emissive CDs with significant applications in photoelectric device.     

Imidazo[1,2-a]pyridine as an Electron Acceptor to Construct High-Performance Deep-Blue Organic Light-Emitting Diodes with Negligible Efficiency Roll-Off

Two novel bipolar deep-blue fluorescent emitters, IP-PPI and IP-DPPI, featuring different lengths of the phenyl bridge, were designed and synthesized, in which imidazo[1,2-a]pyridine (IP) and phenanthroimidazole (PI) were proposed as an electron acceptor and an electron donor, respectively. Both of them exhibit outstanding thermal stability and high emission quantum yields. All the devices based on these two materials showed negligible efficiency roll-off with increasing current density. Impressively, non-doped organic light-emitting diodes (OLEDs) based on IP-PPI and IP-DPPI exhibited external quantum efficiencies (EQEs) of 4.85 % and 4.74 % with CIE coordinates of (0.153, 0.097) and (0.154, 0.114) at 10000 cd m⁻², respectively. In addition, the 40 wt % IP-PPI doped device maintained a high EQE of 5.23 % with CIE coordinates of (0.154, 0.077) at 10000 cd m⁻². The doped device based on 20 wt % IP-DPPI exhibited a higher deep-blue electroluminescence (EL) performance with a maximum EQE of up to 6.13 % at CIE of (0.153, 0.078) and maintained an EQE of 5.07 % at 10000 cd m⁻². To the best of our knowledge, these performances are among the state-of-the art devices with CIE_y≤0.08 at a high brightness of 10000 cd m⁻². Furthermore, by doping a red phosphorescent dye Ir(MDQ)₂ (MDQ=2-methyldibenzo[f,h]quinoxaline) into the IP-PPI and IP-DPPI hosts, high-performance red phosphorescent OLEDs with EQEs of 20.8 % and 19.1 % were achieved, respectively. This work may provide a new approach for designing highly efficient deep-blue emitters with negligible roll-off for OLED applications.     

Acridone-Based Host Materials for Green Phosphorescent and Thermally Activated Delayed Fluorescent OLEDs with Low-Efficiency Roll-Offs

By linking the carbazole unit to the nitrogen atom of acridone through phenyl or pyridyl, two compounds, named 10-(4-(9H-carbazol-9-yl)phenyl)acridin-9(10H)-one (AC-Ph-Cz) and 10-(5-(9H-carbazol-9-yl)pyridin-2-yl)acridin-9(10H)-one (AC-Py-Cz) were designed and synthesized. These two materials, characterized with highly twisted and rigid structure, good thermal stability, and balanced carrier-transporting properties, were employed as host materials for green phosphorescent and thermally activated delayed fluorescent organic light-emitting diodes (OLEDs). The carbazole group, despite its small contribution to the highest occupied molecular orbitals (HOMOs) of these two materials, plays an essential role as an intramolecular host in energy delivering and improving the hole transporting ability of these two hosts. The incorporation of the electron-deficient pyridyl group as a linking group slightly improves the electron transporting capability of AC-Py-Cz. The green phosphorescent OLED (PhOLED) based on AC-Py-Cz exhibited excellent device performance with a turn-on voltage of 2.5 V, a maximum power efficiency and an external quantum efficiency (η_ext) of 89.8 lm W⁻¹ and 25.2 %, respectively, benefitting from the better charge-balancing ability of AC-Py-Cz host due to the presence of the pyridyl bridge. More importantly, all the devices based on these two hosts showed low efficiency roll-off at high brightness due to the suppressed non-radiative transition in the emitting layer. In particular, the AC-Py-Cz-hosted green PhOLED exhibited an efficiency roll-off of 1.6 % from the maximum next at a high brightness of 1000 cd m⁻² and a roll-off of 15.9 % at an extremely high brightness of 10000 cd m⁻². This study manifests that acridone-based host materials have great potential in fabricating OLEDs with low efficiency roll-off.     

Antioxidant induced bulk passivation for efficient and stable hole transport layer-free carbon electrode perovskite solar cells

Defect passivation is one of the important strategies to improve the efficiency and stability of perovskite solar cells. In this work, 2,6-di‑tert‑butyl‑4-methylphenol (BHT) as antioxidant was introduced into the perovskite precursor solution to improve the quality of the prepared perovskite films, so that these films performed a larger and uniform grain size. Moreover, the −OH functional group in BHT interacts with I⁻, thus reducing the density of defect states and inhibiting the non-radiative recombination. The presence of hydrophobic groups in BHT protects the film from moisture erosion and improves the long-term stability of PSCs devices. The maximum photoelectric conversion efficiency of the constructed ITO/SnO₂/BHT-MAPbI₃/Carbon device is 16.88%, and the unpackaged cell maintains the initial efficiency of 99.3% after 698 h of storage under the environmental condition of 30% humidity. This work provides an efficient approach to improve the performance of printable hole transport layer-free carbon electrode perovskite solar cells.     

Polyfluorene presenting dipolar pendent groups and its application to electroluminescent devices

We have synthesized a blue-light-emitting polyfluorene derivative (PF-TPAOXD) that presents sterically hindered, dipolar pendent groups functionalized at the C-9 positions of alternating fluorene units. The incorporation of the dipolar side chains, each comprising an electron-rich triphenylamine group and an electron-deficient oxadiazole group connected through a π-conjugated bridge, endows the resultant polymer with higher highest occupied molecular orbital and lower lowest unoccupied molecular orbital energy levels, which, consequently, lead to an increase in both hole and electron affinities. An electroluminescent device incorporating this polymer as the emitting layer exhibited a stable blue emission with a maximum brightness of 2080 cd/m² at 12 V and a maximum external quantum efficiency of 1.4% at a brightness of 137 cd/m². Furthermore, atomic force microscopy measurements indicated that the dipolar nature of PF-TPAOXD, in contrast to the general nonpolarity of polydialkylfluorenes, provided a stabilizing environment allowing the polar organometallic triplet dopant to be dispersed homogeneously. We also fabricated an electrophosphorescent device incorporating PF-TPAOXD as the host material doped with a red-emitting osmium complex to realize red electroluminescence with Commission Internationale de l'Eclairage color coordinates of (0.66, 0.34). The resulting device exhibited a maximum external quantum efficiency of 7.3% at a brightness of 1747 cd/m² and a maximum brightness of 7244 cd/m². © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2073–2084, 2007     

Bipolar Heteroleptic Green Iridium Dendrimers Containing Oligocarbazole and Oxadiazole Dendrons for Bright and Efficient Nondoped Electrophosphorescent Devices

Bipolar heteroleptic green light‐emitting iridium (Ir) dendrimers G(OXD) and G(DOXD) have been designed and synthesized under mild conditions in high yields, in which the first C^N and second O^O ligands are functionalized with oligocarbazole‐ and oxadiazole‐based dendrons, respectively. To avoid affecting the optical properties of the emissive iridium core, all the functional moieties are attached to the ligands through a flexible spacer. Compared with the unipolar dendrimer G(acac ), dendrimers G(OXD) and G(DOXD) exhibit the close emission maxima of 511–512 nm and photoluminescence quantum yield of 0.39–0.40 in a solution of toluene. Moreover, on going from G(acac) to G(OXD) and G(DOXD) , we have found that the introduction of oxadiazole fragments decreases the lowest unoccupied molecular orbital (LUMO) energy levels to facilitate the electron injection and electron transporting, while their highest occupied molecular orbital (HOMO) energy levels remain unchanged. This means that, we can individually tune the HOMO and LUMO energy levels based on the heteroleptic structure to ensure the relative independence between the hole and electron in the emitting layer (EML), which is a favorable feature for bipolar optoelectronic materials. As a result, a bilayer nondoped electrophosphorescent device with G(DOXD) as the EML gives a maximum luminous efficiency of 25.5 cd A⁻¹ (η_ext: 7.4 %) and a brightness of 33 880 cd m⁻². In comparison to G(acac) (17.2 cd A⁻¹, 17 680 cd m⁻²), both the efficiency and brightness are improved by about 1.5 and 2 times, respectively. These state‐of‐the‐art performances indicate the potential of these bipolar heteroleptic iridium dendrimers as solution‐processible emitting materials for nondoped device applications.     

Synthesis of thermal‐stable and photo‐crosslinkable polyfluorenes for the applications of polymer light‐emitting diodes

Three polyfluorene derivatives which have oxetane‐containing phenyl group at C‐9 position were synthesized via the palladium‐catalyzed Suzuki‐coupling reaction. The synthesized polymers PFB, PFG, and PFR emit blue, green, and red light, respectively. A double‐layer device with the configuration of ITO/PEDOT/polymer/Ca/Al using PFB as the active layer showed a threshold voltage of 5 V, a maximum brightness of 2030 cd/m², and a maximum current efficiency of 0.35 cd/A. Using PFG as the active layer, the device exhibited a threshold voltage of 6 V, a maximum brightness of 6447 cd/m², and a maximum current efficiency of 1.27 cd/A. Using PFR as the active layer, the device showed a threshold voltage of 4 V, a maximum brightness of 2135 cd/m², and a maximum current efficiency of 0.16 cd/A. Better electroluminescent performance was also found based on different design of device structures. Due to photo‐crosslinking property of oxetane groups, the UV‐exposed thin films are insoluble in common organic solvents. A device comprised of blue, green, and red‐emissive pixels was successfully fabricated by spin‐coating and photo‐lithographic processes. In addition, a white light‐emitting device with CIE coordinate of (0.34, 0.33) was achieved by blending PFR into a host material PFB as the active layer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 516–524, 2010     

Configurationally Stable Platinahelicene Enantiomers for Efficient Circularly Polarized Phosphorescent Organic Light-Emitting Diodes

Chiral materials with circularly polarized luminescence (CPL) are potentially applicable for 3D displays. In this study, by decorating the pyridinyl-helicene ligands with -CF₃ and -F groups, the platinahelicene enantiomers featured superior configurational stability, as well as high sublimation yield (>90 %) and clear CPPL properties, with dissymmetry factors (|g_PL|) of approximately 3.7×10⁻³ in solution and about 4.1×10⁻³ in doped film. The evaporated circularly polarized phosphorescent organic light-emitting diodes (CP-PhOLEDs) with two enantiomers as emitters exhibited symmetric CPEL signals with |g_EL| of (1.1–1.6)×10⁻³ and decent device performances, achieving a maximum brightness of 11 590 cd m⁻², a maximum external quantum efficiency up to 18.81 %, which are the highest values among the reported devices based on chiral phosphorescent Pt^II complexes. To suppress the effect of reverse CPEL signal from the cathode reflection, the further implementation of semitransparent aluminum/silver cathode successfully boosts up the |g_EL| by over three times to 5.1×10⁻³.     

Novel Conjugated Side Chain Fluorinated Polymers Based on Fluorene for Light-Emitting and Ternary Flash Memory Devices

Three novel conjugated polymers based on 9,9′-dioctylfluorene unit and isoindolo[2,1-a]benzimidazol-11-one with different fluorine substituents (0, 2 and 4) were synthesized. PLED and resistive memory devices based on these polymers were prepared consequently. PLED based on four-fluorinated polymer showed the highest maximum brightness of 3192 cd m⁻² with almost 5-fold increase of current efficiency 8-fold increase of external quantum efficiency compared to that of the other two, and all the PLEDs exhibited good emission stability with no noticeable change of electroluminescence even under high voltage of 10 V. The memory device of doubly-fluorinated polymer exhibited ternary flash behavior with threshold voltages below −2.5 V, while device of four-fluorinated polymer possessed ON/OFF current ratio above 10⁴. Impact of fluorine substitutions on the performance of devices were briefly investigated. The results revealed that the improvement of device performance might not scale with the increasing number of fluorine substitutions, and the four-fluorine-substituted polymer and doubly-fluorinated polymer could be encouraging materials for applications of PLED and resistive memory device and worth of further design of other new polymer systems.     

Alignment of Heptagonal Diimide and Triazine Enables Narrowband Pure-Blue Organic Light-Emitting Diodes with Low Efficiency Roll-Off

The endeavor to develop high-performance narrowband blue organic light-emitting diodes (OLEDs) with low efficiency roll-off represents an attractive challenge. Herein, we introduce a hetero-acceptor design strategy centered around the heptagonal diimide (BPI) building block to create an efficient thermally activated delayed fluorescence (TADF) sensitizer. The alignment of a twisted BPI unit and a planar diphenyltriazine (TRZ) fragment imparts remarkable exciton dynamic properties to 26tCz-TRZBPI, including a fast radiative decay rate (k_R) of 1.0×10⁷ s⁻¹ and a swift reverse intersystem crossing rate (k_RISC) of 1.8×10⁶ s⁻¹, complemented by a slow non-radiative decay rate (k_NR) of 6.0×10³ s⁻¹. Consequently, 26tCz-TRZBPI facilitates the fabrication of high-performance narrowband pure-blue TADF-sensitized fluorescence OLEDs (TSF-OLEDs) with a maximum external quantum efficiency (EQE_max) of 24.3 % and low efficiency roll-off even at a high brightness level of 10000 cd m⁻² (EQE₁₀₀₀₀: 16.8 %). This showcases a record-breaking external quantum efficiency at a high luminance level of 10000 cd m⁻² for narrowband blue TSF-OLEDs.     

Non-Doped Blue AIEgen-Based OLED with EQE Approaching 10.3 %

Aggregation-induced emission (AIE) luminogens (AIEgens) are attractive for the construction of non-doped blue organic light-emitting diodes (OLEDs) owning to their high emission efficiency in the film state. However, the large internal inversion rate (k_IC^(Tn)) between high-lying triplet levels (T_n) and T_n-1 causes a huge loss of triplet excitons, resulting in dissatisfied device performance of these AIEgens-based non-doped OLEDs. Herein, we designed and synthesized a blue luminogen of DPDPB-AC by fusing an AIEgen of TPB-AC and a DMPPP, which feature hot exciton and triplet-triplet annihilation (TTA) up-conversion process, respectively. DPDPB-AC successfully inherits the AIE feature and excellent horizontal dipole orientation of TPB-AC. Furthermore, it owes smaller k_IC^(Tn) than TPB-AC. When DPDPB-AC was applied in OLED as non-doped emitting layer, an outstanding external quantum efficiency of 10.3 % and an exceptional brightness of 69311 cd m⁻² were achieved. The transient electroluminescent measurements and steady-state dynamic analysis confirm that both TTA and hot exciton processes contribute to such excellent device performance. This work provides a new insight into the design of efficient organic fluorophores by managing high-lying triplet excitons.     

Synthesis and electro‐optical properties of light‐emitting polymers containing oxadiazole derivatives for light‐emitting diodes applications

Two PPV‐based bipolar polymers containing 1,3,4‐oxadiazole pendant groups were synthesized via the Gilch polymerization reaction for use in light‐emitting diodes (LEDs). The resulting polymers were characterized using ¹H and ¹³C NMR, elemental analysis, DSC, and TGA. These polymers were found to be soluble in common organic solvents and are easily spin‐coated onto glass substrates, producing high optical quality thin films without defects. The electro‐optical properties of ITO/PEDOT/polymer/Al devices based on these polymers were investigated using UV‐visible, PL, and EL spectroscopy. The turn‐on voltages of the OC₁Oxa‐PPV and OC₁₀Oxa‐PPV devices were found to be 8.0 V. The maximum brightness and luminescence efficiency of the OC₁Oxa‐PPV device were found to be 544 cd/m² at 19 V and 0.15 cd/A, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1098–1110, 2008     

A Multifunctional Polymer as an Interfacial Layer for Efficient and Stable Perovskite Solar Cells

Metal-cation defects and halogen-anion defects in perovskite films are critical to the efficiency and stability of perovskite solar cells (PSCs). In this work, a random polymer, poly(methyl methacrylate-co-acrylamide) (PMMA-AM), was synthesized to serve as an interfacial passivation layer for synergistically passivating the under-coordinated Pb²⁺ and anchor the I^- of the [PbI₆]⁴⁻ octahedron. Additionally, the interfacial PMMA-AM passivation layer cannot be destroyed during the hole transport layer deposition because of its low solubility in chlorobenzene. This passivation leads to an enhancement in the open-circuit voltage from 1.12 to 1.22 V and improved stability in solar cell devices, with the device maintaining 95 % of the initial power conversion efficiency (PCE) over 1000 h of maximum power point tracking. Additionally, a large-area solar cell module was fabricated using this approach, achieving a PCE of 20.64 %.     

A Novel Spiro[acridine‐9,9′‐fluorene] Derivatives Containing Phenanthroimidazole Moiety for Deep‐Blue OLED Application

Typical π–π stacking and aggregation‐caused quenching could be suppressed in the film‐state by the spiro conformation molecular design in the field of organic light‐emitting diodes (OLEDs). Herein, a novel deep‐blue fluorescent material with spiro conformation, 1‐(4‐(tert ‐butyl)phenyl)‐2‐(4‐(10‐phenyl‐10H ‐spiro[acridine‐9,9′‐fluoren]‐2‐yl)phenyl)‐1H ‐phenanthro[9,10‐d ]imidazole ( SAF‐BPI ), was designed and synthesized. The compound consists of spiro‐acridine‐fluorene (SAF) as donor part and phenanthroimidazole (BPI) as acceptor part. Owing to the rigid SAF skeleton, this compound exhibits a high thermal stability with a glass transition temperature (T _g) of 198 °C. The compound exhibits bipolar transporting characteristics demonstrated by the single‐carrier devices. The non‐doped OLEDs based on the SAF‐BPI as the emitting layer shows maximum emission at 448 nm, maximum luminance of 2122 cd m⁻², maximum current efficiency (CE) of 3.97 cd A⁻¹, and a maximum power efficiency of 2.08 lm W⁻¹. The chromaticity coordinate is stable at (0.15, 0.10) at the voltage of 7–11 V. The device shows a slow efficiency roll‐off with CE of 3.35 and 2.85 cd A⁻¹ at 100 and 1000 cd m⁻², respectively.     

A yellow-emitting iridium complex for use in phosphorescent multiple-emissive-layer white organic light-emitting diodes with high color quality and efficiency

A cyclometalated iridium(III) complex containing 2-(9,9-diethylfluoren-2-yl)pyridine [Ir(Flpy)₃] was prepared and used in the fabrication of both yellow and white organic light-emitting diodes (OLEDs). A hole-blocking material has been used as a hole barrier layer in-between different emission layers, helping the formation of the hole limitation region. With the proper position of a hole barrier layer and the construction of a four-emission-layer structure involving the use of [Ir(Flpy)₃], the resulting WOLED shows sound device performance as well as very stable color even at high luminances. Such WOLEDs have been demonstrated to reveal superior white light color stability/efficiency trade-off optimization. The Commission Internationale de L’Eclairage (CIE) coordinate differences Δx and Δy are confined to ±0.015 when the luminance increases from 13 to 14806 cd/m². The color rendering index (CRI) of the device is also very good, which varies only from 86 to 87 by changing from the normal direction to 80° off-normal at 12 V. The peak electrophosphorescence efficiency can reach as high as 24.6 cd/A at 168 cd/m²and it can still be kept at 17.2 cd/A at 10834 cd/m². Such outstanding performance renders this all-phosphor WOLED very attractive as a white light source for illumination applications, which typically demand high efficiency, high CRI, and stable color in high brightness work conditions.     

High-efficiency,solution-processable,multilayer triple cation perovskite light-emitting diodes with copper sulfide–gallium–tin oxide hole transport layer and aluminum-zinc oxide–doped cesium electron injection layer

Light-emitting diodes with perovskite luminophores have great potential in next-generation displays because of their exceptional color purity with narrow emission bandwidth, broadband color tunability, and solution processability. However, their low luminescent efficiency is a critical drawback. Here, we report the first demonstration of a multicolor, large-area, perovskite display, which can be made flexible by using an optimized perovskite emissive layer sandwiched between inorganic metal oxide charge transport layers, all of which are coated via a facile solution process. We show that advanced interfacial engineering, especially the energy level alignment at the interface, plays a vital role in determining the device performance because of its effects on charge injection, transport, and recombination. These devices exhibit maximum current and power efficiencies of 74.25 cd A^?1 and 89.72 lm/w for green emission, 21.40 cd A^?1 and 25.84 lm/w for red emission, and 15.21 cd A^?1 and 15.84 lm/w for blue emission, respectively. Furthermore, with the introduction of inorganic charge transport layers, these devices exhibit high environmental stability, and the encapsulated devices have operating lifetimes exceeding 450 h with an initial brightness of 1000 cd/m².     

Influence of Buckminsterfullerene Doping on Properties of Phosphorescent Homojunction Organic Light-Emitting Device

By p-doping buckminsterfullerene (C60) into a bipolar host 2,7-bis(diphenylphos-phorryl)-9-[4-(N,N-dipheny-lamino)phenyl]-9-phenylfluorene, the device efficiency of the phosphorescent homojunction organic light-emitting device (HJOLED) was pronouncedly enhanced. A two-fold enhancement in luminous efficacy compared with nondoped or MoO₃ doped HJOLEDs was observed by employing C60 as the p-dopant. The influence of C60 doping on the device performances of this HJOLED was investigated by carefully analyzing the J-V-L characteristics of HJOLEDs with different hole transporting layer. A white HJOLED was also successfully fabricated. The maximum brightness, current efficiency and power efficiency were 22700 cd m^?2, 12.2 cd A^?1 and 7.7 lm W, respectively. This device showed a warm EL spectra and the CIE coordinates was (0.41, 0.44) @ 10 V. Besides, this device manifested lower efficiency roll-off.