Synthesis,photoluminescence, and electroluminescence characterization of double tetraphenylethene‐tethered BODIPY luminogens

Three double tetraphenylethene (TPE)‐tethered 4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indance (BODIPY) fluorophores, 35TPEBODP , 88TPEBODP , and 26TPEBODP , have been synthesized and characterized. The green 35TPEBODP with deep red fluorescence shows serious thermal decomposition in the purification process of sublimation, which prohibits its test for an organic light‐emitting diode (OLED) fabricated by the vacuum–thermal evaporation process. The tethered TPE is attached to BODIPY at three different positions, resulting in different photoluminescence (emission wavelength and quantum yield) and electroluminescence (EL). Different from TPE‐tethered BODIPY fluorophores reported in literature, none of the BODIPY fluorophores studied here exhibits aggregation‐induced emission (AIE), aggregation‐induced enhanced emission (AIEE), or twisted intramolecular charge transfer (TICT) characteristics. Although solution (10^?5 M THF) photoluminescence quantum yields (?s) are relatively high at 78%, 68%, and 86% for 35TPEBODP , 88TPEBODP , and 26TPEBODP , respectively, which are all higher than 41% of PhBODP (a non‐TPE‐tethered BODIPY), the ? is significantly decreased to 1–6% in 5 wt% dopant polystyrene thin film or as a solid powder, except for 13% of 26TPEBODP . Therefore, due to the low ? of dopant thin film or solid powder, either dopant or nondopant OLEDs exhibit inferior external quantum efficiency (EQE) and intensity of EL. The best OLED in this study is the 26TPEBODP device, and its EQE reaches 1.3%, and the highest EL intensity is approximately 1,600 cd/m².     

Synthesis and crystal structure of two copper complexes with one-dimensional chain structures bridged by bipyridine ligands

Two copper complexes {[Cu(phen)(azpy)(H₂O)(ClO₄)](ClO₄)}_n1 (phen=1,10-phenthroline, azpy=4,4′-azobispyridine) and {[Cu(phen)(bpe)(H₂O)(ClO₄)](ClO₄)}_n2 (bpe=trans-1,2-bis(4-pyridyl)ethylene), have been synthesized and characterized. The X-ray analysis reveals that copper ion has distorted square pyramidal coordination environments in the complexes 1 and 2. The copper is coordinated by two N atoms of phen, two N atoms from two bridging ligand azpy in 1 and from two bridging ligand bpe in 2, one O atom of coordinated water. Due to Jahn Teller distortion the sixth site in 1 and 2 is occupied by one O atom from one perchlorate anion. Copper ions are linked to each other through bridging ligand azpy in 1 and bridging ligand bpe in 2 to form one-dimensional chain. Variable-temperature magnetic susceptibility studies show that there is a weak antiferromagnetic interaction between the Copper ions in 1 and 2.     

Synthesis of t-butylated diphenylanthracene derivatives as blue host materials for OLED applications

This paper describes the cost-effective synthesis and the photoluminescence of diphenylanthracene derivatives, which are found to be potential blue host materials for organic light emitting diode (OLED) technology.     

稀土配合物的光致发光和电致发光研究

报道了稀土配合物在光致发光和电致发光的应用,从结构和性能的角度,分析了沁同稀土配合物的发光特性以及不同第一配体和第二配体对光致发光和电致发光的影响。     

含铽三元共聚物的合成及其发光性能研究

报道了新型的可平衡电荷(空穴与电子)传输的稀土铽-聚合物发光材料的合成, 将稀土铽配合物单体与乙烯基咔唑、甲基丙烯酸甲酯共聚制得含咔唑和稀土铽配合物的HTL-EML-ETL三功能合一的聚合物, 通过FT-IR, GPC, NMR及元素分析对其结构进行表征, 并研究了这类材料的光致及电致发光性能. 在含铽三元共聚物的薄膜荧光中, 来自咔唑基的荧光出现“固态猝灭”, 而来自稀土铽离子的荧光则明显加强, 这是由于二者的失活机制不同引起的. 以含铽三元共聚物制作的单层器件主要发射铽离子的特征荧光.     

新型铕三元配合物的合成及光致和电致发光性能研究

利用氮杂苯并 [9,10 ]菲类中性配体 ,合成了两个新型铕三元配合物Eu(DBM) 3 L1和Eu(DBM) 3 L2 (DBM为二苯甲酰甲烷 ;L1,L2 为氮杂苯并 [9,10 ]菲类中性配体 ) ,以元素分析、红外光谱和紫外光谱对其进行了表征 .两种配合物在固体状态下的发射光谱都表现出较强的三价铕离子的特征发射 ,第二配体对中心离子具有较好的协同敏化发光作用 .以TPD和Gd(DBM) 3 bath (bath =4,7 二苯基 1,10 菲咯啉 )分别作空穴传输材料和电子传输材料 ,以发光配合物和TPD的共蒸镀掺杂作为发光层 ,制备了如下结构的三层器件ITO/TPD( 3 0nm) /Eu(DBM) 3 L1(L2 )∶TPD( 1∶2 ) ( 5 0nm) /Gd(DBM) 3 bath( 3 0nm) /Mg∶Ag ,并研究了器件的光电特性 .结果表明 :这两种配合物具有优良的成膜性和电子传输性 ,而氮杂苯并 [9,10 ]菲类中性配体对提高配合物的电子传输性起着至关重要的作用 .以Eu(DBM) 3 L1和Eu(DBM) 3 L2 作为发光材料制备的器件均具有较低的启亮电压 ( 3V) ,分别在 12V ,5 2mA·cm-2 和 13V ,42mA·cm-2 时获得最大亮度为 14 8cd·m-2 和 110cd·m-2 的纯正红色发光     

Synthesis of a highly phosphorescent emitting iridium(III) complex and its application in OLEDs

A rigid ligand benzo[de]benzo[4,5]imidazo[2,1-α]isoquinolin-7-one (biio) was designed and conveniently synthesized, and the corresponding bis-cyclometalated iridium complex (biio)₂Ir(acac) (acac = acetylacetone) was prepared. The light emitting and electrochemical properties of this complex were studied. The complex has the characters of simply synthetic procedure and strong phosphorescence. The electroluminescent device using this complex as dopant was fabricated. The device had the structure of ITO/NPB (40 nm)/Ir complex:CBP (7%, 30 nm)/BCP (15 nm)/Alq₃ (30 nm)/LiF (1 nm)/Al (100 nm). The maximum emission of the device was at 496 nm. The maximum brightness of the device can reach 79640 cd m⁻² with an external quantum efficiency of 12.1% and a maximum current efficiency of 31.7 cd A⁻¹.     

1-茚基二硅烷及二硅氧烷的合成及结构

通过茚基负离子分别与-氯五甲基二硅烷, 1,2-二氯四甲基二硅烷及1,3-二氯四甲基二硅氧烷作用, 制得三种1-茚基二硅烷及二硅氧烷类化合物。元素分析,UV, IR, 1H NMR及MS表征了它们的结构, 讨论了它们的谱学性质与分子结构间的关系, 晶体学数据a=0.7462(2), b=1.4439(3), c=0.9789(2)nm; β=108.12(2)°,V=1.0023nm3, Z=2, Dc=1.14g.cm^-3。偏差因子R为0.047。     

一种双核铕配合物的合成、光致发光和电致发光性质研究

合成了一个新的双核铕配合物Eu(TTA)₃(tpphz)Eu(TTA)₃(其中TTA＝去质子化的α-噻吩甲酰三氟丙酮; tpphz＝[3,2-a:2',3'-c:3',2'-h:2'',3''-j]四吡啶基吩嗪). 研究了该配合物的光致发光和电致发光性质. 一个四层电致发光器件ITO/TPD, 10 nm/Eu(TTA)₃(tpphz)Eu(TTA)₃, 20 nm/BCP, 20 nm/AlQ, 40 nm/Mg_0.9Ag_0.1, 200 nm/Ag, 100 nm表现出中心在633 nm处的宽带红光发射, 该宽带发射可能来源于双核Eu(III)配合物和TPD形成的激基复合物. 该器件的启动电压为10 V, 在18 V和135 mA/cm²时的最大亮度达146 cd/m².     

一种新型红色三线态喹喔啉铱(Ⅲ)配合物的合成及发光性质

利用2,3-二苯基喹喔啉和水合三氯化铱(IrCl₃?H₂O)反应, 合成了一种新型喹喔啉铱的配合物[Ir(DPQ)₂(acac)], 通过元素分析, ¹H NMR和HRMS对配合物结构进行了表征, 结果显示得到的是目标化合物. 利用紫外光谱和荧光光谱对配合物的吸收光谱和光致发光光谱进行了研究. 利用该材料作为磷光材料制备了结构为[ITO/NPB(30 nm)/NPB∶7% Ir(DPQ)₂(acac)(25 nm)/PBD (10 nm)/Alq₃ (30 nm)/Mg∶Ag (10∶1)(120 nm)/Ag(10 nm)] 的电致发光器件, 研究了其电致发光光谱. 结果表明, 配合物[Ir(DPQ)₂(acac)]在476和625 nm处存在单重态¹MLCT(金属到配体的电荷跃迁)和三重态³MLCT的吸收峰; 发光光谱结果显示, 在660 nm处有较强的金属配合物三重态的磷光发射; 电致发光光谱显示, 该器件的启动电压是4.25 V, 器件的最大亮度为4910 cd/m², 外量子效率为5.14%, 器件的流明效率为1.12 lm/W, 是一种新型红色磷光材料.     

Synthesis and properties of the chain-like polymeric copper (II) complexes bridged by bis(diphenylphosphino oxide)ethane

At room temperature, the chain-like polymeric copper (II) complexes bridged by bis (diphenylphosphino oxide) ethane (dppeO2), [Cu(dppeO2)X2]n[X=Cl(1), Br(2)] have been prepared and characterized by elemental analysis, 31P NMR, TG-DTA and X-ray analysis for [ CuBr2 (dppeO2) ] n The chain is composed of subunits containing tetrahedron coordinated copper (II) atoms. The four-coordinated copper (II) atom is ligated to another four-coordinated copper (II) atom through dppeO2. The coordination sphere of copper(II) atom is completed by two monodentate bromide and two oxygen atoms from bridging dppeO2. Crystal data are as follows: C26-H24CuP2BnO2, 0.50 mm× 0.40 mm×0.40 mm, monoclin-ic, space group: C2/c, λ= 0.07107 nm(Mo Ka), a = 1.2286(2) nm, b=2.0555(8) nm, c = 1.0652(2) nm, β = 97.366(9)°, V = 2.668nm3, Z = 4, Dcalc = 1.628 g·cm-3, R = 0.066; Rw = 0.091.     

亚铜配合物的光致发光与电致发光研究

亚铜[Cu（Ⅰ）]配合物因其低廉的价格、多样化的结构和独特的光物理性质一直备受关注.本文综述了常见磷光Cu（Ⅰ）配合物[Cu（NN）2]＋、[Cu（NN）（PP）]＋和（CuX）mLn（其中NN表示双齿二胺配体,PP表示二膦配体,X表示卤素,L表示含N或P配体）的光致发光与电致发光研究,揭示配合物结构与光学性质的关系,探讨近年来Cu（I）配合物在有机发光二极管（OLED）领域的应用研究新进展.     

影响稀土配合物电致发光性能的几个重要因素

在综述稀土铕和铽配合物电致发光研究进展的基础上, 重点围绕稀土材料本身, 探讨了影响稀土配合物电致发光性能的一些主要问题, 指出一个优异的稀土电致发光材料应兼具有良好的光致发光效率、热稳定性和成膜性以及载流子传输性能.     

Synthesis and magnetic properties of trinuclear copper(II) complexes bridged by dimethylglyoximate groups

Summary New three Cu^II-Cu^II-Cu^II homotrinuclear complexes have been synthesized, namely [Cu(dmg)₂{CuL}₂](ClO₄)₂ [L = 5-nitro-1,10-phenanthroline (5-NO₂-phen), 4,4-dimethyl-2,2-bipyridiine (DMbpy), tetramethylenediamine (TMDA) and dimethylglyoximate ion (dmg)^2-]. The magnetic susceptibilities of complexes (1) (L = 5-NO₂-phen) and (2) (L = DMbpy) were measured in the 4.2–300 K range, giving the parameters,J = -335cm^-1 (1) andJ= -327.5cm^-1 (2). The results demonstrate a very strong antiferromagnetic exchange interaction between the adjacent copper(II) ions.     

Monochromatic‐red‐light emission of novel copolymers containing carbazole units and europium–acrylate complexes

Nearly monochromatic‐red‐light‐emitting polymers with pendant carbazole and europium (Eu) complex were synthesized and characterized by Fourier transform infrared, elemental analysis (EA), ¹H NMR, ¹³C NMR, UV, and gel permeation chromatography. The photoluminescence and electroluminescence (EL) properties of these polymers were investigated. A single‐layer light‐emitting‐diode device of the structure (indium tin oxide/polymer P4/Al) was fabricated, showing the characteristic bright‐red EL of the Eu³⁺ complex at 614 nm at a turn‐on voltage of about 17 V. The EL spectrum, current–voltage, and emission‐intensity–voltage characteristics of the device were measured. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3405–3411, 2000     

Synthesis and characterisation of phenoxo bridged dinuclear complexes of copper(II)

A series of model complexes for the type III site, in oxidised hemocyanin, containing Cu₂(μ-0Ph)³⁺ core have been synthesised using a heptadentate ligand (H₃L) formed from the Schiff base condensation of triethylenetetramine and salicylaldehyde. The ligand provides one imine and one inbuilt imidazole nitrogen and two phenolic oxygen donors with both five- and six-membered chelate rings to each metal centre. In the pentacoordinated complexes [Cu₂(L)X]·nH₂O, a third exogenous bridging ligand is present. The TG curve indicates the loss of lattice water molecules between 70 and 125°C. The residue after decomposition is CuO above 550°C. Theg values of theX-band EPR spectrum of [Cu₂L(μ-OAc)]·2H₂O in methanol glass (77 K) are typical of a variety of bridged copper(II) dimers. The copper-copper magnetic interaction is dependent on the presence and nature of X in these complexes.     

Synthesis and magnetic properties of binuclear cobalt(Ⅱ), nickel(Ⅱ) and copper(Ⅱ) complexes bridged by oxamidate group

Four binuclear Co(Ⅱ), Ni(Ⅱ) and Cu(Ⅱ) complexes bridged by oxamidate (oxd) group have been synthesized, namely Co2(byp)2(oxd)(ClO4)2 (1), Co2(Me2bpy)2(oxd)(ClO4)2.H2O (2), Ni2(bpy)2(oxd)(ClO4)2.2H2O (3) and Cu2(Me2bpy)2(oxd)(NO3)2 (4). (bpy=2,2'-bipyridyl, Me2-bpy=4,4'-dimethylbipyridyl, oxd=oxamidate) The complexes are characterized by IR, UV spectra, EPR and variable-temperature magnetic susceptibility (4-300 K). The susceptibility data for. complexes 1 and 3 were least-squares fit to the susceptibility equation derived from the spin Hamiltonian H=-2J . S1 . S2. The exchange integral, J, was found to be equal to -3.62 cm-1 in 1 and -1.82 cm-1 in 3. This indicates a weak antiferromagnetic spin exchange interaction between the metal ions.     

Synthesis, characterization and magnetism of binuclear cobalt (II) complexes bridged by tetracarboxylato groups

Three new binudear cobalt (II) complexes with extended te-tracarboxylato- bridge have been synthesized and characterized, namely [Co2 (PMTA) (bpy)4] (1), [Co2(PMTA)-(phen)4] (2) and [Co2(PMTA) (NO2phen)4] (3), where PMTA represents the tetraanion of pyroniellitic acid, and bpy, phen, NO2-phen denote 2,2'-bipyridine, 1,10-phenan-throline; 5-nirto-1, 10-plienanthroline, respectively. Based on elemental analyses, molar conductivity measurements, IR and electronic spectra studies, it is proposed that these complexes have PMTA-bridged structures and consist of two cobalt (II) ions, each in a distorted octahedral environment. These complexes were further characterized by variable temperature magnetic susceptibility measurements (4-300 K) and the observed data were successfully simulated by the equation based on the spin Hamiltonian operator, giving the exchange integral J = - 1.02 cm-1 for 1, J = -1.21 cm-1 for 2 and J = - 1.18 cm-1 for 3, respectively. These results revealed the operation of antiferromagneti     

Synthesis of poly-yne polymers containing transition metals,disilane, disiloxane and phosphine groups in the main chain

The synthesis and characterization of metal poly-yne polymers containing disilane, disiloxane and phosphine groups in the main chain are described. The platinum and palladium poly-yne polymers were synthesized by polycondensation reactions between a metal chloride and an α, ω-bisethynyl complex in amines in the presence of cuprous iodide as a catalyst. The nickel poly-yne polymers were synthesized by an alkynyl ligand exchange reaction between a nickel acetylide and an α, ω-bisethynyl complex in diethylamine in the presence of cuprous iodide as a catalyst. The reaction of the platinum poly-yne polymer, containing disiloxane groups in the main chain, with copper (I) salts afforded adducts of η-²-bonded σ-acetylide polymer complexes. The reactions of the palladium poly-yne polymer, containing phosphine groups in the main chain, with transition-metal carbonyl complexes afforded polymer complexes which have phosphorus in the main chain-transition-metal bonds. A concentrated solution of the platinum poly-yne polymer containing disiloxane groups in the main chain forms a lyotropic liquid crystal in dichloromethane or 1, 2-dichloroethane.     

稀土配合物的光致和电致发光性能的研究

合成了一种新型的稀土配合物Tb(acac)3dad, 讨论了其光致发光的性质 . 以其为发射层制备了结构为ITO/TPD (50 nm)/Tb(acac)3dad (75 nm)/PBD (50 nm)/Al (400 nm) 的电致发光器件, 该器件的启动电压为7 V, 18 V时得到了最大亮度为62 cd·m -2, 发现器件的电致发光光谱与配合物Tb(acac)3dad的光致发光光谱有明显不同.