Functional Relations for the Order Parameters of the Chiral Potts Model

Following the method of Jimbo, Miwa, and others, we obtain functional relations for the order parameters of the chiral Potts model. We have not yet solved these relations. Here we discuss their properties and show how one should beware of spurious solutions.     

A Conjecture for the Superintegrable Chiral Potts Model

We adapt our previous results for the “partition function” of the superintegrable chiral Potts model with open boundaries to obtain the corresponding matrix elements of e^{−α H} , where H is the associated Hamiltonian. The spontaneous magnetization ℳ _r can be expressed in terms of particular matrix elements of e^{−α H} S ₁ ^r e^{−β H} , where S ₁ is a diagonal matrix. We present a conjecture for these matrix elements as an m by m determinant, where m is proportional to the width of the lattice. The author has previously derived the spontaneous magnetization of the chiral Potts model by analytic means, but hopes that this work will facilitate a more algebraic derivation, similar to that of Yang for the Ising model.     

Chiral Potts model with skewed boundary conditions

We obtain the transfer matrix functional relations for the chiral Potts model with skewed boundary conditions and find that they are the same as for periodic boundary conditions, but with modified selection rules. As a start toward calculating the interfacial tension in general, we here evaluate it in a low-temperature limit, performing a Bethe-ansatz-type calculation. Finally, we specialize the relations to the superintegrable case, verifying the ansatz proposed by Albertiniet al.     

The Riemann Surface of the Chiral Potts Model Free Energy Function

In a recent paper we derived the free energy or partition function of the N-state chiral Potts model by using the infinite lattice inversion relation method, together with a non-obvious extra symmetry. This gave us three recursion relations for the partition function per site T _pq of the infinite lattice. Here we use these recursion relations to obtain the full Riemann surface of T _pq . In terms of the t _p ,t _q variables, it consists of an infinite number of Riemann sheets, each sheet corresponding to a point on a (2N–1)-dimensional lattice (for N>2). The function T _pq is meromorphic on this surface: we obtain the orders of all the zeros and poles. For N odd, we show that these orders are determined by the usual inversion and rotation relations (without the extra symmetry), together with a simple linearity ansatz. For N even, this method does not give the orders uniquely, but leaves only [(N+4)/4] parameters to be determined.     

Studies on the Chiral Order Parameter in the Schwinger Model

Based on an analytical technique using a unitary transformation and the variational method, we study the chiral order parameter in the Schwinger model in the lattice formalism with Kogut-Susskind fermions. The fermion condensate (ψψ)fo r any coupling constant and fermion mass are calculated. Chiral symmetry is shown to be broken in the massless limit and good scaling behavior is obtained.     

Equivalence of the Two Results for the Free Energy of the Chiral Potts Model

The free energy of the chiral Potts model has been obtained in two ways. The first used only the star-triangle relation, symmetries, and invariances, and led to a system of equations that implicitly define the free energy, and from which the critical behavior can be obtained The second used the functional relations derived by Bazhanov and Stroganov, solving them to obtain the free energy explicitly as a double integral. Here we obtain, for the first time, a direct verification that the two results are identical at all temperatures.     

Free energy of the chiral Potts model in the scaling region

We explicitly calculate the free energy of the general solvableN-state chiral Potts model in the scaling region, forT<T _c . We do this from both of the two available results for the free energy, and verify that they are mutually consistent. Ift=T _c –T, then we find that - _c /t has a Taylor expansion in powers oft ^2/N (together with higher-order non-scaling terms of ordert, ort logt).     

Interfacial tension of the chiral Potts model

We calculate the interfacial tension of theN-state chiral Potts model by solving the functional relations for the transfer matrices of the model with skewed boundary conditions. Our result is valid for the general physical model (with positive Boltzmann weights) and at all subcritical temperatures. The interfacial tension has been calculated previously for the superintegrable chiral Potts model with skewed boundary conditions. UsingZ-invariance, Baxter has argued that the interfacial tension of this model should be the same as the interfacial tension of the general physical model. We show that this is indeed the case.     

Corner transfer matrices of the chiral Potts model. II. The triangular lattice

We consider a two-dimensional edge-interaction model satisfying the star-triangle relations. For the triangular lattice, the corner transfer matrices are functions of three rapidities: we show that they possess various factorization properties and satisfy certain equations. We indicate how these equations can be solved for the Ising model. We then consider the three-state chiral Potts model and obtain low-temperature solutions to the equations. The conjectured formula for the order parameter (the spontaneous magnetization) is verified to one more order in a series expansion.     

Free energy of the solvable chiral Potts model

Very recently, it has been shown that there are chiralN-state Potts models in statistical mechanics that satisfy the star-triangle relation. Here it is shown that the relation implies that the free energy (and its derivatives) satisfies certain functional relations. These can be used to obtain the free energy: in particular, we expand about the critical case and find that the exponent is 1–2/N.     

Corner transfer matrices of the chiral Potts model

We present some symmetry and factorization relations satisfied by the corner transfer matrices (CTMs) of the chiral Potts model. We show how the single-spin expectation values can be expressed in terms of the CTMs, and in terms of the related boost operator. Low-temperature calculations lead naturally to the variables that uniformize the Boltzmann weights of the model.     

Corrections to finite-size-scaling in two dimensional Potts models

High resolution Monte Carlo simulations are used to examine the finite size behavior of Q-state Potts models in two dimensions. For Q = 3 we find that at the critical point bulk properties are subject to much larger corrections to finite size scaling than were previously realized. For Q = 4 we find that corrections to finite size scaling are subtle and that the multiplicative logarithmic correction is insufficient to correct the dominant terms.     

Numerical results for the three-state critical Potts model on finite rectangular lattices

Partition functions for the three-state critical Potts model on finite square lattices and for a variety of boundary conditions are presented. The distribution of their zeros in the complex plane of the spectral variable is examined and is compared to the expected infinite-lattice result. The partition functions are then used to test the finite-size scaling predictions of conformal and modular invariance.     

Determination of the Order Parameter in Binary Fluid Mixtures

We propose a microscopic approach to the study of phase transitions in fluid mixtures. It is based on the collective variables method with a reference system. The problem of definition of the order parameter in a two-component fluid system is considered in detail. This system is described with two sets of collective variables: _k and _k. It is shown that the CV connected with the order parameter is _k=0 in the case of a gas–liquid critical point as well as in the case of a mixing–demixing phase transition. The relations between the microscopic parameters, temperature, density and concentration which determine the particular form of ₀ for each of these phenomena are obtained. Based on these results we will be able to construct an effective Ginsburg–Landau–Wilson Hamiltonian.     

Hamiltonian limit of the 3D Zamolodchikov model

A two-dimensional quantum Hamiltonian _N,M commuting with the layer-to-layer transfer matrix of the three-dimensional Zamolodchikov model is derived. This Hamiltonian is defined on a lattice ofN×M sites. The special casesN×2, 2×M, and 3×M are studied.This paper is dedicated to Cyril Domb.     

Algebraic Reduction of the Ising Model

We consider the Ising model on a cylindrical lattice of L columns, with fixed-spin boundary conditions on the top and bottom rows. The spontaneous magnetization can be written in terms of partition functions on this lattice. We show how we can use the Clifford algebra of Kaufman to write these partition functions in terms of L by L determinants, and then further reduce them to m by m determinants, where m is approximately L/2. In this form the results can be compared with those of the Ising case of the superintegrable chiral Potts model. They point to a way of calculating the spontaneous magnetization of that more general model algebraically.     

Critical Analyses of Order Parameter and Phase Transitions at High Density in Gross-Neveu Model

By critical analyses of the order parameter of symmetry breaking, we have researched the phase transitionsat high density in D = 2 and D = 3 Gross-Neveu (GN) model and shown that the gap equation obeyed by the dynamicalfermion mass has the same effectivenesss as the effective potentials for such analyses of all the second order and somespecial first order phase transitions. In the meantime we also further ironed out a theoretical divergence and proventhat in D = 3 GN model a first order phase transition does occur in the case of zero temperature and finite chemicalpotential.     

Critical Analyses of Order Parameter and Phase Transitions at High Density in Gross－Neveu Model

By critical analyses of the order parameter of symmetry breaking, we have researched the phase transitions at high density in D = 2 and D = 3 Gross-Neveu (GN) model and shown that the gap equation obeyed by the dynamical fermion mass has the same effectivenesss as the effective potentials for such analyses of all the second order and some specJal first order phase transitions. In the meantime we also further ironed out a theoretical divergence and proven that in D = 3 GN model a first order phase transition does occur in the case of zero temperature and finite chemical potential.     

Triangular lattice Potts models

In this paper we study the 3-state Potts model on the triangular lattice which has two- and three-site interactions. Using a Peierls argument we obtain a rigorous bound on the transition temperature, thereby disproving a conjecture on the location of its critical point. Low-temperature series are generated and analyzed for three particular choices of the coupling constants; a phase diagram is then drawn on the basis of these considerations. Our analysis indicates that the antiferromagnetic transition and the transition along the coexistence line are of first order, implying the existence of a multicritical point in the ferromagnetic region. Relation of the triangularq-state Potts model with other lattice-statistical problems is also discussed. In particular, an Ashkin-Teller model and the hard-hexagon lattice gas solved by Baxter emerge as special cases in appropriate limits.Supported in part by NSF grant No. DMR 78-18808.     

The Dilute Potts Model on Random Surfaces

We present a new solution of the asymmetric two-matrix model in the large-N limit which only involves a saddle point analysis. The model can be interpreted as Ising in the presence of a magnetic field, on random dynamical lattices with the topology of the sphere (resp. the disk) for closed (resp. open) surfaces; we elaborate on the resulting phase diagram. The method can be equally well applied to a more general (Q+1)-matrix model which represents the dilute Potts model on random dynamical lattices. We discuss in particular duality of boundary conditions for open random surfaces.