共查询到18条相似文献,搜索用时 637 毫秒
1.
2.
在束晕-混沌的小波函数控制已实现的基础上,给出了一种形式更为简单的小波函数控制器,并研究了束晕混沌的多周期间隔反馈控制方法.以控制初始条件遵从Kapchinshij-Vladimirskij分布的离子束为例进行模拟,结果表明,通过适当选择间隔的周期数和小波控制器的控制参数,仍能很有效地对束晕混沌进行控制,并能达到消除束晕及其再生现象的理想结果.研究结果可望为实用强流加速器的研制提供有价值的参考
关键词:
小波函数控制器
多周期间隔
束晕-混沌
强流离子束 相似文献
3.
4.
5.
研究了周期性聚焦磁场通道中,束晕-混沌的外部磁场滑模变结构控制方法。通过选择适当的滑模函数,根据李雅普洛夫稳定性条件,推导出外部磁场的滑模变结构控制器。模拟结果表明,在控制条件下,混沌变化的束包络半径能被控制到匹配半径。将该方法应用在多粒子模型中,实施每隔一个磁场周期就调节一次磁场幅度的控制策略,可实现对初始分布为K-V分布离子束的束晕-混沌的有效控制,束平均发射度降低了80%左右,束晕强度因子变为0,束流质量得到了很好的改善,消除了束晕及其再生现象。由于外部磁场是可测和可调的物理量,控制器简单且利于实现,研究结果可为强流离子加速器中周期性聚焦磁场的设计与试验提供参考。 相似文献
6.
本文系统论述涉及强流加速器等强流离子束装置中产生的束晕 混沌的复杂性理论与控制方法及其应用前景。强流离子束在核材料生产与增殖、洁净核能、放射性废物嬗变、放射性药物生产、重离子聚变、高能物理、核科学与工程、国防与民用工业和医疗等许多方面都有极其重要的应用潜力和诱人的发展前景。尤其是,近年来强流加速器驱动的放射性洁净核能系统是国内外关注的热门课题,因为它比常规核电更安全、更干净、更便宜。但是,强流离子束形成的束晕 混沌的复杂性现象已引起了国内外广泛关注,需要加以抑制、控制和消除这类现象,解决这一难题已经成为强流离子束应用中的关键问题之一。目前不仅必须深入研究这类束晕 混沌的复杂特性及其产生的物理机制,而且需要研究如何实现对束晕 混沌的有效控制,并寻求和发展其新理论、新方法和新技术。这就向强流离子束物理和非线性-复杂性科学及其技术提出了一系列极富挑战性的新课题。本文结合国内外的研究概况,根据我们多年来的研究成果,特别是我们首创性地提出了一些束晕 混沌的有效控制方法,它们包括:非线性反馈控制 法,小波反馈控制法,变结构控制法,延迟反馈控制法,参数自适应控制法等,进行重点的介绍。对上述课题当前的主要进展及相关问题进行系统的总结和比较全面综述的评论。最后 ,指出该领域今后的研究方向 ,以推动这个崭新领域的深入研究和应用发展。 相似文献
7.
共振、混沌与束晕形成 总被引:3,自引:0,他引:3
研究强流束中的非线性共振、混沌与束晕形成的关系.给出强流束中非线性共振范围的表达式及其随束流空间电荷效应变化的数值结果和图表曲线,提出由非线性共振而激发的束晕形成的空间电荷效应极限,并分析束晕形成的过程. 相似文献
8.
9.
10.
11.
12.
We propose and demonstrate high-quality generation of a uniform multispot pattern (MSP) by using a spatial light modulator with adaptive feedback. The method iteratively updates a computer generated hologram (CGH) using correction coefficients to improve the intensity distribution of the generated MSP in the optical system. Thanks to a simple method of determining the correction coefficients, the computational cost for optimizing the CGH is low, while maintaining high uniformity of the generated MSP. We demonstrate the generation of a 28×28 square-aligned MSP with high uniformity. Additionally, the proposed method could generate an MSP with a gradually varying intensity profile, as well as a uniform MSP consisting of more than 1000 spots arranged in an arbitrary pattern. 相似文献
13.
提出延时反馈半导体激光器双劈控制混沌方法,建立有劈控制的激光动力学物理模型.通过调节激光器外腔光路中的光器件劈去控制反馈光光程,改变了反馈光的延时时间和反馈强度,在物理上实现了延时时间和反馈强度的双参数混沌控制.数值结果证明该方法可以控制激光混沌到周期态,能使激光器输出光脉冲平均功率增加.
关键词:
混沌
控制
劈
双参数 相似文献
14.
Considering the time-delayed feedback and environmental perturbations in spin-crossover system, we construct a stochastic delayed differential equation to study the state transitions from the low spin (LS) state to the high spin (HS) state in spin-crossover solids. It is shown that the delayed feedback and noise can induce optical bistability and state transitions. The mean first-passage time (MFPT) of the transition from the LS state to the HS state as the function of the noise intensity exhibits a maximum, and the noise-enhanced stability is observed. However the MFPT decreases with increase of the delayed feedback intensity, thus the delayed feedback accelerates the conversion from the LS state to the HS state. 相似文献
15.
In the photorefractive wave-mixing system, fluctuation in the signal beam intensity of the photorefractive output with a reflection grating has been analyzed by employing pump feedback method. In this method, fluctuations of the photorefractive wave-mixing process not only induce the intensity fluctuation of the mixing waves but also induce phase fluctuation of the mixing waves. Thus, the phase of the pump and signal beams at the output surface fluctuates in time around a mean value. Using such a positive feedback method of a pump beams, the relative fluctuation in the photorefractive output signal beam intensity with respect to its mean intensity can be minimized significantly without reducing its mean intensity. The factors that control the fluctuation in the signal beam intensity, such as the phase fluctuation of the output pump beam, absorption strength of the material and the feedback reflectivity of the cavity mirrors, on the relative fluctuation of the output signal intensity in the photorefractive wave-mixing systems have been studied in detail. It has been found that the fluctuation of the output signal intensity relative to its mean intensity in the photorefractive wave-mixing system can be suppressed to larger extent by taking lower value of feedback reflectivity of the cavity mirrors which could exist at a higher value of absorption strength of the photorefractive materials. 相似文献
16.
A method is proposed to solve the problem of direction discrimination for laser feedback interferometers.By vibrating the feedback mirror with a small-amplitude and high-frequency sine wave,laser intensity is modulated accordingly.The modulation amplitude can be extracted using a phase sensitive detector(PSD).When the feedback mirror moves,the PSD output shows a quasi-sine waveform similar to a laser intensity interference fringe but with a phase difference of approximately ±π/2.If the movement direction of the feedback mirror changes,the phase difference sign reverses.Therefore,the laser feedback interferometer offers a potential application in displacement measurement with a resolution of 1/8 wavelength and in-time direction discrimination.Without using optical components such as polarization beam splitters and wave plates,the interferometer is very simple,easy to align,and less costly. 相似文献
17.
Modh P Backlund J Eriksson N Bengtsson J Kristjánsson S Larsson A 《Optics letters》2002,27(8):574-576
We experimentally demonstrate that a grating outcoupler used for complex beam shaping (spot-array generation) can produce unintentional optical feedback that severely disturbs the integrated in-plane laser that illuminates the coupler. Simulations show that these outcouplers, in contrast to conventional collimating or focusing outcouplers, tend to produce high levels of feedback in spite of the detuning used to suppress feedback. Further, this feedback is focused to high intensity in the laser gain medium. This focused light acts as a seed for the nonlinear self-focusing that causes wave-front distortion and filamentation, which degrades the beam quality. 相似文献